Go-Ped TRQ homemade rides.This kart made it look like a Go-Ped TRQ. The front suspension is independent of the torsion type, and the depreciation occurs due to polyurethane rods inside two profile pipes, the rear one also damps according to the same principle. The engine is from the Ural Electron 2T chainsaw on which there is a carburetor from the Chinese 4T Activ 110cc moped, due to which the engine runs smoothly in all modes plus engine efficiency. The regular gearbox was removed from the chainsaw and another was machined without lowering the speed, but the weight and size of the engine decreased. The engine size is 109cc and the power is 5hp. The drive is organized on one wheel, and the brake (bicycle disc) on the other (there is no solid shaft). Wheel disks from a garden wheelbarrow 4 inches and motor rubber with a diameter of 300mm rear and 265mm front. Armchair from Opel. Handles from a bicycle.