#BeachGlitterTumbler #GlitterTumblerTutorial
*Disclosure: I only recommend products I would use myself and all opinions expressed here are our own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. This helps support our channel so we can continue to provide you with inspired and focused content. Thank you.
👇 SHOP MY EPOXY PRODUCTS AND MORE 👇
🖤 www.flynnsisterssupplyshop.com
EPOXY:
🖤 Fast Cure and Artist Cure Formula
🖤 www.flynnsisterssupplyshop.co...
🖤 New customers get 10% off with code FSWELCOME
🖤 FSX Members save 15% all the time!
Sign up here: www.flynnsistersboutique.com/...
This is the first of probably a few beach glitter tumblers we’ll be doing tutorials on! I love beach tumblers and this version is definitely one of my favorites!
STEP 1: Make sure your tumbler is sanded, cleaned and free of all debris. You’ll want to wash out the inside with warm dish soap and water. The tumbler shown in this video is a 20oz traditional from www.crafthaven.com/20oz-Tradi... 🖤 use code FLYNNSISTERS for 10% off!
STEP 2: Spray paint your base colors with the following spray paint colors.
Top blue color: amzn.to/2XcpnSS
Middle teal color: amzn.to/2TncSTd
White wave color: amzn.to/2Xfwn1t
Gold bottom sand color: amzn.to/3gamTgw
STEP 3: dry your spray paint in front of a small space heater (do not leave unattended) until paint is dry and cup will be warm. Apply less than 1-2ml of epoxy and apply glitter. Start with the chunky glitters first and use the smaller cuts to blend. All the glitter shown in this video can be found here www.peachyoliveglitters.com
Colors used: Earmuffs, Lapis, Semper Fi, Head Over Teals, Weesley, Weekend at Bernies (or Mr. Lomax), Parabatai, Bliss, Athena, Goldmember
STEP 4: allow the glitter layer to dry for 2-3 hours and seal with a clear gloss spray paint. We prefer this one amzn.to/3d2nCOE
STEP 5: apply epoxy layer. For this 20oz tumbler we used about 40ml to coat the first layer. Allow that to dry on the turner for at least 4-6 hours. Then apply about 15-20ml of epoxy and mix 1 drop of epoxy dye into 5ml of epoxy and use the white dyed epoxy to create the waves.
STEP 6: after at least 8 hours sand as needed and apply your decal. Apply final layers of epoxy.
Find the SVG I used for this design here: www.etsy.com/listing/61641590...
Get Social with Flynn Sisters!
Facebook group: / flynnsisterscommunity
Facebook page: / flynnsistersboutique
Instagram: / flynnsistersboutique
KZfaq: / flynnsistersboutique
Are you loving our videos? Thank us with a small donation to our channel or buy us coffee: tinyurl.com/yx2fcwjt