Great woodturning tool skill booster _

Great woodturning tool skill booster __ Raffan thin spindle

Рет қаралды 4,645

Tomislav Tomasic Woodturning (Dodir Drva)

6 ай бұрын

Today I failed but tommorow I'll sucseed☺️.
Excellent tool control and pressure skill booster.
This spindle was 420mm by 18mm square.
I had a lot of fun turning it but still a lot to practice and I have a lot to do to get better☺️.
Enjoy
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lath...
STEINERT WEBSITE
drechslershop.de/en/?sPartner...
AFFILIATE LINKS
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/i...
SCRAPERS - neureiter.idevaffiliate.com/i...
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/i...
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/i...
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/i...
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/i...
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/i...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

Пікірлер: 44

@jean-louishoules5198 6 ай бұрын

Thank you Tom for this beautiful video, the failure is a good lesson and often more instructive than a perfect demonstration. 😊👍

@tomislavtomasicwoodturning 6 ай бұрын

Indeed, I agree sir ☺️

@racheldray1057 6 ай бұрын

Wow! That was a fantastic spindle. The tiny loose rings make it even harder. Brilliant job.

@tomislavtomasicwoodturning 6 ай бұрын

Thank you Rachel ☺️

@stephenpeck5076 6 ай бұрын

I was a toolmaker in the plastics industry for 45 years until I retired and I was taught as an apprentice that every mistake is a point along the way to be learnt from. I was always told that every mistake can be overcome, even if it means starting again. I am a novice wood turner and am making a lot of mistakes so I must be learning something? Many thanks for your videos, they are a great help to us all.

@tomislavtomasicwoodturning 6 ай бұрын

Thank you very much, mistakes are part of learning so both of us are doing great ☺️

@jorisdemoel3821 6 ай бұрын

Amazing tool use, and good practice for Spillikins. Thanks for another educational and entertaining video.

@tomislavtomasicwoodturning 6 ай бұрын

Thanks Joris, spilikin sticks are shorter so a bit easier 😅

@MikePeaceWoodturning 6 ай бұрын

Thanks for the inspiration! I turned a couple of short ones from a scrap I had. Great fun.

@tomislavtomasicwoodturning 6 ай бұрын

Indeed Mike....☺️

@dtork47 6 ай бұрын

That was scary to watch for me! You are a true master and thanks for sharing and teaching. Stay safe

@tomislavtomasicwoodturning 6 ай бұрын

Thank you very much 😀

@DougMilleratWoodSpunRound 6 ай бұрын

Great exercise in turning thin. Well done!

@tomislavtomasicwoodturning 6 ай бұрын

Thanks Doug 😉

@jimgeelan5949 6 ай бұрын

Oops 🤭that’s life, he who hasn’t made a mistake hasn’t made anything 😊 nice one Tomislav

@tomislavtomasicwoodturning 6 ай бұрын

Indeed , I agree sir☺️ thank you for watching

@williammaxwell1919 6 ай бұрын

"I still have a lot to... Tomislav "Never Sell Yourself Short!

@jackthompson5092 6 ай бұрын

Well done Tomislav.

@tomislavtomasicwoodturning 6 ай бұрын

Thank you 😀

@PenguinAdLitem 6 ай бұрын

Awesome. Almost a Harry Potter wand, before the end. I appreciate you shared that it does not always go perfectly to plan: catches, mistakes, and even broken spindles happen to everyone! Well done, again

@edeyden1326 6 ай бұрын

Sometimes as I get closer to finishing a detailed project, I'll tense up which further exacerbates making errors. I'll step away for a moment and then continue. Helps me That was a great spindle with two free rings and a great video showing the control needed to do this exercise. Always appreciate your projects and efforts Tomislav!!

@tomislavtomasicwoodturning 6 ай бұрын

Thank you sir 😀

@vidarreiersen4820 6 ай бұрын

fantastisk !

@naturaIIydifferent 6 ай бұрын

I like to make useful versions of this project in the way of long stirring sticks. Great practice for turning thin spindles, plus you can use them for stirring iced tea and frozen juice mix. Or for another semi-useful version, long cigarette holders. Good practice for drilling long, straight holes, then put the hollow spindle on a dead center and live center and go as thin as possible. Because they're hollow, it's even tougher. Awesome video for getting turners to try new things. And for building skills!

@tomislavtomasicwoodturning 6 ай бұрын

Good ideas there, thank you for watching 🤗

@richardbufton3605 6 ай бұрын

Good skills Tomislav

@garyjanes2358 6 ай бұрын

Excellent!

@randyrockwell6136 6 ай бұрын

Very well done ….. I wish I could get 25% of what you accomplished! Thank you for yet another entertaining training video. We appreciate all the time you put in sharing your talents with us 🤠🇨🇱

@tomislavtomasicwoodturning 6 ай бұрын

Thank you Randy,I appriciate that very much 🤗

@jimphilpott902 6 ай бұрын

great teaching video!

@pjseiber2774 6 ай бұрын

Wow❤

@johnnyb95678 6 ай бұрын

Well done! Even though there was that one issue, it was a great lesson on spindle turning. Thank you!

@frederickday7600 6 ай бұрын

You didn't fail at all. I do what you do now and again to keep on top of the skew. It happans and no disgrace at all....

@tomislavtomasicwoodturning 6 ай бұрын

Indeed, I like this kind of project to see how much I still have to learn☺️

@robohippy 6 ай бұрын

I am kind of surprised that you didn't start at the tailstock end and work your way back to the headstock. That would help deal with the whipping that starts to happen with longer thin spindles. Some thing I need to practice......

@tomislavtomasicwoodturning 6 ай бұрын

I'm leaving that approch to try on next thin spindle, although I have tried in the past and going from tailstock to the left leaves me with more whiping in the middle then going from the centar. Still I have a lot to learn😉

@reinholdege4938 6 ай бұрын

Hi Tomislav, I see that you and Richard start to form the stick from the headstock end. I hold the wood in a cup jack and usually start from from the tailstock end. I was taught, that this keeps the stick stiffer and prevents vibrating. Then I slowly work towards the head stock, finishing each part (around 1 inch) to the end. What do you think?

@tomislavtomasicwoodturning 6 ай бұрын

Its a good way, I just find that going from tailstock gives me more whiplash , on shorter spindle I would go from tailstock. That is beauty of turning, so many ways 😉

@emgiwoodworks 6 ай бұрын

Excellent craftmanship Tom! Free handing a finneal like that is not for me. Each time I do it I dislike the result; I'd rather use a story board or some other plan to get all the details at their correct spot.

@tomislavtomasicwoodturning 6 ай бұрын

Thank you 👍

@markduggan3451 6 ай бұрын

Just before it snapped, I looked at my wife and said that it was wobbling too much. Great ideas, though.

@tomislavtomasicwoodturning 6 ай бұрын

Thank you 😀

@nealramsey4439 6 ай бұрын

You should do it with a 🪠 handle. I turned one and I'm not sure what type of would it was but it was stronger than hell. Even at less than a quarter inch or about 8mm and a foot long it was tough to break by hand.

@tomislavtomasicwoodturning 6 ай бұрын

Hmm interesting, My is from beech, so not sure what kind of timber would that be....