Thats what i thought, the spin on the gelblock made the round go out the entry hole.

Precisely

I see it turn but the round doesn't come from the entry wound. Put your mouse on the entry wound and follow it. the round comes out above the entry hole it can be seen if you pause it. To me it appears to come out of the right side of the gel. after turning like you mention it looks to be coming out the back.

Yep, that's what I saw, it was spat out of its same entry hole.

Almost definitely, seems like it's bouncing around in the little entry wound, hits what was the left wall of the little pocket, and shoots out.

Kentucky Ballistics Sorry I made your dog worry Scott. 😉. 🇺🇸😎

Scott you watch this channel

i have explosive diarrhoea 😢

I missed it the first time and had to go back that’s a good one 😂😂

I couldn't stop laughing for an hour afterwards, so perfect 🤣🤣🤣

Danny is my spirit animal.

I was about to comment about that myself, ha

Ditto, LOL! Well played Danny, well played.

Ikr the chemistry is spot on!

Ya, I heard it too, freaking funny shit !!!

I prefer Danny personally. But i hate negativity and do not like the dumb comments. So let it be known that i respect you guys lots and if i could i would Personally fund these videos. Infact my 9 month old daughter loves watching them with me, she points out point of impact and really likes the clay block. So keep it up Jeff Danny and Gregg

Aidan Straw I love both Danny and Greg... and Jeff of course! I think this channel has a real good thing going with you three. Danny is sneaky funny though lol

@@outragequitter5027 yes for sure. One thing i love about UNtube is that the channel creators actually observe and can comment on their viewers posts. I get some feedback from some great tubers, Tao of course, forgotten weapons, survival russia, active self protection to mention a few. I really enjoy what is left of youtube, it is something to protect.

yep, I think the old hat was Danny's "be nice magic hat" . The lid is off now.

Yeah, that one cracked me up too.. took a little while to stop laughing and caughing (not covid). Also prefer Danny. After watching OG's once a cop, always a cop and why you should preferably open all your windows if stopped so the officer can feel safe (snoop around)... it was kind of a let down.

Dave Nevrla I had the same idea. You said it better than I would have...

That's what I saw.

Indeed. It went in and came back out of the same hole. As you described better than me. Quite the strange bloody thing though, was it not. LOL. Always makes my bollock shrivel, watching how much that gel twitches and contorts under the force. Pretty sure I wouldn't like my gut's dancing around like that.

I totally agree. If you don't look at the rotation, it looks as if it exits on the back. But it doesn't.

Yarp.

Ja Z I knew I was not the only one that heard that!

Fxlmao that was great!

I laughed my butt off when I heard that!

9:30i smell a new jfk magic bullet conspiracy haha?

Exactly what I was going to say - I'm too slow 🐢

Yeah lol :)

Around 3:30 in video... LoL 😆😎

I wonder what he was suggesting?😆

Tossed Salad Oh Damn!!! Sorry about that. I hate to see good whiskey wasted. ☹️. 🇺🇸😎

😂😂😂😂😂😂

But your sinuses have never been cleaner!

Try shooting the whiskey out of a shotgun.

Try shooting that whiskey out of something else.

Next we'll show if a golfer can drive a ball further than a shotgun slug.

Jafromobile Nice turbo. What's the psi rating

you'll have to ask one of those long driver dudes

Dang it Jafro, you got me addicted to polishing aluminium heads. You warned me though.

Would that be a wooden, iron or titanium club, though? Have you fired titanium slugs yet, Taoflolks? It's only 4.5 g/cc, less than half the density of lead, so you'd want your slugs to be twice as long as a lead slug, and you'd probably want some soft plastic between that thing and your rifling. Maybe make it a little longer and a little slimmer and jacket it with some of the old 17mm plastic pipe we used to use for plumbing here in the UK. Yes, we've got 12-gauge sabot by the mile in some old housing developments here.

Statler and Waldorf

HAHA

Danny and Greg are the two o!d guys from the Muppets or Grumpy old men

Wakawakawaka!

If only it was that easy to just "go somewhere else" to watch the videos. Unfortunately, yt has the biggest audience and viewer reach for videos, unless they want to start uploading to pornhub or something.

Great pornhub it is!!! InRange is already there!

advertisers won't advertise elsewhere, and video platforms cost way too much to maintain.

I recommend Taofedermaus start uploading to BitChute as well, they seem to be one of the better and fast-growing alternatives to KZfaq so far

Dont be stupid money follow viewers we are the power not You tube but when we act like this they get away with anything they want .

lol

thanks Robert!

?? Pray for Europe??

@@jakedunning9995 Article 13

yeah : -( maximum permitted magazine capacity 10 rounds etc

Well, Scotland voted to REMAIN in the EU and even threatened to get off the Union so they could remain with their belgian bureaucratic overlords. I'm not really sure about your statement that your felow scotts won't go quietly. If you're really worried about Article 13, kick Theresa May off office and put Farage to lead the brexit deal. Best wishes.

It is still months out from actually being a thing

Thank you!!

@@taofledermaus The demonetization is because of some sensitive Sally getting their panties in a bunch over Officer Gregg using those oh so derogatory terms like "Chinese satellite dish". People these days have no sense of humor. It's a shame.

I second that...

Stan Smith I second your second.

I fourth it. Anyone for canasta?

Anyone can see this and I would bet my life they knew this. They were just manipulating us to drive the comment section. Do you really think they missed this or at least consider this? The first thing they thought when the projectile was not in the jelly before watching the footage was "I bet it bounced back out" They failed to guess this on camera too. Imagine that, content creators on youtube lying to there viewers. I hate when people manipulate people like this.

Justin Thomas god that woulda been great to get in frame. Bummer

Yep!

I just looked at this again. I may be mistaken... :O There's 4 screws that hold the casing together. Now I only see 3. I can't tell if that's the steel pin or if it stripped the screw out of the opposite side corner, ejected from the shock of the impact? Incredible camera work as always, BTW...

@@taofledermaus cool video guys keep up fantastic content but be great to see you guys test cold steel produce their produce is tough 💪🐺🐾👌

JAFRO IN THE HOUSE!!😃 Love your work man! 😁

Then Line-x coat it, because everybody on KZfaq is telling everybody with a firearms channel to try Line-X this year and I may as well join in.

thanks Josh!

haha!

To make something commercially it needs to be reliable. A similiar design with a properly secured steel pin should be makeshift AP

Thanks, you should check out my channel kzfaq.info/love/1-FAXWWFY7WYBRmhu1HNEg

How about a brass or copper rivet with a pistol cap behind the rivet and a tack behind the pistol cap to detonat the cap upon impact.

For better performance one can use tungsten (but not tungsten carbide - it's too brittle), I guess. It has greater density and hardness than steel. And it can be bought quite easily as tungsten TIG electrodes.

Damn! Someone made the same comment I did before me!

They were straight up lying to drive the comments section. They couldn't have missed it. It's manipulative and when there's money being asked for to support them how wrong is that?

I've seen a video on home-made body armour using 2" square bathroom tiles and something like those ghastly woven-plastic-fibre-ribbon sacks I get free with every 3kg of live mealworms ... plus a huge amount of epoxy resin. Man made a two-part wooden mould to give the right curvature, put a layer of film over it, laid the fibre sheet on, covered it in glue, laid another on that, covered it in glue and so on for a while, glued down one layer of tiles, glued down the next layer with an offset so they covered the gaps in the first layer, glued a load more layers of sheeting over them and pressed the top part of the mould down. Stopped a scattering of 9mm. Didn't stop 7.62x39mm. I'd be very interested in seeing how well 2, 3 and 4 layers of tiles would stand up to various calibres, but given that ceramic vests are wrecked by an impact you'd need to make a lot of vests or a very big sheet of the stuff so you were shooting a fresh part with each calibre. I also wonder whether duck tape horizontally, vertically and both ways diagonally over each layer of tiles would make it tougher than having tile-on-tile contact.

@@Sableagle I'm in the making of my own body armor. It's taking a while as the materials are expensive and I'm also taking my time to make sure it's as good as it can be. It will be made off kevlar and carbon fibre composite, titanium, ceramic and rubber. Not necessarily in that order but those are the materials I'm working with. I live in the UK so I can't test it myself, therefore I was thinking to send it off to taofladermous for a test :)

Sure, you can test it here ... against a 12 ft-lbf .177 pellet. :/

IG Joe yes it definitely wobbled out the front.

Thank you !