Harley Davidson Rocker C Seat Removal - Install Danny Gray Solo Seat

Рет қаралды 99,904

14 жыл бұрын

If you enjoy my videos please purchase your items by using the links below and supporting my channel so that I can keep making these videos.Thank you!
Geo.
Rocker C Seat: amzn.to/2uXle6j
Shave Nation GeoBuff Headwear: goo.gl/tgZ3nq
Harley Tool Kit: amzn.to/2viEdYh
My Current Filming Equipment:
Camera: amzn.to/2ukcw4e
Memory Card: amzn.to/2uozfgf
Tripod: amzn.to/2tkrMdq
Microphone: amzn.to/2ufiSCx
Background Music: amzn.to/2sVSA40
KZfaq: bit.ly/GeofatboyYT
Facebook: bit.ly/FBGeofatboy
Instagram: bit.ly/INSTAGeofatboy
Twitter: bit.ly/TwitterGeofatboy
Have A Great Shave, Have A Great Day!
Geo.
How to Remove the Stock Seat and Chrome Flip Seat Support Assembly and Install a Danny Gray Solo Seat on a Harley Davidson Rocker C Motorcycle 2008 2009 2010 2011 from Start to Finish To Remove the Large Gap Between the Rear Fender and the Seat.
Tutorial, instructions, and directions.
Misc: Remove Bolts apply loctite as needed. Remove Seat. Fill unused holes with bolts, grommets, or silicone. Use Heat shrink to splice and seal wires, wiring. Use penetrating agent and or wd40 to loosen bolts or hammer and screwdriver in counterclockwise direction. Battery compartment below seat. 8 9 10 11 model year years.

Пікірлер: 66

@savageravengames3214 2 жыл бұрын

Thank you for this I not long got my rocker c last month and wanted to change the seat for a lower one, this has helped a lot thank you 😊

@gilbertmartinez2959 9 жыл бұрын

Thanks so much for the detailed reassembly, I am finished with the Air intake and exhaust and now onto the solo and passenger seat. I think your video will speed up my installation....Much appreciated! Stay up Geo!.....Gil

@sentino68 13 жыл бұрын

Much nicer! I love the blue stitching. . .I never liked how the stock seat had that gap. This does the trick. I had a Softail Std. 05. Sold it in 2008. With wife, and 3 kids I had decided to stop riding for a while. I do miss it alot.

@biged3ff149 5 жыл бұрын

That cover of landslide by the pumpkins is my favorite cover of landslide!!!

@pskemster 4 жыл бұрын

Night and day better! Awesome video,,,thanks for the share!

@roguewuulf 10 жыл бұрын

Have to say great detail to detail instructions.

@heidebill 10 жыл бұрын

Great Video, Thanks Bill

@luckybear0301 13 жыл бұрын

cool bike! i love it

@MotorcyclerideCyprus 7 жыл бұрын

I ride around the beautiful island of Cyprus on a Harley Davidson Rocker C! You can see video's of the bike when I bought it with the stock seat and when I changed the seat for the Rocker seat which is a solo seat and sits a lot lower than the stock Rocker C seat. here is a link to the channel! kzfaq.info

@geofatboy 10 жыл бұрын

Have A Great Shave, Have A Great Day!... shavenation.com/ Then go for a ride on your Harley!

@teamwounder 13 жыл бұрын

@geofatboy thanks for the input. my incident was at night too. decided to show off in front of others and sped up to pass them... along comes a sharp onramp that was hidden by darkness. stabbed brakes, dreaded front wheel skid, bike dumps, i fly off...broke my ankle. unfortunately it was totaled. Needless to say, no more night riding, if i ever get back to it...

@andrewdrinkwater1986 3 жыл бұрын

Great video mate :-) lovely bike 👍

@geofatboy 3 жыл бұрын

Thanks! 👍

@luckydog9500 10 жыл бұрын

Just an idea for you.Those bolts that had the torx head that were difficult to remove mat be more easily removed if you can get a bit for the hand held impact driver. An adapter will make that possible.

@tomrizzo1554 7 жыл бұрын

awsome detailed instructions foolproof. thanks

@geofatboy 7 жыл бұрын

Thanks Tom!

@jesrivera8395 8 жыл бұрын

Thanks for the vid Dude, have fun, Ride safe

@geofatboy 8 жыл бұрын

+Jes Rivera Thanks Jes, You as well!

@johnrodgersdigital 2 жыл бұрын

I have quick release harley bags that have a rame that mounts on that rear seat bolt hole. Will I be able to pu them back on with this seat?

@G5Hohn 11 жыл бұрын

Geo-- it's possible that the bolts are cheap (read: soft) and that's why they tend to strip. A properly designed Torx head is actually pretty strong. More likely is that HD is using Loctite of some kind on those bolts because they May tend to vibrate loose. Instead of Loctite, HD could have used something like a Nord Lock washer (search "wedge lock washer" on McMaster Carr)

@mritzmann 14 жыл бұрын

Hello, thanks for posting this. Question: If you removed the gap between fender and seat, how does the suspension will work now?

@billyrae1903 3 жыл бұрын

Looks cool 😎💪👆👍☝️

@ValdemarAK47 9 жыл бұрын

HI, in the video I can see the rear turn signals with black lenses. I have a question. The rear turn signals are leds and in theory the rear turn signals can not be dismount. How change you the lenses??

@teamwounder 13 жыл бұрын

@geofatboy grim question - ever dump a bike? i had an accident last oct and wonder if i should get back on saddle again. btw excellent shaving videos.

@MrRadfory 3 жыл бұрын

Sir, are there rubber grommets that support the rear of the stock seat? I have the stock seat and they have (2) steel posts on the rear of stock seat that look like they go into something for rear stability?

@SteelHeart4Ever 13 жыл бұрын

@geofatboy Thanks for your fast answer. Well that was also one off my worries that the tape could do something to the paint. My opinion is, I'm pretty sure that my fender comes in contact with the seat because I felt it already a few times today(first ride with DG seat). Roads in Belgium are terrible... But I guess that when there is no dirt between fender and seat it will not do any damage to the fender without the tape. What do you think about this? Correct me if I'm wrong. ;-) Greetz bro

@SteelHeart4Ever 13 жыл бұрын

This video was very helpfull for installing the DG solo seat on my Rocker C. Many thanks for it! Now I have 2 questions. I've tried to install the protective fender tape but didn't work out well. All air bubbles and fingerprints underneath it. I had 2 pieces of tape, now I still have one. 1) Is it necesarry to install the tape? 2) If yes, do you have good advice how to do this? Many thanks bro. Greetz from Belgium.

@ceferbu 3 жыл бұрын

Hi, nice video, did you find a cheaper seat option similar to danny's?

@geofatboy 3 жыл бұрын

Cheaper-No, once I put this on there was no need to keep shopping any further...

@danrodgerson4606 8 жыл бұрын

Thanks for doing the video. Never really liked that gap behind the seat. Dan Rodgerson

@geofatboy 8 жыл бұрын

In my opinion, it's a design flaw on HD's part. Everybody I know complains about it.

@danrodgerson4606 8 жыл бұрын

My question is whether this is something I can do myself. If it were 4 bolts- no big deal. Seems you needed to wrestle with it. Is this common?

@danrodgerson4606 8 жыл бұрын

Also- is there a re-sale market for the old seat or have they flooded the market?

@Koshman32 12 жыл бұрын

The fender must hit the bottom of the seat on every bump? The heartland or danny gray conversion kits are the way to go if you don't lie the stock seat.

@EatLiftSleepAU 11 жыл бұрын

Thanks for reply. Does it ruin it physically or just looks wise? I recently bought a Rocker C with Danny Gray seat but I want to be able to carry a 2nd person from time to time....

@randyjones2608 11 жыл бұрын

since the fender moves wouldnt it run into the seat at all and hows that feel when riding?

@zaxtor 13 жыл бұрын

That's a really nice motorcycle.

@0luc 3 жыл бұрын

Yes

@chriscooper4990 3 жыл бұрын

So what is the thread size on the bolts under the seat and on the ones on the side?? I cant find anything on the internet

@aristotledecastro745 4 жыл бұрын

Are you selling the original passenger seat assembly?

@EatLiftSleepAU 11 жыл бұрын

Is there anyway to accomodate a passenger with the Danny Gray seat? for example purchasing a second piece or something? Thanks.

@Mei-mw3zc 2 жыл бұрын

Does it come in red flame?

@chuckymonster1000 9 жыл бұрын

How much was the seat

@xd1rtx 13 жыл бұрын

what about an aftermarket passenger seat for this bike, i've found two, one by bitchinseats for $2k, and one by corbin for $900, any ideas or other seats you have found, tempted to make my own, $900 is to much for a passenger seat

@cesarrodriguez3080 7 жыл бұрын

Not sure why so many folks have problems removing certain bolts off their Harleys. If those were factory bolts then they are not cheap! Harley uses Grade 8 bolts for all their strut and seat applications which are rock solid. I've never had an issue removing any Harley bolts with only hand tools and never needed to apply heat or use other such methods to help loosen them. I've torn down both my Crossbones and my brother's Rocker C to almost the frame and drivetrain and not once did I strip or break a bolt. You mentioned that the torx bit was a sloppy fit which sounds like the REAL problem! I have various torx bit sets and they are not all made the same. If you try a torx bit on a Harley bolt and it feels sloppy, try the same size bit from another maker. You will be surprised how much difference there is between manufacturers. Once you get one that fits snug like it should, all you need is a good 1/2 in breaker bar. Good video otherwise!

@rodolfoayala2726 3 жыл бұрын

Can u send me the link where I can buy that seat without the blue Stitching plz

@geofatboy 3 жыл бұрын

Yes-Here it is: amzn.to/3kRBlgj

@eddiewilson6348 3 жыл бұрын

Wondering if you know the model number of the Danny Gray seat in this video

@geofatboy 3 жыл бұрын

Sure do-This is the model of the seat: amzn.to/3kRBlgj

@curtriscampbell2860 Жыл бұрын

any toe got the old second seat for sale

@geofatboy Жыл бұрын

Sold the bike, and the seat a long time ago, but thanks for asking.

@ebenziesman284 3 жыл бұрын

Takes a T47, no problem removing the bolts.

@cqqlbrd 12 жыл бұрын

Wrong .... Im 210 and have the shocks all the way up, and when riding smooth there is a gap BUT hit any bump and the rear WILL hit the seat.. Yes they give u tape but I dont like being bucked by the fender hitting bumps... I returned the Danny gray seat and ordered the rocker seat not the C , it fits better and still gives u that lower seat .....was under$250

@bigpulla1987 Жыл бұрын

How did you get blue stitching

@geofatboy Жыл бұрын

You order it that way. It comes in black, red, or blue stitching.

@bigpulla1987 Жыл бұрын

@@geofatboy yea I clicked on link butit doesn’t give me a option to choose color any other place I can look to find?

@geofatboy Жыл бұрын

@@bigpulla1987 Go on Ebay and enter Danny Gray Solo Seat and the color stitching you want if any.

@xLuky 12 жыл бұрын

Man...where's my "clearing off the runways"?!? :(

@telhack693 9 жыл бұрын

after watching this video i was sea sick

@ervinstark1354 10 жыл бұрын

hi! where can i buy the stock seats?

@geofatboy 10 жыл бұрын

Your local Harley Dealership.

@ervinstark1354 10 жыл бұрын

They havent got it..

@davemetz7368 4 жыл бұрын

I have the original stock seat on my rocker c, with the built in passenger seat, along with the folding mechanism for the pass seat, that I am sticking with. But I also have another stock seat which does not have the pass seat tucked into it, and I do not need it anymore. Also have a extra rear fender w/ the tail lights still mounted on it, which I don't need either. Interested ?

@pipbexon5863 4 жыл бұрын

Dave Metz what price for the seat?