Travel Limits-Adjust Chamberlain, LiftMaster/Program Buttons

Рет қаралды 293,702

9 жыл бұрын

How to program the travel limits for, LiftMaster, Chamberlain & Craftsman Garage Door Opener with arrow type program buttons with a black button. Used on newer model openers. Including the battery back up and belt drive units. gsoverheadsystems.com

Пікірлер: 53

@thomasnehren 7 жыл бұрын

Found your video while sitting on top of my Suburban in my garage, trying to figure out what was causing my door not to close. Got it working again a few minutes later. Thanks for the video.

@HTS-sw9xh 8 ай бұрын

Thank you!!!! No manual in the box. This just saved us from more frustration.

@Platoon2611 5 жыл бұрын

My door was going half way down and going back up, then all the way down and back up half way. I reprogrammed from this video and now it works like a charm. Thanks for the sub two minute video to get this fixed.

@TheGmoney11111 4 жыл бұрын

Thank you so much I was helping my neighbor adjust his garage door open up and wasn't familiar with the new electrical adjustment I was used to the old screw Style door adjustment thank you so much for your video really helped us out saved us a lot of time God bless you and thank you

@samueldeschamps8895 Ай бұрын

Great video explained very well!

@jonslater4714 7 жыл бұрын

Thank you -- this video is a great public service. Liftmaster's technical support should look at this and be ashamed. Their own video is not nearly as clear.

@susandegraaf5258 8 жыл бұрын

Gave me the info I was looking for...quick and easy! Thank you

@joebot9309 5 жыл бұрын

what if the door wont stay down?

@impulfuga350gt 8 жыл бұрын

Awesome life saver. Garage door was in the Fritz, this saved me.

@DavidVanderburgh 2 жыл бұрын

Thanks for the video. Saved a lot of bucks working on this myself.

@davemdks 3 жыл бұрын

Thanks! The procedure worked exactly as you explained so well!

@white89gt 6 жыл бұрын

THANK YOU!!!! This helped me out a lot!

@troyjimerson6400 5 жыл бұрын

Thank you, you saved me money and a call to the local handyman.

@MucaroBoricua 4 жыл бұрын

Thank you! It worked like a charm.

@DankDaHerbalist 4 жыл бұрын

House walks today on my jobsite this video saved me u rock

@bcast2380 8 жыл бұрын

My down limit would record a little further than I wanted and close too hard. By setting the limit a little early, with just a little light sunlight peeking underneath, the overlap is just right. No more thud at closing! Thanks so much for the tutorial.

@youtube.comactivate520 6 жыл бұрын

Thanks for your help I got it working perfectly

@flying911 Жыл бұрын

Great, easy-to-follow video!

@kekedoll 4 жыл бұрын

Awesome! Fixed my problem. Thanks a bunch.

@alant5757 5 жыл бұрын

Yes... THANK YOU. Simple explanation

@lifesbeengood14 7 жыл бұрын

Dude, this saved me some cheddar, thanks!!

@AL-vx6lx 7 жыл бұрын

very direct and covered exactly what I wanted to know! Thank you for saving me time and $$

@123bwhite 5 ай бұрын

Thank you for the video, very helpful!

@arashshariatpanahi2996 3 жыл бұрын

It worked like a charm

@squarewave808 5 жыл бұрын

Very helpful, thanks.

@QuintonTV 4 жыл бұрын

Very informative, thanks.

@mattmccaffrey5378 11 ай бұрын

Awesome, thanks for the Intel!

@davemdks 3 жыл бұрын

Note (per Chamberlain instructions): After you do ANY adjustments, the safety reversal system MUST be tested. With the door fully open, place a one-inch board (or a 2x4 laid flat) on the floor, centered under the garage door. Operate the door in the down direction. The door must reverse when striking the obstruction.

@cwal_21 4 ай бұрын

Thanks for this 🙏

@ddcbr7206 8 жыл бұрын

thx for video !!

@minhvinh6880 3 жыл бұрын

Very helpful 👍👍

@burbontom5720 4 жыл бұрын

You da man! Thanks!

@Redarius80 8 жыл бұрын

Awesome video bro and you kinda sound like Kermit the frog. Love you man.

@1SouthernShaker 3 жыл бұрын

That will work!

@adanpadilla4200 5 жыл бұрын

I do all the steps but when I press the down button to finish the programming my garage motor clicks twice like an error and it doesn't finish the process

@terryroach8707 2 жыл бұрын

THANK YOU!!!!

@aaasssppp123 5 жыл бұрын

but how do you fine tune it? there re is delay between the time down button is released to when the door stops moving. Its hard to time it right and it seems like the door opening is crushing my garage door!

@MamboCurto 5 жыл бұрын

How can I adjust the speed (force) of the Chamberlain Garage Door Opener? The opener is about 2 years old, but the speed on the door seems to have slowed a bit, and I would like to increase the speed. Thank You

@keithwoolley8448 5 ай бұрын

Thanks

@harvickfan1121 2 ай бұрын

Thank you! The instructions that came with my Chamberlain door opener does not even mention the final steps, The instructions stop with once the door reaches the desired closed position press and release the adjustment button. I hate it when instructions are not complete.

@BrandonMitchell84 Жыл бұрын

Mine just goes 1/4 down when pressing down on the adjustment .. I have tried it a dozen times

@victorymtc 7 жыл бұрын

HELP! I did just what you said. After I got the door to the bottom, closed desired position, the LIGHT BLINKED 5 times! Directions says this means I took TO LONG ot finish! I tried this 6 times and fast much faster than you and does NOT give me the up arrow to see if it works. It blinks FIVE time. IF I HIT my remote the door is already down and JAMS VERY hard and starts to BEND the rail that holds my belt!

@technology_pro 7 жыл бұрын

Same problem here

@technology_pro 7 жыл бұрын

I just went out and messed with it som more and got it to work.. Started with the garage door up programmed the up limit hit select then went to program the down limit but only let the door down 3 inches and hit select. It still didnt take me the the next step that test the up and down limit but it worked.. Definitly a flaw in design

@mr.carolina9887 7 жыл бұрын

Hi I'm having trouble on the 4th and last step. When I hit the down button, the door travels about a foot and stops. Down arrow button blinks several times. I've tried several times. Can you help?

@lukeschrader9072 6 жыл бұрын

Mr. Carolina I am also stuck at this point. I haven't found anything yet.

@kodyhouser7431 5 жыл бұрын

I’m here too any one find anything?

@lukeschrader9072 5 жыл бұрын

Kody Houser Reprogramming was not the issue for me either. What I concluded was that since the garage door WOULD close while I was reprogramming but not immediately thereafter, my problem was purely a mechanical one. So, my fix was in adjusting the metal tracks. I loosened all the bolts that keep the tracks fastened to the wall, and I used a mallet to pound the tracks further apart, but only a by small distance. Watch this video starting at 2:30 for information on that. You can eyeball the alignment of where the track needs to be by comparing it to the edge of the garage door frame. After straightening the tracks, I had no further problems with the travel of my garage door. Hope this helps!