Рет қаралды 15,702
Gearwrench Composite Creeper: bit.ly/2CoAoag
Shop Tool Reviews:
Gearwrench has a new Mechanics creeper because some things can’t all be done on a lift. There are still those times when you find yourself on the concrete, under a vehicle. Let’s all admit it, it’s not fun to lay on a sheet of cardboard anymore.
The last creeper I bought was…well, I’m not sure, but this is it. You may say...that’s a pretty cool retro creeper with those early 90’s NASCAR trucks on there...they weren’t Retro when I bought this. As you can see, it’s long past it’s prime.
The new Gearwrench creeper is a 41” molded composite unit that is in itself, the frame. The contoured back and head area keep you inside the boundaries, and it’s pretty comfortable. Just under your shoulder blades and down to your lower back is a firm EVA foam pad, and there’s thicker EVA foam pad for under your head.
There is a metal plate on both sides of your head. This is made for magnetic-based lights to be attached. These actually work very well. I used them recently changing out an oil filter adapter gasket. Furthermore, the trays on either side of your body contain a magnet across the whole cavity. This provides an excellent area for wrenches, sockets, extensions, etc.
The Gearwrench Creeper includes 6x 3-inch ball-bearing casters that support the 300-lb capacity. This creeper has a bottom clearance of 2-1/8” and the composite board thickness is 1-1/8”. So, you basically need 3-1/4” more clearance under the vehicle than if you were just laying on your back. I vote for the Gearwrenc Creeper.
This Gearwrench Creeper will run you just over $100. There are a few copies out there that look similar, however, I didn’t see any others with the metal plates beside the head, and the magnetic trays. Check out the creepers on Gearwrench.com.