Goodman Central Air Condensing Unit Compressor Replacement ZP39K5EPFV830

No video

Goodman Central Air Condensing Unit Compressor Replacement ZP39K5EPFV830

Рет қаралды 47,645

Күн бұрын

Buy part ZP39K5EPFV830 now: www.repairclin...
This video provides step-by-step repair instructions for replacing the compressor on a Goodman central air condensing unit. The most common reason for replacing this part is if the unit does not cool or is not running at all.
Additional air conditioner repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
All of the information for this replacement video is applicable to the following brands: Goodman
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!

Пікірлер: 52

@andrewsimon5437 2 жыл бұрын

repair clinic is known to be helpful for the common DIY'er, but the vast majority of people do not own specialized HVAC refrigerant recovery equipment.

@Samlol23_drrich Жыл бұрын

I’m planning to stand on the scale in my bathroom holding the empty recovery tank, and then stand on it again after recovering the 410a to see how much I recovered.

@bFRYE91 Жыл бұрын

I bought alot of these tools even tho I'm a DiY'r , and having done so, the dual system setup at my house has been immortalized... and frequently help out fam & friends nearby. For science!

@hillaryknox Жыл бұрын

@@Samlol23_drrichwait…so you already have everything BUT the scale???

@Gospodin.459 Жыл бұрын

What did he spray on the compressor?

@anonymous..- 3 ай бұрын

I find the atmosphere recovers really well!

@MrMultitool 2 жыл бұрын

Excellent! You did a Great job.

@Aybowl77 22 күн бұрын

This helped a lot

@repairclinic Күн бұрын

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@MulattoGato 10 ай бұрын

What’s the point of pulling a vacuum if u break the vacuum with air and not refrigerant ?

@thlightest9827 2 ай бұрын

The vacuum was never broken by air since he had re-installed the valve core in a fully sealed system.

@rmalanis13 Ай бұрын

Agreed. Need to add some gas to break vacuum. Then install ports to keep the non condensables from getting in

@thlightest9827 Ай бұрын

@@rmalanis13 No, the valve cores were removed in the first place to evacuate the system. Then after the vacuum pull they were reinstalled since they are needed for normal operation. They were installed with a vacuum still in the system no gas. Then after when you fill it with gas the vacuum rushes the freon inside the system since it wants pull it in versus the pressure of the tank pushing it in.

@user-dy9tq5gx2s 22 күн бұрын

To remove as much moisture as possible from the system. You close off your manifold to prevent any more air into the system after a vacuum

@jorgesosa4545 6 күн бұрын

What’s the best was to reintroduce the refrigerant? I was told to add charge first and then add the schraders. I’m not sure if it really makes a difference.

@DanielLopez-ln4qx 3 ай бұрын

Great video

@repairclinic 3 ай бұрын

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@hectormedina9009 Жыл бұрын

Remove caps of course when changing compressor, install valves of course

@NeW758 10 ай бұрын

Wow that was so cool !!

@willytangkere5784 8 ай бұрын

I installed Goodman many times my last install i have problems with pressure switch it took 3 times to replace pressure switch

@hectormedina9009 Жыл бұрын

Recovery tank (red) of course

@TheFoxygrandpa69 Жыл бұрын

You'll have to disconnect the power wires and the whip

@bradw.5991 2 жыл бұрын

So, what was the purpose of introducing Nitrogen into the low side service port while brazing in the Compressor? Did you actually think the nitrogen would actually flow backwards through the Compressor or be able to overcome the resistance of the valves in the Compressor? That step was worthless and a waste of nitrogen as it would flow in the low side port, thru the evaporator and out the high side port.

@Holydany Жыл бұрын

If it came out at the other end , why not ? Do you know why why we use nitroglycérine while brazing at first ?

@joesprauve2408 11 ай бұрын

@notchygdixon6546 Ай бұрын

@@Holydanyno sute

@hectormedina9009 Жыл бұрын

Refridgerator recovery machine of course

@dekonfrost7 Жыл бұрын

Never ever ever use emory to clean a joint after the pipe is open in hvac. EVER.

@SyriusXR7 11 ай бұрын

Exactly, you clean it...before cutting it...

@LazaroSanchez-zb8rk 3 ай бұрын

A look for jab ayudante técnico no tengo esperensia en el

@joshyaash Жыл бұрын

Replaced a compressor today. Unsure what is wrong. Old compressor was grounded - continuous with the chassis. New compressor is fine, but the breaker keeps tripping when the compressor attempts to kick on. Tried replacing the capacitor, the breaker, and the pigtails. New compressor has same rating as old. Should I try a hard start? My manager will have my nuts if I have to buy another.

@mattpacktree92 Жыл бұрын

you have an operating voltage(208,220,240) issue. check for bad wiring

@joshyaash Жыл бұрын

Turns out it was an install error. My tech didn't blow out the lines with nitrogen. We blew out about 4 big pieces of shrapnel from the suction line. New comp must have sucked one in and died.@@mattpacktree92

@mattpacktree92 Жыл бұрын

@@joshyaash daaaaamn

@mattpacktree92 Жыл бұрын

@@joshyaash what were the pieces from, cutting the old lines?

@joshyaash Жыл бұрын

not really sure. They were a little curved, like maybe they were part of the scroll from the inside of the compressor@@mattpacktree92