No video
Geo Tracker/ Suzuki Sidekick 4DR Body Lift
Рет қаралды 9,384
Күн бұрынCan't "Subscribe", "Like" or "Comment" , ?? Then you can still support the channel by buying us a cup of coffee if you like. www.buymeacoff...
Check out our NEW Amazon Storefront for Geo Tracker and Suzuki Sidekick Parts and Products. www.tuff-trail...
This Episode illustrates the steps required to install a 2 or 3 inch Body lift on a 4 Door Geo Tracker, Suzuki Sidekick, Vitara, Escudo and the Sun Runner.
The steps required to execute the 4dr Body lift is the same as the 2 door in our 2dr Body Lift Video illustrating such.
This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional.
Geo Tracker build, geo tracker, Suzuki samurai, geo tracker review, geo tracker restoration,1994 geo tracker, Suzuki Vitara, Suzuki Escudo, Pontiac Sun runner, Jimny, Jeep, Ford Bronco, TJ, YJ, CJ Side by side, Budget, Low cost off-road, 4x4 off-roading, Arizona Desert, Big Wheels and tires, Custom Tracker, Free Subscription, off road, Lift kit, 2” lift, 4” lift, Cal-mini, Rubicon, Jeep Cherokee, Low cost off-road Geo Tracker top speed, Geo tracker with 33” tires, off road geo tracker, geo tracker 4x4, overlanding geo tracker, desert overlanding, Off Road gear, Geo Tracker accessories, Geo tracker parts,
@agusmaniks 4 ай бұрын
Like this style
@tufftrails 4 ай бұрын
Cool, thank you this is what it looks like now... kzfaq.infotPNKFgXOB8U
@JohnDrivesAnything Жыл бұрын
The 4 doors are really growing on me.
@tufftrails Жыл бұрын
They are crazy popular in Indonesia and Australia
@JohnDrivesAnything Жыл бұрын
@@tufftrails Some of my new Tracker parts I got from Ebay came from Indoneia
@user-qq5us2op7i Ай бұрын
Hey cal! Yall did a good job, it looks good!... so did yall do the suspension lift with the cups on the coil springs and the spacers on the struts and 2" body lift on this little badass ride ?
@tufftrails Ай бұрын
YES, 2" puck suspension lift and a 3" body lift.
@user-qq5us2op7i Ай бұрын
I'm about to do a 2" body lift on mine but first I gta get my floor pans done. The mounts behind the front tires are rusted out and u can see it through the floor. I cut it all out all the rust. Now I gta figure out what to use for the floor brace and that's what ur lift bolts to... so idk maybe some u-channel. 🤷♂️
@tufftrails Ай бұрын
Might work...I have been pretty lucky with mine, they are all from the desert areas ...so I do not have much rust issues. Good Luck on your projects.
@leonarddan4824 10 ай бұрын
Good hunting vehicle
@tufftrails 10 ай бұрын
"YES" they are a very capable off road machines. Thank you for your comment.
@jotajotacastillorodriguez6160 9 ай бұрын
Hello what size of tire this is?
@tufftrails 9 ай бұрын
33x12.50x15 amzn.to/464FUcY wheels 10x15 amzn.to/469Oze8 They are OK off-road, but on regular streets they are heavy and it's hard to maintain highway speeds without down shifting... @@jotajotacastillorodriguez6160
@tufftrails 9 ай бұрын
33x12.50 x15 amzn.to/3ubT2zQ @@jotajotacastillorodriguez6160
@jotajotacastillorodriguez6160 9 ай бұрын
@@tufftrails wow thanks
@alexanderthegreat3674 5 ай бұрын
Can ideas on the 6 body studs? Mine need replaced. They are tapered with a plastic sleeve. But they are shot. Cant find a replacement for them.
@tufftrails 5 ай бұрын
Are you referring to the 8 bolts that secure the body to the frame? Our 94 had some serious rust issues so we just made steel plates and used them as patches with new bolts welded to the plates. Any bolt with the proper length should work. Probably not the answer that you were looking for....
@alexanderthegreat3674 5 ай бұрын
Ok. I have a game plan for the structure of the body but the studs themselves are rusted and the plastic sleeves that are slipped on the studs are busted in two. I was just wondering if I could use the same size regular bolt. And if I needed to use a sleeve to fit tight against the stock bushings. I could always weld a carage bolt to a washer then to the new sheet metal to use for new studs. I just can't find anything online about it and figure I'd ask you. Love your channel and thank you
@alexanderthegreat3674 5 ай бұрын
The front bolts for the body under the headlight are in great condition. I purchased the low range 2 inch body lift. It came with new bolts for the front. The 4 center studs were all rusted through so I need to figure out a game plan for the mounts under the front floorboards support crossmember and the rear cab corners.
@tufftrails 5 ай бұрын
Got it.. Mine had rusted out the 4 lower bolts, So what I did was cut out the rusted area back to good metal, removed about 4x4 inch Squares in my case. Then I cut some 3/32 plate into 4x4 patches. Drilled a hole in the center, slide the bolt in from the top, ...welded the bolt in place and then welded the patch to the area I had just cut out. Messy, but it works. this is a short kzfaq.info55kgiB7rY8A @@alexanderthegreat3674
@michaelllacik461 Жыл бұрын
Did you have to make any changes to the automatic shifter linkage
@tufftrails Жыл бұрын
No altercation are required on automatic transmission linkage. The transfer case shifter must be bent or extended to accommodate for the lift. Thank you for your question.
@BustedKneeAdventures 10 ай бұрын
Very nice. I really enjoy your channel. Would this be applicable to a 2001 Chevy Tracker 4 door as well? Also is any steering shaft mods needed?
@tufftrails 10 ай бұрын
Thank you, It is very similar to the 2nd Gen Trackers. On the 1st gen models it is recommended that an extension, of 1" be added to the steering shaft assembly. I have never need to do such on any of our Trackers. Thank you for your comment.
Tuff Trails
Рет қаралды 1,3 М.
What the Meowk!
Рет қаралды 9 МЛН
Hwy83 SUZUKI
Рет қаралды 99 М.
JensenTime
Рет қаралды 4,6 М.
Death Toll Racing
Рет қаралды 55 М.
TFLclassics
Рет қаралды 78 М.
Pa Salir Del Paso
Рет қаралды 29 М.
Balmer's Workshop
Рет қаралды 101 М.