Grizzly Works RC SCX24 V3 LCG Kit Install

Рет қаралды 1,847

Күн бұрын

This is just a video to run through the installation of the Grizzly Works RC V3 LCG Set. You can find the set on my Etsy store www.etsy.com/listing/1613235771.
Chapters
00:00 - Intro/What's Included
02:54 - What's Needed
03:39 - Disassembly
04:14 - Front Tray/Limit Strap
10:00 - Rear Tray
12:17 - Electronics Install
17:15 - Body/Interior Install Info
18:59 - More Setup Info
19:49 - Gladiator/Power Wagon Specific Info
21:48 - Outro

Пікірлер: 32

@bcochener 8 ай бұрын

The limit strap addition was a nice touch. I have drilled that out on trays to do the same so many times. Prints look like great quality, really nice stuff as usual.

@grizzlyworksrc 8 ай бұрын

Thank you!

@REACTIVETERRAINRC 7 ай бұрын

Nice job bro really clean lcg conversion 👍

@grizzlyworksrc 7 ай бұрын

Thank you!

@jimbo4203 8 ай бұрын

I like it for the shock placement options alone , you should watch my free Lcg mods video 😊

@lukefarrow5399 8 ай бұрын

I’m trying to build out a stock SCX24 into a class 1 truck. This looks like a pretty good option for more customization while maintaining the flat skid. Nice work man!

@grizzlyworksrc 8 ай бұрын

Thank you!

@Super1handed_rc 6 ай бұрын

Can’t wait to install mine 🤘🏻🤘🏻🤘🏻

@Super1handed_rc 3 ай бұрын

So on my gladiator the battery stretch was killing me so I kinda half floated my esc off the front of the mount and it’s much better plus little more weight forward

@troypostie1252 8 ай бұрын

Well done sir. Im not much into stock rigs but these parts look very promising. Cant wait to see you in another live. Like the vid style🔥💯

@grizzlyworksrc 8 ай бұрын

Thank you!

@cardboardcrawlersrc8805 8 ай бұрын

Are you making bumpers out of this material now as well ?

@grizzlyworksrc 8 ай бұрын

Not yet. I have to update designs or possibly make new designs to work with the material/printing process.

@hauwkeautogallery 2 ай бұрын

What wheels are you running on your gladiator?

@grizzlyworksrc 2 ай бұрын

They are the cheap Injora 15 hole 6 spoke beadlock with Mazz Designs titanium Double Star rings.

@stevefe8522 8 ай бұрын

How about a rear limiting strap. Helps when going down hill.

@grizzlyworksrc 8 ай бұрын

I actually tested this and it seemed to limit the trucks in other areas. Mainly it would cause the trucks to get high centered a lot. It was actually a pretty big issue when getting to the top of a climb. I found that a decent set of oil filled shocks helped a lot with descending.

@Sunsh1ne532 4 ай бұрын

I just installed this kit on my gladiator only to realize that my battery cable doesn’t reach anymore. Any recommendations on how to make it work?

@grizzlyworksrc 4 ай бұрын

There could be a couple things going on. The V3 has 2 rear tray positions for the rear of the Gladiator or Power Wagon. Check to make sure you have it as far forward as possible. Another possibility is if you have more than one truck, you may not be using the battery that came with the Gladiator. Before Axial went to the Spektrum electronics, the Gladiator battery had longer battery leads than the other trucks. The last thing I can think of is yyou may ahve the components positioned in the wrong orientation. The ESC needs to have the battery input toward the front of the truck and the battery needs to have the + and - leads on the top right side fo the truck. If you go to 12:55 and 16:00 in the video you can see the correct orientation. Please let me know if that helps. If not, message me on either Instagram or Etsy and I'll help work through everything with you.

@arnoldangel3077 2 ай бұрын

Have you heard of any one or have you tried the injora carbon frame

@grizzlyworksrc Ай бұрын

I have one of the injora LCG frame rail sets with the angled skid. I've never tried thier stock replacement though. They feel a little flimsy compared to other chassis sets I've tried. If you're asking about fitment with this LCG set, it won't work. My LCG set only works with stock frame rails.

@damienfournier1157 3 ай бұрын

Unfortunately, you dont send to France...

@kevincasey6876 5 ай бұрын

When will these be available again?

@grizzlyworksrc 5 ай бұрын

I'm about to list more and have more on the way. They should be here this coming week.

@brendankohlheim7372 6 ай бұрын

would this fit the new power wagon.

@grizzlyworksrc 6 ай бұрын

Yes it does. It even clears the interior. There is just some very minor trimming required on the inner fender to have access to all shock mounting options.

@cardboardcrawlersrc8805 8 ай бұрын

Version 3 🤔

@grizzlyworksrc 8 ай бұрын

I had a V2 that was out for maybe 6 months. However, the company that made one of the resins for the mixture I came up with for it changed thier formula and I started having a ton of print and strength issues. Thats actually what started me down the road of testing different material and manufacturing options.

@macharleys72 8 ай бұрын

When will they be back in stock?

@grizzlyworksrc 8 ай бұрын

I'm shooting for early next week.

@jesselanham1923 5 ай бұрын

Kinda wish you could re-do the video. During a lot of the video the process you were explaining wasn't in the field of view of the camera.

@grizzlyworksrc 5 ай бұрын

Thanks for the feedback. Still working on camera awareness. I'll absolutely consider making the video again. Until then, if there is something specific you need help with please message me. I'm more than happy to help.