GoPro Karma - making a board to boot from micro SD card

Рет қаралды 1,817

6 ай бұрын

This is a quick video on how to make a board that can be used to boot from a micro SD card as part of the Pairing issue fix.
This is the video on how to prep the SD card
• DiskImager software In...
The parts listed below were used in this video. You can order them from the same site or use their specification to source the parts locally.
14 pin ribbon cable board with a 0.5 mm pitch
(ensure 14 pin is selected)
www.aliexpress.com/item/10050...
micro sd on board
core-electronics.com.au/adafr...
14 pin ribbon cable
(ensure 14 pin is selected and go for the shorter length as I have seen issues with longer ones)
www.aliexpress.com/item/10050...
I have also included the invite for Discord which can be used to ask question and obtain other information.
/ discord
Here is a list of people who can help in different countries
/ 1413795696209319

Пікірлер: 16

@loopdisruptors 6 ай бұрын

Great work Ben, thanks so much

@playmobil65 6 ай бұрын

Thank you so much ! I will try to fix my karma as long as I understand all the steps and equipment needed

@playmobil65 5 ай бұрын

@bozmanx when I follow the link for the 14 ribbon cable, there are 2 types: reverse direction or forward direction. Wich one should I buy? thanks again for your precious help

@bozmanx 5 ай бұрын

forward

@playmobil65 5 ай бұрын

@@bozmanx thank you. That is what I ordered.

@UncleJRock 6 ай бұрын

Thanks for the helpful video! I'm trying to connect with you on facebook as well so I can see the list in your FB group

@ydsmymusic 5 ай бұрын

Great video! Thanks for sharing ! I have no experience in electronic nor welding. What is the liquid and white stick you are using at 04:39 ? Thanks in advance

@bozmanx 5 ай бұрын

the liquid is flux the stick is irrelevant

@PerEriksson-iw9sf 4 ай бұрын

This Ribbon cable, should it forward or reverse version?

@bozmanx 4 ай бұрын

you should get the forward version.

@eltongustavodossantosbratf7068 6 ай бұрын

Tudo bom meu querido, poderia por gentileza me dizer o modelo das placa que vc utilizou ?

@bozmanx 5 ай бұрын

A lista de peças está na descrição

@TheBeast_Blake 6 ай бұрын

How is it going I have ordered all the parts to make the sd card reader for inside the drone I just don’t understand what to download to the card for the karma drone

@bozmanx 6 ай бұрын

Hey , here is a video on how to prepare the card kzfaq.info/get/bejne/qd9-dryDrsi9fYk.html