Looking amazing dude!!

Love the frame onto the engine rather than engine into frame 🫡

Very nice build 👌🏼 it’s a great feeling seeing everything come together.

Your are so focused so concentrated into assembling this GS750 perfectly! Amazing!

Finally someone who know how seat and Tank should be positioned on a naked bike build! Nice one!

Super looking bike. Concerned I didn’t see a torque wrench used once though 😮.

simply stunning - great work

Very clean and really shows why we sometimes say less is more

I couldn’t help but smile when you rolled that front wheel between those forks to install it … and then seeing it all together 😍 Looks fantastic! Great job!

Gorgeously gorgeous gorgeous bike love that clean look I was waiting for this final assembly and now can't wait for you to ride it the first time however I got an idea if you wanna see it works I think if you throw a tiny fender on the rear wheel it will look awesome but I love this build anyways and also nobody had to see your face when you turned the power on first time we all heard the joy in your voice instantly Congrats on this beautiful build again.

I just saw a running 1976 GL1000 for sale for peanuts. I smell a café racer project.

A very comprehensive assembly video thanks. Very jealous of your garage and tools,makes mine look shabby. Great stuff will subscribe.

THE BEST AWESOME PERFECT AMAZING WORK.....😁👌👍

Awesome video! I'm putting these same forks on my SV650 now. Those wheels are awesome. Nice bike!

20 years and I never thought to fit the frame to the engine. I am feeling dumb as.

I am completely in awe. Incredible job.

Wow, bike looks great! Love the rims.

That looks sick, very much like a ccm with a single sided swing arm and a hefty four cylinder, great work 👍✊

Just subscribed. Lovely work, minimum of narration (ASMR). Calming, informative, enjoyable. Thank you. I build 1/12 bikes. Yours is terrific!

Excellent work 👌

Great job so far,,looks awesome

Very beautiful looking bike 👍

Bravi bel lavoro complimenti

Very nice

Stunning!!

what a badass build you killed it!!!

So clean, instrument panel is stealth tek😁 hidden battery, you can see the carbs, the rear shock looks good. the offset rim with brakes inside is great, you are good at this.

If i were to chose this over a brand new bike...i would still choose this. Realy nice project

yo this bike looks mad!

Ficou linda! 👍🏼

Nice shop!

Can't wait for see it on the road❤

been watching since day 1, cant wait for the test ride video

Exellent, thanks

Looks great

I love motocycle, nice....good luck and sucses for your konten creator👏👏👍👍👍

👍👍 Beautiful

Hola saludos desde Chile!!! Genial trabajo Y me gustaría saber... ¿En cuanto esta evaluado el trabajo y la Motocicleta con el resultado final? Sigan así Da gusto ver sus trabajos

Nice Custom, so Yeah!

Fantastica!

Damn 😮

looks sweet, just picked up a 99 gsxr750 parts bike so I can pull the front end and swing arm off for my 80 gs750 doubt its gonna come out anywhere as good as this but I'm looking forward to the project it's gonna be.

Sweet

Very cool, try to balance your bike. With a straight touring handle bar you will seat more upright and it´s perfect for hill climp and to feel front and rear tire grip. Beautifull motorcycle😍😍😍

A work of art. Beautiful

Gonna do any motovlogs on this epic machine.

Gravity: **Surprised Pikachu Face** So simple, yet that wouldn't have crossed my mind if I was the one to assemble it. 👍

How do those short intake manifolds perform? Longer would give you more torque from what I understand

Nice build.

Slick, the frame looks skinny in my eyes, but still a beautiful build.

Amaze...

awesome machine you have created, really enjoyed watchin the build, congrats fella

I haven't watched your videos in a long time... I hope you will always be successful in the future

Big enough motor?

Bad AF bro!

i'd suggest you to change up the seat it doesn't sit well with everything.. other than that the bike is just simply fabulous the color and contrast of the wheels are insane same goes for the wiring as whole...damn man you did great

u r amazing..

Crisp 👍🤞👊🏼

Awsome

Sick! 👍👍🎉🎉🎉🎉🤘🏻🤘🏻

Beautifuk build! Inlove the carbed 4 cylinder❤ did u say the forks were powdercoated? I was thinking about serakote?

Looks clean,brutal,pur and sexy😊

Are you worried about heat issues with the reg/rec installed above the engine? Amazing work bro

👍

Nice clean build, did I hear you say: 'points' ! Electronic ignition sourly?

Nice one sir o need help for my gs 650g parts head

Прекрасная работа! Только я не понял, в чём смысл микро крыла на переднем колесе, от чего оно защищает?!

That is Art right there! 😎🤝 And what carbs are those if you don’t mind me asking please

What kind of wheels are those? Looks cool 😎

It's the 10 Crack commandments

So you put a diode going into a "light emitting diode"?

Such a brill classic looking bike , next build gsxr 1100 motor, or k1 gsxr1000,. Then it will go as well as it looks .

El velocimetro donde lo puedo comprar bro?

Gidday from Australia great work mate but i think your front wheel mud guard is to close to the tire if you get a rock stuck could puncture your tire

Hi, I really enjoyed this video, what headlight did you use on this build?, please let me know, I love it, thanks

I wish I knew how to do this. I dont even know here to start

Beautiful work BTW your front tyre is in the wrong direction

I wonder if a Yamaha tracer 700 can converted to a motorcycle like Yamaha tenere?

Hi mate I’m interested in the build can you send me some info on your bits like wiring and digital with this please whatever you’ve got I’m really happy that you’ve got that thank you

Fastis in '76'!

What rims / wheel did you use on this bike ? May i know ? Thanks

Wait does that swing arm just fit perfectly onto the frame or did you have to fab something

Not a single torque loading applied?

friends how much does it cost for 1 GS750 motor

Exhaust?

what kind of battery you use on the bike，the battery size is so small ，i need a same one on my bike，she need a clean shape

Ummm not sure if it's was just in the editing but I hope you packed them bearings better that the video shows.

How much?

Great build!! But if you grease wheel bearings like you greased the neck tube bearings your wheels would fall off!!!😂 smearing grease on a bearing is not sufficient! They need to be packed.. you can do it by hand just watch a video or get a packer that works with a grease gun….

What gauge is that?

bro .i have a advise for u ..why dont u try old ducati 748 exhaust setup...u have to mod it..but it will suite your swingarm too.....i know u have already something on your mind for this...but just saying..

where is battery ?

What cute old analog speedometers. Thank goodness my bike still has them. The bike is beautiful, aesthetically beautiful. I wouldn't have put anything digital at all. That's for today's terrible factory bikes

I don’t understand why professional people don’t use simple zip-lock bags to pack bearings with grease🤔 Easier, less messy & go from bag the position without a drop anywhere except in the bag😉😎

You look freakishly like a guy i deployed with.

If you do not now what it means to "do the ton" you should not be allowed to own a "cafe racer"

20 yrs? It’s still a piece o crap dude.

Hope you didn’t spend a lot of money😂. Looks like a stripped down piece o crap that no sane person would ride on a regular basis😳. Seriously?

You basically put an old cb750 motor on a bike with all new custom parts... That's not a cb750 anymore! It's cool and all but easier to just buy a new motorcycle, lol

Learn to pack a bearing ...watch a tutorial!