Great video. Informative and entertaining as always. 9 years or so later its currently Joyo PLX8 is $149 USD. The Joyo PXL4 used from Guitar Center is $149.99 USD.

I'm sold to watch ur video on 7 mins. Will get this pedal soon. Nice tutorial man 👍

Hi, thanks for the video. Does the FXL4 work with double pedals like the mxr Overdrive/Boost or the Majik Box Rocket fuel?

Hi mate, brilliant video. Just one quick question about something that is not obvious to me : Can I use it to loop effects that will be both In (like an O/D or Boost) and out of my FX Loop (delay) ? Like some pedals before the preamp... And some pedals after the preamp and in the FX amp loop ?

Hi Hennig, great video, love the cabs in the basement, that's real luxury! How would stereo modulation effects or stereo delay through the send & return be triggered using a looper, as I can't see a way of integrating a delay through the send of the amp so that the lopper triggers it, I would be interested to know how, any ideas? thanks!

How many pedals can you have on one bank?

Is this thing affecting my tone? (For example add more bass or killing the gain...)

Each bank has two sounds and you have four loops. How many pedals you wire into each loop is up to you. If you get the PXL8 You have 8 loops and four sounds per bank.

Fanstastisch! Great demo! thanks for sharing. I still need to digest some of the information and how to setup all of this in the best way! thanks again!

Thanks for the video! If you were using 2 amps in a stereo rig, would this switcher allow you to run separate loops to each amp? For example: if You have a preset to turn on 2 overdrive pedals on 1 amp, then you have two separate overdrive pedals you on a second preset, could the second preset be routed to the 2nd amp?

Just wondering how many presets can be made with the PXL4 and can it control amp channel switching and amp reverb off / on included in presets ?

Great video but turn off the background music please...!

Hello, thanks for the video, very helpful and I am just about to purchase one of these. I am new to pedals, etc, and before I buy I wanted to ask you a question (if you wouldn't mind). I have noticed that pedal order makes a difference to the tone one is producing, and so with that in mind, my question is: how does this switcher account for pedal order? Is it the L1, L2, L3 and L4 order? So if I want my delay BEFORE my reverb I should place it into a loop before the reverb? Thanks for your help, as I said I am new to all of this. Have a nice day.

how do you set up a snake for DC cables like this? I'm a pedalboard newbie but I'd love to learn how to accomplish this set up

Hi, tolles review. Werde diese Woche so ein Ding geliefert bekommen. Habe eine frage zur Signalreihenfolge, das hat mich im Video etwas irritiert. Ist der Signalweg nun von Rechts nach Links, also von Loop 1 nach Loop 4 oder genau umgekehrt?

I really like your demos! great work! I've some joyo pedals too, but also Biyang. They have some very cool stuff too. Love those cheap pedals!

Hi, is there a microsecond cut of signal switching between pedals/programmed loops. I suffered this issue with the mooer programmable switchee and don't want the same again. For example, i play a chord, as it rings i press another channel. Does that sustain continue uninterruped (apart from pedal tone) or is there a microsecond of silence between both channels? Thanks

great review man! i think i need the pro version to use de drive channel and fx loop of my amp? thanks

Hi bro!I am enjoying your channel!! ihave a question:can i use this to send guitar signal to 3 amps withouth using any pedals?like an aby thing?

does it work an efx loop? my amp has no effect loop inputs on the back

is this possible to use the strymon mobius pre/post

ONE question: do these things work as 4 guitar switcher? I mean I have 4 guitar to go in one pedalboard is it possible? Is that a stable/adeguate signal ?

Have you noticed any issue with tone degradation from your amp with the Joyo switcher?

hai man, you have 5 effect in this vidio, so how you compare that? thanks bro

Is that delay before drive? Or you use only external drive from pedal?

thanx, wouldn't mind testing some byiang pedals as well.... maybe I will get my hands on some.

Hi is it possible to program a preset with different parameter? For example, bank A is for a distortion pedal with 50% drive and bank B is for the same distortion pedal but with 100% drive

Danke Henning! :) Very useful Demo!

Is the PXL4 capable of switching channels on a Jet City head amp? This amp has a one button footswitch with a simple mono jack to connect.

Where do you get it that snake cable?

What is the name of the red overdrive?

EXCELLENT demo

i have a mesa boogie rectifier head and many different pedal effects, i would like to know if it's possible with these Joyo looper to switch the pedaleffect with the amp channel in the same time, example : the delay with clean channel, the distortion in the crunch channel....??? thank you in advance for the reply.

You can get it at any music store really... Check Thomann if you live in Europe, they ship anywhere... but you can buy it anywhere... usually in the PA department... check my video "bass rig live" you can see the fxl4 in action...

Can use for parallel effect?

I have a booster and a delay connected to my pxl 4, the bosster sounds loud when alone (A), but when combined with the delay (B) loses volume, which could be the problem? thanks

I buy this, or PXL8... Nice video, like always.

Hi, great channel. I have a question on the PXL4, I am looking to run two electro acoustic instruments (one at a time using the same guitar cable) but through two separate pre amps to get different volume, gain and eq settings for each, both needing some effect pedals, reverb etc. Do you think the PXL4 would work taking the signal in, then routing through one preamp in say loop 1 plus pedals in say loop 3 as one patch, and the other pre amp in say loop 2 and its pedals in loop 3 and 4 all as patch B. Hope that makes sense......

how do you connect a wireless system

Instead of banking presets, are you able to use this as a 4 channel independent switcher without having to program it?

Here the drive comes only from the pedals. Delay in front of the amp does not work with drive from the amp.

hi, thank for the video i think i have solved my problem with this pedal. basically what i want to do is. want to have distortion no delay no nothing., for lead delay chorus with over drive pedal. and clean with chorus little delay. and obviously some sort of noise gate to mute all the noise. do you think this pedal will be enough ? and how would you put chain of pedals. i have boss tune , digitech heavy metal master , artec delay, mxr gt od , and mxr zakk wylde chorus , planing to get noise gate soon. this is my first pedal board and i dont really know how to set them up properly. many many thanks in advance.

Hey pauly..i'm just interested with your technique, using the looper with snake cables...but i'm just wondering..if these long cables are used, is there possible occuring signal degradation??

No available at Thomann's. Where else? Is it a reliable switcher do you think? Thank you!

Thanks for sharing, mate! God bless u!

Nice shoes and video.

the more i see u the more i love u mate

Gibt es da einen Unterschied zwischen dem fxl4 und dem pxl4? Und warum hat Thomann das fxl8 nicht mehr im Sortiment? Gruß

Harley Benton FLX8 pro now 179e at thomann... still cheap but still :P

Hi Henning! Is it possible to do the 4 cable method with this thing? I want to use my amps drive channel, but with an overdrive on front, and some FX on the loop. Vielen Dank!

Nice channel. Abonniert ;-) Thanks from Germany

EytschPi42 - I'm late to the discussion on this, so sorry if already answered. My question is about if you place individual pedals in their own loop, can you control the pedal order?

That is the JOYO Crunch Distortion !

No, none... just used it live with my bass rig, there is a video, check it out... works great!

Coole Videos! Die haben mir bei dem einen oder anderen Pedal echt geholfen! Aber arbeite vielleicht noch ein bisschen an der englischen Aussprache :)

I have a question! how can i run the wah pedal and line6 wireless into this?

Hi Henning. Bin tatsächlich gerade über diesen kleinen Helfer gestolpert. Schön, dass du auch eine Demo dafür parat hast. Ich konnte leider keine Prodkutbeschreibung finden, die mir sagen kann, wie breit das Pedal ist. Außerdem hätte ich gerne gewusst, ob die geliebten Pancake-Stecker auf der Rückseite Platz finden...

nice video!

Can it switch amp channels?

When does your Mr Gugu sponsorship begin?

Wait... this has it's own power supply built in?

Straight up!

does joyo make any non programmable loopers?

They should have called the unit the "confusion"

I didn't get how I connect the pedals to this switcher...

irgendwelche insiderinfos, ob der looper nochmal in die Läden kommt? :)

59 euro? no I see 104 on Thomann!

Nope.. You've lost me.....

I couldn't watch it all. No need for that background music

Cringe