The Physics of GriGri | When does No-Hands Belay Fail?
Рет қаралды 943,585
Күн бұрынPhysics and Experiments demonstrating GriGri slipping in No-Hands Belay.
Head to brilliant.org/hardiseasy to get a 30-day free trial + the first 200 people will get 20% off their annual subscription.
Thank you Brilliant for stimulating our scientific thinking.
▀▀▀
00:00 Introduction
01:54 Physics
07:11 Experiments
14:31 Comparing Tests with Real World
16:03 New vs Old GriGri
▀▀▀
A huge thank you to those who helped me to understand this topic:
Prof. Pietro Meschini
Prof. Rainer Schad
Richard Delaney - www.ropelab.com.au/files/phys...
All Instagram people answering my random physics questions.
▀▀▀
And also If you are getting value out of my videos and wanna feel good - consider supporting me: hardiseasy.com
Because that makes a big difference and is the main reason that allows me do this project!
Deep Thanks!
Ben
@engineeringMemellionaire Жыл бұрын
a small correction to the physics here - there is a difference between static and dynamic mu, because friction is higher when two surfaces are not in motion relative to each other. Dynamic coefficient of friction is not equal to static coefficient of friction, so as soon as a rope starts to move through a gri gri , the friction is slightly less than when it is fully arrested.
@HardIsEasy Жыл бұрын
Yes dynamic friction is usually lower than static, but in the formula I used what's been tested by experiments. You can find more info here: www.ropelab.com.au/files/physics.pdf Page 86
@Doctor_Yuri Жыл бұрын
Its not a meaningful difference as both cases show the same relation between the tension applied and the torque created across the device. If either µs or µk give the same relation, then its normal to drop the case outside of numerical analysis or further relations into a dynamic system.
@xxrgxxcasco Жыл бұрын
this might make a great difference if there is slack on the rope from the grigri to the climber, in a way that by the time there is force on the rope at the grigri, there is a considerable speed, and since you use the larger coefficient, the grigri is supposed to engage easier.
@Doctor_Yuri Жыл бұрын
@@xxrgxxcasco Yeah but thats using dynamics at that point, and the entire presumption of this analysis is using statics. It would overcomplicate the model and at the end of it all it could simply be replaced by some coefficient (lets assume phi) to be placed alongside the tension relationship. Still doesn't change the overall model, only numerically. By the way, I am a physicist (but work as an engineer), though I try to not be presumptuous.
@xxrgxxcasco Жыл бұрын
@@Doctor_Yuri No need to explain yourself as a physicist, you certainly write the part leaving physicist trails. I agree with you entirely.
@jellekolenbrander9156 Жыл бұрын
As a Dutch climbing instructor I am going to show this to every new lead climber that follows my course. Thanks for the in depth information!
@HardIsEasy Жыл бұрын
Hey thank you so much!
@daan_me Жыл бұрын
The quality of this video is so insanely high, both in production as content. Keep it up man!
@YannCamusBlissClimbing Жыл бұрын
+1 . Probably my favorite grigri video of all time!! Thanks Ben! Can't wait for the next one with other belay devices 🙂
@skip1860 10 ай бұрын
F anyone that uses Content to describe a fucking video
@timwildauer5063 Жыл бұрын
It’s vitally important for the entire community that we learn all the possible modes of failure. If we know when and how they fail, we can put proper safety checks in place that will ensure these failures never happen. Thank you for working hard to make sure we all stay safe!
@henrypowell1402 Жыл бұрын
I work as a Climbing Instructor and every time someone asks why I advise them not to hold the climber side and the brake side of the rope parallel above the grigri I wish I could sit them down to watch this video, so many of your videos explain things that people don't usually have the time to explain, teach or read into. A great service to the climbing community❤
@TheWayThePath 9 ай бұрын
The gym i sometimes climb at have floor anchors attached to the top rope and grigri. They are anchored low and there is literally no way to belay the proper way ( unless you are kneeling down) They advise and continue to advise parallel rope method that you mentioned. As far as I know thay have been operating like this for years with no incidents. I’ve been trying to find out more info on this topic. Seems like the grigri will hold when held parallel( tension on the brake end or course)
@Gecko2601 2 ай бұрын
@@TheWayThePath Did you find out more about that?
@lazycat5108 Жыл бұрын
The best GriGri video ever. Definitely broke my misconceptions, I too thought that probability of locking goes up with the force on the climber's side of the rope. Thanks for doing this work, you rock!
@andrewhunter6536 Жыл бұрын
I think it technically does since there is a term he neglects in the theory which is the extra tension on the brake side from the force needed to accelerate the rope. F=ma so if it free fall is assumed (big simplification I know) and the hanging rope weight is 80g then it’s about 0.8 newton
@jonnes__4657 Жыл бұрын
So many climbers are often in danger, and they even don't know it. .
@PS2Reviewer Жыл бұрын
This is more in depth and well made than my thesis.
@roboterson Жыл бұрын
Love the safetey crocs you are wearing while doing the weight testing. Stay safe!
@HardIsEasy Жыл бұрын
Proper gear is important in lab env
@drstrangelove85 Жыл бұрын
My girlfriend after 10 minutes of the video, shaking her head: just hold the stupid dead end of the rope.
@n085fs Күн бұрын
A Blake's Hitch can be put on the tail end to ensure the climber does not fall to the ground even if the climber becomes unconscious.
@NoclockMinecraft Жыл бұрын
Glad you wore your crocs in safety mode while dropping weights on a crashpad ! Great video as always, thanks for doing the work of putting the theory to the test of reality !
@HardIsEasy Жыл бұрын
Yea safety equipment is important:)
@adventureawaits6923 Жыл бұрын
Thank you for making this video series, keeping people safer with more knowledge about gear is a pretty awesome thing to do, keep on keepin on!
@vinceburris2538 Жыл бұрын
Glad to see a new video from you. I like your teaching style.
@mastheadmike Жыл бұрын
This video is so helpful beyond the scope of the grigri - your curiosity ended up illustrating real world examples of physics and engineering so beautifully. I hope it encourages kids to study them with more interest. Well done.
@scottnon9779 Жыл бұрын
Really excited to watch the video, i feel like there are so many misconceptions about the grigri and its safety in a hands free scenario!
@brianthrom6858 Жыл бұрын
@10:10 the rope starts slipping through with sufficient enough velocity that you’re getting a sort of inverse chain fountain where the momentum of the moving rope is throwing the rope above its defined pivot point leading to the rope settling into the ideal position to continue slipping. That fall could have been indefinite Edit: time stamp correction
@jeldrikhartmann531 Жыл бұрын
Did you watch that video by Steve Mould on this? Noticed that too
@brianthrom6858 Жыл бұрын
@@jeldrikhartmann531 100% where I first saw the phenomenon
@avichi2 Жыл бұрын
as a mechanical engineer and aclimber i would to say, very good job ! showing forces and moments in a clear and accurate way. starting from first princibles and working your way up to theory and expirament. very impressive
@jorgesc8234 Жыл бұрын
Bro! This is dope! I'm a physicist and you communicate exponentially better than lots of physicists themselves. Keep climbing and keep learning! Love your videos!
@colasdavid953 Жыл бұрын
What a piece of work ! Thanks a lot for such dedication into this topic !
@philippfinke458 Жыл бұрын
I really like your videos. You spent a lot of time investigating to find the drawbacks of the Gri Gri. This will help a lot of people becoming better belayers. Also, perfect explanation of the physics involved. Thanks for all your effort!
@angrybirder9983 Жыл бұрын
I have a hypothesis on why it is more likely to lock when the rope is yanked hard: During a fall, the rope gets accelerated. This acceleration should be the highest at the beginning of the catch, when the rope is under tension the first time and the rope on the belayer side goes from zero to the speed of the falling climber very quickly. And in this case, the force on the brake side isn't just the static weight, but also the force required to accelerate the rope. In a static scenario, the force is F = mg. For a rope accelerated by a, the force is F = m(g+a).
@IAmMaarten Жыл бұрын
My thought exactly, it's not (just) the weight of the rope on the break side that matters, it's also the force required to accelerate it, which is probably why a sudden hard pull is more likely to engage the cam than a gradually increasing speed. Regardless i think the main message of the video holds really well, and this is fantastic work to show how and why it is important to provide a breaking force even with assisted breaking devices
@mzkabn Жыл бұрын
precisely!
@leoingson Жыл бұрын
True.
@hii4973 Жыл бұрын
Amazing video! Very well researched and also great videography to show what you are explaining
@projecteer4498 Жыл бұрын
This is great, especially with the balance between physics/demonstration/practicality. Will definitely be rewatching in the future and learned a lot
@whelmking6497 Жыл бұрын
Ben.. this is exactly why I am happy to be a monthly Patreon supporter of your channel. This is simply the best climbing information on the internet. For me, the big lesson (as a grigri user) is that the brake hand is not only being used in case the cam doesn't engage, but that the break hand creates the friction required for the cam to engage. This is such valuable knowledge.
@HardIsEasy Жыл бұрын
Ah, this takes time to make, so having people like you supporting me is amazing, puts my pressure on finances lower and helps me to focus on investigating and creating. Thank you so much!
@Monscent Жыл бұрын
Well, thats not quite the truth though. Every time i climb i yank the rope at my partners grigri before to extra-confirm that its fed correctly (its just part of the standard check). My partner never holds the brake line in the "correct position" at that point as we are doing the partner checks. And yet every time it engages, never failed so far in hundreds of checks. Can it fail? Im sure. Will it? Probably not? Should you hold the brake line? Of course. Is the extra safety still good to have? Yes.
@fabian624 Жыл бұрын
@@Monscent I do the same, also as part of the regular partner check. I may be wrong here, but I think it engages due to the massive acceleration you achieve when you yank the rope during the check. This acceleration causes the brake rope's mass to generate a higher resistance force than it does with its own weight (i.e., under 1g). But you probably wouldn't get that acceleration when your climber falls because their theoretical max acceleration of 1g is reduced by the quickdraw friction. So the brake rope wouldn't put up the same resistance as in the "yank test". I.e., you have to put up that resistance with your brake hand. If you "yank" a bit more slowly in the test, it will slip (at least it does for me).
@iain_nakada Жыл бұрын
Awesome video, as usual. And I swear the production and editing are getting smoother and smoother. Actually really psyched for the next one on the range of self-locking devices. A subject I'm really interested in and follow closely.
@olivierlaborde7887 Жыл бұрын
as a mega jul user. im really curious what he has to say
@joseramonguillenlopez2272 Жыл бұрын
Your videos are incredibly valuable for the climbing community. Great video as always, thank so much and congratulations for the amazing work
@Shrimpycus Жыл бұрын
Another amazing video, backed by science! I hope you realise you are literally a lifesaver by bringing this to our attention
@linegrip Жыл бұрын
Fantastic video Ben! 👍 So nicely done, clear, on par, extensive, and comprehesible... truly a masterpiece! WOW 😯
@ottard Жыл бұрын
Wow, what a great video! I'll have to watch it a few times to wrap my head around it all.
@oriolmarti3108 Жыл бұрын
I'm sure this will just be another common comment, but this video is absolutely fantastic man. If almost every video you make is a 10/10, you have surpassed the level in this one, congrats and thank you for this content.
@HardIsEasy Жыл бұрын
I appreciate every comment, not only for the algorithm, but it's really nice to feed back to my energy to create more ;)
@n2b998 Жыл бұрын
Great instructive video. It demonstrates that explaining how something works is a great way to train someone to use it well.
@Gui_M Жыл бұрын
Great video. You're research went far into the physics involved behind all this. And the way you explain makes it very understandable for everyone. Can't wait to see the next video and your experiments on the others auto-locking devices. 🧐
@charanvantijn541 Жыл бұрын
Thanks so much. I was wondering about this for so long. You've answered all my questions. Super!
@philipparnold19 Жыл бұрын
This video is pure satisfaction to me, sendig it to friends who won´t listen about not holding the break strand, too 🙂 Thank you so much!
@olakoppe Жыл бұрын
I was very curious on how the physics explenation in this video was going to be, based on your instagram posts. But I have to say I'm impressed by the quality, and think you nailed it! Good work
@andreboily8645 4 ай бұрын
Amazing video, from the climbing information to the physics its a masterclass in merging real life with school and making it super interesting
@EricNietofilms Жыл бұрын
I liked this video a lot! for a safety recomendation, I would separate more the 2 pulleys on the beam when you are doing this, having heavy weights falling just next to your head sounds a little bit risky 😅
@HardIsEasy Жыл бұрын
but but.... I would have to walk more ... :))) haha thanks 👍
@ryenschimerman2127 Жыл бұрын
As long as we're not returning to the days of @HardIsEasy creating a fall while holding a sharp knife, I'm good. Those got my anxiety up :p
@NippyKindLangur234 Жыл бұрын
@@HardIsEasy dont get hurt on our behalf
@jonnes__4657 Жыл бұрын
And wearing no safety shoes sounds also risky. .
@samuelmellars7855 Жыл бұрын
Yes, I was going to say something similar! Although I think his head is reasonably safe (the weight is unlikely to swing that much sideways as it drops) I was very worried about how/where the weights would bounce to after hitting the floor! Also, spreading the pulleys out would be a bit safer on the beam, especially if the weight is dropped as close to a pillar as is safe, and the belayer is as close to another pillar as is safe!
@muchachonechvile5078 Жыл бұрын
Great, thorough video! Loved the physics explanations and the time taken to make this video, keep it up 👍🏼
@jnonymous Жыл бұрын
I just realized you are the same guy who created the video about the effects of dirt on climbing rope. Your videos are fascinating and educational to me. Knowing how to keep ourselves safe empowers us to enjoy ourselves in the moment. I would enjoy more content like these last two videos!
@ruhrml Жыл бұрын
Ur work helps many climbers and enthusiasts around the world to learn more. Thanks!
@someoneelse1904 Жыл бұрын
Amazing video! Some really interesting outcomes there.
@tytoalba19902 Жыл бұрын
Love your content man, keep going. Well explained, great production and topics of broad concern.
@gusasso Жыл бұрын
The feeling of a new video is like a new season of my favorite tv series kkkkkkkk niceeee
@johnarinehart Жыл бұрын
Thank you so so much for all of this work that you are putting in to test and find what can go wrong and how. I wish more people would watch your videos. I share them with my friends to try and spread the word. I like to get into this nerdy details of climbing 🤓
@sofussverressnnfinne204 Жыл бұрын
Great vid, Ben. I might try to use some of this GriGri knowledge to get smoother with paying slack as well!
@jadefalcon001 Жыл бұрын
What a fantastic video! This is a terrific example of applied newtonian physics. Love it!!
@eriksabo8102 Жыл бұрын
Usually I never comment youtube videos but could not help myself, this is just awesome work! Thank you!
@buckcorrigan9595 Жыл бұрын
Great video ! Glad to see you're back, I was wondering what your next video might be...
@ilyaSyntax Жыл бұрын
perfect sponsorship segment. First ad I actually appreciated seeing -- applied to the content and non-intrusive. Thank you Ben for all that you do
@HardIsEasy Жыл бұрын
Awesome, thank you!
@belaygear8889 Жыл бұрын
Great video with great insights and great entertainment. Love it! Also, can't wait for the follow up! Doing a lot of similar testing with belay devices. Using my findings for teaching a better understanding of the different devices. And in every workshop there are at least a few usually experienced climbers, stating "Grigri grips the rope no matter what!" and "Grigri is the best device! ... always!! ... and for everybody!!!" (exclamation marks included). The only device i could not outsmart was the REVO. Looking forward to see your findings! Keep up the great work. It makes our favorite sport a safer one.
@Engineer4Free 9 ай бұрын
Great video my dude, very well done 🙌
@alekseynalivayko1140 Жыл бұрын
Thank you for what you doing. Ill show this video for all my friends
@pymzorr Жыл бұрын
This is insanely good. Thanks for all your work !
@adebh Жыл бұрын
Amazing video, yet again. Thanks Ben 🙏 Cannot wait until the next one 😃
@junuhunuproductions Жыл бұрын
Amazing scientific overview! This is probably the most rigorous study on grigri available to public 🙏🙏🙌
@lil_laxho2633 Жыл бұрын
Super engaging stuff man! Love it thanks for your dedication
@schluppvomgrunenstern7394 Жыл бұрын
As always an awesome video. Keep going. Can't wait for the upcoming video.
@windsweptmtn Жыл бұрын
Super high quality video, this was awesome!
@joerivanlier1180 9 ай бұрын
I've never been in to climbing or heared of a grigri, but man the KZfaq also was on point, I loved this video. It was both good in science, production, safety education and the jankieness I love. You had fun and hopefully saved some lives.
@nazellina Жыл бұрын
Comment for support. Huge and important info, very cool, thank you
@nicod1886 Жыл бұрын
The amount of time and knowledge he put into this is incredible. Thanks man!!
@WyandWombat Жыл бұрын
Really looking forward to the next video. I was very interested in the Wild Country Revo, but as it took ages to actually hit the market, I eventually got a grigri.
@DarkWolfOfBlood Жыл бұрын
Dude this is simply amazing and so well done! Thank you!
@tonimartin681 Жыл бұрын
Impressive video. Very interesting content. Great way to aproach the subject. Clear way to explain it. Amazing!!!!! Thanks a lot, guy!! 🙌🙌🙌👏👏👏
@oldmanbeta 11 ай бұрын
Wow, amazing video. The production value was great, but the carefully documented (and clearly presented) results were eye opening and super valuable. I always assumed the camming action would be a function of the force of the falling climber and/or the brake strand resistance. I never would have imagined it was *just* brake strand resistance.
@josekasanchez5245 Жыл бұрын
Thank you for this kind of videos. Necessary and important
@lisa-koschat Жыл бұрын
worth the wait- always. Great work. And now I have a video to share to all the ignorants that wońt believe that how they use the grigri is wrong. Thanks a lot
@Blue-pb7kz Жыл бұрын
This is super important information I think - a while back, I saw some very young children in my local gym who were belaying with grigris but holding both sides of the rope together in the same hand, parallel. I was worried it would stop the cam from engaging, but when i went to ask other climbers about it, they told me I worried for nothing and shouldn't say anything (the children were supervised by gym staff, who know better etc etc). They even said, these children are so lightweight that it's a struggle to even lower them after the climb, so there's no way this is dangerous. But I still felt like it was dangerous to hold the break strand parallel to the climbers side. This video shows why that might be! So thank you so much for sharing it.
@liebscher-hatsbracht7079 Жыл бұрын
It is true that some children are so lightweight its hard to get them down after the climb. Still I consider it a bad idea to let them use bad and possibly dangerous belaying technique. With quite a high probability those children will grow and get heavier by time. Or other children that are already older and heavier might see that technique and think its the normal way to belay. Anyway, who decides at what weight you should start to belay properly?
@boerenkoolmetworst 10 ай бұрын
i dont see how you can imply from this video that holding the brake strand parallel might be bad? It only implies that if you don't hold the brake rope and certain other conditions are met (i.e. climbers rope going vertical, you use skinny rope with low friction, etc) then the cam might not engage. Brake strand parallel on a tube-style device is a different story of course.
@Nerazzurri87 Жыл бұрын
looking very forward to the next video! thanks!
@studious0782 Жыл бұрын
Love your videos as always. Excellent job
@Rel1193 Жыл бұрын
Amazing video! Will definitely share with my climbing partners
@asdzt123 Жыл бұрын
Thank you very much. And special appreciation for the torque calculation snapshot at the end.
@mmlei7540 Жыл бұрын
so excited to see the next video comparing different devices. thank you for the in-depth explanation. i get worried with grigri that it teaches people to be lazy with the brake strand, compared to like a tubular belay device.
@wage4598 Жыл бұрын
Thanks, this really improved my understanding of how to use these correctly. That's what we use at our local climbing gym and outside of their instruction this has been very helpful.
@ChadSpence Жыл бұрын
I'm glad you went deeper into this topic! Great work putting this together.
@ripperkon Жыл бұрын
Thx for the video. This is again some valuable content!
@peterlansdale1793 Жыл бұрын
Really excellent video, it changed the way I think about how the Grigri locks for sure.
@dgiroday1 9 ай бұрын
Great video! This helps address peoples positions that it is ok to take the brake hand off the brake end of the rope!
@royalmorris9257 10 ай бұрын
This is a great video and I appreciate the graphics to explain the physics. My physics math is good but by physical intuition is awful so this was really effective in helping me understand how the grigri works
@jennifersolis992 Жыл бұрын
So good! Thanks for all this detail still easy to understand
@eduardohugolopez8598 Жыл бұрын
Hi! I haven't adjetives for describe my opinion for this video... Thank you very much! It is really excellent!
@TheS4ndm4n Жыл бұрын
That's an interestin effect that, once the break side of rope has gained enough speed, it will no longer engage even when it moves to the "front". This seems a lot like that chain fountain effect, that steve mould is so obsessed with. Also, I have seen so many plugs for brilliant, but yours is by far the one that made me most curious. Well done!
@mauriciorengiforuiz5271 Жыл бұрын
Can wait to see your next video!!!
Жыл бұрын
Very high quality content, as always. Thanks!
@HardIsEasy Жыл бұрын
Thank you so much Jeremie, and extra cheers for long term support!
@HigjiH 7 ай бұрын
Thank you! This is the kind of information I use in my job as a RAT SL. So many good videos 🥳
@raphaelcardoso7927 Жыл бұрын
Thanks for the video! I love each one of those tests that you do. So informative!
@musicalmeatball Жыл бұрын
I love this physics deep dive on grigri locking! This really helps being a smart-ass to my friends ;) Really looking forward to the autotuber version!
@ThatsMeOnOrange Жыл бұрын
Superb video. I love your approach to climbing!
@meytschehh Жыл бұрын
Thanks for making these videos!
@hugolaquerre268 Жыл бұрын
Great video! Thank you so mcuh for doing all the work for us
@EducationProfessional-pc6ep Жыл бұрын
Really interesting video. Looking forward to seeing the other devices. Please do mammut smart, it's the most common here in Singapore
@nenad.bakalovic8957 Жыл бұрын
Nice video! Always a pleasure to watch. Hope to see the results of the Mega Jul !!🤘🤙
@arielcroceri Жыл бұрын
Excelente trabajo, gracias por compartir. Muy buen gesto comunicarse con Petzl para comicarles los hallazgos.
@andrewdineen2387 Жыл бұрын
Looking forward to the next video
@Larock-wu1uu Жыл бұрын
Incredible content! Thank you so much!
@danielhamann5552 Жыл бұрын
Thank you for investigating and explaining!
@AndiTode Жыл бұрын
Thank you! Amazing test, and mind blowing informations.
@WeaselBeeH 8 ай бұрын
Bro, you are the reason why I got a patreon account. Keep the good work up, we are all impressed here by your diligence
@HardIsEasy 8 ай бұрын
I appreciate that!
@drummerjason Жыл бұрын
Another great fun and informative video!
@sithpawel Жыл бұрын
great video, as always
@cv7245 3 ай бұрын
I'm firmly a ground squirel, I have no idea about this device - but my background is physics - really good explanation!
Hard Is Easy
Рет қаралды 1,3 МЛН
Hard Is Easy
Рет қаралды 562 М.
VIRAL SPORT
Рет қаралды 7 МЛН