It's an easy choice if you need or want a new smoker ASAP. The Brunswick is not available. Anywhere.

I just got my Brunswick yesterday. Out of 4 walmarts in my town there was only one in stock. Picked it up and it did not disappoint.

Convinced me. I finally found one a couple of weeks ago and we've used it for several cooks. Very pleased overall. No damage when received. However, the ash pan is nearly impossible to remove. Wifi feature works great.

Great video. My very 1st and only smoker is a PB series 4v1. Bought it in mid-April of 2020 and smoked all weekends except 5. Also smoked some during the week. It definitely does the job, and it's been a great learning experience as I was a beginner. That being said, the downsides have made made me rethink PB. The series 2 looks great; however, I'd do extensive research before another PB.

thank you for making this vid! exactly what i needed!

@Grill Sergeant great video as always! I was in the same boat with everyone else waiting months for the brunswick to come in stock near me but then the new pro series 4 v2 came out and with it pretty much the same as brunswick I got it and its been great edition. even in the cold. it was 25° out the other day and held its temp throughout the whole cook.

I got my brunswick delivered from Wal-Mart last month its been working great it was delivered while I was out left in my drive way. but came undamaged .we smoked queso .baby backs ,chuck roast,chicken breasts .whole chicken and spam burnt ends everything had very thick smoke rings and great smoke flavor the probes worked well and loved having the Bluetooth app for monitoring while im out .its easy to clean and change the pellets

I went with the Pro Series 4 (v2). I can adjust the PDI controller in 10 degree increments. I guess that is an upgrade they made since you made this video. The Pro Series checked all the boxes for me. PDI controller, heat through vents, burn pot clean out, WIFI and Bluetooth. Thanks for doing this video.

Thank you for that 2 minute summary at 1:20 so those looking for quick answers can get them fast.

@Grill Sergeant: Thank you for all your videos that have helped me in making my decision to buy the Pitboss Pro Series (v2). I was about to buy a Masterbuilt, like very close to getting in the car to buy it, when suddenly a thought came into looking one last time @ pellet smokers. Someone once said that those pellets have chemicals in them and never felt like researching into pellet grills ever again. However i compared reviews with other electric smokers and the majority of folks said that the flavor you get from Pellet smokers you cannot get from an electric smoker, plus you have very less wood chips you can add at a time in electric smokers, as opposed to have a huge hopper for pellets, essentially load once and forget. Plus the pitboss pellets are all natural pellets. One point really that stood out for me is when you mentioned that for smokers that have the dial/temperature controls at the bottom, the drippings will flow down over it and become messy. That's a great point, never thought about that, that made me narrow my decision down to: Brunswick vs proseries (v2). I really don't want to wait and wait till a damaged Brunswick shows up at my house, so i am going with a proseries v2. The only drawback i can think of is the 25 degree temp increments as opposed to the 10 degree increments in the Brunswick. I guess ill just have to adjust my smoking time if i ever need a temperate in between 25 degrees. Once again, a BIG THANK YOU for all your videos.

great comparison! thanks for doing this!

Hell yeah that helps a ton

I just got my Brunswick and the back was a little dented. Still works great

Nicely done Sarge!

subscribed… very good info bro

Great information👍

Nicely done! Did a Grill review from inside of Lowes! Tried that once and didn't get 30 seconds before I was told to leave!

Very nicely done.....

Everything you said about all 3 smokers is on point. I have the Pro series 4 V1, been using it for half a year now...NEVER had a issue since I brought it home from Lowes. I like the Brunswick but way to many people are complaining of shipping, damages, and constant error codes when in the middle of a cook. I like the V2 pro series and really thinking of switching from the V1 to V2...based on the upgrades I have seen. I don't know anyone that has the V2 and if they do are they having any issues. I love the fact that V1 and V2 are the same price.

I have the pro version 2, I love it. My wife even uses it

I just bought a Brunswick for $299 at walmart, last week. New, in the box. It was not labeled as a sale price, but it was the last one that they had in stock. I love it, so far and really appreciate your related videos. Thanks!

I purchased the Pro Series 4 Version 2 this last weekend and they must have already made changes to the controller. You can now set by 10 degree increments

Good video!!!😉💪

Just bought the Pro v2 at Lowes for $100 because it was missing 4 screws. Which I had ones that fit at home! So stoked!

We love our Pro Series 4 V2. I wondered why they limit the temperature settings though??

I’m making the jump from propane to pellet, made the choice of getting the Brunswick! Easy to find, went on the Walmart app , it was unavailable, so signed up for a notification of availability, a week later I get the notification and made my purchase! Should arrive Feb 28th, and hopefully with no shipping issues! ( but then again, most of anything shipped always has an issue!) thanks for the videos, made me smile when I recognized the Lowe’s! 😉💯

Just scored a Brunswick on clearance at my local Walmart for $300! Feel like I won the lottery! Thank you for your awesome videos! Really appreciate you sharing your knowledge. Also love the Facebook group!

I couldn't wait anymore as they have no shipping date for the brunswick.

Would love to see the competition series compared to these 2.

I found a Brunswick at Dirt Cheap in Slidell, La for $175 yes you read that correctly $175 😂 no issues at all. Auger had some old pellets in it I cleaned it out works like new.

I want a grill sergeant sticker for my 4v2 that would be sick

I was at that very same Lowe's today and saw the series 4. Thought I'd check out this video to compare. I think I'll still go with the Brunswick

Can you add a video with the burn out for the Pro series 4 V2

I also wanted the Brunswick but never in stock, found the other and bought it. Love it

I didn't see anyone else comment but just wanted to state that I just bought the same Pit Boss and the control panel now allows you to adjust in 10 degree increments. However, the lackluster Smoke IT app does not allow this and is only 50 degree increments. If you accidentally change the temp in the app you will have to go manually correct it on the smoker itself.

I bought the Series 4 V2 about a year and half ago and mine adjust a 10 degree increments. Just started watching your channel.

Hey Grill Sergeant I have enjoyed your videos they are excellent. I have one question I am thinking of buying the pro series pellet smoker. I have heard that they do not give a good of smoke flavor as a charcoal smoker. Is that true? Thank you

I have solved most of the issues on my PB4V2.....Wifi....erratic temps...etc. But there is one that I can't fix without a firmware update. The input RTD measurement has severe lag on the display. The actual temperature inside the smoker gets to temp much much much faster than the screen shows it. I was smoking chicken this past Sunday and with separate temperature probes inside about 1/4" away from the smoker RTD....it shows the temperature getting to setpoint(200 degs F) from 150 Degs in about 10 mins...and it levels off right at 200. But the display on the smoker said it was only 181....and it took 45 mins to show getting to 197....but the internal temp just stayed at 200 the whole time. I am going to submit this to Pit Boss....because most people think it is not getting to temperature, but it really is...strange input filtering lag for sure. Would be easy to fix....I believe it is a similar issues like the 1150 that if you notice they sped up the RTD measurement dramatically to fix the instability on that smoker. BUT.....I LOVE it....and will work around this issue until they fix it or not....because it is built like a tank and easy to clean...is amazing....except for a few software quirks. I have not used my RecTec RT-380 since I got this smoker...more space and easier to clean for sure.

I’ve got the V2 and was considering getting the Brunswick but I really want the pro 1600 elite. Not sure if I should get both or just shoot for the 1600 elite

Pro 4 V2 has another upgrade over V1. The handle on the back is much beefier. I think it's the same size as the one on the Brunswick. That being said, I have the V1 and have never thought the handle was too small.

yeah i purchased the Pro Series version 2. My only complaint really is you can't fine tune temps. its either 175, 200,225, 250 300, 350, 400. I would at least have 15-25 degree intervals all the way to 400.

I have the pro series. Any recommendations and things to make cleanup easier?

I bought the brunswick and have had nothing but trouble with it. Pitboss tech told me to throw it away and buy a new one. That some good customer service ... I bought a green mountain next and it's been awesome.

My auger jams non stop! I have the pro series and it’s about to get retuned if my phone call to them doesn’t give me a diagnosis. Great video though.

Dig the shirt. Where did you get it?

My wife just got me one for Father’s Day the 4.2 is will the burn off be the same as I seen in your past videos. And I want to put corn on the cob in it what do you suggest for how long to cook corn on the cob for

Why am I just like Andrew every time I see propane!!!!!! Lol 😂

I the light in the Brunswick usable and is it glass or plastic?

I cooked for the first time yesterday on the pro series V2. 5lb. Pork butt. I cooked the butt for 6 hours on the top shelve and then put a rack of ribs on the middle shelf. I pulled the ribs off after 5 hours and they were done. The butt was on the grill for 11 hours and the temperature never got above 195. The smoker was set at 225.

I have a v1 and like the fact that the juices end up in the water pan might be just me but I feel that the flavored steam ads to the food if not just the smell

Do you plan on doing a video on cleaning out the Brunswick?

PIT BOSS needs to update the SMOKE IT APP and the firmware via Wi-Fi! No excuse not to! I have this exact same model and it needs a tighter temperature gradation!

Do you see the vents on the side being an issue to clean?

Loving your content bro. I'm looking at offset smokers or a vertical pellet smoker like these. I don't really dig charcoal smokers since everything cooked on them tends to taste the same. What's your take on smoke flavor from these pellet smokers? I've heard it's a struggle to get enough smoke with pellets.

whats the best way to clean it? brunswick plat, series

Wow, almost to the day 1 year after this review and the pro series 4v2 is now $499 at my Lowes. +$100, not cool.

I got 2 Brunswicks 1st was damaged beyond repair waited 6 months for 2nd witch was damaged also it's Wal-Marts delivery no tail gate service

Well since I just bought the pro series 4, my next big question is this: How do you like that Tundra?? I'm in the market for a new truck, and the tundra is on my short list lol

With two if the doors is warped like mine is then it won’t seal correctly.

I have the Brunswick on order. Then found this! Not sure if I should cancel the order or not!Lets get it!

Sarg . I had a Brunswick and it was junk, always got earor codes, then the auger stopped working . Nothing but troubles… Finley got rid of it , and now I have the series 4 version 2 and it is much better ……

Can that V2 door latch be put on the V1? That is the only thing I hate about mine, it does come open easy if not careful.

They have upped the price to 449.99 now on the Pro Series 4 (v2) dang it!

My local Walmart has 3 Brunswick in stock at $447 while my Lowes also has the 4V2 for $449. I'm completely new to the smoking game, what would be the best option? I tried a charcoal weber smokey knock off by Cuisinart and I do not recommend it to anyone lol.

How do you get at the ignitor?

Have you ever used the camp chef brand? Was looking at the camp chef wifi XXL vertical smoker, has gotten good reviews, but hard to find as well.

I bought the Brunswick and have had nothing but problems. They show up Wed to take it back and get a refund. Pretty bummed it didn't work out and maybe i got a lemon. At least i got one solid cook out of it! lol

Crazy that you got the ProSeries for $399...$499 at my lowes. I doubt there's $100 more in content

My v2 goes up by 10 degrees increments

Is there a way to adjust the door to make it tighter so it doesn’t leak so much smoke in the pit boss pro series for

One more question Do you have any thoughts on the sportsman’s pit boss vertical smoker? Thanks

nice computer screen 👍😎

I feel like it should only allow you to smoke at 420 if you're using cannabis pellets.

I’m looking at buying the pro series 4 v2 from Lowe’s for my new smoker. I’ve watched several of your videos and I see that you have other pitboss models as well. What’s your overall opinion on the series 4 v2? For the money it seems to me to be like the best deal as far as pellet smokers go. But I’m still uneasy about buying something thats massed produced. My brother in law has had several smokers and his new one is a Rec Tec and he says he wouldn’t buy anything but that again in the future. Options on that? Thanks in advance

I heard that the brunswick has a big issue where the hopper catches fire pretty often compared to other vertical pellet smokers

Hey do you know if a 12lb turkey would fit in the new pit boss pro series vertical? Thank you

The Brunswick is $50 more not $150. The door latch is not adjustable on the version 2. There is a reason the Brunswick is hard to get. It is a better all around build.

This is exactly what I’ve been asking myself for a few days now. But there are also availability issues at Walmart with the Brunswick, so it might not be a choice.

So guys...does anyone know if Pitboss has any plans on offering the Series 4 in the larger series 7 size?

IMO it doesn't deserve the pro lable if the controller doesn't do 10 degree increments. I don't know why pit boss does that.

I’ve had my pro series 2 for about 6 weeks now. I think the most disappointing thing about it verses my friends version 1 is that the version 2 doesn’t have a smoke setting. Am I over looking something?

On the Brunswick what is the temps running at the cooking levels compared to the temp the smoker has?

Why not compare to the Competition Series? I think its a good split between the pro and brunswick

I stopped inside of Lowe's and the Pro 4 was 449.99. I stopped back inside of Lowe's the next night and the price had increased to $500. I believe it's probably the set price nationwide. It's a bummer because the original staring price was 399.99. Do you think it is worth $500?

How can you tell if you are getting pro series v2 if you are ordering online?

The Pro Series controllers have issues. I would avoid those until they get issues worked out, lots of complaints. The controller for the Brunswick is much better. As for me, I have the Series 3 copperhead and it is a champ so no need to get another at this time.

You said that with the Pro Series you will have a little problem with a 20 pound or higher brisket. What about the full slab of ribs, will they fit w/o breaking them up?

I guess my main goal is brisket....series 4 v2 is tight younsay but can I achieve the quality desired with the temp controller being less precise ???

I currently have the Pit boss Copperhead 5. My Walmart has a boxed Brunswick on clearance for $300 right now. Is it worth $300 to get the Brunswick or is the Copperhead 5 better?

What state location is your Lowe's store ? Our Lowe's is $500.00 Not 400.00 for the Smaller pro model

Wow... im watching this a year later? Ish... and the Brunswick is 600$ And the pro-series 1077 is 500$.... they really enjoy price gouging people... can only find these at Lowes or Walmart... the quality control from these companies is super low... so upsetting

built in temp probes on series 4?

are the pro series 4 v2's only sold at lowes, and do they ever go on sale?

Is the controller PID?

Just picked up the pro 4 v 2 at Lowe’s for $499 😣.

Does a turkey fit inside?

I bought the Brunswick, and it came in destroyed! could not even use it. sent it back to walmart and then went to lowes and bought the P4V2. I have had this smoker for almost a year and I'm not happy. it will not hold temp! if I set it for 225 it runs a 170 to 180, this weekend I did a overnight smoke of 2 pork butts @ 225 deg and when I woke up at 6am the temp was 218. is anyone else having this issue?

Do you live in AZ?

They raise the price of series 4? I’m seeing them for $450

Currently the v2 pro is $499 and so is Brunswick. All pit bosses at lowes have gone up $100. SMH.