Electrical Practical Skills Bending a Crank Set in Steel Conduit (How to Make bubble set or Bridge)

Рет қаралды 125,205

Күн бұрын

Students training aid for bending 20 mm steel (metal) conduit to produce a crank set this is sometimes called a bridge, swan neck or bubble set. Includes a full demonstration on how to produce a crank set (bubble set, swan neck or bridge) using a conduit bending machine. This video was shot live in front of the learners at Tresham college to aid was a practical assessment.
How to bend metal (steel) conduit using a conduit bending machine in order to set over an obstacle.
How to bend rigid metal conduit (RMC)
🔵 How to Bend Steel and PVC Conduit + Cutting and Threading • How to Bend Steel and ...
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Bending conduit to make a bubble set
00:28 - Find the centre of the 600 mm long conduit
00:45 - Kick the conduit
01:03 - 100 mm to 110 mm kick
01:44 - Hooking position
02:04 - Make sure it's straight
02:11 - Bend back the first conduit leg
02:46 - Bend back the second conduit leg
03:03 - Is it parallel
03:30 - Clears the obstacle
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical.
▶️ FACEBOOK / gshelectrical
▶️ INSTAGRAM / brihzmraygdtmjmdb9lunq...
▶️ TWITTER / gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #conduit

Пікірлер: 73

@simonbmr 5 жыл бұрын

Outstanding tutorial as always. I love how camera shy the trainees are :-D I have to say I can't quite fathom why anyone would give a thumbs down???

@GSHElectrical 5 жыл бұрын

Hi. Thanks for commenting and the positive feedback 👍👍👍👍 Gaz

@davidshanahan3693 6 жыл бұрын

Excellent tutorials. When I was at college we would be given a piece of conduit and just left to get on with it.

@GSHElectrical 6 жыл бұрын

Hi thanks for the message. I demonstrate every job my learners have to do it’s great fun. Keep watching and all the best GSH Electrical

@rodneypatrick6893 3 жыл бұрын

A trick : you can watch movies at Kaldrostream. Me and my gf have been using them for watching lots of of movies lately.

@aaronjeffrey3922 3 жыл бұрын

@Rodney Patrick Yup, been watching on kaldroStream for years myself :D

@novarowen2649 3 жыл бұрын

@Rodney Patrick yea, have been watching on kaldrostream for months myself :)

@codynico90 3 жыл бұрын

@Rodney Patrick yup, been watching on kaldroStream for since november myself :)

@FallatioNelson 6 жыл бұрын

I wish I had you as a tutor. Much love.

@GSHElectrical 6 жыл бұрын

+FallatioNelson Thanks for that GSH Electrical

@mattydubz481 7 жыл бұрын

Fantastic Teaching! Keep making these informative videos you are helping to make the electrical trade a great deal stronger!

@GSHElectrical 7 жыл бұрын

+Matty Dubz Hi. Many thanks for the kind words it means a lot GSH Electrical

@rozzer8290 6 жыл бұрын

Great tutorials, very clear

@watsond83 3 жыл бұрын

Nice tutorial, thanks Gaz

@michealproctor8842 7 жыл бұрын

excellent teaching gary

@adeebkhan341 Жыл бұрын

Thanks for a quick guide

@GSHElectrical Жыл бұрын

👍🏻

@michaelchapman4269 5 жыл бұрын

That little shit cracking up at the end....100% would have been me back in the day 😂 great videos only just found your channel!

@GSHElectrical 5 жыл бұрын

Hi. This was one of my early efforts hopefully the product is better now. Thanks for watching and commenting GSH Electrical 👍

@michaelchapman4269 5 жыл бұрын

I did mean the kid not your work!

@msfzindaabadpakistanzindaa102 5 жыл бұрын

Good work brother

@aovideos3268 Жыл бұрын

Brilliant tutorial. I’ve got a job this week which involves a lot of steel tube work. And I’m finding this really interesting. Such a shame the apprentices in the background don’t look interested whatsoever. I’m 23 and completed my apprenticeship. I’m here and it’s 9:30 in the afternoon watching these videos. How sad 😉.

@GSHElectrical Жыл бұрын

Massive thanks and remember hard work has its rewards 🦾

@aovideos3268 Жыл бұрын

@@GSHElectrical I’m here to update you! Everything went well but my only question is. When you’re running long runs of tube and you have obstructions to go around. How do you join the tubes together if they are threaded. Because if I have a bend on the tube where I need to thread it onto another length. That bend flies all over the place hitting things and getting caught. Is there any easier way to do this?

@hjeorrectgcorrectejwkv2928 4 жыл бұрын

I work Singapore electrical.I am Bangladeshi. Thanks for good teaching

@pixedust1689 Жыл бұрын

Great video fellas. Can’t help thinking that this could be shortened. Especially given today’s kids attention spans.

@GSHElectrical Жыл бұрын

Point take 👍🏻

@hjeorrectgcorrectejwkv2928 4 жыл бұрын

Thanks sir

@oakesy91 5 жыл бұрын

Could you show how you would do a measured bubble set over another conduit to get the bubble set centre of the conduit

@Cial 5 жыл бұрын

I would be interested in seeing this too, definitely more conduit videos please gaz

@HarveyKingham 2 жыл бұрын

cheers mate

@anwaranaaz9065 7 ай бұрын

هل ينطبق على مواصير cpvc

@anwaranaaz9065 Жыл бұрын

ياسيدي هل ينطبق هذا الانحناء على cpvc

@bracketzoxmk4671 4 жыл бұрын

You guys dont use conduit hand benders ?

@benquilter113 3 жыл бұрын

Really great thank you! Also, I love the fact the young person in purple was about to explode and had to hide their face XD

@GSHElectrical 3 жыл бұрын

The video was live in a lesson 👍. Thanks for commenting Gaz

@pascalchimbonda7827 2 жыл бұрын

Where do you put your centre line on the conduit in relation to what part of the former so when I make the bend that both sides will end up being equal distance from the crank

@eanan00 8 ай бұрын

Great question did you find out?

@shamshadahmad3623 6 жыл бұрын

Hi sir nice videos I am doing here in Saudi Arabia metro project now I m use the ridgid bender and hydraulic bender with tristand Imc conducting 3/4"and 1"

@garrettchurch604 4 жыл бұрын

Shamshad Ahmad alright man keeping it standard no metric

@drewcausey8441 6 жыл бұрын

Why do the saddle so high above the obstruction? I think it looks much better when there’s a 1/4 gap or less between the two pipes.

@GSHElectrical 6 жыл бұрын

Hi. The awarding body sets out the gap between the conduits as part of the marking criteria. Thanks for watching GSH Electrical

@constructionfreak3158 5 жыл бұрын

Hi there, i am looking for Galvanize & PVC conduit fitters & installers. I need 6 people.

@buckswoodshop7190 4 жыл бұрын

In my day as an apprentice you had to use black enamel and couldnt mark it or you got a clip round the ear galv was easy after that

@GSHElectrical 4 жыл бұрын

Bucks Woodshop I love the old black enamel conduit I was trained on it 👍

@SuperKiller374 6 жыл бұрын

what are the uses of steel Conduit and where would you use it? thanks

@GSHElectrical 6 жыл бұрын

Hi. In industry when a surfaced mounted wiring system is employed. It provides strong mechanical protection and the wiring system can be easily changed or added to. Thanks for the question GSH Electrical

@zwiedzajacy6631 5 жыл бұрын

We have different solutions in most of Europe for example in Poland, Norway, Sweden, Germany

@AnimosityGamers 6 жыл бұрын

From Canada here; Is this pipe all Rigid pipe? Or EMT pipe? We use all EMT pipe here in Canada for like 95% of applications but we just use a hand bender. Only standing bender i've ever used was for 2"+ sizes. Im considering moving to the UK as I have family there, trying to figure out if my hours can be claimed in the UK as I'm red Seal Certified here and wouldn't want to start as a 1st year apprentice again.

@GSHElectrical 6 жыл бұрын

Hi. Depending if your level of qualification and your UK employee you may find you only need a level 3 or a wring regulation course. Thanks again for commenting and watching GSH Electrical

@AnimosityGamers 6 жыл бұрын

GSH Electrical the wire regulation course is just a few day jump start course is it? And the level 3 is an apprentice stage? I’m finding a lot of available courses for electrical as I look into it. Where I am now everything is government regulated so there is on 4 levels of education and they are all taught the same regardless of where you take it.

@GSHElectrical 6 жыл бұрын

Hi. You would normally do a the regs course (which is a level 3). The design courses are level 4 and you could do HNC or HND as well. Thanks Gaz

@philipcarroll4036 5 жыл бұрын

The pipe used is most similar to rigid only its steel(galvanised) as opposed to aluminum in Canada, there is no EMT only steel which is bent by using the bending machine showed in video only!!!

@gazdkw82 5 жыл бұрын

Could you do a video doing a larger bridge rather than a bubble?

@GSHElectrical 5 жыл бұрын

Hi. I think some guys in the US have produced videos you require. I am currently working on AM2 content etc. Thanks as always for watching Gaz 👍

@ThePUTNON 2 жыл бұрын

It’s this technic be working with 25 mm conduit as well ?

@GSHElectrical 2 жыл бұрын

Yes 👍🏻

@ThePUTNON 2 жыл бұрын

What about if i have do longer conduit how would you measure on the table when you say the gap is 10 cm - 11 cm ? And 2 things if you have to make bubble set just little on your left in a long conduit and one side longer than another side how would you measure again? Thank you

@dezire8470 2 жыл бұрын

Can you show us this in plastic!

@stevensmith4449 3 жыл бұрын

A saddle set! A swan neck gets you around a 90 degree bend

@stevejones8665 2 жыл бұрын

The young Lad in the Purple shirt at the end looks bored to tears. 😴😴👍👍

@GSHElectrical 2 жыл бұрын

100%

@kingkeitheius2988 5 жыл бұрын

Always bend your center bend 2nd and make it the sum of your 2 outside bends

@billyairdjnr 3 жыл бұрын

Be better if he taught them how to Mark and measure beginning of bends... Say the set was centre of a piece at 1-2 meters would he measure off the bench? The tube looked uneven... and on site people will notice things like bends not same distance

@msfzindaabadpakistanzindaa102 5 жыл бұрын

I khnow work