GRS® Ball Vises: MagnaBlock™ vs. MicroBlock®
Рет қаралды 3,162
8 ай бұрынShane Hendren shares why the GRS® MagnaBlock™ and the MicroBlock® are his go-to choices at the bench. The MagnaBlock is exceptional for large and small pieces while the MicroBlock can be used directly on your bench and easily moved out of the way when not in use.
Check out the products featured in this video:
• GRS® MagnaBlock™: tinyurl.com/4dj5w98m
• GRS® MicroBlock®: tinyurl.com/4xn95xa7
Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.
Connect with Rio Online:
Visit Rio's Website:
Subscribe to Our Channel: ow.ly/dAbu309U7eg
Find Rio on Facebook: ow.ly/DpRd309U63Z
Follow Rio on Twitter: ow.ly/wdtU309U6oF
Follow Rio on Instagram: ow.ly/eu5A309U6vM
@CameronMcCreary 8 ай бұрын
I have the GRS Magna vise and had my jaws ground down to 30 mm and it works better for me. I can keep my hands braced on the lower part of the block which gives me more control. Thanks GRS.
@haisamjab 7 ай бұрын
Dear Hendren. I spoke with Sam Alfano and for traditional Chisel and Hammer he told me I should get the heavier vise I can get and he told me about the magnablock. I have two questions. Could I position it on my steady woodworking bench? Doesn't it slide? What do you think about what Alfano suggested me? Finally I see there are not many holes for the pins so what if I'm engraving a small bracket for the furniture that I make, am i still able to hold it or should i buy addons to fit it into the vise? Thank you
@RioGrande1944 4 ай бұрын
Hi there! Thank you for your question! The magnablock is 32.5 lbs. so long as the bench is adequate for this kind of weight it should work. It has a rubber base that reduces the potential to slide, but that also depends on how slick the surface it is placed on is. Sam Alfano is master and I would take his advice. The GRS 520 attachment set item number #118096 can be used with this vise to provide more clamping possibilities.
@MaryPalmeras 5 ай бұрын
Is there jaw movement when it is open position?
@RioGrande1944 4 ай бұрын
Hi there! Thank you for your question! There is no significant movement when the jaws are open.
Infinity Circus
Рет қаралды 7 МЛН
Rockhounding Life
Рет қаралды 676 М.
Sweetgum NYC
Рет қаралды 30 М.
KiKiDo
Рет қаралды 2,9 МЛН
КОПЖАСАРОВЫ БЛОГГЕР
Рет қаралды 135 М.
НУРДАУЛЕТ & АДИЛЕТ
Рет қаралды 201 М.
Carol Janiro
Рет қаралды 25 МЛН