Gold Plating Jewelry - Gold Plating Kit

Gold Plating Jewelry - Gold Plating Kit - "The JewelMaster Pro"

Рет қаралды 479,158

9 жыл бұрын

ORDER HERE: www.goldplating.com/collectio...
24K Gold Plating onto beautiful hand-made jewelry. One of the pendants is made of Brass, another of Sterling Silver, and one made of PMC (Precious Metal Clay) Silver. The entire process takes only about 10 minutes, and during this time about 20 micro-inches (.5 micron) of 24k gold is applied evenly to all the pieces at once. The JewelMaster was designed to plate up to about 12 square inches at once, so that multiple pieces can be plated at a time. To achieve thicker plating, you will need to plate for longer periods. The gold solution that comes with the kit has 2.5 grams of "fine gold", and will plate about 1,200 square inches to a typical gold plating thickness.
*Artwork being plated was designed by Patricia Gambit ~ An artist that designs and hand fabricates one-of-a-kind jewelry using Jewelers Brass, Sterling Silver and Fine Silver Clay.*
Visit www.goldplating.com/ to order.
For more information or questions please e-mail or call us:
801-546-6200
info@goldplating.com
---
Gold Plating Services is a 25 year old company that manufactures and designs electroplating equipment and solutions. Our mission is to make electroplating, specifically gold plating, as easy and efficient as possible. Piecing together your own kit requires quite a bit of knowledge about electroplating. The other benefit of Gold Plating Services products is the clean, all-inclusive quality of the equipment. No excessive wires, all self-contained and easy to get out and put away when it is needed. We pride ourselves on our quality of service, and products. Gold Plating Services offers the best gold plating solutions available. We want you to be successful, and our friendly staff has decades of electroplating experience.

Пікірлер: 341

@carolinaramirez1402 3 жыл бұрын

I got this kit about one month ago. I haven't tried it yet, but I can say just by looking at the instructions manual that if you are just starting this is the kit you want to get. Very clear explanation and is just plug and play. I will try it in a couple of weeks with some jewelry. 👍

@douglasabdullah8162 2 жыл бұрын

i guess it's quite randomly asking but does anybody know a good place to watch newly released movies online?

@adrienrandall9483 2 жыл бұрын

@Douglas Abdullah Flixportal =)

@douglasabdullah8162 2 жыл бұрын

@Adrien Randall thanks, I signed up and it seems like a nice service =) Appreciate it!

@adrienrandall9483 2 жыл бұрын

@Douglas Abdullah you are welcome =)

@allofatfunhouse5101 2 жыл бұрын

@@douglasabdullah8162 Xbox series x or any Xbox really

@illegallife11 2 жыл бұрын

Awesome I'm a watch repair/ services and I really like to start doing gold planting thanks for the video

@Peepsyx3 8 жыл бұрын

So cool! thanks for posting! :)

@123hot7 4 жыл бұрын

Can you purchase a whole kit with everything in it that you need? For the 24-karat gold

@Richievalenzz 3 жыл бұрын

Could you plate in different karats of gold? if so what do you need to change the karat plating in order to do that ? Thank you

@artistevivien Ай бұрын

This is fascinating. Thank you for sharing!

@petedetects7012 4 жыл бұрын

Can you take a 14k gold ring that lost its luster and plate it with a 18k solution. Will it stick. Thank you for your answer. Big Mex

@praveenkirsur 5 жыл бұрын

Is it real gold which is plated on the non gold items? If yes, how is the gold solution obtained? Steps if any?

@miamia7198 4 жыл бұрын

How do you dispose the water that you used for rinsing?

@srednaart 4 жыл бұрын

Great video!

@GoldPlatingServices 4 жыл бұрын

Glad you enjoyed it

@tatesmobilewashandinstalla7025 2 жыл бұрын

What happens if you keep it in the solution or keep plating it?

@sean.sullivan 6 жыл бұрын

Can you do this onto black stainless and can you put chrome on top instead of gold?

@aungaro6071 4 жыл бұрын

If u wanna know if ur KZfaq videos r working for profit I JUST BOUGHT THE MASTER KIT ON EBAY 😂😂 super excited for this

@MacherlaPrabhakar 3 жыл бұрын

thanks for posting,

@GoldPlatingServices 3 жыл бұрын

Thanks for watching!

@jeffersonfaudan 2 жыл бұрын

can you possibly do a video on how they do two/three tone electroplating? how is that done? for the factory produced material, i'm sure they have the proces... how about with two/three tone jewelry that you want to replate to new? how is that done? i don't see that here on youtube... if that's not possible, does that mean that if you have a piece that has tri-color and you want it replated, you will have not much of a choice but replate it all or have it polished despite the loss of gold to retain the shine

@beatrizsanchezcid5203 3 жыл бұрын

Amazing thanks for sharing! I'm making earrings and would like to gold plate them, would you advise this gold plating kit to be the most useful or are their any other cheaper but effective ways of gold plating my jewels? I'm new at this hehe!

@generalthings5075 2 жыл бұрын

Hi did you find anything that helped? Please help me to thanks

@kellynhicoleanne 2 жыл бұрын

@@generalthings5075 0ppp9p⁹p0p0

@alexj6408 4 жыл бұрын

If you keep plating longer will it build up to eg: 5 microns, or 10 microns? I am wondering as most watches were plated to 20 microns back in the day?

@GoldPlatingServices 4 жыл бұрын

24K Hard Gold can be plated to ~2.5 microns or 100 microinches. 24K Soft Gold can be plated indefinitely thick, but has a matte finish.

@candicemills4448 6 жыл бұрын

Your video was so helpful cause am in the market for a plating merchine... I have additional question can it plate stainless steel..

@GoldPlatingServices 6 жыл бұрын

Thanks! Here is a video showing how to plate onto stainless steel with this machine: kzfaq.info/get/bejne/d9V7htyH1qeao40.html

@irenetram 4 жыл бұрын

Is stainless steel a good base for gold plating?

@SelfmadeChannel 8 жыл бұрын

Question: Why is my gold-solution yellowish like your first solution, and your gold-solution is dirty purple solution?

@GoldPlatingServices 8 жыл бұрын

+Selfmade Typically solutions that are yellow or clear produce a "soft" gold finish. Purple solutions like ours are a "hardened" 24K gold. Hardened gold solutions, like the one shown in this video, produce a much more desirable finish for Jewelry (and other decorative items) as it is shinier and also more durable.

@SelfmadeChannel 8 жыл бұрын

+Gold Plating Services As a lab technician (polymers, no anorganics), it sounds a bit weird to me. Gold-kations are gold-kations...does the solution really matter? The solution itself makes a difference maybe, acid or lye....hard to understand. But I saw the purple solution in a huge tank, industrial grade and size...so I guess the yellow stuff is more for the hobbiest.

@SelfmadeChannel 8 жыл бұрын

+Gold Plating Services Funny, they use Co-compounds as a drying-additive for 1k clearcoats. Maybe the phyiscs behind it is the same :> what is the chemical name of the purple solution?

@lotlotdg4300 2 жыл бұрын

Can i plare my jwelry with out stripping the gold plating on it already and not removing diamonds or any stone on it?

@allofatfunhouse5101 2 жыл бұрын

Where does the gold actually come from do you have to buy it separately is it in powder form is it already In the black liquid

@douglasprewitt 5 жыл бұрын

@GoldPlatingServices I have Three questions for you...Does Gold Plating give off any type of smell? How do you dispose of the used chemicals and What type of zoning does a Jewelry Maker fall under? Appreciate your help.

@GoldPlatingServices 5 жыл бұрын

Gold plating does not give off much of an odor, if any. Most people do not smell it however some with a sensitive nose can. To dispose of the chemicals you would need to find a local waste disposal service. Many areas allow you to take it to the landfill, where they have a hazardous waste disposal area. If that's not an option, you will need to contact a private local waste disposal company and inquire about picking up liquid waste. Many people get large containers (20gallon, 50 gallon, etc.) and collect it for years and then pay a 1 time disposal fee (usually $100-$200 or so). Zoning will depend on your area, you would need to contact your local agencies to find that out.

@iamthatiam1111 4 жыл бұрын

Will this work on copper ?

@GodFirstTalkk 3 жыл бұрын

Can you dip gold pieces with stones ?

@pradeepdanthasinghe6336 4 жыл бұрын

What machine should indeed for gold plating are there any mesureing tools for 2.5 microns

@podamis314 2 жыл бұрын

Can multiple layers of gold plate be applied?

@a1phaaugmentations65 4 жыл бұрын

What would be a starting price to replate a gold plated nugget watch?

@melekdepaz3516 4 жыл бұрын

Can you gold plate my sterling silver ring. In 18k gold. How do i get in contact with you to send u my ring. Thank you.

@user-ik9hi3cl1r 4 жыл бұрын

good job

@antoniodalombajr9169 8 жыл бұрын

lets say I have pendants about the same size as the pendant that you plated that can hold the stone..about how many can I plate with the gold solution? And how much is a refill of the gold solution? Thanks..Excellent video too

@GoldPlatingServices 8 жыл бұрын

+Antonio DaLomba Jr Thank you Antonio, we're happy to hear that. Assuming the area of that pendant is about 2 square inches you could plate around 125 to 150 of them to a "jewelry grade thickness" of 20 micro-inches. Our "24K Bright Gold Solution" contains 2.8g fine-gold and costs $325.00 per bottle. If you used every milligram of gold in the solution you could plate about 400 square inches of area (200 of the pendants) to a 20 micro-inch thickness, however most people replace the solution when the gold content gets low as the deposition rate slows down quite a bit. The cost of the actual gold plating is quite minimal. The ability to gold plate items, the time involved, and the inherent value of turning something gold is what most people are charging for when they price a job or item. Let us know if you have any more questions or shoot us an e-mail if you would like to order.

@Rolanditou 7 ай бұрын

Im looking for a plating house to send silver merchandise periodically to rhodium plate, gold palte and also in rose gold, now my question is, this plating on silver it wears quick, or it actually persist in time? I need some industrial grade plating that doesnt wear off easy. DO you guys only sell equipment or also offer plating services?

@milicadjukich4416 2 жыл бұрын

Beautifully done. Is there someone that would do that and for how much?

@Igggggggggggg 6 жыл бұрын

Thanks so much, this helped me so much, Amazing Job, I love his Video, I subscribed and left a like, and I'll be watching all your Videos, thanks so much, have an amazing day, amazing job and video

@GoldPlatingServices 6 жыл бұрын

Thank you so much for watching, liking, and subscribing! We are very pleased to hear your kind feedback. You have an amazing day as well!

@Igggggggggggg 6 жыл бұрын

Gold Plating Services Of Course, No problem, You guys are Amazing, and thank you very much!

@alisonsenat1525 3 жыл бұрын

@@GoldPlatingServices can I contact you I need help with a watch or you can email me. Alisonsenate@outlook.com

@mw7845 3 жыл бұрын

That’s amazing. Can you plate jewelry that has stones in it already, like cz?

@memeshack9454 3 жыл бұрын

i think if you cover them then yes

@elgallodecente1472 5 жыл бұрын

Nice color, is bath of gold ??

@meggomyyeggo 5 жыл бұрын

Can I dip a locket in gold if I cover the part there is a picture. The picture in my locket is lasered into the locket

@kernowcoinringscornishcoin3999 7 жыл бұрын

Hi can I gold plate onto an alloy or do I need to flash plate the alloy first and if so with what metal Regards

@GoldPlatingServices 7 жыл бұрын

It would depend on what the alloy is. Stainless steel does require a "flash plate", for this we normally recommend Wood's Nickel Strike. Most copper alloys don't require any special activation but some applications do use a nickel under plate on copper, brass, or bronze. Our technical staff can advise on the requirements for various alloys.

@Koldworldblizz Жыл бұрын

Can this b used with Gold teeth molds & Will the plate hold regardless of water or smoke ? Thank u

@haniko1236 5 жыл бұрын

plz can we use stainless steel anode for jewelry rhodium plating ? Thanks a lot

@Fieri111 4 жыл бұрын

for planting use only platinum anode . the steel anode use for the electro cleaning .

@rb67mustang 3 жыл бұрын

9:08, I'm cutting coins to make medallions, some of the coins are old and tarnished. If I bought this kit, how, or what's the best way to remove tarnish from cupronickel coins?

@GoldPlatingServices 3 жыл бұрын

There are ways of chemically removing tarnishing, however we typically simply polish the item to the desired luster, which removes tarnishing.

@silverwiskers7371 4 жыл бұрын

Is it possible to recover the gold and if so how much is it worth

@mazinalhoseny 2 жыл бұрын

Good day I have a problem with the gold plating when I look, it looks good, but it removes quickly when touched or used within two or three days. What is the problem and what is the solution please .. For information, I paint for 30-40 seconds and do not use the activator. What is the activator used in the explanation?

@generalthings5075 2 жыл бұрын

Did you find the answer? Please help.me wher i can get answers from too

@pavy415 9 жыл бұрын

so you take in jewelry that people want you to plate as well how much do you charge for it? I mean to plate it the thickest possible how much would it be?

@GoldPlatingServices 8 жыл бұрын

It purely depends upon the piece of jewelry. The condition, size and type of item makes a huge difference in how long it takes to plate. Most of the cost comes from your time, not the actual gold content used. For instance, you could plate a ring with a super thick layer and the gold cost may only be a dollar or two. A chain necklace in not-so-great condition may take you a couple of hours to polish, prepare and plate. To give you an idea though, we typically charge about $200-$300 to plate a watch and we also have a $150 minimum plating charge no matter what the item is.

@user-zk6vc8ud4y 6 жыл бұрын

What steps should be taken for the piece before the plating process? I use a steam machine, an ultrasonic cleaner and a cleaning material before plating. Is there anything else that improves the quality of plating.

@GoldPlatingServices 6 жыл бұрын

As long as the part is free of debris - polishing compound, dirt, dust, etc., that is all that matters. Improving the "quality" of the finish is mostly done in the prep (polishing). You want to get the item to the finish you desire BEFORE plating it, not after.

@mhmedattia4129 4 жыл бұрын

what is the name of purple solution which is added to the complex to appear in this shape?

@freyja130 5 жыл бұрын

How long would you leave it in solution to get vermeil thickness plating?

@GoldPlatingServices 5 жыл бұрын

About 15 minutes

@daphneprice7817 2 жыл бұрын

Can you do this on a ring with Swarovski Crystal stone in it?

@dinamiteurdinamiteur2324 2 жыл бұрын

How much gold a half a micron joaillery quality plating is using? A gram for all these things? 1/10 of a gram?

@DallasCityGurl 5 жыл бұрын

So do gemstones have to be removed in rings before plating?

@GoldPlatingServices 5 жыл бұрын

No. Very few gemstones are affected by plating solutions. Turqoise can be but usually is not affected by Electroclean, Activator and Gold. Diamonds or other glass-type gemstones, including cubic zerconium are not affected whatsoever.

@AT-gu8by 2 жыл бұрын

Say I had a sterling silver ring and I only wanted the collets plated, is that possible And how would you do that.

@busted208 4 жыл бұрын

how long does the gold plating last before it wears off from the actual metal?

@GoldPlatingServices 4 жыл бұрын

This completely depends on 2 main factors; 1) how thick the gold is plated. 2) How it is handled. If you plate the item with a very thick plate, say "Vermeil" (Pronounced Ver-May and is 2.5 microns thickness), it could last a lifetime. If its earrings it will be handled less than a ring, etc. Typically gold plating gets a bad reputation because many jewelers apply the gold way too thin. When we plate an item, we put on atleast 1 micron or more and it lasts many years in most cases.

@k.hendrickson8735 Жыл бұрын

@@GoldPlatingServices It also depends on the person’s chemistry on their skin! We have a pH level. I have had Bad Luck with plated jewelry. Some wore off in weeks!🙁 (obviously poorly done) But I also grew to realize that all the vitamins I take, especially Vit. C, have an effect on plated items (but hey, mosquitoes don’t bite me and no colds or Covid, soo 🤷🏻‍♀️!) I own 1 vintage, 50’s era, watch that has kept its plate well. There’s no school like old school!✌🏼

@ronaldjoseph4425 5 жыл бұрын

How do you get a medium light color gold similar to 14K jewelry not that heavy dark yellow color that a lot of people associate with plated gold?

@GoldPlatingServices 5 жыл бұрын

We sell a 14K gold plating solution! We also sell an 18k. We have a chemical you can add that will lower it even more if you feel it is still too gold.

@kathyalanfourd8225 3 жыл бұрын

Do you recommend any product that seals the plated gold in ?

@juliaema1308 3 жыл бұрын

Great question! I hope we will get an answer! Also to be honest I do nails so I tried sealing with a clear hybrid base coat and/or top coat. It changes the feel of course, becauce hard gel doesn't feel like metal but it works GREAT as a sealer!! It's also safe for the skin after you cure it, it' super clear and shiny AND it can fill in and hide some scratches etc. You just got to be careful to keep it thunk so that you don't lose sharp edges and a clean look ❤

@isobelhedley86 8 жыл бұрын

Hi, can you tell me if you can plate fine chain link necklaces with this kit? Thanks

@GoldPlatingServices 7 жыл бұрын

You can plate fine chain link necklaces, however they need to be pulled as tight as possible in order to allow the electricity to flow from link to link. The current has to be able to flow throughout the entire item.

@rickfromjersey 3 жыл бұрын

Can a men's Titanium ring be gold plated? and what would the cost be?

@azumma225 4 жыл бұрын

hi! Do you do plating service for jeweler who needs their jewelry be plated?

@GoldPlatingServices 4 жыл бұрын

We can. Fill out this form and we will get you a price. www.goldplating.com/pages/quote-request

@dinamiteurdinamiteur2324 2 жыл бұрын

And can You goldplate anything? Other than metal? A Leaf for exemple

@tex_mex-car-tel 3 жыл бұрын

Would like to purchase a starter kit to get started of course. Can you recommend the very first one I should get. I eventually want to get to playing guns

@GoldPlatingServices 3 жыл бұрын

The JewelMaster Pro (shown in the video) is capable of plating onto most metals. For steel/stainless steel you need a "Strike" instead of Activator. You can use either Woods Nickel Strike or TriVal - Acid Gold Strike. The JewelMaster is a great starter kit. Many who get too busy to keep up with their needs with the JewelMaster will eventually upgrade to our new ProLab plating kit, which has 4 or 5 Liter capabilities.

@euvid1 5 жыл бұрын

thanks. WHat kind of Anode did you use?

@GoldPlatingServices 5 жыл бұрын

We used a Stainless Steel Anode in these solutions.

@lisacrowderjewelry4058 7 жыл бұрын

what type of ventilation is suggested for this unit?

@GoldPlatingServices 7 жыл бұрын

"Local Ventilation" is typical and sufficient. An open window and/or area fan works fine for most people.

@amberantcliffe5443 5 жыл бұрын

Can you do this process with diamonds or gemstones, maybe even CZ still intact in the pieces?

@GoldPlatingServices 5 жыл бұрын

Sure can! They are unaffected.

@k.hendrickson8735 Жыл бұрын

@@GoldPlatingServices You cover the precious stones with wax or something before the dips, right?

@tylerd6110 3 жыл бұрын

can we gold plate tin alloy jewelry?

@Missrichard-mh2hi 5 жыл бұрын

hi this is hashim .can u tell me formula of 24 krit gold plating

@lisasolis7027 2 жыл бұрын

hello, thank you for the video. can i send you a belt buckle that has become dull and compensate you for the service of electro plating it ? i would greatly appreciate your service.

@aprilwhite284 8 жыл бұрын

Oh and how long does it stay electroplated

@kyststudio-epicartadventure 4 жыл бұрын

April White , it is permanent but thin. It will wear off the high spots eventually. Plating wears off sooner, the thinner it is.

@alluringbliss4165 5 жыл бұрын

Are these solutions still good after using them once? Also, how long does the plating last?

@GoldPlatingServices 5 жыл бұрын

They are good for hundreds if not thousands of uses. The thicker the plating, the longer it lasts. Can last a lifetime if plated thick enough or wear off in a week if plated too thin.

@glow1815 2 жыл бұрын

@@GoldPlatingServices lol mine wears off in a week lol. Got it from a cheap seller for 18$

@yummyoasis 5 жыл бұрын

Do you to do 14 carat gold for customers. I have few jewelry that I like the designs and would like to have them gold plated. Also what are your cost?

@GoldPlatingServices 5 жыл бұрын

We do have 14K Gold that we sell with our kits. However, we do not offer 14K plating services.

@bettybho2168 5 жыл бұрын

Hi, I have concerns that although this looks to be an excellent home gold plating kit it may only flash plate. I need to be sure this will plate 3 microns without any problems, what do you think?

@GoldPlatingServices 5 жыл бұрын

This kit can plate to virtually any thickness. Flash plating is 0-7 microinches or less. This hard gold shown in the video is capable of plating up to 120 microinches (3 microns) in one contiguous layer, however that is the absolute maximum. Typically, to go this thick, it would be done in 2 separate "layers". This means you would plate it once for 1.5 microns, then again for another 1.5 microns. The kit is not the limiting factor in thickness, the solution is. Hardened gold solutions are more limited in thickness, in one layer. However, with a Pure Gold, you can plate virtually to any thickness. The reason people dont use a Pure Gold for jewelry is it is not hardened and has no brighteners. If you do wish to achieve 3 microns, keep in mind you will need to track your gold use and maintain your bath. 3 microns is VERY thick for a hard gold and most do not plate that thick. We can help you with gold usage and how to replenish the bath.

@bettybho2168 5 жыл бұрын

Hi Thanks for your reply. Would there be more chance peeling given the hard gold solution needs two plates to achieve 3 microns thickness? What if I used the pure gold solution first and then the hard gold to obtain a durable finish on my jewellery? Do you supply full detailed notes re pros and cons and after sales support with this kit?

@GoldPlatingServices 5 жыл бұрын

Betty, rather you did it in 2 layers or 1 contiguous layer there would be no difference in adhesion. You would have zero chance of "peeling" if the initial layer is applied correctly. You could do your idea with the pure gold capped with hard gold, however I believe this is not as good of an idea as plating with hard-gold throughout. We supply a comprehensive users guide, these videos, and all the after sales support you need. You can e-mail or call any time with questions and we have experienced tech's ready to help.

@bettybho2168 5 жыл бұрын

My jewellery line is mainly sterling silver, I don't want any migration into the gold plate. Is an undercoat of white bronze advisable and do you supply the bronze plating solution?

@k.hendrickson8735 Жыл бұрын

@@bettybho2168 >> What about rhodium plated ?

@hayden722 4 жыл бұрын

Hello, can I gold plate a copper ring with a stone (emerald) in it ? should I cover the stone ?

@lancepugh4138 4 жыл бұрын

Yes, you can gold plate copper. Not sure about covering the stone. You mean to protect it right?, not trying to plate it??? Haha. I have a nice tensor ring I bought that is plated copper. Even the copper beads on it are plated. Pretty cool stuff. I would love to make a nice big bracelet of copper and plate it.

@quintanilhajose115 6 жыл бұрын

Perfeito gostei

@trungucnguyen8901 3 жыл бұрын

What kind of glove have you use?

@jonivaceyhutchison7554 8 жыл бұрын

I am impressed. I want one.

@GoldPlatingServices 7 жыл бұрын

Thank you!

@smileylovely3840 5 жыл бұрын

I to want one

@troubleman3536 4 жыл бұрын

Joni Vacey Hutchison do it turn color

@dipupaik9973 Жыл бұрын

দারুণ যুক্তিসঙ্গত কথা...😀

@benoutv5338 5 жыл бұрын

Sir you could know the materials used in the process

@norakavanagh4 6 жыл бұрын

How much jewelry can you usually plate with one bottle of the solution? Love the video, very informative!

@GoldPlatingServices 6 жыл бұрын

One quart contains sufficient gold to cover ~ 800 square inches of area to a decorative thickness.

@angelrivera4121 6 жыл бұрын

Where are you located I would like to know if you can fix my gold plated chain

@GoldPlatingServices 6 жыл бұрын

We are located in Utah. You would need to send it in to our shipping/receiving location. Send us an e-mail at Info@goldplating.com and we will take care of you.

@picklenoob2346 3 жыл бұрын

sorry for the dumb question but if my jewelry has a rhinestone on it, will the gold be plated on the rhinestone too?

@juliaema1308 3 жыл бұрын

Check comment above! The answer (yes) is there

@camillesammy8837 2 жыл бұрын

Hi, no it doesn't. The gold attaches only to the metal.

@gargisingh4897 4 жыл бұрын

Cooper ,platinum or gold mix jawelary kkha milti h

@2cdpmd 5 жыл бұрын

For immersion 24 K gold plating, what metal do you use for the anode?

@GoldPlatingServices 5 жыл бұрын

For our solution, a stainless steel anode is acceptable.

@f2mel2 4 жыл бұрын

Jewelry grade? Half a micron? How does that compare to gold filled?

@shikherrastogi5163 5 жыл бұрын

is this gold plating also possible with wax pieces?

@GoldPlatingServices 5 жыл бұрын

In order for electroplating to work, you must have a conductive surface. We aren't aware of any wax pieces with conductive surfaces, but wouldn't go as far to say it doesn't exist.

@Emmaolse 5 жыл бұрын

Hi, How can I gold plate my jewelrys?? What do i need to buy? Please answer

@GoldPlatingServices 5 жыл бұрын

This kit is exactly what we would recommend: www.goldplating.com/products/jewel-master-pro-hd-plating-kit-for-plating-gold

@bs4762 7 жыл бұрын

If I don't want to buy the kit where can I have this done, and what are the prices per piece?

@GoldPlatingServices 7 жыл бұрын

We also offer electroplating services, here at Gold Plating Services. We have a $150.00 minimum plating charge, but typically 1 or 2 jewelry items will fall into that depending on what they are. Send us an e-mail at info@goldplating.com with a picture and description and we will get you a quote ASAP. You can also give us a call a 801-546-6200, but typically its best for us to see it first and shape, size, type and condition greatly affect pricing with Gold plating. Thanks!

@jagdishkarmokar8540 2 ай бұрын

Vare Nice

@GoldPlatingServices Ай бұрын

Yes, indeed very nice.

@BlissfulBirdStudio 8 жыл бұрын

Can you do this same process with plating silver? TY

@GoldPlatingServices 8 жыл бұрын

Yes, you can plate onto silver with gold plating solution and with silver plating solution onto the same type of items you can gold plate. The process is the same to achieve a silver plate and it is to achieve a gold plate, each solution just requires a slightly different voltage setting which is indicated on the bottles and instructions included with purchase. Please let us know if you have any other questions.

@BlissfulBirdStudio 8 жыл бұрын

+Gold Plating Services What solution would I need for silver plating? Do you have a direct link?

@GoldPlatingServices 8 жыл бұрын

We have a silver solution called "Heavy Silver Plating Solution". It is available, however, it is not on our website, unfortunately. If you would like to order, please send us an e-mail at info@goldplating.com or give us a call at 801-546-6200 and we will make sure you get everything that you need! -Robert @ GPS

@cloud5113 5 жыл бұрын

Do you provide re coating service? Or do you know anyone that is reputable?

@quintanilhajose115 3 жыл бұрын

Até quanto kilo faz este processo

@MsChrisaable 5 жыл бұрын

Can you use a silver plating solution with this?

@GoldPlatingServices 5 жыл бұрын

Absolutley can!

@moxeymanace7590 5 жыл бұрын

Where can i replated my coin ?

@trackpackgt877 5 жыл бұрын

Ok serious question can you gold plate 14 karat gold? I ask because 24-karat it's prettier than 14k so could you 24 karat gold plate 14 karat gold?

@roadrunnarick4118 5 жыл бұрын

Hardesty Hardesty prolly I got gold grillz there 18k dipped in 24k

@koolcarintl 7 жыл бұрын

after plating how many years we can give guarantee for customers?

@GoldPlatingServices 7 жыл бұрын

How long the piece will stay gold plated depends on how thick you plate the gold and how it is taken care of. If the item is plated with 1-2 microns (achieved in 5-10 minutes) it could last a lifetime if taken care of properly. If it is plated for only 15-30 seconds it could wear off in a week.

@leekthedon6169 2 жыл бұрын

How to take off gold plating on real 925 silver?? Thanks

@mamerihan5954 2 жыл бұрын

Is it available in dubai

@jellytanyapon3225 7 жыл бұрын

If a sterling silver necklace plated with gold will it tarnished if you shower with it and exercise with it ??

@GoldPlatingServices 7 жыл бұрын

Gold plating is porous. So if the gold is not applied thick enough, the silver can corrode underneath the gold. The way this is dealt with is to either apply the gold quite thick or to apply a "diffusion barrier" between the substrate and the gold - this is typically done with something like nickel or rhodium. If you have done one of these two things, the silver should not corrode and the gold certainly will not.

@leverachi7879 6 жыл бұрын

does the gold wear off eventually?

@GoldPlatingServices 6 жыл бұрын

Eventually yes, any plating has the potential to wear off no matter what metal it is or how thick it is plated. However, the thicker you plate it the more wear it will withstand. Also, this is a hardened 24K gold which makes it multiple times more wear-resistant than a "soft" gold. It is still a 99.97%+ gold deposit, the hardeners just disrupt the lattice formation of the gold ions as they deposit. This disruption strengthens the structure of the formation - kind of like building a brick wall instead of trying to build a wall with varying shaped boulders. When a hard gold is applied to a reasonable thickness it should last many years, especially if taken care of.

@brandonadams32212 4 жыл бұрын

@@GoldPlatingServices how much would you charge to plate some items for me ?

@rubyandrews1337 4 жыл бұрын

How much do you charge for a very dainty necklace..I want it 24 k gold plated..

@GoldPlatingServices 4 жыл бұрын

Fill out our Quote Request and we will let you know! www.goldplating.com/pages/quote-request

@vinodkumar-hz6od 6 жыл бұрын

How much quantity to polish the jewellery in the solutions or chemicals ...in future the chemicals are finish where is the location how to purchase the solution

@GoldPlatingServices 6 жыл бұрын

We do not sell polishing supplies, polishing is a different craft than electroplating. You can purchase additional chemicals from our website www.goldplating.com . We can ship anywhere in the world.

@redcartiers 3 жыл бұрын

But where is the gold coming from? I’m not understanding if it’s real gold or not

@vinodkumar-hz6od 6 жыл бұрын

Is there any distributor in UAE?..how much quantity in one kit solutions or chemicals ...

@GoldPlatingServices 6 жыл бұрын

We have already answered this question seven times in other various comments from you. We're happy to answer any questions or clarify answers but repeating the same question over and over will only get you the same answer. All of our products ship from the USA, we do NOT have distributors anywhere else in the world. However, we can ship our products anywhere in the world except North Korea and Iran (because we cannot legally). We have provided you the links in comments & video descriptions for where you can see a detailed list of what comes with each kit & the prices.

@JMan377 8 жыл бұрын

What is the max micro-inches that it will do?

@GoldPlatingServices 8 жыл бұрын

+Joe Daddy You can plate to virtually any thickness if properly done in layers. However, the thickest you can feasibly plate with a hardened gold in one layer is approximately 80 micro-inches. After ~80 micro-inches the finish will start to appear "hazy", and begins to lose its luster.