Gun Cleaning Cables vs Gun Cleaning Rods

Рет қаралды 46,585

Күн бұрын

Have you ever wondered if you should be using cables, or rods, when cleaning your firearm? There are many different benefits to choosing what your firearm cleaning method should be, based on your needs and preferences. Figuring out what method to use can prove to be difficult, which is why Otis Technology is here to help.
Matt Ferland and Greg Essenlohr are here to answer your burning questions on the different techniques and materials used to clean your firearms when using cables, or rods. Learn the pros and cons of using both methods, what the Breech-to-Muzzle® cleaning system is, and learn which technique works best for you and your firearm. Stick around to learn different examples of using both cables, and rods, in your firearm cleaning.
Which do you prefer to clean your firearm, cables, or rods? Let us know in the comments below.
►VIDEO CHAPTERS
Intro: 0:00
Solid Rods: 0:49
Using Patches with Solid Rods: 1:46
Cons of Using Rods: 4:52
Different Types of Rods: 6:15
Breech-to-Muzzle® Cleaning: 7:17
Cont. Cons of Rods: 8:22
Pros of Cables: 9:28
Demonstration of Cable and Rod Use: 9:36
Examples of Using Cables and Rods: 12:00
Pros of Using a Rod: 13:52
Thread Size for Rods: 16:30
Final Thoughts and Opinions: 18:29
Outro: 21:30
►ABOUT OTIS
Otis Technology was born in 1985 when our founder, a 16-year-old Doreen Garrett, fell into cold mud while deer hunting with her father. The barrel of her grandfather’s Model 94 Winchester was full of mud and the day's hunt was over.
That day sparked the beginning of an endeavor to create a smarter solution to a problem every hunter, soldier, shooter, and firearm owner has encountered. On that day, Doreen had a vision for innovating gun care. That is where we began, in the mud, pulled down by our roots to reveal a tireless drive to create a quality product that will serve the men and women that depend on their firearms to feed their families and protect our country. Now, it is our uncompromising purpose and the big picture reason why we show up to work every day.
At Otis, our mission is to rethink and redefine gun care, giving gun owners better and smarter ways to keep their most cherished firearms in the best condition possible. That’s why our products are American-made and backed by a No-Nonsense Guarantee.
We are #AmericasGunCare.
►CHECK US OUT!
Facebook: / otistechnology
Instagram: otistechnology
KZfaq: / otistechnology
Website: otistec.com/
Full30: www.full30.com/channel/otiste...
Subscribe today: kzfaq.info...
►PRODUCTS MENTIONED
Otis 3 Gun Ripcord Trio: otistec.com/3-gun-ripcord-tri...
Otis Ripcord 10 Pack: otistec.com/ripcord-multi-cal...
Otis Microfiber Gun Cloth: otistec.com/microfiber-gun-cl...
Otis AP Brush: otistec.com/3-pack-ap-brushes...
Otis 085 CLP Wipes: otistec.com/o85-clp-wipes-can...
Shooter’s Choice FP-10 Lubricant Elite®: shooters-choice.com/fp-10-lub...
Shooter’s Choice MC-7 Bore Cleaner and Conditioner®: shooters-choice.com/mc-7-bore...
Song ID: MB01DK0AJMSLMH9

Пікірлер: 65

@__-pl3jg 22 күн бұрын

I was cleaning out and consolidating my old cleaning kit today. I decided to order one of these little Otis kits. I'm looking forward to trying it out later. I also want to make an even smaller kit that fits inside the grip of my M4.

@johntheobald4722 2 жыл бұрын

Sometimes the firearm dictates. My .22 pump actions are both made before 1970 and the chamber is small and a rod is all I can use. Was introduced to Otis 12 years ago in the military and the kit I was issued had both a coated sectional rod and cables. Still use it today. Thanks Otis.

@ericstanford7670 8 ай бұрын

As a new gun owner of a mp shield plus 9mm this video really helped me a lot. I’ve been trying to decide on my first cleaning kilt and chemicals but I have all the options very overwhelming. Thank you for the video!!

@MKATT525 Жыл бұрын

Cool concept. Definitely want one. 20 minute video, wish they would have showed it in action.

@darrellh1840 2 жыл бұрын

IIRC, the first breech loading military rifles used pull thru cleaning kits. When the metal jointed cleaning rods were developed, it was the intent for the soldiers to insert the rod into the barrel and attach the slotted tip or brush and clean from breech to muzzle. The soldiers quickly learned that was too much trouble…. I have used OTIS system for a long time on everything except the firearms I can clean from the breech with a rod…. Great gear you guys make!!!

@TheUncleRuckus 2 жыл бұрын

While I prefer to use the rod for cleaning my rifles I always keep a compact cable cleaning kit in my bag for whenever I'm out in the field. Only bc I'd rather have it and not need it than, need it and not have it.

@n.u.t.y. Жыл бұрын

Same. I use cables in the field, and have rods at the bench. The rods can be used for clearing obstructions, etc in the worst case. The rods are also necessary if you are using a chamber brush that you should not pull all the way through.

@jaydunbar7538 2 жыл бұрын

I use bore snakes, cables, and rods depending on my mood

@nelsonm5032 6 ай бұрын

interesting video. as a bench shooter i run a ripcord through at the range, then i only clean the chamber at home using a rod and patches to get the carbon ring. then down the road using a bore scope will determine if a more thorough cleaning is needed of the barrel. cheers

@stevecole6485 Жыл бұрын

Interesting choice of footage for a nearly half hour video. Every time he mentions something the cable is so great at… I’m thinking of why couldn’t a rod do the same thing as well or even better? Who knows, he never shows how good it works, just says it does, but NOW we offer both. hmm…

@ytuploads9742 Жыл бұрын

It'd be helpful to demonstrate how the product works. For example, id like to clean from breech to muzzle, and prefer a rod, but don't know if your rod is push or pull. I'd like a pull method with a rod, yet I don't know if your product can do that. Otherwise, thanks for the video.

@brianrussi4328 2 ай бұрын

I’d say the most benefit that using a rod over a cable is being able to clear an obstruction in the barrel.

@artbrownsr Жыл бұрын

I use the rod for intensive cleaning, and the pull through for the quick clean. In 4 calibers. 22, .30, 9mm, 12 gauge. I know 30 call. Will fit 9 mm but my 9mm is pistol and the. 30 is a rifle.

@misahayase8854 9 ай бұрын

When they came out with boresnake or the cable where that has the attachment at the end for a jag or brush and pull through / pull out, kinda game changer vs plain old boresnakes . . . my SA revolvers love it that I can brush out in the direction of the bullet, or and to brush the lever action bore, I don't have to take apart my lever action, so I can hot rod it . . . just use the cable with brush on it . . . I kinda LOL at some of the gun range myth guys or AR forum where they say "micronized diamonds" from carbon residue (heat and pressure, what diya think a bullet and powder does?) form and subsequent boresnaking "puts all 'em micro diamonds, hardest mat on earth, scratching up that barrel".

@fredkeisling5014 6 ай бұрын

, 12:49

@Psalm-yg6yi 4 ай бұрын

Five minute video packed into twenty-two minutes and forty- nine seconds. 😂

@paullavallee1631 11 ай бұрын

Pulling through a bore snake is like ramming 500 patches through your bore in one pass, bore snake is the better choice for a spotless barrel with no wear.

@Physics072 Жыл бұрын

Aluminum rods are not going to damage steel old wives tale. And they are not full of oxidation either. The last thing you run through is a oiled patch preventing oxidation that is not there to begin with. Aluminum is just weak and easier to bend or break.

@onpsxmember 9 ай бұрын

Any aluminum exposed to oxygen forms a layer of Al2O3. As soon as you scratch it forms a new layer. BUT, that layer is not as hard as one formed by anodizing. It depends.

@sindeecharlton8857 4 ай бұрын

Rods are hard to use on a lever gun

@monarchpixels 6 ай бұрын

I have a 17hmr, the patches are to small to put on like you demonstrated, could I use a 22 patch without having to struggle pulling through barrel?

@OtisTechnology 5 ай бұрын

We only offer 2 sizes for small caliber cleaning. 2" round patches for pull-through cleaning and 1" square for use with jags and they can be used with .17 pierce point jags.

@Dmounts Жыл бұрын

What if you run the rod in a pulling motion to accomplish that same pull on the patch? How much of a difference do you think a brass rod w/ bore guide makes opposed to a snake? I’m a new shooter so I’m trying to learn all I can. The gun community is filled with a mix of myths and facts and it’s tough for me to separate the two when talking to your average joe.

@OtisTechnology Жыл бұрын

The pull through cable system works great to pull through the ejection port of most firearms without disassembly. It would be difficult or impossible to tie an Otis patch on a rod inside the breech/ejection port area of the firearm to pull it through from breech to muzzle. Rod cleaning is typically done in a indoor setting at a bench and it isn't as portable as the Otis Cleaning Kits or Ripcord pull-through bore cleaner. They all have their place; in the field, at the gun range or the gun bench.

@s3ntin3l60 2 жыл бұрын

I tried a rod once....got a cable and never went back...Otis by the way.

@IsaacKim Жыл бұрын

i have a AR9 PCC. 8.3" barrel. what would u recommend.. too much chit chatting.

@RocksNRuts4 4 ай бұрын

its ok to run a jag or brush back n forth? but better to run breech to mzzl? smooth n rifled bores.....

@OtisTechnology 4 ай бұрын

We exclusively recommend and teach Breech-to-Muzzle® gun cleaning. It's the proper way to clean firearms.

@DansFitnessAndHealth Жыл бұрын

is the Otis cable coated or covered with something softer than steel?

@OtisTechnology Жыл бұрын

Yes, the Memory Flex cable is coated.

@michaelbarfield528 Жыл бұрын

Been using Otis since 1998 because of the cable due to the cable's flexibility......

@bait_caster_kam2936 Жыл бұрын

Is it better than ratchet rods scrapping the bore ?

@michaelshanahan4965 Жыл бұрын

Don’t use jags, why? Hook through the cable end and pull.

@qawsqaws5284 Жыл бұрын

I prefer rod for handgun and cable for long gun. I tried to use three pieces rod to clean a rifle. One clean later the join between rods got loose and broke. Cable don’t have that issue

@OtisTechnology Жыл бұрын

Thanks for the comment - We also offer 36" solid rod from Otis now

@ArkansasBadBoy Жыл бұрын

@@OtisTechnology Do you offer that 36 inch rod in a small enough diameter to accommodate the .17 bore ?

@OtisTechnology Жыл бұрын

@@ArkansasBadBoy Not currently; our smallest diameter cleaning rod is .22

@OtisTechnology Жыл бұрын

..and it is on the list for the new product team. Thank you!

@teddyfromtexas3945 2 жыл бұрын

Is it possible to damage crown of ar 15 using Otis cable patch and brass jag?

@OtisTechnology 2 жыл бұрын

No, Otis components are made from brass which is softer than steel. Our Memory Flex Cables are coated as to not damage the crown

@teddyfromtexas3945 2 жыл бұрын

What about damage to crown of the rifle , everyone says it’s easy to damage crown with Otis . I use the Otis cable so talk me off the ledge please

@OtisTechnology 2 жыл бұрын

Otis components will not damage your crown.

@Physics072 Жыл бұрын

"everyone says it’s easy to damage crown with Otis" just the fact that you said "everyone" you know its a false statement. I've never said that so obviously you were being a bit dramatic saying "everyone"

@teddyfromtexas3945 Жыл бұрын

@@Physics072 the first test in every narcissistic exam is how do ppl respond to a blanket “everyone “ statement .

@cliffcox7643 Жыл бұрын

I heard NOT to use rubber coated rods cause the pick up metal particles in the rubber and can damage the barrel.. True?

@OtisTechnology Жыл бұрын

The coating on Otis Memory Flex cables is nylon and no, there is not a risk of any metal particles being picked up by the coating. Whatever cleaning method you use; your patch or brush would pull any debris out of the barrel pressing into your lands and grooves; while your cable rarely contacts the bore itself . If you do have visible metal particles in your barrel you may want to have it inspected by a gunsmith.

@cliffcox7643 Жыл бұрын

@@OtisTechnology So, may I ask, on a .22, they don't get copper fouling, do you Jag, and brush and swab?

@OtisTechnology Жыл бұрын

@@cliffcox7643 .22 tend to shoot very dirty with a lot of fouling. if you're using our pull-through method with the Memory Flex cable you wouldn't use a jag; you would use a slotted tip with a patch with CLP, then a brush; and finish with a dry patch on a slotted tip. If you're using a sectional rod or a solid cleaning rod with jag and patch with CLP, then brush, then dry patch. For both methods repeat until clean. Always clean breech-to-muzzle.

@garrytalley8009 Жыл бұрын

Very disappointed in the video. You can use either a square or a round patch in either system. One can put a hole in the middle of either patch using the Otis System. I use round patches primarily with jags with rods. Again you can use either patch square or round. Lots of wind no substance. I have AR's and use the Otis System but use bolts mostly and use rods. You are not going to scrub the bore with the Otis System like you can with a rod and bore brush. You would have done better with a show and tell but your bench talk was honestly nonsubstance.

@michaelshanahan4965 Жыл бұрын

If it’s not a bolt action then cable period.

@michael5619 2 ай бұрын

Just hate the idea of "proprietary patches" and sizes, could just as well be wrapped on a mop head.

@OtisTechnology 2 ай бұрын

Wrapping a mop or brush won’t work for a pull through cleaning method. The tied patches work great. Once you get the hang of it they are a game changer. We do offer rod cleaning jags and square patches for those who prefer traditional cleaning methods.

@michael5619 2 ай бұрын

@OtisTechnology not the only system to do so, just my two cents on things that should cost two cents to make and just as effective I suppose.

@emanennis8992 Жыл бұрын

He won't say what was a sorry cleaning kit he's probably referring to outers

@davidblinn9635 2 жыл бұрын

In my day we didn’t have cable’s in the Marine’s !!!!!!

@kimber3865 2 жыл бұрын

back in your day you didn't have a lot of things. so does that mean you're going to continue being outdated?

@davidblinn9635 2 жыл бұрын

@@kimber3865 I do fine my weapons are clean & work well!!!!

@bills6946 10 ай бұрын

If you ever had a bore snake break in the barrel, and get stuck, you were instantly converted to a cleaning rod guy. Don’t ask me how I know.

@OtisTechnology 10 ай бұрын

Unlike the product you mentioned our Ripcord has a cable core with a 400lb pull strength; very unlikely to break, even under extreme intentional stress.

@nhbountyhunter 5 ай бұрын

Been using only bore snakes for 25+ years and never broke one. Also, if it was hard to pull I stopped. Lastly, inspect your tools prior to use. If they are faulty don't use them.

@deltadawgz6865 Жыл бұрын

Talk too much! Too long video to watch. These guys need to get to the point.too much chitchatting

@whiskeykilmer1866 2 ай бұрын

Stupid info-mercial

@user-jn6ld7it6e 15 күн бұрын

Talk way to much

@claytidwell 11 ай бұрын

Not to be argumentative, but I own a Marlin 30-30 Lever action and a Remington Model 700 30-06 bolt action. Cleaning breach to muzzle on both, are very easy with a rod. The bolts come right out leaving the clear passage for cleaning. There is, however, the extra few inches of travel, so an extra rod may be necessary. But still, NO issues.

@OtisTechnology 11 ай бұрын

You're correct. We have a video on lever action cleaning coming out this month. For cleaning the bore without disassembly we maintain that a Memory Flex Cable is the way to go.