Glue Pull Tab Review and Tapping | PDR Dent Repair Tutorial

Рет қаралды 421,810

Күн бұрын

⚠️ 70% OF MY VIEWERS ARE NOT SUBSCRIBED TO MY CHANNEL. PLEASE CONSIDER HITTING THE SUBSCRIBE BUTTON. THANK YOU! 👍
If you like professional pdr tutorials and want to learn the fastest online then you seriously need to consider 👉 www.denttrainer.com
This was originally shot live on htttps:// denttime so follow if you want to see exclusive tips and pdr techniques. 👆
0:00 start
1:01 glue pulling tools
4:12 choosing tabs
5:12 dead on dent center tabs
5:57 main 1st pull
6:45 main 1st tap down
9:02 reaper tabs (main pull 2)
12:31 main 2nd tap down
14:04 tool summary
⬇️ Personal PDR Training & Main Website ⬇️
www.myketoledopdrtraining.com
⬇️ Learn Paintless Dent Removal Online ⬇️
www.denttrainer.com
🎧 Dent Time Podcast ⬇️
www.denttimepdr.com
---------------------
👉 Follow us on Instagram / denttime
👉 Follow us on Facebook / denttime
👉 Follow us on Facebook / denttrainer
-----------------------
📞 CALL 👉 800-420-DENT (3368)
💬 TEXT PHOTOS 👉 858-943-9676
-----------------------
We come to you 🚗 Mobile Service or
⬇️ Come to us! ⬇️
Dent Time
👉 2120 West Mission Rd. Ste. 240
Escondido, CA 92029
-----------------------
✅ Satisfaction guaranteed
✅ Mobile service
✅ 5 ⭐️ ⭐️ ⭐️ ⭐️ ⭐️ company
🚫 No repainting
🚫 No Car fax report

Пікірлер: 121

@sydrider6023 Жыл бұрын

Did my first attempt at this today on my SUV, about 6 door dents, took me about 7 hres but the result is satisfactory and can't wait to see the result under day light tomorrow. 🤞. Thanks for this super interesting demonstration.

@denttime Жыл бұрын

Sure. You should also check out my tutorial website denttrainer.com thanks again

@floorpizza8074 Жыл бұрын

How did it come out?

@dentdingking4878 2 жыл бұрын

Super nice video Myke! I'm having very good luck with the reaper tabs too. They stretch when I get a really hard pull but they do the trick! I'd rather stretch a tab than fuss forever with a stubborn pit.

@KarlBrouillette 2 жыл бұрын

Thanks. Really like your demonstration. I had a try earlier before your video and was a bit disappointed. But I feel I can keep trying.

@dentevo2259 2 жыл бұрын

Awesome demo, tutorial, and edit Myke! 🔥💯

@denttime 2 жыл бұрын

Thanks Joe Dentevo.com 👊

@billstetler6769 9 ай бұрын

Excellent demo. Thanks

@finley614 2 жыл бұрын

That was a great demonstration

@brunohelderbh 2 жыл бұрын

Show 👏🏼👏🏼, parabéns pelo ótimo trabalho, saudações do Brasil 🇧🇷 🙋🏻‍♂️

@ramymarty7149 2 жыл бұрын

Thank you so much, I think you helping people with gaining more knowledge in that industry thank you so much for the good deed

@paulc80 2 жыл бұрын

Clean the surface with alcohol and let the glue dry for a few minutes. I’m just learning myself but I’ve figured that out so far. Also, put the glue on the tab and the dent!

@osamaalmustafa3405 2 жыл бұрын

Thank you Myke for the demo, I was thinking about buying them

@denttime 2 жыл бұрын

My pleasure. Thanks for checking the video out. 👊

@Osdol 2 жыл бұрын

Great content. Very thorough and helpful techniques. Very positive energy. Thank you

@marcustoms 2 жыл бұрын

Thanks for sharing I learned so much.

@mayankkakkar2945 2 жыл бұрын

awesome video, can you please share the link to the light you are using during this task. thanks in advance!!

@vincrossi 2 жыл бұрын

Very nice job..greetings from Italy

@louistorres 6 ай бұрын

You are an amazing artist. Thanks for posting your videos.

@denttime 6 ай бұрын

Thank you! Cheers!

@Vision42_ 11 ай бұрын

Exellent bro, absolutely Exellent

@miamirice6840 3 ай бұрын

that’s some impressive work

@ingioern 2 жыл бұрын

Im so hooked on these vids. Imma learn this shit, looks so satisfying

@denttime 2 жыл бұрын

You’ll love denttrainer.com then 😉

@klanglala7577 2 жыл бұрын

Man this is a great video.

@francof7720 Жыл бұрын

The glue looks so good when removing it. By the way, what kind of material are the TABS made of?

@rodolfoluiz341 Жыл бұрын

Perfeito!!! Mesmo não entendendo a língua consegui entender as ações!!!!!! Se puder queria comprar um luz com esses efeitos.....grato Brasil

@namtrinh6142 Жыл бұрын

You are professional 🎉

@RayanTurkman Жыл бұрын

This is so professional

@hussainal-sarraf5679 Жыл бұрын

Good job, I wondered if you could show, how the technician could decide the right angle when installing the LED light? Moreover, do all LED lights give the same showing or is there a different type of it? how could I select the best one among them, If I would like to buy it?

@grahamhubsch9610 Жыл бұрын

Flipping amazing bro 🙌 👏 👌 🔥🔥🔥🔥

@denttime Жыл бұрын

Thanks 🔥

@shkenctari1 2 жыл бұрын

very good i subscribed

@gersonjesusdelreygutierrez3700 2 жыл бұрын

Como y donde puedo comprar sus productos? Gracias por los videos

@sasa111 2 жыл бұрын

Very nice work

@denttime 2 жыл бұрын

Thank you. Appreciate it.

@officialWWM Жыл бұрын

Amazing!

@mikep.9005 28 күн бұрын

Where can I buy the reaper tabs at. Great video thanks, never mind I watched your video again and you told where to buy supplies. 👍

@denttime 27 күн бұрын

Dentreaper.com thanks!

@northbaybassanglers1068 Жыл бұрын

My uncle from north Idaho (DENT HUNTER- Rob Weaver ) completed dent wizard training and is done with his no compete contract and is now chasing hail all the way from Colorado to Idaho. I followed behind him for a year watching every move he makes while he marine corps style explained everything. Finally at 30 years old I’m hooked and want to fully get into it. My only problem is there is no school near me. Closet one is over 3 hours away. With twin girls, wife, and bills a move just isn’t in the picture. What else could I do to get more advanced and become a “technician”? I’m in Northern California

@VanishingNomad Жыл бұрын

Go to the junk yard, buy a junk hood and start practicing.

@elmiewho29 Жыл бұрын

@@VanishingNomad exactly what he said. Practice makes perfect.

@Pap3rPlanesss Жыл бұрын

Also from Nor Cal, sucks how every class is more down south! Turning 30 in a couple month

@floorpizza8074 Жыл бұрын

I'm fairly certain that KECO does on site training.

@denttime 10 ай бұрын

Sign up for DentTrainer.com and when you’re fully committed get some personal PDR training. If you’re serious you’ll find a way to get good training even if it’s far. Otherwise you find an excuse. PDR is hard to lear but it’s worth it if you’re the type who is passionate about it.

@freeskier175 9 ай бұрын

Nice work

@denttime 9 ай бұрын

Thank you! Cheers!

@gabryelleresende3525 Жыл бұрын

Excelent!!!

@keithlanning7381 2 ай бұрын

thank you so much for shareing

@user-vt2pt5rn7t 12 күн бұрын

دسخوش استاد دسخوش به سخاوتت

@hokagitumuyuki2925 Жыл бұрын

I need that kind of pdr lump

@muhammadayaz7440 3 ай бұрын

Which spray did you use to remove the glue?

@01XBOSS Жыл бұрын

Thank you nice video

@denttime Жыл бұрын

Glad you liked it

@muhammettoker6059 2 ай бұрын

Perfect 😎

@RaymondCrepeau 13 күн бұрын

nice job

@denttime 13 күн бұрын

Thanks!

@ahmadghanem2414 2 жыл бұрын

Awesome

@user-zh3mu3zi3m Ай бұрын

Excellent work, where can I buy such a lamp? with stripes

@denttime Ай бұрын

Ansonpdr.com stuckeytools.com and UltradentTools.com

@vegitoblue7908 11 ай бұрын

Where can I get that reflection lights that shows the lines on the paint?

@SswearFrmBkSs 7 ай бұрын

Did you figure it out

@vegitoblue7908 7 ай бұрын

@@SswearFrmBkSs yes. Thanks

@lucianomatos1672 2 жыл бұрын

Good job🇪🇸🇧🇷🇺🇸🌎

@charlesbass4651 6 ай бұрын

do you recommend heating up the surface after the alcohol cleaning?

@denttime 5 ай бұрын

Absolutely

@fubartotale3389 8 ай бұрын

The light seems similar to an optical flat, what is it called please?

@valeriehagman4088 Ай бұрын

tried to glue pull some dents, pretty successful but not quite there, Tequila glue and reaper tabs small dents and pulled 6-8 times and still not all the way. Hood temp is 70 degrees, I am outside and can't get them all out, about 20. Looks way better but only about 80-90% good.

@GruntMuffin 12 күн бұрын

Ue are you using by chance?

@dailydrivenmedia_ 2 ай бұрын

How much would it normally cost for someone to do just one of those dents on a car door? Is there a specific glue you would use on a thinner paint car like a subaru WRX?

@christophemartin6340 2 жыл бұрын

Hello what is the model of your lamp thank tou

@denttime 2 жыл бұрын

Elimadenttools.com

@fabiolas4 Жыл бұрын

Scares me doing this because I once pulled the paint off the dent, so it went from a quarter size all the way up to a 3" disaster, no joke... I have a Challenger also and knock on wood I have no dents yet but the day I do, you know damn well I'll be pissed. I have the amazon puller and tabs of what your using.

@kodysmith7563 2 жыл бұрын

I need help desperately...I've tried and tried and I just can't get the tabs to stick.. I've done everything exactly the way your showed in video's but the first slight pull and it pops off

@kcjones2737 2 жыл бұрын

Same problem bro. Especially in warmer weather 🤷🏻‍♂️

@user-jn8dg7ee9u 10 ай бұрын

Greatttt

@razikguerrioune3222 Жыл бұрын

Good

@kcjones2737 2 жыл бұрын

Bro how is that glue setting up that fast?

@lucianomatos1672 2 жыл бұрын

Thanks🇪🇸🇪🇸🇪🇸

@sli8462 2 жыл бұрын

I pulled a dent out almost to perfection... Then I decided to pull once more and created a bubble... Smh. Any idea on how to fix this

@OnePointLander Ай бұрын

Can you use this same technique on aluminum?

@denttime Ай бұрын

Yes indeed.

@BetoCuritiba 6 ай бұрын

Perfeito!

@yocotobigeri 10 ай бұрын

Quindi il martelletto lo uso quando il bollo esce troppo, colpisco seguendo le linee fino a raddrizzarle? Il martello si usa solo per sporgenza quando ho tirato trnppo il bollo?

@ismaelfernandez9019 2 жыл бұрын

What chemical does the bottle have to remove the glue?

@denttime 2 жыл бұрын

91% alcohol

@JairSilva-zw7qq 2 жыл бұрын

OI MEU AMIGO TUDO BEM COM VOCÊ SOU DO BRASIL TO APRENDENDO MUITO COM VOCÊ VEJO TODOS SEUS VIDEOS ESSE VÍDEO QUE EU ESTAVA ESPERANDO COM VENTOSA FAZ MAIS VÍDEO COM VENTOSA PORQUE TO COMEÇANDO AGORA E NÃO TENHO TODAS AS FERRAMENTAS AINDA AQUI É CARAS AS FERRAMENTAS NÃO TENHO DINHEIRO PARA COMPRAR MAIS TO COMPRANDO AS POUCOS OK MUITO OBRIGADO DEUS ABENÇOE.

@jnvc7270 Жыл бұрын

Does tapping ever leave small marks on the paint?

@denttime Жыл бұрын

Yes but not permanent

@obsidiansuby Жыл бұрын

Ain’t Mike Toledo productions 😂😂😂😂😂😂

@diobasilico4972 Жыл бұрын

What mm was that tab?

@shanejones5885 2 жыл бұрын

Decent video I like how you went into some detail about the tabs but if you have any type of expensive car the owner will lose his mind if you stick your alcohol magnet on the paint. Just fyi. Coo video tho.

@denttime 2 жыл бұрын

Thanks but you should see when we have to tap down on the paint 😉

@user-oo7rf6vp2k Жыл бұрын

❤❤❤❤❤

@AntonioCarlos-uc1mk 2 жыл бұрын

muito top parabens

@LaHandleAbhi 10 ай бұрын

does glue scrape off the paint ?

@denttime 10 ай бұрын

No, but occasionally it can pull paint.

@canalcaribeno Жыл бұрын

Hi! in order to take the course, don't you need the tools first. Please let me know how much the tools cost so i can't buy it later on near future please, including the light system. Thanks in advance.

@denttime Жыл бұрын

Actually, you’ll want to watch the course first because that’s what it’s about initially is about purchasing tools and how to use them. The most common problem people do when they first try to learn PDR. Is they buy tools that they don’t know how to use or understand. On Denttrainer.com.you’ll see the foundation from step by step. Start with the main course called Ground Zero Pdr Training. You won’t regret it, and you’ll save lots of money, including tool discounts for the tools that I mentioned. Good luck. Thank you.

@RaymondCrepeau 13 күн бұрын

when tapping down are you on the line our in beteen

@denttime 13 күн бұрын

On the line. Thanks

@vehiclesprayerssociety 6 ай бұрын

❤💪❤️

@mojojoji5493 Жыл бұрын

Kinda messes with the clear coat but way better than a dent I gotta get my car done

@jcuadrado9518 2 ай бұрын

landscape recording please... but helpful vid regardless

@denttime 2 ай бұрын

I film only portrait mode now. Thanks

@kimkallestad3017 Жыл бұрын

Good work but i think it would save u some time if u didn’t pull that hard with the puller, i did the Same thing and i found quickly out that it made the process longer, what i did was massaging the rigger slowly until i saw it was far enough out to massage it back to its place

@kimkallestad3017 Жыл бұрын

Hope it is a good tip if u haven’t found it out yet ;-)

@savage6394 4 ай бұрын

So, in the second 1/2 of your suggestion you recommend doing exactly what you recommend not to doing in the first 1/2. Pull it “far enough OUT to massage it back to its place”.

@savage6394 4 ай бұрын

Which, funny enough, is exactly what is show in the video.

@quoteswaislamichannel Жыл бұрын

👍👍♥♥♥

@martinsinvestimentos6297 2 жыл бұрын

🇧🇷🇧🇷🇧🇷👍🏻👍🏻👏🏻👏🏻👏🏻

@narceliminator3382 Ай бұрын

Try that on an old car wouldn't work only on these thin skinned junk we have nowdays

@denttime Ай бұрын

Indeed PDR works on older cars. Watch my other PDR videos on the classics. 😉

@ShadowMachine99 Жыл бұрын

GO tell DING KING that fog lights are not better!! Its more complicated to read a high and low spot among a dozen different Highs and Lows, Than it is to read some lines being expanded or pinched!!! Then again.. Im probably autistic. Ive never done a test (nervous laugh)

@bjhachannel6747 9 ай бұрын

You talking too much bro

@denttime 9 ай бұрын

The biggest communication problem is we do not listen to understand; we listen to reply. 😉

@cfisher2447 9 ай бұрын

All this is teaching me is that you need expensive tools to do it well. There's zero skill involved here. Your results are only as good as how much you shell out for tools.

@denttime 9 ай бұрын

Yeah Eisenstein. You’re completely right. That must be one of the most ignorant comments I’ve read. I bet you don’t even know how to fix a sandwich.