How to Make a Bonsai Pot - Step-by-Step Process (clay slabs pottery)

Рет қаралды 10,448

7 ай бұрын

In my pottery videos on "bonsai pot how to make", I show you how to do pottery from beginners to experts, in a fun and instructive manner.
In this one, we'll explore the construction of a large convex oval bonsai pot using flexible clay slabs, my latest handmade ceramic creation. In this step-by-step tutorial, I unveil the process of crafting large bonsai pots using the clay slab technique. Join me in the art of pottery building, hand-built techniques, and the fundamentals of slab building. From the basics of ceramics to advanced pottery steps, we'll guide you through every stage of the making-of process, offering invaluable tips for ceramics enthusiasts of all levels. Whether you're a pottery beginner or an experienced handbuilder, this video is packed with expert advice and personal tips to help you master the art of pottery at home. Discover the magic of clay manipulation, sprinkle in a touch of geometry, and embrace the DIY spirit as we demonstrate how to make pottery without a wheel. Welcome into the world of pottery making, one slab at a time, and learn how to create your own stunning bonsai pottery with confidence and creativity.
Video of the oval pot from 2020 : • Making a Large Oval Bo...
•• SUPPORT THE CHANNEL ••
Support me by becoming a Patreon member:
👉 bit.ly/3G9yOtf (Patreon takes 8% commission.)
Support me by becoming a KZfaq member:
👉 bit.ly/46p3fpX (KZfaq takes 30% commission.)
For a single donation, you can use:
☕ www.buymeacoffee.com/GregCera...
•• SHOP ••
To view all my creations or purchase my pottery: www.greg-ceramics.com/
To purchase pot templates : gregceramics.gumroad.com/
•• MY TOOLS ••
Buy my homemade tools : www.greg-ceramics.com/?page=tool
Essential tools for beginners (or advancing): amzn.to/3V76ZZ2 (Amazon Affiliate links)
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/yeti-music/peace...
License code: QKVIN5ABNL0DS25R
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/all-th...
License code: GUHBUVNKKE4HTLZP

Пікірлер: 34

@Greg-ceramics Ай бұрын

🔥Support the channel by becoming a Patreon member : bit.ly/3G9yOtf ☕Or buy my a coffee ! : www.buymeacoffee.com/GregCeramics

@uv2849 11 күн бұрын

LOL! EPIC EDITING my friend, and excellent video. You’ve earned a new sub for life 😁

@Greg-ceramics 11 күн бұрын

Thank you for appreciating the effort I put into my videos! I put a lot of heart and passion into them.

@Fean9rz 3 ай бұрын

Instant like after the stop and motion intro.

@Greg-ceramics 3 ай бұрын

Thank you, my efforts are not in vain! 😄🙏

@joannpounders5567 5 ай бұрын

Great tips! Love the humor with your little friend! 🤣 Really appreciate you sharing your secrets to successful pots!

@dobe509 7 ай бұрын

Hy, just wanted to say thx. 3 years ago your videos got me started on trying to creat my own clay pots. Last year i finaly managed to creat a big 42cm oval pot that was flawless. Turns out there is a lot more to pottery, but you make it look so easy. My biggest struggles are with cracks, and warpage while drying and after firing. Maybe you could someday do a video about these topics. I also want to share a new technik that i found. 3D printed moulds out of plastik. I draw a 3D image of the pot i want to make on my pc. Than i draw the negativ as a mold. the design is similarto a plaster mold. Taking care that you can demold it properly. I then print it on my 3D printer. These molds are especially suitable for large pots. I can print a mold usually in 1 day and material costs are about 4 euros. Demolding works well as long as you use release agents. Thx for the gread video.

@Greg-ceramics 7 ай бұрын

Thank you for your kind testimony. I've also thought about using my 3D printer to make molds, but most printers don't have a large printing surface, and I would have to limit myself to very small pots. How do you make big pots? Are you combining several parts? Unless you have access to a large printer, I'll be curious how you go about it.

@dobe509 7 ай бұрын

@@Greg-ceramics Hy. As with a plaster mold, the plastic mold must also be divided. Otherwise demoulding is impossible. I only use the mold for the walls. Freehanding an oval pot with curved edges is impossible for me. For example a 40 x 40 cm raw square pot: I divide the mold into 4 parts, with each corner being 1 part. You can simply print 4 times the same corner. 1 part would then be approx. 21,5*21,5 cm (1,5cm wall thickness of the mold, 20% infill). I place the wall mold on a straight surface, which serves as a shape for the bottom. I usually fix the 4 parts of the form on the outside with adhesive tape or simply clay. Then fill it up hte mold using your plate technique. Allow to dry slowly for 2 days until the clay is leather hard. The pot can now be removed from the mold due to the slight shrinkage. From now on add feet and decorations as desired. Silicone works best as a release agent. I had a lot of trail and error, so if you want more details let me now. happy holidays

@nickhopes8821 7 ай бұрын

Great video and great fun

@Naufrago_Sur 7 ай бұрын

I'm excited to hear you have started the video series. Thanks again for a great video!

@CGKFPV 7 ай бұрын

Thank you for sharing! Can't wait to see the new series.

@akindofmagick1 7 ай бұрын

Great video! Can’t wait for your new class!!

@user-xh9xg6oh6o 7 ай бұрын

Thank you very much 🙏

@anthodelagnes7273 7 ай бұрын

Encore une super vidéo et un super boulot, impressionnant... merci Greg !

@concernedcitizen8968 5 ай бұрын

Thank you so much for these! You are so talented and its nice to larn from a master

@uibirapb 7 ай бұрын

great!!!!!

@jugado219 6 ай бұрын

Thank you maestro!

@Greg-ceramics 6 ай бұрын

🤗

@kubbonsai 7 ай бұрын

🔥🔥🔥

@tumizoomi202 5 ай бұрын

..... wow, awesome video, thanks for sharing! How thick are the slabs you are using? Looking forward to the new video series. Cheers!

@Greg-ceramics 5 ай бұрын

Thank you. About 8mm (5/16")

@philippecervantes9235 6 ай бұрын

Formidable

@philippecervantes9235 6 ай бұрын

Formida Tout simplement

@Dirtguerilla 7 ай бұрын

Second firing was meant at 1240C? Briliant videos btw ;)

@Greg-ceramics 7 ай бұрын

Thank you, yes, second firing at 1240°C, at cone 8, it's stoneware.

@gariktv8756 6 ай бұрын

Amazing work. What type of clay you used here?

@Greg-ceramics 6 ай бұрын

Thank you. White stoneware 40% grog

@gariktv8756 6 ай бұрын

@@Greg-ceramics thanks

@ilexjin 5 ай бұрын

Great video. Can we buy the height cutting tool in the US?

@Greg-ceramics 5 ай бұрын

Thank you. Yes, I ship the tools worldwide. 😉 www.greg-ceramics.com/?page=tool

@abdulrehaman-kx4ee 6 ай бұрын

Please advise glue used for joining

@Greg-ceramics 5 ай бұрын

I explain this here : kzfaq.info/get/bejne/bKlkZaio0bazaZc.html

@uv2849 11 күн бұрын

KEEP IT CHILLLL 😡