20. Basic Panelmaking

Рет қаралды 12,869

Жыл бұрын

A simple way to make a basic fielded-panel using a fielding plane.
Visit www.blackburnbooks.com for books and to sign up for lessons in Woodstock NY.

Пікірлер: 64

@spyderlive 2 күн бұрын

Sound of Music! Fascinated by the Traditional Woodworkkng, hugs from Tuscany

@jack002tuber Жыл бұрын

PBS for years had two woodworkers, one did everything with a power tool. the other did it all by hand, even a foot powered lathe. We all know what one you are. This is good work. I hope the craft is kept going in future generations

@gjbmunc Жыл бұрын

Me too, thanks. I think it helps in an increasingly automted age.

@chiplane3976 Жыл бұрын

I enjoyed this Graham - I always think you do this so well - single topic, short videos, packed with information. Thanks!

@gjbmunc Жыл бұрын

You're welcome!

@coreygrua3271 Жыл бұрын

The “thank you” goes to you. Mr Blackburn. Your sharing is much appreciated and very interesting. I particularly appreciate Sellers, Krueger, and Blackburn. You’re all patient and practical.

@gjbmunc Жыл бұрын

Thanks so much!

@ikust007 Жыл бұрын

Love those antique technic /tools showed. I am unplugged and always learning . Didn’t even know a plane like this existed!

@gjbmunc Жыл бұрын

Glad you enjoyed it!

@jimfromri Жыл бұрын

The sound of a sharp plane slicing through wood really is music. Thank you for sharing your expertise.

@gjbmunc Жыл бұрын

You're welcome!

@thomashverring9484 Жыл бұрын

Wonderful! This is just what the doctor ordered! Nothing is more wonderful than working wood with traditional hand tools. I'm not opposed to machines, but the joy of the material, the sounds of a wooden plane or an auger bit in your brace, the smells-is pure bliss.

@gjbmunc Жыл бұрын

Couldn't agree more!

@5StoryWoodWorks Жыл бұрын

You make it look like child's play, thank you for sharing your knowledge, sir.

@gjbmunc Жыл бұрын

You're very welcome!

@rollingstone3017 Жыл бұрын

I truly enjoy the quiet traditional hand work. I get really tired of seeing all the shops filled with very expensive power tools. Unless one is a manufacturer, and sells their work professionally, I just can't see the justification. I certainly understand the lure of power tools. We tend to want skill and precision, right now!! And it takes practice as well as patience. Thank you so much for sharing you experience.

@gjbmunc Жыл бұрын

Well said!

@dyderich Жыл бұрын

Thank you for sharing your knowledge

@gjbmunc Жыл бұрын

My pleasure

@haroldschultz5864 Жыл бұрын

You always make it look so easy . Cheers to all your generous tips . Blessings

@gjbmunc Жыл бұрын

You're welcome!

@luismigueldominguez5487 8 ай бұрын

Excelent video,master,thanks,🙏🙏👍👌

@gjbmunc 8 ай бұрын

So nice of you

@KOutOfMyYard Жыл бұрын

I always enjoy your videos bc you impart so much knowledge!

@gjbmunc Жыл бұрын

Thanks so much!

@transmundanium Жыл бұрын

That's a nice plane. I couldn't find one easily so I made one, a top escapement version.

@gjbmunc Жыл бұрын

Good for you!

@bcdwalleye6242 Жыл бұрын

Excellent channel. I enjoy this and learn a bit every video.👍

@gjbmunc Жыл бұрын

Glad to hear it!

@1deerndingo Жыл бұрын

Could you demonstrate how you would use a combination plane to perform the various tasks you have been demonstrating with moulding planes. It would be1. unique, 2. very useful, and 3. assist in preserving them.

@gjbmunc Жыл бұрын

On the schedule for some time in the future. Stay tuned.

@ikust007 Жыл бұрын

Funny to see the electrical routers on the floor:)

@gjbmunc Жыл бұрын

From a previous life when I had a much larger shop.....!

@jsmxwll Жыл бұрын

thanks for the video

@gjbmunc Жыл бұрын

You're welcome

@keithswoodshop1193 Жыл бұрын

Amazing, I know what this weekend has for me.

@gjbmunc Жыл бұрын

Have fun!

@wehaveasaying Жыл бұрын

Wonderful!

@gjbmunc Жыл бұрын

Many thanks!

@kentonward97 Жыл бұрын

I love this look and raised panels but getting a hold of a plane like this is not easy nor cheap. So I would love to see if this look can be achieved with a regular smoothing plane ?

@gjbmunc Жыл бұрын

Might be easier with a block plane, especially a rebated block plane.

@dpmeyer4867 Жыл бұрын

thanks

@gjbmunc Жыл бұрын

You're welcome!

@stoiulicu 5 ай бұрын

Thanks for your sharing! How many milimeters do you let empty in those grooves for the wood movement?

@gjbmunc 5 ай бұрын

Depends on the wood species and the location, but often at least 1/2 centimeter

@CandidZulu 3 ай бұрын

I just read that PVA was discovered in 1912, but when did it come on the market in glue form. Elmer's Glue was a casein glue for a long time if I understand things correctly!?

@gjbmunc 3 ай бұрын

Not really a glue expert, which is one reason why I like Gothic furniture that relied on tight joints - such as draw-bored motise-and-tenons.

@tuffymartinez Жыл бұрын

Thank You Graham......TM

@gjbmunc Жыл бұрын

You're welcome!

@ucenicul Жыл бұрын

Thanks for the video and information. How do you determine the size of the panel (width and length), that is, how much you leave for the movement of the wood. Is there a magic formula depending on the size of the panel?

@gjbmunc Жыл бұрын

The grooves should be deep enough to allow for any possible expansion of the panel withouth pushing the frame apart, and at the same time deep enough that no matter how much the panel shrinks it still stays in the frame - both of which facts depend on the possible expansion and contraction of the panel which is a function of the species of wood and the environment. Try and check out both facts by learning as much as possible about the particular species (use the online Depr of Agriculture 'Wood Handbook' and the weaather conditions for the intended location of the piece. (I have got this wrong a number of times!!

@ucenicul Жыл бұрын

@@gjbmunc Thank you very much for the reply, kind as always.

@robnichols9331 Жыл бұрын

I enjoyed that. Could you give a guide as to how you measure the panel so that it is the right size? How much play would you recommend leaving for expansion?

@gjbmunc Жыл бұрын

@robnichols9331 Жыл бұрын

@@gjbmunc Thank you Graham. Damn and I thought there might be a short cut. 😁 I presume you mean this document: www.fpl.fs.usda.gov/documnts/fplgtr/fpl_gtr190.pdf. Looks like I've got some reading to do. Thanks again for a great video and the follow up advice.

@frankhill9527 Жыл бұрын

Hi Graham can you do that with a number 5 metal plane? I don't have a fielding plane and no funds to get one at this time?

@gjbmunc Жыл бұрын

Yes, but it's harder to 'field'a raised panel.

@mr.intolerance Жыл бұрын

How can i do it without a fielding plane?

@2tall54 Жыл бұрын

Take a look at Paul Sellers doing this with a Stanley No. 4 plane here: kzfaq.info/get/bejne/g6eVrdqVsNCyYo0.html

@mr.intolerance Жыл бұрын

@@2tall54That"s what i"ve Bern looking for. Thank you.

@gjbmunc Жыл бұрын

You can always use a rabbet plane as shown to make the tongue to fit in the panel's groove, and then use the same rabbet plane (or a wider one) with a fence attacched to the panel to plane the sloping part - even producing a 'raised' center field if you like.

@mr.intolerance Жыл бұрын

@@gjbmunc Thank you. I will try that.

@PeteLewisWoodwork Жыл бұрын

It's not a rabbet, it's a rebate!

@gjbmunc Жыл бұрын

You're quite right, but as George Bernard Shaw (and sometimes Winston Churchill) once said "America and Britain are two countries separated by a common language". Being originally English I prefer to keep 'rebate' for a monetary dispensation, and use 'rabbet' (which actually comes from the French 'rabattre' meaning to beat back and which seems to make a little more sense in the woodworking technique) for woodworking; but I confess I frequently get them mixed up having been here (in America) for so long. Hope you understand.