GROUND BOUNCE

Рет қаралды 17,138

Analog Layout & Design

Күн бұрын

Video explains GROUND and SUPPLY BOUNCE phenomenon. Also working of digital gates is explained.

Пікірлер: 26

@tanluu1944 Жыл бұрын

You have a good skill at taken people through your lecture, the cause and why things happen the way it does in a circuit. Keep up the good work Mr. Thank you.

@analoglayoutdesign2342 Жыл бұрын

Thanks for the feedback

@mehdimehdi9950 4 жыл бұрын

very well explained. Just what I needed! Thank you. Bless you!

@sanjayreddy9035 4 жыл бұрын

I am very interested to watch every videos because of clear explanation

@analoglayoutdesign2342 4 жыл бұрын

Thanks

@user-bz5gh2gh9r 4 жыл бұрын

I cannot agree anymore !!!

@MK-fu3jp 3 жыл бұрын

this guy should be a professor. well done.

@basavarajjyante3215 2 жыл бұрын

Sir your Explanation is very good, understandable by anyone, i request you to do the technical videos more n more.

@analoglayoutdesign2342 2 жыл бұрын

Sure.. will do..

@chetanniradwar3065 3 жыл бұрын

Best video..

@arun65394 4 жыл бұрын

Thanks sir...It was very useful and your explanation is easy to understand with much clarity. i am requesting you to upload more videos sir...

@analoglayoutdesign2342 4 жыл бұрын

sure

@sailakshmi6278 3 ай бұрын

I think 3rd case was wrong only m1. Is on m2 is off bcz vgs less than vt in pmos vgs is 0.9 but vt is 0.6 m2 is off condition

@peehu2011 2 жыл бұрын

please explain mos operating regions again with Vds > vgs-vth perspective. I think in case 1, 2 one Transistor is off and other is saturated, in case 3 both are in linear region. Please clarify.

@analoglayoutdesign2342 2 жыл бұрын

Ok will add a video on only transistor regions of operation during transition in a inverter

@saikrishna1640 4 жыл бұрын

Inductor does not accept the sudden change in current. Where that current goes?

@analoglayoutdesign2342 4 жыл бұрын

Inductor opposes the change. Current will still flow thru the conductor.. it opposes the change by inducing a big voltage...Ldi/dt

@analoglayoutdesign2342 4 жыл бұрын

*inductor not conductor

@ayyappann6860 4 жыл бұрын

Why the voltage is plus 60mv instead of -60mv in ground bounce sir

@analoglayoutdesign2342 4 жыл бұрын

from supply it will subtract..ie .6Omv below[-6Omv] and ..from ground, it will be above..ie. +6OmV

@ayyappann6860 4 жыл бұрын

@@analoglayoutdesign2342 thanks for the quick reply sir

@ayyappann6860 4 жыл бұрын

@@analoglayoutdesign2342 Sir the current is flowing from vdd to gnd due to transition vdd/2, hence we are getting ground bounce due to parasitic inductor which opposes the current flow, what about the supply bounce sir...same reason or any variations are there...