Grit Guards V Detail Guardz Turbine V Chemical Guys Cyclone

Grit Guards V Detail Guardz Turbine V Chemical Guys Cyclone - Grit Test simulation

Рет қаралды 54,388

5 жыл бұрын

Grit Test simulation...
In this video we do a shootout comparison of 3 popular bucket dirt guard systems.
All products featured available in the follow link
tinyurl.com/yaxby9t4
(try code "forensic" for 10% discount)
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Пікірлер: 290

@LGarbac 5 жыл бұрын

thats why i dont use 2 bucket method anymore. Its so much easier to rinse mitt with pressure washer (white nozzle on low psi), and squize out the rest of the water. You dont even have to use grit guard, but its great point in having one in bucket. I washed my show car for years without gritguard in a bucket and it was swirl free. The most important thing in washing is regular rinsing, good prewash, quality shampoo lubrication and quality wash media and dry media.

@lucidworx 3 жыл бұрын

Exactly. Most people go straight to the foam cannon. I always rinse with a pressure washer first then put the foam on after. Doesnt matter if the car looks clean. Always rinse first.

@Romu1us 5 жыл бұрын

You always provide SUBSTANCE amongst all the fluff in the detailing industry. Thank you for all your hard work and dedication!! it really is helpful for the people learning about detailing. (followed you for 2 years and you always deliver)

@ForensicDetailing 5 жыл бұрын

thx jordan, worth saying this video is just my opinion. And its so damn subjective, I think though as long as you give the reasons and explain though people can sort of decide whats best for them. this is just an attempt at testing 3 cool options.

@iceman7306 5 жыл бұрын

Already have the grit guard and was on the fence about detail guards model, think you answered all my questions so I thank you for that my friend. Awesome test thank you. Kurt

@erikdatadeen134 5 жыл бұрын

Youre an outside-the-box thinker jon. Absolutely love it. Thanks

@tharealkovo 5 жыл бұрын

Great review! As others have stated, I have simply gone to a single bucket, many mitt wash method. I have about 10 mitts, each designated for different parts of the car, and they are used once per wash. No need to worry about dirt in the bucket, etc...

@LSD04 5 жыл бұрын

I’ve been using a Grit Guard on top of the Cyclone for about 18 months now and have been quite happy with this.

@henri6595 4 жыл бұрын

Thank you for your hardwork making this video! I personally use the pressure washer and MTM Foam Cannon method for quick washes. If I'm doing a full weekend detail I would use: Pressure Washer, Foam Cannon, Three Buckets (Meguiar's) with CG Cyclone (X2) & Meguair's Grit Guard (X2) stacked, and Five Meguiar's Mitts. This might be over kill but it's my car I'm cleaning. The double stacked Cyclone and Grit Guard actually do work well. All the dirt stays at the bottom of the yellow bucket! A good tip is to change the Rinse Bucket water 1/2 way through the car. I've watched the whole video and read every comment too. I picked up another good tip in the comment section. Ring out the water on the Mitt before cleaning it in the Rinse Bucket. I got to try that one out this weekend. Keep up the excellent work!

@LSD04 5 жыл бұрын

I think the pre wash is also more important than any Grit Guard or whether you use 1,2 or 3 buckets or the multiple mitt/microfibre method. You have to swipe your chosen wash media across the paint so if your pre wash was poor then so will be your results. It’s all in the prep.

@richardseem7948 5 жыл бұрын

another great comparison and product review Jon.

@GarageTherapyOfficial 5 жыл бұрын

Best review on these to date and I think it is definitive as it gets. Big thumbs up!

@ForensicDetailing 5 жыл бұрын

legend cheers marios :)

@longden57 5 жыл бұрын

I've found that the standard grit gaurd works really well in the sort of classic black builders bucket which has a very slight conical shape, this serves to wedge the grit gaurd in-place about half way down, leaving several inches below it! And it means that gaurd doesn't move when giving the mitt a good twist! So I've used that method as a rinse bucket ever since 🙂 give it a try, you might find it a nice cheap and easy little setup. Great video as always mate 👍

@leonardocainca4317 4 жыл бұрын

Kind of video I most appreciate, studying practical responses of applied theories. Thanks for sharing man 🎓

@TannerRE 5 жыл бұрын

ive been thinking about getting the detail guardz version to replace my grit guards so this was super helpful. thanks for another great video Jon

@delaguila1486 3 жыл бұрын

I did and I am happy with the change

@BlazinTrickShotz 5 жыл бұрын

Good video mate, well done!

@vtecaccord96 5 жыл бұрын

Great video! I have recently switched to the multi Mitt method so I will just keep my standard grit guard.

@1ZZT223 Жыл бұрын

You are a legend. Much respect

@danmorrissette4814 5 жыл бұрын

that 45* angle grid is a cool idea! thanx for all the effort you put in your good videos!! :-)

@adhithyasodhi3203 4 жыл бұрын

Thanks for posting this. I use the Chemguys specifically because it seemed the best design to trap dirt. Now I'm going to plonk a grit or detail guard on top as well :)

@indepthcardetailing2254 5 жыл бұрын

I use the standard grit guards, but doubled up.

@berczigabor 5 жыл бұрын

Love the close up shots with the torch light, and the methodology

@ForensicDetailing 5 жыл бұрын

gabor :) appreciate all the cool feedback over the years your a legend.

@ger_1275gt 5 жыл бұрын

Great video. Very informative.

@stevewilliams6191 5 жыл бұрын

Great idea for testing Jon and some interesting points you've made👍.I've been debating to switch to the 2 bucket method for a while now and almost bought the original grit guards with washboard attachment. But price aside, the detail guardz dirt lock do look very good, so it's got me rethinking!!

@mistersniffer6838 3 ай бұрын

Now THIS is what I am talking about. Thanks bro!!

@theruskins5107 5 жыл бұрын

If I didn’t already have a grit guard, this video is a helpful review. But I use two buckets 4 grit guards(2 in each bucket) n the black mit scrub thing in the rinse bucket. So possibly over kill but it works for me n I have no fear of large dirt particles get back on to the car. Keep up the great videos n hard work John.

@Stickymicky25 5 жыл бұрын

Grit Guards and washboard all day long, but I like the idea of a CG cyclone at the bottom... I’ll grab one and try that out! Thanks for that! Great vid as always!

@km9643 5 жыл бұрын

Great idea for a video!

@h2t26 5 жыл бұрын

Nice job as always. I currently using the two buck method, with 3 inserts in the rinse (cyclone on bottom and grit guard on top, with the wash board attachment) and 1 in the wash bucket. However, I'm currently purchasing many wash mitts to eventually have enough to move to the no bucket or a least one bucket method. I live in two story apartment and carrying all that water and buckets up and down is a pain every week.

@derekcole6750 5 жыл бұрын

I use the original grit guard and have never had a problem. In addition, I've tried Autoglym's new drying cloth, had it a couple of weeks. I'll definitely be getting a couple more. I also tried Autoglym 's Polar Seal today, I applied it after using their Polar Blast on a new vehicle with Super Resin and Ultra HD Gloss. Looking forward to seeing how it performs.

@boothmeister6024 5 жыл бұрын

Interesting results. I do use the basic guard but I agree with some other comments and with one of your previous videos. Multiple mitts for different sections. Seems the safest bet.

@inxs13 5 жыл бұрын

Chris Booth I’m starting to think the same thing. Soap bucket for the towels you mentioned and a second bucket used for chucking the towels after all sides have been used then moving to clean one. Dirty towels never entering the soap bucket would allow the remaining soap to be used later if you put a lid on you bucket. Not a big deal but some of the high dollar products would be more economical if that was a concern. Brian from apex addresses that in one of his videos. Glad these guys share so much experience ! It sure helps in forming my own opinions 🤘🏼

@davidbee8178 5 жыл бұрын

@@inxs13 Yes, you are certainly on the right track mate! For an expansion on the 2 or 3 cloth no-redip method, please see my comment to Jon near the top of his KZfaq entitled "The Best Car Soap Shampoo - 20 Product Shootout" Using a bucket with a lid is THE best way to conserve your wash media! Cheers and happy washing ! BTW . . . To those who think this method is "over the top" . . . nope. The "harm" you do to your clear coat is NOT noticeable on a per wash basis using the old method. But it IS cumulative. It really IS time for a new car wash paradigm . . . The ONLY thing that will suffer is grit guard sales : )

@LothianValet 5 жыл бұрын

I have the standard and the turbo grit guards. This was interesting to see the difference between the 3 of them

@maxburg4817 5 жыл бұрын

Good vid Jon 👍🏼 I think these videos are always good as it not so much about the products necessarily but the insight is for the way we should use these products, so we thank you for that. After years of cleaning You’ve made me realise that actually one shouldn’t be wiping the wash mitt down the bottom. Bloody good ! I’ve doubled up on the grit guard for a while now and I think it works better for sure. 👍🏼

@ForensicDetailing 5 жыл бұрын

thx max. Its hard to walk this line, doing this is like a tightrope. its also one of the reasons the comments sections are so damn usefull because its like a feed of other good advice and perspectives

@maxburg4817 5 жыл бұрын

Forensic Detailing Channel Totally agree Jon... you’re a braver man than me... 👍🏼

@KenVic02 3 жыл бұрын

Great analysis. Fitment is key as you say. On ocassion if I dont seat the guard quite right, it will float up. As far as stacking, unless they lock together seems the top guard will move or float. I supposed they can be tie wrapped together and rely on a good friction fit of the bottom guard...don't know. As another poster said below, I don't bother with two buckets. I spray the mitt with my stubby gun and ring before re-dunking. The car's been pressure pre-rinsed, foamed, pressure rinsed. By the time I do my contact wash, the majority of the heavier grime is gone so I feel good with the one bucket and rinse/ring of the mitt. A good drying towel and drying agent is just as critical of a step as well to minimize micro-marring.

@killacamfoo 5 жыл бұрын

I started double stacking the original GG, and I think it helps a bit. Use their buckets now perfect fit.

@AussieDetails 5 жыл бұрын

Another great shoot out review Jon! I have inexpensive generic debris guards that I got from the local car parts store here in Canada (Canadian Tire) that I have in the bottom of my buckets, then I stack the actual Grit Guard on top of those. I wanted to keep the mit as far away from the bottom as possible. I do like the vacuum effect of the Turbine Guards so I'm going to pick up a couple and try them this spring. Thanks again for a GREAT review! Roll on Spring!!!

@ForensicDetailing 5 жыл бұрын

Im just not sure about that turbine effect :) at least I cant seem to like see like some sort of draw of clean water down as a result of pumping. but like my ability to measure it isnt great,, so jurys out on that part of the product claim at least for me. but I just simply like the DG design generally.

@AussieDetails 5 жыл бұрын

@@ForensicDetailing I watched their video a few times and it seems as if the ...for lack of a better word...sucking effect happens as you draw the mit up after the initial downwards press. I guess I'll have to see come spring how it goes. Thanks again mate!

@Audittr2108 5 жыл бұрын

Can always rely on you Jon to come up with original ideas for product test and comparisons. I just have the original grit guards. Two in my rinse bucket and one in my wash bucket. They do the job really well. If I needed new ones I think I’d try the cyclones but doubt that will ever happen as the originals last forever!

@ForensicDetailing 5 жыл бұрын

thanks chris appreciate it mate. I think thats like the best thing is like to try the other ones the next time you need to upgrade. althoguh these things seem to last a lifetime :)

@stevenmccall2127 5 жыл бұрын

great video to prove why NOT to buy into the two bucket grit guard system. Spent the money on multiple mitts and never ever put them back into the soap bucket and you will never run in to cross contamination. All that said love the clear bucket and thanks for another great informative video.

@johndoe6032 Жыл бұрын

If you’re just washing you own car you can just buy multiple mitts and just use a fresh mitt instead of rinsing. You can find good quality microfiber mitts for lass than $10. It’s pricier, but the mitts will also last a lot longer with lower use and good care.

@Antto 5 жыл бұрын

I use one standard grit guard on the bottom of the rinse bucket and on top of it I use the angled grit guard to rub my mitt against it. I do not use any grit guards on my wash bucket because it's always clean or as clean as it ever can be. 1 thing is that I do not scoop water from the wash bucket so if there is few tiny particles of dirt I will not bring those up to my mitt.

@SecretSauceyjuice 5 жыл бұрын

Personally, I use a cyclone in both wash and rinse buckets, and I recently put the detail guardz product on top of the cyclone in my wash solution bucket. I had the same intuition that the cyclone kept the dirt down the best but also let the least through. The regular grit guard seemed way too open to me. So I figured this particular combo would work well. I have clear buckets and can confirm in real wash scenarios that the combo is superior to either on their own. Ultimately, whether you use the grit guards and two bucket method or single bucket with multiple mitts, you can still introduce marring either way if you're making contact with the paint and it's not perfectly clean. At the end of the day, minimizing that marring is the key. Grit guards are useful products for those using the two bucket method.

@Reptielenfreak 5 жыл бұрын

p.s. these are the usefull reviews that we all can learn a lot from

@barrygwilliam5367 5 жыл бұрын

So glad the grit gard came out in 1st. I've been using Meguiars grit gards as I got 2 free when I bought 2 Meguiars buckets. I tend to have the top 1 at an angle so I can scrub my mitt better.

@delphinebez3045 5 жыл бұрын

Brilliant !

@JimmyG91 5 жыл бұрын

Ive always used cc cyclone in the bottom with the grit guard on top in both wash and rinse buckets. Then the bottom dirt stands still and i can rubb the washmitt on the grit guard to release the dirt. I also use one merino whool washpad for the roof, glass and hood and a microfibermitt on the lower dirtier half of the car and the back. This way i think i cant do much more to prevent swirls.

@stanleyfleire3279 5 жыл бұрын

I think the best test would of been to start with a glove and measure out equal sand for all 3 products to tests. Put the sand on the glove and push it up in down in the bucket to simulate washing, see which unit gobbles up all the particles and what is left floating around in the bucket. All these units like you say are designed very differently, so to see a test like this would of been more of a real-world scenario since the debris doesn't start underneath the screen when you are washing.

@christophertapkins7515 5 жыл бұрын

I have gotten rid of the 2 bucket grit guard method. I found the multiple wash mitt method is far superior because I never have to use a dirty mitt, I don't have to waste time cleaning the mitt and I only need one bucket so I don't use as much water.

@TheBennynyc2 5 жыл бұрын

Christopher Tapkins yup I have been this also ever since I hand washed my vehicles. Best sys hands down

@MCVenomzz 5 жыл бұрын

How many wash mitts would you say you need to wash one car? I'm curious because this seems like something I want to try

@TheBennynyc2 5 жыл бұрын

Evolq the way I do it. 2 sided mitts. Foam up a buck with 1/4 up with water and your car soap and let your mitts soak in the foamy goodness. One side per panel then flip for the next. After lay the dirty mitt on the edge of the bucket, don’t let the dirty water run in to the bucket. Grab another mitt and repeat. (Depends on the vehicle size for how many mitts and how filthy. If chucks of mud this is not the best option) Another method I also do is Foam blaster (not canon) rinse the car off of loose dirt. Foam vehicle. Foam mitt work one panel then turn nob to flush mitt with fresh water and remove dirty and foam and on to the next panel. Not including tires and rims full size Sedan about 15 mins

@user-hl9tb3qh7z 5 жыл бұрын

Well, you will have to use plenty of water to wash every single mitt then after, as well as plenty of time thoroughly inspecting each of them looking for any remaining dirt & brushing them all... but the wash itself will be quicker, that's for sure. I would need 15 to 20 mitts to perform what I consider it is a safely multiple mitt technique. Meanwhile 2 (5 gallons) buckets method will be fine for me. ( with actually 3 girt guards inserted inside the "rinse" bucket, and 1 on the "wash" one )

@TheBennynyc2 5 жыл бұрын

Z Z to each is own. I think the two buckets and all the grit guards is the industry making money. I have started out with all that but now just do the 2nd option that I listed.

@sylvainmarier4818 5 жыл бұрын

Always great video Jon, that’s really nice that you take time to do some comparaisons. As some mention, i never used 2 bucket method and I use a 3 gallon bucket. I just rinse my mith with the hose, I use less water in that way.

@erik9108 3 жыл бұрын

Same here. One mitt that's rinsed with the hose after each panel. Sometimes twice for the rear if it's very dirty and I've never seen dirt sediments in the bucket. Using the flat setting of the hose attachment for a stronger spray and wider coverage, the dirt quickly sprays right off.

@sylvainmarier4818 3 жыл бұрын

@@erik9108 Lol same as me !! Flat setting on the hose ! Great to see I’m not the only one doing that :-)

@SilveryFoxster 2 жыл бұрын

Good review Jon, I use the double stack Grit Guard in my buckets with the washboard in the rinse bucket. If the Detail Guard also had a washboard attachment they’d be on to a winner. In the mean time I’ll be sticking with the Grit Guard.

@cliffgray9155 5 жыл бұрын

Great stuff join.two grit Gard's and a wash board.thats the way to do it mate.!!!!.

@BlazinTrickShotz 5 жыл бұрын

haha! just had a good laugh at 16:22 It's like you looked at it and didn't know what it was for the first time haha!

@ForensicDetailing 5 жыл бұрын

Im getting old man :( I had to do lots of retakes because I couldnt remember what each of the products were called. like kept calling one the vortex and the other one the hurrican or tornado. brain fade.

@jasonphillips3865 5 жыл бұрын

The "thin ridge" on the bottom of the CG Cyclone is called flash. It's a result of either bad tooling where there is a slight gap or its incorrect machine processing, ie over pressurized of the plastic actually blowing the tool open slightly.

@paulcarpenter4215 5 жыл бұрын

I suspect the grit guard fitted with a washboard will overcome most of the negatives but of course you have to factor in the extra cost. I have a single grit guard in my wash bucket and a grit guard with a washboard fitted in my rinse bucket. I am not sure whether the one in the wash bucket is superfluous but you never get all of the dirt out so I figure it’s best to have one in the wash bucket. I like the idea of the gritguard with a washboard sitting on top of a chemical guys one. I certainly feel that any of them is worth having rather than not having one at all. One negative of a tight fit of course is that you will have debris stacking up at the sides rather than falling to the bottom of the bucket were it a bit more loose

@carlosthejackal7847 5 жыл бұрын

Interesting Video Jon . I use the standard grit guard in both my wash and rinse buckets and they seem to do the job great!! I would say my wash mitt never gets below half way down the bucket though I rinse it out with my hands near the surface then dip it into the wash bucket again only near the top. I am hoping before I return any heavy dirt has long sank to the bottom and would not get back into my Mitt. That's just the way i do it. I am hoping my pre contact wash procedure is good enough to remove the harmful big dirt bits.

@hermittanimoto9325 4 жыл бұрын

Great vids Am now Subbed ;)

@PolishedandWaxed1 5 жыл бұрын

Great video, I personally use the cg one as a base and the grit guard on top. I find it's just lowering the risk and for not a big expense. The cg guards were on offer for 6.50 at one stage and I got my grit guard for 7. So for 13.50 its not breaking the bank and helping toward a safer wash. Great work jon

@PolishedandWaxed1 5 жыл бұрын

I also add a couple of mitts just to reduce risk further

@ForensicDetailing 5 жыл бұрын

@@PolishedandWaxed1 thanks man, Id love to get your take on that DG one. damn tough to rank these it really depends on personal criteria. so often the comments give a good broad representation of what other people make of this and this one is as divided as all of them :) the thing I like is we have credible options to explore that are unique and designed to be different.

@Retset 5 жыл бұрын

Great to see these visually tested so well. However, I still use your one bucket wash! I love simply spraying the guck out of the mitt between passes - seems to be much better than bunging the mitt back into increasingly dirty water! I use a 97p B&Q bucket with good car soap, a small splash of ONR, cheap Chinese short hair mitt and the Hozelock multi spray device. I use my 20L bucckets for storing various car and wheel wash tools for easy of carrying round the car ...

@ForensicDetailing 5 жыл бұрын

man its cool to see peeps using that. a lot of times in the summer I still just quickly grab a bucket and soap and mitt throw some onr in there and some soap and go round the car with the hose in one hand and the mitt in the other.. little rinse first and away and Im round the car in not much time. but I guess its not really that kind of credible, its like a good quick wash method i think.. but Ive always felt its safe enough and quick.

@Retset 5 жыл бұрын

@@ForensicDetailing I think it IS credible! Wash the bits out onto the driveway. The Gary Deane method (multiple cloths) is also very credible but results in many more cloths to wash! I use your method on a not too dirty car, which often means it follows on from a snow foam.

@ChiYoungKC 5 жыл бұрын

I use a dirtlock stacked with a grit guard and a washboard in the rinse bucket, the grit guards have zip ties to have them fit snug.

@Puddingtops 5 жыл бұрын

I find the one bucket method using the hose pipe to rinse my wash mitt after each panel works very well especially with ONR added to my Bilt Hamber shampoo. Great review though👍👍

@ForensicDetailing 5 жыл бұрын

works great in the summar which your less reliant on the pressure washer and heavier films of dirt perhaps are less in play. I still do that on the golf. hose, bucket with some BH and ONR and give the car a very quick clean rinsing out the pad with the hose and also using the hose to keep the car cool and not dry out.

@mickperry6248 5 жыл бұрын

Bilt hamber shampoo do you like it?

@ForensicDetailing 5 жыл бұрын

@@mickperry6248 yer i do mick, it cleans really really well, good value, suds up if you want it to.. have a watch of the "best shampoo" shootout video on the channel where we compare 20.. most automotive car soaps nowadays are superb, cost for wash became one of the most important things for me in that test.

@mickperry6248 5 жыл бұрын

What ratio are you using the recommend ratio on the bottle I don't find is enough

@mickperry6248 5 жыл бұрын

Unless it's just me reminds me of autoglym body shampoo

@stwg32 5 жыл бұрын

Nice video Jon. As crazy as may sound i've never even considered using the 2 bucket method with grid guards. I just use the one bucket and invested in 8 mits that I just put aside after using. If need to use one of them again, I'll just rinse it straight under the hose. Not all people are as crazy as I am of course 😉

@kevinmfb13 5 жыл бұрын

I'm in the same frame of mind. A dirty mitt never touches the vehicle again. More mitts less buckets and gadgets 👍

@TheRiass 5 жыл бұрын

Good Video bro

@remyhorsdage8045 5 жыл бұрын

Thank you Jon for always thinking out of the box or should I say bucket. Can you rerun this experiment using the two bucket method with car soap. I sure you would see the residual dirt being trapped in the soap suds on both buckets causing the mitt to mar or micro scratch your car's clear coat. You can always spray off your mitt after the rinse bucket before going back to the car soap bucket. Instead of the Grit Guard Washboard you can purchase for $3 a Wooster small or large plastic paint can roller grid. I'll stay using the one bucket method with seven mitts.

@ForensicDetailing 5 жыл бұрын

one of my patrons suggested to test with car soap. So I did put some into the ghost bucket but it didnt really effect anything.. because its just sand. It wouldnt have an impact on the test criteria I was looking at in this test. but would sort of help to break down real dirt in a normal bucket and effect things perhaps.

@Taooflu 5 жыл бұрын

3-4 good mitts, one per panel, one bucket no grit guard ever needed.

@439530 3 жыл бұрын

This is the correct method.

@marknewman2756 5 жыл бұрын

Great demo Jon just to ask you where did you get the clear bucket from cheers

@bradboustead1682 5 жыл бұрын

Thanks for the video. One suggestion is to dab your mitt up and down and scruff it with your other hand nearer to the top of the bucket. Try to stay away from the dirt in the bottom and other dirt trying to find it's way to the bottom.

@ForensicDetailing 5 жыл бұрын

I just like the little washboard thing but yer.. the washboard doesnt work great with say a long shaggy wool mitt. works great with the microfiber madness pad though. can use your hand like you say. cheers mate

@jc7879 5 жыл бұрын

Great video Jon. I’ve got the grit guard and the turbine dirt lock. I feel safer with the dirt lock knowing there is a lower likelihood of dirt popping back up. However, in regards to fitment, I found the turbine dirt lock not to be that great in one of my bigger buckets. Going forward, I only use it in the ghost buckets and atomiza buckets. It refuses to sit snugly in my Martin cox buckets.

@ForensicDetailing 5 жыл бұрын

yer seems to be an important point about fitment. gonna be a real nightmare for the guys designing this things to achieve a perfect system with all bucket types. would almost be good to have a detailing "standard" size bucket or something so they could design to a fixed criteria..

@jc7879 5 жыл бұрын

I couldn’t agree more Jon. Life would be so much easier if they had a set specification for detailing buckets. Somebody needs to standardise this! By the way Jon ... we all knew what was on your mind ... when you let it slip 😂😂😂

@mattb8440 2 жыл бұрын

The ridges on the CG dirt cyclone are for scrubbing your mitt on them.

@chriscuthbertson 3 күн бұрын

Cyclone at the bottom of the bucket with a regular grit guard on top..... I call it the 2 guard method ;)

@waynefromcanada 5 жыл бұрын

I use them Jon. The grit guard model. I see them more of as a way of minimizing any possible damage. I don’t think either one is better than other, but using them I think is part of the evolution of detailing. Fun times though when we can discuss the pros and cons of either. I love this channel.😂😂👍

@SuperMickyMc Ай бұрын

Good comparison. I've found the Cyclone needs you to swirl your water round. If you do that, you can see the grit getting drawn down the nozzles & under the guard.

@tafl-9198 2 жыл бұрын

Thorough pre-rinse with pressure washer 2 buckets. Grid guard in both. Wash board in rinse bucket. 1-2 mitts for upper panels/upper half. 1-2 mitts for lower panels/lower half. Single use sponges for under carriage, wheels and wheel arches. Use a good soap. Wash top to bottom and front to back.

@johndoe6032 Жыл бұрын

Just buy more mitts and pick up a new one instead of rinsing and reusing. This is the best option for home users washing 1-2 cars.

@rickreese4188 5 жыл бұрын

Doubled up Grit guard with wash board on some occasions.

@metalpolishshop 5 жыл бұрын

The original grit guard with the add on scrubber piece is the combo that I like. I actually do like the loose fit as I can remove it easily for cleaning of the bucket and finding of the guard. Too tight of a fit makes it a pain to remove. Using these guards in a two bucket method a person can really see the results as I have seen the rinse bucket very dirty and the soap bucket still clean water at the end of the wash

@ForensicDetailing 5 жыл бұрын

i think that tight fit could be the most important thing you could do though, like rollo said in my facebook page. without the tight fit, if that grit guard moves around the fins actually push the dirt all over the place. I think Im gonna look to get some rubber/foam adhesive like the DG uses to brace mine. although Im not sure for me jsut cleaning my car at home its gonna be a huge factor.. like when I go into contact wash the red peril its very very clean anything because I can get so much off with like greenstar or autofoam plus a blast with pressure washer if need be.

@metalpolishshop 5 жыл бұрын

Maybe some rubber wedges (4 or 5) to take up the gap between the grit guard and the bucket sides?

@Sherukka 5 жыл бұрын

I use The Big Red Sponge with ONR and have a Cyclone in the bottom and I think that's a killer-combo for rinseless washes. I never scrub the Sponge against the Cyclone because that is not needed.

@jasonmennie9629 5 жыл бұрын

Great vid as usual, i currently use 1 grit guard in the wash bucket and 2 grit guards + washboard in the rinse bucket (after your recommendation). It works fine for me, but the dirt lock looked most impressive to me on this video, i would assume the original grit guard could sit on top of the dirt lock no problem ?. If thats the case i would probably use a dirt lock at the bottom of my rinse bucket amd original grit guard and washboard on top, get best of both worlds then. Also i will mention that squeezing your mitt or pad before you even put it in the rinse bucket gets rid of about 70% of the dirt (i think you have mentioned this in the past also). Thank you for the great content as usual.

@ForensicDetailing 5 жыл бұрын

I dont think GG will sit well on top of DG. its like the DG is not flat. I agree on a quick squuze out on the mitt or pad before it goes into rinse bucket, you are totally right that gets rid of a shed load of dirt getting into the rinse bucket. mentioned this before I think in my 2 bucket video. but sometimes its like you forget or just generally theres not enough dirt there for it too make too much different. but yer thats a good one I agree.

@jasonmennie9629 5 жыл бұрын

@@ForensicDetailing ummmm, i like the stackable idea, as you said gets you further away from the dirt. So i think i will stick with the original grit guards. (They won overall on this video anyway haha).

@justwayne4785 4 жыл бұрын

TBH i still prefer the one bucket and spray gun method i watched you demonstrate, seems safer than rinsing my wash mitt in a bucket that soon turns dirty.

@Dutch79 5 жыл бұрын

Working the mitt: that's where the optional washboard is for.

@AndreasSchwarzinger 5 жыл бұрын

So, all in all, the best combination would be to stack the Grit Guard on top of the Cyclone Dirttrap!

@markgillson8096 5 жыл бұрын

Multiple mitts, multiple buckets, stacked grit guards in each bucket. How much grit, filth and corruption are you guys subjecting your mitts and wash water to? If you follow a good regimen of removing the dirt and grit with a foam cannon, and pressure washer pre-clean, the only thing really left on the car to remove with the mitt is the grime. One mitt, two buckets, and your choice of grit guard in the wash bucket just in case, and you should be 99.9% free of potential scratching. I let my buckets settle until I have finished drying the car, just to see what dirt did accumulate at the bottom, and there is virtually nothing every time, in each bucket. Tells me the system is working. Have been doing this for several years and my car's finish is perfect still. No need to complicate everything. Great channel. I enjoy your product reviews.

@markusbendi 5 жыл бұрын

im using the chemical guys cyclone grit guard in the bottom of all my 3 wash buckets with the standard grit guard on top of it for exstra protection. I have only the washboard in my rinse bucket and yes they are exspensive but they pretty much last forever as long as you dont try to destroy them and treat them like garbage that is

@suzannecharest2925 5 жыл бұрын

How does the grit guard on top of the cyclone grit guard with the washboard in the rinse bucket seem to be working for you?

@markusbendi 5 жыл бұрын

@@suzannecharest2925 aloooot better than just the normal grit guard so i would recommend using them this way

@thatguythatdoesstuff7448 5 жыл бұрын

The Chem Guy cyclone has the issue of plastic flashing covering the holes on the underside. A flame or heat gun will melt the flashing back and open the holes all uniformly. A better design would be to have the flats on the cyclone guard all rounded upward. That way there are no spots for the grit to land without it just sliding into the little cones.

@givewai 5 жыл бұрын

Great testing. Still, I just use a bucket-less method and probably won't be going back to using buckets.

@a.k1311 5 жыл бұрын

Well thats clear as water!!!

@DanielChaves1984 5 жыл бұрын

So the ideal setup would be to layer it. Put chemical guys on the bottom and put a grit guard on top with it's add-on. Awesome I will try that. :)

@Reptielenfreak 5 жыл бұрын

i use the cyclone dirt trap on top the normal grittguard and a scrubcard on the side.

@Jackieletits 5 жыл бұрын

So what you're saying is I should have a chemicals guys at the bottom and a regular one at the top? Love it mate.

@ForensicDetailing 5 жыл бұрын

you could do yer if you dig the whole filter thing from these products. Ive heard peeps say thats what they use, I think some peeps will laugh though.. you can see the broad spectrum of opinions of the whole grit guard thing in the comments some dont use them, some get a lot of value from them.

@Florishh 5 жыл бұрын

good vid mate, if i was to use gritguards i would indeed put the CG one on the bottem and the other one on top of it, but tbh i stepped away from even using 2 buckets and i tell you why: for my own cars i dont use a pressure washer i just use a garden hose and one of those attatchments that has a showerstance, i use one bucket and i start by doing half of the bonnit with one side of the mitt and then flip it over and do the other half, then i put the mitt on one of the windows and rinse it out thoughourly because it opens up the fibers and the dirt just rinses away so my mitt is clean when i dunk it in the washbucket. for cars at my work i do use a pressure washer but still with one bucket, yes it probaply causes some micromarring but i cant see them with the naked eye, and the reality is the cars that i wash on my work have to be polished anyway so any microscratches that might have been put in will get polished out anyway so i dont really care about it

@83metoo 5 жыл бұрын

Nice test! 👍🏻 Where did you get that transparent bucket? Need one for my test for my German community! 😊

@ForensicDetailing 5 жыл бұрын

hey there, excell detailing supplies in the UK.. nick smeaton ghost bucket its called

@83metoo 5 жыл бұрын

@@ForensicDetailing Thans a lot! :)

@ObsesifAdam 5 жыл бұрын

That's a great review. I've used 2 mitts, 2 bucket and grit guards and also wash the mitts in each panel :) (Gentle washing takes 3 hours for the outback :D :D , my wife impose a quota, so I can't wash my outback weekly :D :D )

@joebrackenborough1051 5 жыл бұрын

Thanks for the vid, I am not sure still. I think I will continue to use the no bucket method and use the hose to rinse my mitt. Or use one soap bucket and rinse before dunk. I think for a bit of plastic they are expensive.

@ForensicDetailing 5 жыл бұрын

cheers joe. price was the reason the GG edged it and won this test. It has to be a factor and I cant ignore it in the video as one is twice the price of the other. This was a close thing actually. so much so if the Turbine one had been a little bit cheaper it would have come out top. this is where it gets hard as a reviewer because to some dudes the difference in price is meaningless and they want the review to just recomend the best performer all round. But I factor in price in my reviews generally and I walked through all the criteria so guys can pick up specific things that are important.

@joebrackenborough1051 5 жыл бұрын

@@ForensicDetailing and that is why we love your vids. For me I spend a lot of money on detailing stuff (wife doesn't go on youtube, phew) so when I buy something that is twice the price it has to be worth the extra dosh lol. If these wasn't patented we would be paying £2 from a Chinese company as we have seen more complicated stuff made in china for next nothing. 🤯

@ForensicDetailing 5 жыл бұрын

takes more than a patent to stop some far east companies wading in. Wouldnt surprise me if there were knock offs of the GG design out there that infringe the patent but who knows. Detail guards as well wouldnt surprise me if the far east just wade in and clone it within 12 months. so difficult to go after them if they do. the CG design I dont thinks been cloned yet. I reckon CG would have the clout to go after them if they tried. The knock off companies also sell to the western companies so if they step to far out of line there are some consequences even if you have no chance of going after them legally...

@joebrackenborough1051 5 жыл бұрын

@@ForensicDetailing although it does stop them, i think no patents you get a lot of competition that drives down the price down like microfiber or sponges so cheap now but if there were patents then they would still be expensive. I think we all know the car detailing game is over priced a little think how much we pay for car shampoo and how much we pay for hair shampoo or washing up liquid, I appreciate the chemistry is different. I am sure if everyone washed their car like us and everyone needed car shampoo the price would be a lot cheaper. Glass cleaner you would never pay £10 for glass cleaner to clean you house windows, I buy £1 stuff and £10 stuff for the car lol.

@benkneisley3001 5 жыл бұрын

A battery powered small pump that attaches to the top of the bucket......a draw straw that sits below the grit guard. Very little suction/gpm flow rate, the draw straw sucks out the spent/dirty water......An outlet port on the pump drips out the spent water.

@zaink7037 5 жыл бұрын

The first and only grit guard I've tried is the chemical guys cyclone. I use it with their white bucket. It sits a bit tight in the bucket and it's a little annoying removing it from the bucket after use as there's no grip. To be honest I think it does work. I can easily see the black dirt after removing the grit guard over the white bucket. Slim's detailing sell a few slightly damaged ones in their store for cheap

@ForensicDetailing 5 жыл бұрын

can be a bit hard getting your fingers into the bigger 4 cones in the middle for sure to get them out.

@CAPTJ696 5 жыл бұрын

Zain K I use a plastic tie to pull it out.

@zaink7037 5 жыл бұрын

@@CAPTJ696 that's a good shout 👍

@jamesbaggaley1460 5 жыл бұрын

Hi John, on the subject of scratch prevention... does your M140 have hard paint? I only ask as a few months back I picked up a new Mini cooper company car and the paint is like butter, breathe on it and it shows up wide hologram swirl marks, even with VERY careful washing, 3 bucket method and applying no pressure at all, and using new/clean microfibers when drying... even patting the surface dry. Only ever applied a coating of Fusso when it was new, I bet buffing off even caused scratching, even with high pile microfibers... driving me insane. Using the Sealey inspection torch at night shows up loads of swirls. (Doesn't help that it's black) Can I expect my new 1 series to be more durable? (Also black)

@ForensicDetailing 5 жыл бұрын

Im pretty sure my 140 has hard paint. Ive not hit it with a heavy compound yet though.. but the paint on regs white 140 was really really hard. the paint on the 135 was nice, it was hard but it was really easy to polish, just nice to work with, I prefer it when the paints rock hard. I have lots of work to do on this 140 its got all sort of marks on it. Im just waiting for like spring, its really too cold to apply the coating now in my garage. it suxs when you have mega soft paint, really does. Ive never ever polished a mini so not sure.. but coatings can help when you have soft paint that your struggling to maintain, obviously doesnt turn it bullet proof but ive suggested them to a fair few guys having wash problems and they were really happy with the improvement after the coating with wash related marring.

@abioqaas 5 жыл бұрын

Little Freudian slip there in the beginning :)

@ForensicDetailing 5 жыл бұрын

doh :)

@arekusu7765 5 жыл бұрын

I use one bucket with the standard grit and 8 washing mitts

@Synthtv1 Жыл бұрын

You could stack a cyclone on the bottom, and on top a classic grit guard, this way dirt wouldn't go up because of cyclone guard, but will go down through classic grit guard,would be interesting to see if this works

@DasArab 5 жыл бұрын

TBH I think tall buckets are the answer. My wash pads never get anywhere the near the bottom of the buckets. And tbh if you dropping "heavy grit" into a wash bucket Id be questioning someones pre wash routine. I never use the TBM either, just two wash pads. Edit: BTW I use the original GG one because I bought it years ago.

@JoakimGulbrandsen 5 жыл бұрын

Good video. Byt the CG cyclone thingy, isnt it supposed to work better when rubbing over tge guard in a circular fashion, making many small cyclones in the guard, pulling the dirt down and under? Would be cool to see a comparison with double guards also. I am using a Cyclone in the bottom and a GritGuard with the mitt accessorie on top now myself.

@ForensicDetailing 5 жыл бұрын

possibly joakim... decent point. short answer is I dont know I didnt test that. gut instinct says hmmm.. but like really dont know.

@jamiefischer5470 5 жыл бұрын

The Detail Guardz Dirt Lock was the only one that had no debris floating about when you were pumping your mitt @6:30, watch how it pushes the water and sand down but nothing up. How did that one lose? :O Just bought one from In2Detailing to replace my current guards

@meoski420ja 5 жыл бұрын

Jamie, how do you like the Detail Guardz Dirt Lock? I just ordered 2 and am excited to try them!

@fiatpunto360 2 жыл бұрын

Can they fit in regular bucket, what are the proprtions of the grit guards

@kevopresto 5 жыл бұрын

Jon do you have a link for the wash buckets you use ( not the clear one) because I've got the turbine grit guard and it just floats in my buckets. Thanks

@stanleyfleire3279 5 жыл бұрын

You got the rubber grips on them? If not, the store you purchased from will give them to you free of charge and should have included them into the shipment. I had the same problem, ordered another one couple days ago and already came with them installed.

@kevopresto 5 жыл бұрын

Stanley Fleire yes I've got them but it still floats

@BlackFlag94 4 жыл бұрын

I rub my wash mitt against the grit guard and squeeze is out before dipping into the wash bucket. For some reason, my wash bucket ends up with more grit in the bottom than my rinse bucket! I'm going to try not rubbing the mitt against the guard next time and see if that helps. Also, did you consider stacking the standard grit guard or the black guard over the chemical guys one?

@BlackFlag94 4 жыл бұрын

Ah... my last point was answered. I commented too soon! Haha