Take a breath. Relax. Remember that nothing in life is permanent, all is temporary, all is borrowed.

I know that I absolutely am not spending premium money for pocket candy. Budget is very important for me

Buck 110, Buck 112, Buck 119, Kershaw blur and rat -7

Opinel, Sabatier, Joker, SAK and Leatherman. ❤😊

I actually had this happen to me. I had a decent collection of knives (fixed and folders), axes, and swords. Our house was broken into and all of it was stolen along with various other items. I took a couple years off before collecting again. I thought carefully about my collection and how it was used. Most everything was just stored but not used except the folders. I now have a better collection than I did, but mainly folders so they get used.

12:30 I thought I had lost my Wingman recently (luckily I found it) and when I went to check on the cost of replacement I was blown away. Double what I paid just a few years back.

I convexed my Gerber Prodigy, which is almost identical to the Strongarm, using my old Lansky clamp sharpening system. It goes normally from 17 degrees to 35 degress or so. I added slots for 15 degrees and 13 degrees. So I sharpened the blade to 20 degrees and then convexed off the shoulder by using the 17, 15 and 13 degree settings, and did some blending in between, still using the clamp, but just going along side the slots instead of in them. I've done this on a number of knives and it works great. I've replaced most of my Lansky stones with the DMT Aligner stone holder and stones. Having used both, DMT seems to have significantly flatter and longer lasting diamond stones in a wider range of grits and are about the same price. The Lansky alumina stones are very nice for finishing.

I totaly agree with the choice of JOKER and COLD STEEL. For a multitool I would check out the Swiss Army Knife model range.

1. Buck 110 Nickel Silver Drop Point, 420HC ($85); 2. Spyderco Dragonfly Salt, serrated ($80); 3. Mora Kansbol ($37); 4. Victorinox Harvester ($56); 5. Spyderco Bow River ($45).

Fixed blades : J&V Chacal Nieto Coyote Folders : Maserin Scout J&V Tucan Multitool : I'd go for a Victorinox (Or maybe the Gerber Truss just because a good friend of mine is very pleased with it).

When I was in highschool I was working for 6.15 an hour and bought my first knife which was a ka bar out of an army surplus catalog. I think I paid 60 bucks for it. I still have it and hopefully it never gets lost or stolen. I hope to pass that on to my kid someday. It has been through a lot but keeps on ticking. I've got custom knives now that I enjoy using a lot more but my ka bar will always have a special place in my heart.

I once got about 700 miles from home before realizing I forgot my tool pack. I stopped at a Walmart and picked up a $23 Ontario Rat 1, the $50 version of the Ozark Trail copy of Leather Wave (Good tool by the way) and a $50ish Gerber Prodigy I think. Then to Sportsman’s Warehouse for a $50ish Kershaw Camp 10 and $20ish Bacho Laplander. Think that was in 2019.

Thanks for the updates on budget friendly knives and tools . Much appreciated .

I have 10 cold steel knives and 4 spyderco if I had to start over the voyager would be too on my list, I always gravitate to it, hiking camping night waking, gardening. American lawman next and cold steel survivalist and Hunter, that would be my starter and of course the tinker SAK

I had my shop broken into between X-Max and New Years of 2014. I lost almost all my tools including knives. The good part is my collection is nice and new again. First knife I immediately replaced was a Benchmade 943. Many were no longer made and still would like to have again. Like a Lone Wolf T2 and Bark River Grasso-Bolo 2. I started researching knife values (for insurance reasons) and I’ve been hooked on knife channels since. I did get another Cold Steel Recon 1 and SRK for my outdoor blades then slowly started collecting again.

I carried Cold Steel Voyager tanto in both Afghanistan and Iraq, and many iirebyars other than those. It is an absolutely great blade. I love it so much I carry a Voyager Tanto xl everyday now , still

Hello knife people! Swiss army knife Trekker Fixed blade, more heavy duty compaion stainless. 80$ axe 2.5 pounds hultofors 25$ Swede bow saw 24inch Multitool, leathermen

I'm 42 yrs old and started collecting folders around 12 when I got my 1st Swiss Army knife. I had hundreds of knives and lost my entire collection not once, but twice. I'm starting on my 3rd now and times are tuff man. I just try to keep positive and take my time because it's my true love.

I've collected knives since my first cub scout knife that I earned in 1970. Had a house fire in 2015 that burned to the slab. Luckily all people and animals got out since it happened in the middle of the night. Nothing like corraling dogs, cats and kids in a burning house to wake you up quick. Ended up standing in the snow in our pajama's while the neighbor called 911. The barefoot trip in your pj's to Walmart to get basic clothes and supplies for the family was an experience. Lost everything that wasn't in my vehicle, rv or workshop. Rebuilding is slow and disheartening at times. Especially since we had just spent 2 years renovating and updating our dream house and were underinsured. The insurance company, who wasn't a good neighbor, wouldn't replace anything that I didn't have a picture or a receipt for. Of course, almost all evidence of ownership was in the house so... Don't trust the insurance companies, they are there to make a profit, not be nice to the customer. The employee's get their promotions and bonus's for NOT paying $$ to the customer. The lawyers and private adjuster's that you may need to hire to deal with the insurance company aren't covered in any policy. After over 3 years of fighting we ended up with about 66% (the apparent target % of most large insurance companies) of what they should have paid and that was with good lawyers and adjusters. Have backup pictures & receipts for everything stored offsite to make your life easier. So many items weren't being made anymore, those that were replaceable were usually several times the price. First blades replaced were my Esee's since they got daily use. Izula 2 and Esee 3 & 4. Then a few Cold Steel's. Don't really use multi tool's that often anymore so only one replaced was Leatherman Wave.

Over the years I’ve actually sold off almost all of my collection. I’m still a knife fanatic and really enjoy getting my hands on new blades. Lately I’ve really started to get into esee. I know these are all fixed blades, but personally these were a good investment with the lifetime warranty. I primarily carry one folding knife, and it’s the Buck 112 Slim. Been carrying it for a little over a year now and it’s been quite solid. Completes almost all my daily tasks and it wouldn’t be a headache to replace it.

1. Victorinox Huntsman 2. Civici praxis 3. Cold steel trail hawk 4. Mora companion stainless 5. Dexter Russell Green River hunter. I'd take my Spyderco Para 3 LW over the Praxis, I got it as a factory seconds for $53, but for MSRP I'll take the Praxis.

I would absolutely hate for my knife collection to be destroyed or stolen. Sooooo, I spent my $80 ($86, to be exact) on a file safe from Home Depot. It is fire-resistant. I put my favorite and most expensive knives in it. The ones that don't go in are either carried on my body--I usually carry 3-4 EDC--or are easy and affordable to replace. It's my way to be prepared before a fire happens.

Victorinox Spartan, Victorinox Compact, Victorinox camper, Victorinox SD, Victorinox Mountaineer

I love the Conspirator. I have the regular version as well as the KnifeCenter exclusive aluminum handled S35 blade version. Such a great knife!

Great list!

Man, this is a good topic to discuss! I will think a bit what I would choose and comment again

Really love voyager knives. I personally like the tanto. For a fixed blade my misted used is my mini Pendleton hunter. How can you beat $30. It’s small but has a good handle is great for cleaning game and fish. The only multi tool I use is a gerber dime. I don’t find multi tools useful. I’m a mechanic if I need a screwdriver nothing beats a real screwdriver. Next I would get a machete. My favorite is my new on the condor terrachete. An my saw corona.

This was a great vid definitely got me thinking about the gear I have and use in my collection.

Joker. Is. So. Awesome. They are going places.

I definitely agree with all of your choices.

I am going to have to put a lot of thought into this, but I am going to do a video response to this, and stick with the 2 fixed 2 folder 1 multi tool style you did. very cool video, and a lot to consider.

Happy Knife's day too

Tops steel eagle / war Bowie (whichever is available, knowing tops) and cut 4.0, Victorinox Huntsman and rambler, Leatherman Skeletool CX (which was under 80$ when I got it) + bit kit. I know this doesn't help with the 80$ cap. But this would be my first pick. Under 80$: cold Steel Recon tanto and mini tac (skinner if I can still find), Victorinox Huntsman, Leatherman Skeletool and a Kershaw leek with 14C28N blade. Throw in the bit kit from Leatherman for all the $$ saved. Skeletool as choice of multitool because I've never really needed a pocket knife since I got my skeletool CX. The 154CM blade has held out for almost a decade in humid tropical india without rusting and with minimal care. That + bit kit just amplifies the capabilities of the tool significantly. I carry a CUT 4.0 as my main blade + Skeletool Cx and a Victorinox Rambler on my keychain. This system has been working very well for nearly 6 years now.

Funny you would start the folder collection with a Cold Steel Voyager. I have probably 200 knives in my collection, and my Cold Steel Voyager clip point is my go-to knife for "dirty" or "beater knife" duties. There's just something about the design that screams "work horse," and it has taken every job I've ever thrown at it like a champ.

Another great video. Please consider a similiar 5 replacement knife video with no price limitations [or maybe a $300 limit?]

For around $55.00 the Cold Steel Voyager is Still the Best Hard Use , Tactical and Large EDC Blade on the Planet , just my opinion.... 👍🖖

1. Condor Hudson Bay. 2. Victorinox Pioneer X. 3. ESEE Caniru. 4. Spyderco Dragonfly. 5. Leatherman Skeletool.

Great idea for a video. We seem to be in the same wheelhouse with your picks. If I lost everything and was rebuilding a tool collection, my 100% first choice would be the Leatherman Wave+. The toolset on the Wave+ has everything I want and use regularly: scissors, pliers, screwdriver, blade, and file. Mostly though, as someone who relies on eyeglasses, not many tools come with a precision driver thay can be used on the tiny screws used in most glasses. The precision bits have also been very useful in repairing computers and other electronics. Number 2 would be the Gerber Strongarm, for all the reasons you mentioned. Number 3 would be the Fiskars X7 hatchet. Great for yardwork, great for camp work. Number 4 would be a Silky saw of some sort, probably a Pocketboy. Again, super useful both at home and at camp. Number 5 might be a weird choice for many people, but I'd probably have to pick up another Milwaukee Fastback. A disposable utility blade you don’t have to worry about sharpening comes in handy all the time, and having a solid centerdrive Phillips/flathead screwdriver on hand is always coming in handy. An honorable mention: the Boker Kalishnikov in XHP. I don't think this is still available, but it might be my most used knife. I carry it as a neck knife, and I've beat the tar out of it, and it just won't quit. The blade stays super sharp, is easy to maintain, and it is still as snappy as it was when i bought it years ago.

Buck 112, Rat 1, leatherman wave, Joker Erizo and Mora Garberg

I would go with the Voyager and Campero also. My multitool would be the Leatherman Sidekick. My EDC knife would be a CJRB Chord (button lock, flipper, and thumb studs). My big knife would be a Kershaw Camp 10.

Gerber strongarm, seal pup or seal pup elite, cold steel Air lite, large voyager, and Victorinox hiker

Buck 110 and Buck 119 is all I need

Vic Pioneer X alox and knipex pliers 5”, Esee izula, Kershaw leek, cold steel srk.

Cold steel is my daily beast

From the fix blades I would (actually, I did) prefer the Peltonen Knives M95 or M07 (have both of them). Great value for a small price.

The first knife I would go get would be a spyderco delica, yes I know it’s iffy to get in that 80$ price range now but I have a couple and it’s definitely one of my all time favorite folders I carry one everyday and I have knives 3-4 times the cost

Almost forgot it was knife day was out camping and had buck 112 cold steel airlite and pendleton lite also leatherman rebar all on me at the same time happy knife day everyone

You don't really need to oil your blade when you have it on you, only if you are storing it away for some time somewhere.

Aaron, I can get behind your first pick Joker. You mentioned my multi tool pick with the Rebar because I don't mind a sheath. But... Instead of buying 2 pocket folders that I don't use anyway, I would spread that $160 budget over 2 fixed blades. My current EDC is the Buck Alpha Hunter, large one, and I would go with the Spartan/Harsey fighter by KABAR for my bigger fixed blade.

I thought for sure someone would post a comment regarding the 'blood groove' comment. 😀 great video.

I really enjoyed this video. Great choices and combination. I saw Maxlvledc's too and it was awesome

Folding knives - same Fixed Blade - QSP Bison Chopper - Terava Skrama Multitool - Leatherman Rebar ✌️

Just ordered sp10 2 days ago on Amazon 77 bucks they have many. Happy Trails

1. Leatherman 2. Estwing axe, hatchet or tomahawk 3. Spiderco Delica or Endura 4. Ontario machete 5. KA-BAR

I’d grab a Leatherman Rebar, Kershaw Leek, CJRB Pyrite, and I don’t have much use for a fixed blade so instead of two fixed blades I’d have to replace my Buck Ranger Sport 112.

Fixed blade- Alpha dog by off grid Folder- Pro-tec SBR solid Literal David and Goliath 😅

-Mora Kansbol -Leatherman Skeletool -Streamlight Microstream USB -Silky Saw Gomboy -Husqvarna Hatchet Then i would save to buy a Spyderco Pm2, a QuietCarry Waypoint then a CRK Large Sebenza and i would be happy with that stuff

Even though it's scandi, I'll stick with my BPS ADVENTURER. My multitool choice is wave+ and for folding edc I have an antique 3 bladed old timer. Great video

Only one of what i would replace without question are under $80: leatherman surge, spyderco spydiechef, cold steel srk 3v, granfors bruk small forest axe, c.k. tools electricians scissors

Coldsteel SRK in SK5!

Mine: 1. CS AD10 Lite Tanto 2. RUIKE Jager 3. Mora Bushcraft Black carbon 4. Condor El Salvador Machete 5. Two Sun TS502

Esee 3, Esee junglas, Emerson A100, benchmade grip

If you can spare the money a good gun safe is the way to go with a good fire rating . You can put everything in it , documents , picture, coins , jewelry etc. and of course the knives . Money well spent . It's not a 100% but it's a decent deterrent against dirt bag thieves

I have a couple hundred knives. If I lost them all I wouldn’t start over😢. I would buy a Swiss Army Ranger, a Buck 112 and a good Cold Steel fixed blade. Leatherman Wave if I could find one for that price.

Has already happened to me once unfortunately. Your perspective is interesting for sure. Good video.

It is so cool, even though you are sponsered by so many and got very expensive knifes that you choose those ones - this really seams like a neutral advice for me. I would have bet that the first you name would be ESSEE - how wrong was I - lol. Thanks for this video

I'd start off with the Cold Steel Voyager and SRK . A Buck 110 , and 2 I could randomly find in a store asap. Can you tell Cold Steel to do an S35VN G10 Voyager. Holy crap I'd pay the $125!

In place of the Gerber Strongarm,I'd choose either GSO 4.7 or TRC Mille Cuori.A Victorinox Spirit X and Explorer,would be my edc. My foodprep/camp knife,would be the LT WRIGHT Genesis in flat grind.

I played a similar game with myself. What If I had to get rid of all but 3 items out of my stuff, what would I keep? (out of fixed blades, folders and multi-tools) I came up with...Fixed blade: Joker Lynx. Folder: Swiss Army Farmer X. Multi tool: Leatherman Skeletool. What if I had to pare it down to two???

The strongarm is my favorite

Here’s an idea go try your local pawn shops I’ve picked up a Benchmade Nimvara for $45. in excellent condition (excuse the spelling) & a Victronix multi tool for $ 45. both were in “excellent condition” 👍🏼👍🏼😎

I’m glad the threshold is $80 so I’m only losing one of my 5. My multitool can continue as the Leatherman Bond, folding knife has been a Buck 110 on my belt everyday for 47 years and that ain’t changing so the 110 and for that rate occasion I travel to a stupid 3” blade location the Buck 110 gives the Buck 112 a few days of work. My small fixed stays as my Izula II and the one loss is my big fixed as the ESEE 6 is outside the $80 range so the Buck 119 will fill that role. So my 5 is Buck 110, 112, 119, ESEE Izula II and Leatherman Bond.

Mora Heavy Duty stainless, Mora companion. Estwing sportsman axe. Cold steel AK 47, Buck 119, Eka W12, Cold steel Rajah 2, Tramontina bolo machete👍😁

I would take the cash from the 5 junk knives an buy a medford personally! ❤ no hard fellings just real thoughts!

What about your long time favorite?! The Spyderco Manix 2 LW?!

For celebrate National Knife day ,finally purchased my Leatherman P4!!!🎉🎉🎉😂😂😂🇺🇲For many years waiting for that.Price finally went downto nmy pocket😊😊👏👏👏🔪🔪🔪

I’d go to a resale shop, buy a five dollar ball bat, go break a few bones on the guy who stole my stuff, and take it all back! Much less expensive.🙂

1: full tang - Terävä Jääkäripuukko 110, 80crv2 Carbon Steel $78 USD 2: full tang - Watchman W204, 14C28N stainless steel $28 USD 3: folder - Sanrenmu 910, 12C27N stainless steel $20 USD 4: Folder - Ganzo 720, 440C stainless steel $28 USD 5: Multitool - Daicamping DL30 $36 USD So, $190 USD plus a bit of shipping, but under $220 USD all in.

Unfortunately the large clippt voyager had been discontinued by csk

I think man’s first tool was the rock! Don’t forget, he needed a rock to chip the stone into the first knife.😊

My Esee 4 in S35VN would be my first blade I’d get back, Garberg 2nd

Ok, Aaron this is silly, now KZfaq is giving me home work! Fine, this is an interesting idea…. In order of importance: Victorianox classic SD $ 21.34 (who has just one of these???) Rat 2 d 2 $ 40.99 (if I could only have one knife.) Leatherman Skeletool $ 74.95 (this was tough… hard to replace my sog baton) Holtzman gorilla nec knife $ 29 95 (not a neck knife great all around camp tool that doesn't get side eye from park rangers, DEM, or scout moms!) Buck 119 $ 67.99 (for when the winds are blowin' and nobody is judging)

With the knowledge I have now(and propensity to buy American), there’s few things I’d pick under $80. Tough proposition really.

Every choice i would make is over 80 bucks. Im starting with a Leatherman Wave+ 100 bucks. It just gets more expensive from there. All my knives get used.

C'mon Aaron, you know what Job said.

happy knife day

My 5 would be 1) Kizer maverick harpoon 2) Kershaw leek 3) Spyderco delica 4) civivi elementum fixed 5) leatherman wave

I lost mine a few years ago when my house was robbed I had quite a few expensive knives, all my mel pardue knives , old benchmade, strider buck strider, emerson cqc7 , micro tech tanto For a 80 dollar ill choose a cold steel fixed blade tanto, terrasaur, kabar becker bk40 boker plus atlas, letterman wing man

80×5=400. Forgive me for getting a Bark River ULB, a Leatherman P4 and a Swiss Army Knife. I wouldn't get 5 ehh tools. I'd get 2 or 3 I love.

Victorinox officers , mora hd companion,spiderco endura 4 and a machete

If my collection were burned to the ground I’d actually be fairly upset. Two of the knives I have were designed by me, so they’re quite special to me. My secondary concern is of my EDC knife, which should be fine. I’d definitely have pants on before running out of my house if it were on fire, so I’d have my shaman on me at least

Something like this happened all my knives gone still rebuilding.

The campero in k720 is the better choice. Rockwell 63-65 and hold its edge like a champion

think it's perfect list except wit one item being bases covered all cuts more tools would be good wit multi tool 10fir Rowkeydokey stay sharp

Schrade Schf 36 and 37 ($35-$40), cold steel spartan folder($74), cold steel 4max scout($84), cold steel sr1 lite($55) (and I'd cheat a lil and sneak in a small one! )civivi baby banter in s35 knife center exclusive!!($87) Some went a lil over, but the first 2 saved more than enough

What about victorinox multitools?

Hmm if it was all gone? Id probably take my Mora Kansbol as a fixed blade. Now for folders id want an axis lock knife. Luckily there are many now to choose from. I lobe my Freek and mini Crooked river but maybe id try a new one out!. For spyderco, id actually skip all of them except for one. A spyderco Kapara. The compression Lock and the blade design are too good and its the best spyderco i own with the Sliverax as a secondary. Thats 3 so far so id also add a Front flipper into the mix because i love them to death. If i could find a WE Shamwari, id get that in a heart beat, but id take any similar shaped knife. Id skip the super thin front flippers that ive bought before. And last, if get a Drop Laconico Keen. One of my best and prettiest normal flippers and my favorite. Im rocking a bright purple one now, so maybe id try a different colour. That's 5 but lets me honest, id try to buy more cheap knives like the CJRB Pyrite button lock, and new civivi knives and such.... because collecting is half the fun

Yea Buck 110 for sure

I couldn’t do it… all my blades have a different purpose… and most of them are over $100 lol My esee 6 and jg3 are my heavy hitters for hunting and outdoor use

If I lost my blades and had to get a new set of tools, I would not limit myself to $80 per knife. Some of them would be well under $80, and some of them would be well over $80. I would simply be getting what I use & need with the "buy once, cry once" mentality instead of getting something that I'll only end up replacing with something later.