I'm a beginner and still have a lot to learn. I couldn't take a carving class because my finances were bad. I am very happy with the inj video version. first and different from all the sculpting videos I've seen. I hope the next video will stay like this version. Thank you
@voightengraving Жыл бұрын
Thank you for your feedback. I will be making more videos like this. Subscribe so you can be the first to know when they are released.
@mulanjamilah7849 Жыл бұрын
@@voightengraving I have subscribed to your channel and activated all notifications on your channel. as in your video there are many obstacles as a beginner. and every country is different too. where in my place it is very difficult to get a graver that fits the pneumatic collet. very rare balls. to buy sharpening handles from Lindsay alone we have to think again because the taxes are so high. and how do we overcome all of that? we do with "D.I.Y". different location other solution. with your video version it opened my mind how from beginner to professional. thank you for sharing your experience.
@mulanjamilah7849 Жыл бұрын
@@voightengraving maybe you will wonder how I got my pneumatic handle from Turkey 😀😀. even I still can't believe it until now. What is clear is that there is no way I could pay for all of that but God provided an unexpected way.
@voightengraving Жыл бұрын
I understand. The tools are very important but we must always remember that the great masters of the past didn’t have what we have. I hope my videos will continue to help you along. Thanks for your support!
@mulanjamilah7849 Жыл бұрын
@@voightengraving I really like Video cutting process. I don't have a microscope yet. how many times magnification glass is suitable for engraving? thank
@anthonyalamonti44 Жыл бұрын
This is just incredible . I haven't started this process yet but wow what a way to make some incredible handles I mean the possibilities are endless with what this skill would do for ones artistic creations . Thank you sir for getting these old juices flowing once again.
@voightengraving Жыл бұрын
Hand engraving is such a fun challenge. I hope you find the time to begin. Good luck!
@shantkevorkian889 Жыл бұрын
Legend in one word thank you for sharing these informations
@voightengraving Жыл бұрын
My pleasure!
@jamesperkins983311 ай бұрын
I just took an introductory stone setting course at GRS this last week. Hoping to incorporate it into my Knife Making and engraving. Also, I enjoy watching you work!
@voightengraving11 ай бұрын
That's great! I wish I had the time for a stone setting class.
@robertoakley9609 Жыл бұрын
When I first took up the craft I too was self taught and at first clueless, but, once I learned how to sharpen properly and got a scroll master kit for layouts I went from novias to master in about one month, just kidding, graving is a controlled mistake start to finish. The better you get the harder it is to see the mistakes.
@voightengraving Жыл бұрын
Sharpening was my downfall at first. I just didn’t even understand the importance and function of the heel.
@Gojirafistful Жыл бұрын
Thank you for uploading this, I’m glad you mentioned your process and how long it’s taken, this is motivating. I just started and I’m finding it difficult to see my work while engraving. Is investing in a affordable microscope crucial ? I’m also not able to transfer properly using a brother laser ink printer with acetone / varnish with transparency paper/regular paper. Wondering if you ran into this problem.
@voightengraving Жыл бұрын
Thank you for your comment. I do recommend spending as much as you can afford on a good microscope. It will help greatly. I’m very happy you mentioned transfers. I will post a video soon on the method I use to transfer. It’s the best method I’ve found so far.
@Gojirafistful Жыл бұрын
@@voightengraving thank you, I’ve subscribed and look forward to it
@topkephas5608 Жыл бұрын
I have been interested in doing this for quite some time but wasn't sure how to get started, I find myself wanting to get into things and buying some equipment just to end up finding out I need a lot more equipment that I wasn't prepared to purchase. Any tips for someone who just wants to practice on small pieces, I am curious how much I might need to spend and which tools are a must.
@voightengraving Жыл бұрын
Thanks for commenting. The most important piece of advice I received when I started is to take the time to learn to draw scrolls perfectly. This way you learn one of the most important things about engraving before ever investing in expensive equipment. If you find that you really want to take the next step then I recommend finding a class or a teacher before you buy. This way you can try engraving before you spend a lot of money. To start I invested close to $4,000 including a 5 day class.
@pottiBoo8 ай бұрын
Hi Justin, thank for you Videos, they are very helpful :) What is the grey stuff you are using to fix the engraving piece?
@voightengraving8 ай бұрын
It’s called Thermoloc. Its a thermoplastic the softens when heated and becomes hard when it cools. It’s available through GRS and Amazon.
@voightengraving8 ай бұрын
Thanks for watching my videos!
@dieterlenaers2008 Жыл бұрын
Hello, At what angle you charp The heal? 15*?
@voightengraving Жыл бұрын
Yes it’s 15 degrees
@raymondmirabal58796 ай бұрын
What set up and hand piece are you using spring or no spring?
@voightengraving6 ай бұрын
I use a Lindsay Classic. It’s pneumatic. I tried most of them and it’s my favorite so far.
@donrodgers4018 Жыл бұрын
I’m anEngraver in OKC, would you be interested I meeting up sometime? 8:00
@voightengraving Жыл бұрын
Thanks for contacting me. I’ll look forward to meeting you.