HARLEY DAVIDSON INNER PRIMARY SEAL REPLACMENT TWIN CAM

Рет қаралды 288,981

2 жыл бұрын

IN THIS VIDEO WE DISASSEMBLE A 5 SPEED TWIN CAM INNER PRIMARY AND REPLACE ALL THE SEALS AND REASEMBLE THE BIKE,
Paypal Channel Donation: www.paypal.me/HarleyDavidsonW...
Lisle 58500 Hook for Shaft/Seals amzn.to/3z7tbay
Lisle 56750 Seal Puller amzn.to/3EQPu5P
16-Piece Punch and Chisel Set amzn.to/3sEUzvr
Small File Set amzn.to/32KlcEr
Milwaukee 2767-20 1/2" Impact amzn.to/3z8y3MF
OTC 4514 Mini Snap-Ring Pliers Set amzn.to/3exoAFa
Main shaft Sprocket Wrench SOCKET amzn.to/3pBNHwJ
Jims Main Drive Seal Installer Tool amzn.to/3znsY3n
Slide hammer to vice grip adapters amzn.to/347Q56l
OTC 7703 Basic Slide Hammer amzn.to/3sEVP1D
Mainshaft Bearing Inner Installer amzn.to/3mHY3th
Paypal Channel Donation: www.paypal.me/HarleyDavidsonW...
This is a list of the OEM Harley Davidson part numbers and quantities exactly as used in the video.
ITEM NUMBER DESCRIPTION QUANTITY
11147B O-RING (BIG BLUE ORING BEHIND PRIMARY) 1
11150 RETAINING RING (LITTLE GUY FOR SHIFTER SEAL WASHER) 1
11165 QUAD SEAL(FITS IN BEHIND METAL SPACER BEHIND SPROCKET) 1
12035B OIL SEAL (( 5TH GEAR OIL SEAL) THAT SEALS TO THE MAIN SHAFT) 1
12045 OIL SEAL (SHIFT SHAFT SEAL) 1
12052A OIL SEAL (BACK OF PRIMARY SEAL TO MAINSHAFT) 1
12066A OIL SEAL (BACK OF PRIMARY SEAL FOR JACKSHAFT) 1
12067B OIL SEAL (MAIN DRIVE GEAR SEAL FOR TRANS) 1
25416-99C DURBY COVER GASKET 1
31430-94 SEAL FOR STARTER JACKSHAFT BOLT 1
33126-94 LOCKPLATE FOR JACKSHAFT BOLT 1
33318-85 LOCKING TAB PLATES (FOR BOLTS INSIDE PRIMARY) 5
33344-94 SPROCKET SPACER 1
33849-97 SHIFT LEVER 1
34901-94C PRIMARY COVER GASKET 1
34906-85D PRIMARY CHAIN INSPECTION COVER GASKET 1
34091-85A PRIMARY BREAING RACE 1
35211-91B SPROCKET NUT 1
3784 SET SCREW (COMES WITH SEALANT ON IT) 1
856A HEX SOCKET SCREW (NEW SCREW FOR THE SHIFTERON THE TRANS) 1

Пікірлер: 490

@io3010 2 жыл бұрын

Brad, as a fellow mechanic (30 plus years aircraft, motorcycles and cars) you are very thorough, and you really clean things well before you reassemble. If I needed my Harley worked on, you would be my man!! Thanks for the video, I learned a lot, keep them coming!

@HarleyDavidsonWizard 2 жыл бұрын

Thanks, will do!

@dewisnu9168 Жыл бұрын

@@HarleyDavidsonWizard : why harley davidson doesn't using CVT??

@Jackapoo1 8 ай бұрын

Outstanding thank you.

@billgonzales8978 8 ай бұрын

stay with aircraft pal

@gregleonard7391 Ай бұрын

You explain things perfectly and show torque. Direct to the point. Well done.

@Hockeybros71916 Жыл бұрын

Buddy this is far and away the best video on a repair I’ve ever seen. Keep making them brother. Thanks for your time!

@HarleyDavidsonWizard Жыл бұрын

Thanks for the compliment!!

@cmoore1752 Жыл бұрын

Brad, thanks for making these videos! They are the most detailed ones I think on KZfaq. You saved me a lot of money and gave me the confidence to wrench on my bike! Thanks again. Keep the channel alive! Best I have seen by far! Thanks!

@ReedRyan79 Ай бұрын

That is the reason it costs so much to get things worked on in a shop is: Labor is not just man hours, it is all those tools that you do not have. Have you heard of the snap on man? The SNAP on MAN. That goes to every shop? You know what works, it is cool. You do amazing thorough work. Keep it up.

@tomcorbett6557 Жыл бұрын

Have to say this is one of the most thorough step by step videos I've ever seen on this task.

@HarleyDavidsonWizard Жыл бұрын

Thanks.

@lowluv72 2 жыл бұрын

I've referenced this video at least 50 times so far, thank you.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks

@Scott-rr7dy 2 ай бұрын

BRAD, That was the most concise explanation on how to...complete the job.i do my own work by watching these videos..and am a proud owner of a 1994 FWDWG .THANK You my freind...

@Scott-rr7dy 2 ай бұрын

Brad correction 1994 Fxdwg. Thanks again lol I hate spell check..

@Scott-rr7dy 2 ай бұрын

Sorry Brad. I got the bike definition wrong ,due to spell check. It's a FXDWG 1994.LOL😅

@HarleyDavidsonWizard 2 ай бұрын

Your welcome. Glad it was a success for you.

@ericrhinehart6055 7 ай бұрын

Take it to a dealer and you will never get this kind of attention to detail. A mechanic being this meticulous would be told by the supervisor to just "Get on with it already, just do what you have to do to get it out the door!" Fortunately, I have located a local Harley mechanic who is that meticulous and opened up his own one man shop. Great work, great video, and great dedication to excellence!

@HarleyDavidsonWizard 7 ай бұрын

Thanks for the compliment. I work at the dealer tho. Lol

@carlbruhn1772 2 жыл бұрын

You have a gift for teaching. Organized easy going, point to point. There are many great techs, few that can teach. Well done!

@timojokela4554 Жыл бұрын

Prettygood video. Brad is a professor of mechanical engineering and very easy to follow installation. He has very good teaching skills. Thank`s dude!

@HarleyDavidsonWizard Жыл бұрын

Thanks for the complement. 👍

@kevinbivens5262 2 жыл бұрын

Awesome tutorial! Best I have seen on this job. I have a 99 Classic that I have to accomplish very soon. Thank you for making this available to us non professional mechanics!

@jefffletcher3262 Жыл бұрын

I followed this video and was able to do this job on a 1995 heritage. Would not have tackled the job without it. My local harley dealer had all the parts in stock.

@HarleyDavidsonWizard Жыл бұрын

Great to hear. Thanks.

@wellaitsaniice3307 2 жыл бұрын

Brad, you are the man! Finally someone with the attention to detail like myself that I can follow but a wealth of knowledge of this machine I do not have. Thank you!

@HarleyDavidsonWizard 2 жыл бұрын

Thanks for the compliment!

@jefferyepstein9210 Жыл бұрын

Go out and get one. You only live once.

@wellaitsaniice3307 Жыл бұрын

@@jefferyepstein9210 I have an o6 roadking.

@jefferyepstein9210 Жыл бұрын

@@wellaitsaniice3307 I'm sorry I misunderstood. I thought you meant you did not have the machine as in bike. Road Kings are nice. I have an Ultra Limited but almost got a Road King myself.

@wellaitsaniice3307 Жыл бұрын

@@jefferyepstein9210 yeah all good. Had to do the same work to mine. Broke a belt and had to replace seals.

@davidseymour6110 7 ай бұрын

Brad great video I got a Softail that had the transmission removed much thanks for helping me put this bike back together correctly

@Strapps31 8 ай бұрын

Great step-by-step video. I just finished this job yesterday thanks to your video. When I went to remove the main shaft and compensator nuts, they were a little stubborn. I purposely reversed the impact wrench for a few seconds to tighten each nut, then reversed it again and the nuts spun right off. Thanks again for the video. My 1999 Road King Classic has been dripping for years!

@andyd8185 2 жыл бұрын

Brad .... so happy your back to making videos.. always impressed with your style of mechanics ... your honest and true descriptions of repairs and/or installs. keep them coming .. Cheers Andy

@HarleyDavidsonWizard 2 жыл бұрын

Thanks

@loutrai8545 Жыл бұрын

Hi Brad...Nice work brother!!! Im an Ironhorse (Slammer) owner. Love the efficiency and professionalism you bestow in your videos. The lack of background noise with clean voice overs is also a nice touch. Cheers

@patrickflanagan8008 2 жыл бұрын

You really do make the most excellent videos....they are the best, with clear and concise commentary. Thank you from this side of the pond.

@HarleyDavidsonWizard Жыл бұрын

Thanks for the compliment.

@k5edd128 6 ай бұрын

Smiling! 2000 ultra classic, stater went out. I had to use a 1/2 inch breaker bar and a 5 ft cheater bar to break the compensator nut loose. Factory had put a 1 inch strip of red Loctite from one end to the other of that nut. Pain to clean it out as you would Imagine. Replaced that stator 4 times in 80,000 miles last time with the 3 phase system. and it's still working. For a young guy your pretty dog gone good. 60 + years of riding and do most of my own work and I am impressed Sir.

@HarleyDavidsonWizard 6 ай бұрын

Thanks

@golanproducts3683 2 жыл бұрын

Brad, You are my kind perfectionist, I watched your video from start to end, I hope our children and the next generation will be blessed with people like you, thanks for an enjoyable time.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks for the compliment! I try my best.

@kevinmckenna2877 Жыл бұрын

I love the way you work, and explain things in easy terms. I really appreciated the showing of Jim's tool for removing the shifter shaft.

@JorgeReyes-kj6fk 2 жыл бұрын

Thank you so much for this very detailed and educational video. I am in the process of doing the same job my self, I almost missed the shifter seal if it was not because of this video I would probably have missed it. Also special thanks for the tips on how to install the seals using ordinary sockets. Thanks again, I hope my thumbs ups helps you as much as you have helped me!

@HarleyDavidsonWizard 2 жыл бұрын

Glad it was helpful!

@CrazyBeeyaach 9 ай бұрын

Entertaining.. I wasn't even interested in learning this (nor would I try it) but I was so impressed with the care you took and the thorough cleaning that my OCD self couldn't stop watching!! Liked & subscribed! Cheers!✌️😎

@Stormwhopper Ай бұрын

One of the best HD manual vid I have ever seen! Well done and THX!

@HarleyDavidsonWizard Ай бұрын

Thanks for the compliment.

@Vaquero-tp9nq Жыл бұрын

Clear, systematic, detailed and easy to understand walk thru of how to do the work.

@HarleyDavidsonWizard Жыл бұрын

Thanks.

@Daaannyybooii 8 ай бұрын

By far the best video on how to do this.

@HarleyDavidsonWizard 8 ай бұрын

Thanks

@petecohen2672 Жыл бұрын

Thanks for the video! Had one of the Allen bolts back out of my drive belt pulley cover plate and dig into the inner primary. Your video saved my hundreds of dollars. Great help!

@solidfuze99 Жыл бұрын

All I can say is thank you because I got to tell you this is the best video to watch for this procedure the guys to the point he laid out the tools ahead of time you can't lose by watching this one I got my whole bike apart and back together and I'm not a mechanic so this was the ultimate tutorial thank you again

@HarleyDavidsonWizard Жыл бұрын

Your welcome. Like and suscribe please & thank you.

@solidfuze99 Жыл бұрын

You're probably the first video that I liked And subscribe to in a long time and it's my pleasure

@mrdoitall511 2 жыл бұрын

Great comprehensive video! It gives great detail and a real idea of time needed to do a job properly. Thank you for this👍🏻

@HarleyDavidsonWizard 2 жыл бұрын

Thnaks

@brosen101 2 жыл бұрын

Great, detailed video again, and great content. So meticulous and detailed at how you perform the work. Would be great if all mechanics operated this way!

@HarleyDavidsonWizard 2 жыл бұрын

Thanks for the compliment

@chuckflitton5293 3 ай бұрын

just found you Brad! 40+ H D guy, wrencin all the way. GOOD JOB1

@garyhohman3676 Жыл бұрын

The only comment I can make is: ditto to everyone that wants Brad to work on there Harley!!!! Damn good job on every video I have seen!!

@HarleyDavidsonWizard Жыл бұрын

Thanks for the complement!

@charleshall8819 Жыл бұрын

By far this is one of the most informative and detailed videos I have seen.

@HarleyDavidsonWizard Жыл бұрын

Thanks

@lynskyrd 2 жыл бұрын

this vid, like all your vids--- are worth every second. When I work on my bike nowadays, I say to myself "I'm doing this Brad's way" - thanks for doing these vids.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks! 👍

@MrTheDays1 2 ай бұрын

I just want to say I just completed this trask and with your technique seem like everything went well. I rode it around my street, and no leaks .I followed your instructions to the teeth, torque and cleaned threads , I did noticed a chain nosie as soon I started but went away in like 4 seconds , scared me for a second , I did go with a inner primary sealed bearing kit . TIP to clean out the comp and clutch bold I used a drill and a wire brush similar to a baby bottle cleaning brush worked like a charm

@HarleyDavidsonWizard 2 ай бұрын

Glad it was successful for you and worked out.

@G--T 11 ай бұрын

Absolutely fantastic video. Going to look into purchasing the more specialized tools and doing it myself, this video provided the confidence.

@detroitfitz5745 2 жыл бұрын

Yep! We sure missed ya… happy to see the Wizard doin his wizardry!

@shanewright2637 Жыл бұрын

Good job brother I can do my primary with my eyes closed, that being said it would take me forever and now watching how you did it takes no time at all 🤘🤘🤘🤘

@billygillispie4106 Жыл бұрын

Wow!! Very detailed, great job! I could have used this video a couple of years ago but have done a few of these jobs since.

@frankensteinrules6511 Жыл бұрын

Excellent video!! I like the fact that you are a stickler for detail, it pays off to be that way. I have learned that the hard way working on automatic transmissions. Thanks for all your videos.

@TwoWheelRocco 2 жыл бұрын

Great Job, Ty...

@garywheeler1812 Жыл бұрын

Good video and job! That’s why you get paid Big Bucks

@borealmetalworx 2 жыл бұрын

Great stuff Brad. Your videos are super informative. Thanks for posting

@autumnstang97 2 жыл бұрын

You are an excellent technician. Very thorough and careful with your work which is very admirable. I'd let you work on my Harley any day of the week except Sunday. I ride on Sundays.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks for the compliment!

@nadajoey1 2 жыл бұрын

excellent video. i have an 04 softail and this was very helpful. thanks for the tips

@jacobbauer6207 10 ай бұрын

Brad, thank you so much for providing such an informative video. Helped me a ton

@jcar469 11 ай бұрын

Great instructional video. Thanks for the tool list & step by step instructions.

@exupakias 2 жыл бұрын

One of the best videos ever, very professional.Love HD bikes and i am ready to buy Electra glide 2001 from a friend watching also your videos to fix it by myself, first time driving&fixing HD in my life.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks for the complement! Do it! Get that bike and enjoy the ride and enjoy work. 👍

@harleydave2316 2 жыл бұрын

Yay!!!...A wizard video! The last 2 bikes I've owned that were 5 speeds, I did the Trans shaft race delete and put in a complete bearing in the inner primary. Awesome video!

@jon5423 Жыл бұрын

I uploaded the Gasket and Seals 🦭 Part numbers for everyone 1994-2006 so you don’t have to chase down part numbers thanks for the helpful video brad very informative

@nicolasgarofalo417 Жыл бұрын

Where did you upload the list thanks

@HarleyDavidsonWizard Жыл бұрын

I just updated the video description box with all the part numbers and quantitys ect. Just expand the video description, and it's all at the bottom.

@leonardkipp2387 Жыл бұрын

Thanks for a great vid! Very thorough , lots of great insight and tips for doing it right the first time!

@HarleyDavidsonWizard Жыл бұрын

Thanks

@MrHemirox1 2 жыл бұрын

Thanks for the awesome video, one of the best HOW TO's I've seen. Well done!

@HarleyDavidsonWizard Жыл бұрын

Thanks

@TheTc909 Ай бұрын

All ur videos are awesome, thanks brother.

@HarleyDavidsonWizard Ай бұрын

Thanks

@joeledson3257 8 ай бұрын

GREAT Video! Sorry I found it a little late. I will defiantly return BEFORE I work on my bike again. I agree with all the impressive comments. KEEP them coming THANKS

@Sway1177 Жыл бұрын

Just watching all the parts seals and points of failure in the primary really makes me reconsider ever going with the Harley brand. Great and informative video

@HarleyDavidsonWizard Жыл бұрын

Ya. There are lots of parts and seals. But if all the seals are replaced correctly they last a very long life.

@haroldwiser2641 Жыл бұрын

Love the videos AND the narration!! Keep them coming.

@HarleyDavidsonWizard Жыл бұрын

Thanks. Will do.

@usmcdoc2512 Жыл бұрын

Great videos. I use heat shrink tubing on splined shafts to apply seals. Lightly shrink it and leave some foreskin so you can pull it off. (plus it's reusable)

@christopherj9494 2 жыл бұрын

Thanks Brad, Well done. On the List for my 09 FXD this winter. Good to see you back! Was thinking about you the other day....and BAM!! Love your style! Hope your BACK to Shooting more AWESOME Content.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks!.

@gordiehattrick 2 жыл бұрын

Brad, great to see a new video! Awesome work on the scoot and video!

@thedieselpig4448 2 жыл бұрын

Glad you’re back. Clean, clean, clean👍🏻👍🏻👍🏻

@HarleyDavidsonWizard 2 жыл бұрын

Thanks!

@Sam-tq9bx Жыл бұрын

Excellent video of the Barnett Scorpion assembly..Alot of good "extra"information.. Two thumbs up my man.. My first of your videos.. I'll keep watching !!

@philippelajoie1518 2 жыл бұрын

Hey brad,glad your back..best 1hr18 spent.well worth it..the way you did thid vid is perfect..very detailed,calm and no shop noises only your comments..keep up the good work man.

@danielnichols9049 Жыл бұрын

And no stupid music!

@HarleyDavidsonWizard Жыл бұрын

Thanks.

@ismaelmateo4733 Жыл бұрын

Good job!! I can see you take pride in your work.

@HarleyDavidsonWizard Жыл бұрын

Thanks.

@TheSkylark16 2 жыл бұрын

So glad to see you back! Been waiting for months

@HarleyDavidsonWizard 2 жыл бұрын

Thanks. I know! I've been finding myself crazy busy lately.

@stevesimmons4313 2 жыл бұрын

Thanks. Great video. Helped ALOT!

@HarleyDavidsonWizard 2 жыл бұрын

You're welcome!

@SF-jp6qy Жыл бұрын

Thank you so much. I got the seal in, based on your comments

@blainedomingue566 2 жыл бұрын

Great video of breakdown and install bro!! Appreciate it!!

@HarleyDavidsonWizard 2 жыл бұрын

Appreciate it!

@goodboyringo9716 Жыл бұрын

Very nice teaching with your video , loved it. Keep up the nice work. I'm subscribing

@flashburn3580 2 жыл бұрын

Good to see you back.. Thanks

@gregoryranlett7868 2 жыл бұрын

Thanks Brad, welcome back!

@sergeymatrosov1988 Жыл бұрын

This best technical video ever! Great!

@lenjames 2 жыл бұрын

Sitting here with a tooth ache waiting for morning to come I decide to watch some KZfaq and bam....the Wizard is back! Great Vid and Happy New Year!

@HarleyDavidsonWizard 2 жыл бұрын

Thanks! you too.

@bigsteffel Жыл бұрын

Hello Brad thanks to this fabulous Video i used this to repair my 2005 Touring, without Your help i didńt Get it Thanks a lot Greetings From Germany Stefan

@HarleyDavidsonWizard Жыл бұрын

Your welcome.

@jasonbuckles9402 2 жыл бұрын

Great to see you back. Missed the videos

@robertrich5774 Жыл бұрын

Wow!! Wish you were in my area! I would not have a second thought of any work performed by you on my Bike!!!! Attention to detail is spot on!! Great video glad I found your channel… just picked up my bike for the exact work done and can’t figure out how! But my primary sounded horrible, o we merry says that’s just your clutch. I say never sounded like that before.. rode home 18 miles!! And pulled primary myself to inspect what was going on. And some how jack bolt came out of starter shaft with locking tabs bent in place. ?????? Called shop and he says what? So anyway loved your video just hard to find loyal and thorough mechanics.. thanks for sharing..

@HarleyDavidsonWizard Жыл бұрын

Thanks for the compliment. That's a bummer, at least it doesn't sound that serious. Thanks

@billk65 2 жыл бұрын

This is a very awesome video one of the best I have seen you cover a lot of things thank you very much I am now a subscriber this has helped redo my son's 2002 FLHT

@HarleyDavidsonWizard 2 жыл бұрын

Thanks👍

@ccarter7292 2 жыл бұрын

Great video I need the same job completed on my 2001. Just wish I had the tools to get it done.

@Road-Worthy Жыл бұрын

Awesome video! Just stumbled on your page not doing this job at the moment but really enjoyed watching and listening 😀

@HarleyDavidsonWizard Жыл бұрын

Thanks.

@amberbali8881 2 жыл бұрын

Brad, I always used a plumbers pipe wire brush (for copper pipe interior cleaning) to get the loktite out of the compensator nut and clutch hub nut. Worked very well. Still use it on the clutch hub nut but have since mad a thread chaser out of a 7/8-14 x 3 bolt and dremeling the reliefs in it. Works even better. Keep up the videos, they are a good resource for people.

@HarleyDavidsonWizard 2 жыл бұрын

That's a good tip.

@smiley4288 2 жыл бұрын

Wow good job my friend your videos just get better and better!!! 🤘😎🤘

@HarleyDavidsonWizard 2 жыл бұрын

Thank you very much!

@Zx9rtrip 2 жыл бұрын

Thank you very useful for me the best I'v seen by far

@HarleyDavidsonWizard 2 жыл бұрын

Glad it helped

@michaelisrael6267 2 жыл бұрын

I am so glad your back.Welcome back my friend.Missed you dude.Great video.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks thanks thanks!

@bikerfarmhand Жыл бұрын

Jim's makes a really nice main shaft seal driver.

@pauld7309 Жыл бұрын

Good video as always bro. I believe I have a leaky crank shaft seal in my 01 E. G. Put some dye in my oil and she's lighting up! 52,000 miles on her!! So I may as well do them all & probably the final Drive belt also!! Damn old Harley's, if I could just hit the lotto!!!😊🙏

@burrefpv9273 2 жыл бұрын

Great video! Thanks 👍

@MrTheDays1 3 ай бұрын

Planning on doing this , and this video is on point with information

@HarleyDavidsonWizard 3 ай бұрын

Thanks

@maxheadflow 7 ай бұрын

Very well done. Learned a few tricks that are worthwhile.. Couple minor things. 1. You don't show cleaning of the crank or mainshaft threads. I use a wire brush and cleaner. I do the same for cleaning the nuts as you. Hooked scribe. 2. Really the only places you need to add the ultrablack on the case is around the bolt holes where the bolts are inside the case. You missed the 2 front ones. Additionally on dynas and softails, there is one lower bolt that needs ultrablack on the threads. Stuff I do different. 1. I like to put the pulley on first then hang the U shaped puller on the shaft after getting close with the inner primary bearing race. 2. I use the old bolt on the shift arm but a little blue on the threads and grease under the head. The issue really isn't the screw backing out but keeping the arm tight on the shaft. The problem is that the arm splines on the arm need to bed into the shaft splines. the problem is that they aren't checked or tightened enough, which you mention. 3. I use a machined aluminum plate that fits over the main drive gear that is machined to set the seal depth then use the pulley socket to drive the seal in.. 4. I tend to reuse the old bolts and pulley nut if they are in good condition. Not say my way is better, just different. Good stuff I learned. 1. Really like the idea of using an impact for the needed 30-45 degrees instead of fighting with a breaker bar and pulley holder. . Again good video.

@HarleyDavidsonWizard 7 ай бұрын

Thanks for the comment. Good information to chew on. I apreachate it.

@thomaswilson7352 Жыл бұрын

Brad just wanted to thank you for such a great video

@HarleyDavidsonWizard Жыл бұрын

Thanks. Your welcome.

@richardneufeld8436 2 жыл бұрын

Awesome work, thanks for the detailed tutorial. Just curious why you didn’t replace the inner primary bearing, thanks.

@peterbergeris6510 2 жыл бұрын

Excellent demonstration.

@HarleyDavidsonWizard 2 жыл бұрын

Thanks👍

@jleeod Жыл бұрын

What took him only a few hours took me 3 weeks. Damn the amount of specialty tools and the such you need for a Harley.

@G--T 11 ай бұрын

I am a little concerned of this happening to me as well

@user-st8yi5pg5n 4 ай бұрын

It's all been said.....amazing job brother

@HarleyDavidsonWizard 4 ай бұрын

Thanks

@ivannmorales Жыл бұрын

Fantastic video! Thank you!

@HarleyDavidsonWizard Жыл бұрын

Your welcome. Thanks for watching.

@jamiewroten92 2 жыл бұрын

Jesus. I was debating on doing this myself until I saw all the tools needed.

@SavageNitemare 2 жыл бұрын

Glad to have you back. Been too long...

@ultraclassic01hd 5 ай бұрын

Would never attempt...but it is fascinating watching you work on the bike. It is a very learning experience on how this part of the motorcycle works. Great video! "⭐⭐⭐⭐⭐.....😎"

@HarleyDavidsonWizard 5 ай бұрын

Thanks

@jamesmcqueen6038 10 ай бұрын

Your a good mechanic.

@harleyloco1853 2 жыл бұрын

Awesome video. Thanks a million for sharing

@HarleyDavidsonWizard 2 жыл бұрын

Your welcome. 👍

@markscheidlmeier6523 Жыл бұрын

Very well done Mister Brad!

@JoseluisRodriguez-zy7zw 2 ай бұрын

Espero y me entiendas.gracias por tu video lo disfrute mucho y aprendí mucho más .muy bien explicado .te mando un gran saludo desde México distrito federal y una vez más gracias espero y sigas asiendo muchos más videos así de bien esplicados .