Harley Engine Quality Isn't What It Used to Be

Рет қаралды 96,955

Жыл бұрын

Harley engine quality isn't what it used to be and that's both good and bad. The newer Harley engines are still quality but just in a different way, they've eliminated a lot of problems from the past and now we have potential issues. While Harley engine quality isn't what it used to be it's actually arguably better. Yes Harley-Davidson builds them different now, yes their are failures in some cases. But comparing the failures to the 100's of thousands of bikes in service on the road the number really is pretty miniscule. Potential issues are not guaranteed so don't be afraid to modify your later model Harley-Davidson motorcycle.
SUBSCRIBE FOR MORE kzfaq.info?sub_...
Random and Funny Videos!!
WEEKND OPs Playlist www.youtube.com/watch?v=5HHmv...
Bikes on the channel:
Motorcycle: 2016 Harley-Davidson Sportster XL1200CP (Sportster 1200 Custom)
• Harley-Davidson Sports...
Custom Parts Installed:
LED Headlight amzn.to/2LY4NA4
LED Bulbs Front Signals amzn.to/32PjpIT
LED Bulbs Rear Signals amzn.to/2OaqP5j
Smoked Out Turn Signal Lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Heavy Breather air cleaner
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Reach Seat
Harley-Davidson Chrome and Rubber Collection grips
Drag Specialties Offset Clevis Footpeg Conversion Kit
Aftermarket Chrome Foot Pegs amzn.to/30C68SA
After Market Chrome Shifter Peg amzn.to/2LBTTAZ
Aftermarket Chrome Crash Bar amzn.to/308QFhg
Aftermarket Detachable Back Rest
Aftermarket Docking Hardware For Back Rest amzn.to/32RhZ0j
Harley-Davidson Air Flow timing cover
Harley-Davidson Air Flow clutch cover
Screamin' Eagle spark plug wires
Screamin' Eagle spark plugs
Black Front Axle Covers amzn.to/32TrSe1
Flipped Down Stock Mirrors
Motorcycle: 2017 Harley-Davidson Sportster XL1200X (Sportster Forty-Eight)
• 2017 Harley Sportster ...
Custom Parts installed:
Harley-Davidson Factory Security System
LED Headlight amzn.to/2OcFih2
LED Bulbs Front Signals amzn.to/3086pQV
LED Bulbs Rear Signals amzn.to/34VFfw9
Smoked out turn signal lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Exteme Billed Air Cleaner (Black)
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Burst Collection Foot Pegs
Harley-Davidson Burst Collection Grips
Harley-Davidson Burst Collection Shifter Peg
Aftermarket Black Crash Bar amzn.to/32MsUZq
Screamin' Eagle spark plug wires
CNC Front Axle Covers amzn.to/31GGE7W

Пікірлер: 595

@GixxerFoo Жыл бұрын

Do you feel like Harley-Davidson engine quality has gone forward or backwards with the new engines?

@antondahl8945 Жыл бұрын

Evo 883 sportster. Best HD engine. Only one I'd own.

@herbie6860 Жыл бұрын

Backwards I learnt first hand with two new M8s both 50k lemons both gone never again

@EnteKross123 Жыл бұрын

Video Idea. I would love to have a series like "how to make your Harley XYZ bulletproof" I personally own a 2012 wide glide with the 103 TC in it and would love to own this thing for a looooong time

@familylandscapecompanyinc.7355 Жыл бұрын

@Shane G can't help ht ask..... 50k lemons as I 2? Total engin fail or needed some work?? I've got 70,000 on 2015 103. Couple problems over the years but nothing catastrophic

@johnjagodzinski9878 Жыл бұрын

Depends on the bike, IMO. If the bike is a lighter bike, the Twin Cam and the M8 are fine. The touring bike both engines are very underpowered. Mass production and cut cost spending. To me, this just gives aftermarket companies to build parts to make the engines better all around or buy a complete aftermarket engine and don't worry about the Harley engine. The same principles apply to sports cars that become race machines. Usually, if you have the money, you drop a crate performance engine in and pull out the original engine. This way, if you sell the bike, you can sell the bike with the original engine. To me, if I'm going to beef up the original engine, it is because I want it to last, and I'm going to keep it for a long time. Otherwise, like other auto machines, I'm going to cash it in for a new one. Personally, I like 2010 softail classic. It's practical. Get me point A to point B. Ther isn't a perfect motorcycle. Just the one each biker prefers, and that's the bottom line.

@jamessouthworth1699 Жыл бұрын

I went from an Evo Sportster to a 2003 Twin Cam. Yeah, I found out the hard way that Harley cheaped out on the internal engine parts. That would be acceptable on a cheap bike but it is absolutely unacceptable on a brand that claims to be "Premium" and charges a premium price. BTW, I miss the saggy shelf with the aerosol cans in the back. It was like a mascot.

@danfecke Жыл бұрын

I went from a 99 sportster that I kept for over 10 years into it 2003 road king I put about 45,000 trouble free miles on that bike. What problems did you have? I did upgrade the complete two hydraulic tensioners at 15,000 miles.

@martincvitkovich724 Жыл бұрын

My 2003 RKP has 114,000 miles on it. still runs good. Although I had to replace cam chain tensioners 3 times BEFORE they went bad, well , that's what wrenches are for. The only other internal parts were lifters, I replaced at 100K

@calimilk1113 Жыл бұрын

😂😂😂😂😂😂 thought i was the only one that noticed that !!

@herbie6860 Жыл бұрын

I had 2 1200 sporties one was 01 Buell but with absolute young fella abuse 75000kms & 55k other Absolutely for from cold startup I never had 1 issue besides a battery in either,by far most reliable engine & I've had multiple twincams M8s,dropped over 50k on both M8s & both spent more time in wrty than my shed both all same engine issues deadset lemons even with stage 4 kits etc all done from new at dealer I now have a Honda till I find the right twincam.....

@rodzimmerman1979 Жыл бұрын

I bought a '99 TC new and rode it over 100,000 miles. I put a gear drive cam and had it dyno tuned at 15.000 miles to get rid of the tensioner worry's and that engine had never been apart otherwise. I changed my oil every 2500 miles. Up until '95 they had the bolted crank which was practically indestructible. What kind of problems did you have with yours?

@frankmarkovcijr5459 Жыл бұрын

Let's not forget the evolution motor was developed under AMF, they spent a lot of money and time developing a good engine that took care of all the shovelhead engine problems.

@chrish5791 Жыл бұрын

Thanks for that kind word about AMF. I always think about that company as the source of Harley’s troubles, but if they were the driving force behind the Evo then that certainly dispels that belief. I’m pretty sure that AMF was responsible for Harley’s venture into snowmobiles as well as I remember that tank they built and tried to label it as a snowmobile. Now that all the snowmobile companies are going to 4 strokes maybe Harley should try planting a Milwaukee 8 in a machine!

@martincvitkovich724 Жыл бұрын

plus AMF brought in CNC machines

@frankmarkovcijr5459 Жыл бұрын

@@chrish5791 at the bankruptcy court the Davidson family begged the judge to let AMF buy Harley-Davidson because Bangor printer had a history of buying companies taking a tax write-off demolishing the factory and he would have Harley-Davidson cups and t-shirts and knickknacks but no motorcycles. Just like general Mills / MPC saved Lionel trains AMF saved Harley Davidson otherwise we would have neither one today of course they were still American made in those days both the toy trains and the motorcycles. If we were not the world's policeman bankrupting our country to keep peace in the world all of the countries that stole our prosperity would be killing each other left right and center and we would make money selling them ammunition as long as it was backed by gold 🥇🪙.

@spaceflight1019 Жыл бұрын

@@martincvitkovich724 The story I heard is that Vaughn Beals and friends had to buy new Cincinnati Milacron machines in order to get the loan they needed to buy the company approved.

@markwitkowski6418 Жыл бұрын

and don't forget,AMF produced the 5 speed transmission,and the 80 c.i. 1340 c.c. engine..I had a 79,AMF-H-D Lowrider,silver,black,red pinstripes.She was beautiful,ran great,never any major problems.

@markmcintosh7095 Жыл бұрын

My local Harley Tech has one million miles on his EVO. He rides it every day rain or shine. I really enjoy your channel I have learned a lot.

@brandonmacon3317 Жыл бұрын

1981 fxwg Shovel. Original motor still kicking 40+ years later 🤙

@mikec1254 Жыл бұрын

is his name Shadow?

@markmcintosh7095 Жыл бұрын

@@mikec1254 His name is Ron

@canadianloon6433 Жыл бұрын

I ride mine rain shine and during cold Canadian winters

@angelsierra1988 Жыл бұрын

As far as I'm concerned you're the most informative and entertaining of any Harley Chanel out there. Keep it up and Thank You !!

@starshine8892 Жыл бұрын

100% Spot On!

@billystone5069 Жыл бұрын

I agree.ty for the information 😅

@billystone5069 Жыл бұрын

I agree 💯 ty for the videos n info

@ranchodeluxe1 Жыл бұрын

Well. Aren't you gullible?

@TheRoadGlideRider Жыл бұрын

I still loved my Shovel. Easy to fix on the side of the road. You just needed to maintain it. 🏍💨🏍💨

@darrellteague8629 Жыл бұрын

My 88 cubic in. Twin cam has been going for 17 years. Last carburetor model. Still running great.

@scottsmith6932 Жыл бұрын

Harley-Davidson, One step forward and two steps back. When they removed the TIMIKIN and went to the flat roller they took us back to 1953. Then the tried to cheapen up on the bearings in the cam chest they took a step back to the last of the Shovel heads that came with a caged cam roller bearing that failed. H-D came out with a service bulletin that stated if a German bearing is installed remove it and install a full compliment Torrington cam bearing. They didn't learn their lesson and tried it in the Twin Cam with the same result only with no service bulletin for replacement, All they care is it that it will last until the warranty has expired. From the dawn of time until the EV2 the crankshaft was a Five piece unit with replaceable; crankpin, pinion and sprocket shafts. The EV2 has a Three piece Crank with the shafts machined from the flywheel castings. They had failures of the pinion shafts due to an improper radius in the machining cut causing a stress riser that would cause the shaft failure.( I replaced a few working for the dealership) I have built some nasty Nitro Dragsters and never had the wheels shift, since working on the twin cams I have seen more than one set of wheels scissor and it sucks. The only other failure in the EV2 was the plastic crank case breather gear that would disintegrate. Once the got those few snags worked out the were a great engine. Keep the great video's coming and I hope everything works out to your satisfaction.

@fq7879 Жыл бұрын

The m8 doesn't even sound like a harley. The evo sportster is the best sounding harley as well as the early twin cam engines with a carb.

@paulfiore7083 Жыл бұрын

I've got a 96 Sportster S and 01 FXDX and I agree 100%😊

@carlbruhn1772 Жыл бұрын

Thank the EPA for that.

@jimkraft9445 Жыл бұрын

Harley made a mistake with the EVO. They run well and for a long long time. Many keep them for years rather than trade for something without the known longevity. My 99 Softail Custom only has 65,000 on it and runs like new. And the fit and finish on the bike are fantastic. Having heard of problems of the later twin cam engines, I love the simplicity of the EVO. But Harley cannot sell new motorcycles if the old ones keep running. I have kept mine stock for the most part except for lots of Chrome the first owner put on it along with drag pipes and a K&N air filter. My 99 comforts me.

@deedeeindustrialsuperprecision Жыл бұрын

I went through the factory school in 1981 and saw a fellow trueing wheels on a modified trueing stand with a foot operated air center point, trueing more than one crankshaft a minute he was doing. The early Twincam loose cranks were fixed the dirt bike method of welding the pin. Old and retired now.

@d-lowz-no9931 Жыл бұрын

These new bikes are electronic nightmares. Too many things rely on sensors that piggy back on other systems, so when something goes wrong you have no idea where to start if it’s not blatantly obvious. I went through that with a 2020 streetbob.. never again. Went back to a dyna with a 96 twin cam and called it a day.

@ampini212 Жыл бұрын

The problem with "cost savings" is that they rarely trickle down to the consumer. It's simply not about pride anymore. Just greed and investors reports

@getoffmygrass6974 Жыл бұрын

Timken bottom end ran until 2002 Twin Cam years, it didn’t end with the Evo. When I replaced my 2002 Twin Cam A flywheel with a 4 3/8 stroker, my bottom end still looked new at 70k. Regular maintenance is the key to longevity.

@timmcpeck7527 Жыл бұрын

Love your channel Gixx, I look forward every week to your videos and find them very informative. Congratulations on the new move for what it’s worth.

@stevenbrown5213 Жыл бұрын

Really enjoy your channel and look forward to it every week. Recently brought a one owner 97 Fatboy (Stage 1) done 22000 kms , so any info you put out on the Evo feeds my passion. Cheers 😎🇦🇺

@jimpoulos2272 Жыл бұрын

Congratulations on the new place! Was getting worried that something had happened when the Friday videos stopped so suddenly, I’ve been watching for a while and I’ve learned a lot. Keep the content coming!!

@chriszasada9756 Жыл бұрын

Outstanding, glad you are moving in the direction you wanna go. Been watching channel for awhile now and continue to look forward to what you post. I always come away with learning something new every time . Thanks for posting can't wait for more

@seanotoole3542 Жыл бұрын

I really enjoy your content. Glad to see you persevere through your recent moves!!! Always look forward to see your next topic when I tune in. Past Harleys; 96 FXSTC, 97 FLRHI, 16 FLHXS (someone totaled last summer, lucky to be alive and still riding! currently went back to an EVO 97 FXSTC, stock 9k on it from orig. owner, which I'm slowly making changes to.

@shovel_head80 Жыл бұрын

I have had several shovels over the years new and used . I never had any issues with them and were quite reliable with proper maintenance and upkeep. That’s the major problem with the shovels was the lack of maintenance cause the majority of the problems .

@brandonmacon3317 Жыл бұрын

Facts 👌 💯

@bmp72 Жыл бұрын

After I bought my shovels (used) and all the issues were fixed, they have given me no problems whatsoever. (knock on wood)

@jimfischione2743 Жыл бұрын

I believe you're right. Shovels were reliable if they were maintained properly. The other reason for their bad reputation was too many of them wound up in the hands of people that simply abused them.

@garyhopkins6337 Жыл бұрын

100% right, I have had shovels half my life with no problems out of the ordinary.

@TeensierPython Жыл бұрын

That’s true with all engines.

@RicardoGarcia-jm4pu Жыл бұрын

Congratulations on the life changing events. Hope all is well. I appreciate all the EVO content. I'm subscribed to your channel till I die. Keep up the good work 💪🏾

@AnalogDude_ Жыл бұрын

I'm glad i chose for the BMW R1100RS, a pretty cool design those cyl heads and having a camshaft snucked in there, futuristic suspension. It seems to do 0-200km/h in about 11/12 seconds with only 90HP and 100nm Torque and doing 5 liter / 100km.

@markharvey3770 Жыл бұрын

And yet, neither the author, nor anyone else mentions the huge involvement of S&S in the development of the Evo. H-D' s best motor EVER!

@GuretoSefirosu Жыл бұрын

This is hilarious! I have been talking to some other person on here and he says the old engines (the ones that killed HD prior to the Evo) were solid, and the new ones are solid, and Evos aren't all that. I of course told him he was one in a million. Now you publish this (I agree 100%) and it cracked me up. The timing was perfect. I plan to stick with my 1991 Evo. It seems to be solid. I also prefer the reliability of my carburetor over fuel injection, where any one thing can stop me in my tracks.

@johnlfrank8078 Жыл бұрын

Hey Gix , your show on Friday is the trigger that switches my brain from “at work mode” to “it’s the weekend so I can work on my stuff mode “ . I look forward to you pulling the trigger and throwing my brain switch each Friday. 💪

@2trdmustanggtfordf1hdsgsfa80 Жыл бұрын

The MoCo needs to solve the crank runout issue. Their solution was to allow for a higher runout to be considered in tolerance. Rebuilding the crank was a major expense during my 50k refresh. Come on HD….Just weld the damn crank.

@thomasschuh980 Жыл бұрын

Your videos are my first resource whenever I have a question about HD. Excellent content and delivery.

@SaddleTrampTV Жыл бұрын

Thanks for the topic. You just confirmed my suspicion as to why they did away with the tapered crank bearings. Cost and production.

@bc8265 Жыл бұрын

You said something that speaks volumes. Drive sensible. Big twins are not hot rod engines, there I said it. I've had Shovels,Pans, Twin Cams and am currently on a 67 Shovel. Every one I've had required some mods to the engines for longevity. Treat them for what they are and they will take you down the road and back. Good articles, hope new digs work out for you.

@markwitkowski6418 Жыл бұрын

BC,You are 100% right.if you start out with a good running H-D and you treat it like it was built to be treated,then it will last you forever,there will always be maintence and some parts do wear out over time just keep up with her.If you pound her into the ground,rev the f out of her,or just don't maintain her properly,then like anything,you will end up with a broken motorcycle.Don't blame the bike,blame an aggressive right hand.

@ranchodeluxe1 Жыл бұрын

Baggers running 7s. No hotrodding there.

@echevarriawilson Жыл бұрын

I did get some rework done on my 2018 Road King Police with a multitude of things including a new oil pump and installed am external breather. So far it's been running great and I have about 80k miles on it. I ride it everyday down here in Florida. Hopefully it lasts

@Kajemyster Жыл бұрын

How much did the oil pump and labor cost you? Need to do the same to my 2018 Low Rider eventually.

@echevarriawilson Жыл бұрын

@@Peter-nm1ps I actually bought it used with 10k miles on it. The rest I've been putting on. It's actually been very reliable and the one time that I did get it towed was for a nail in the tire and since I had the wheel and tire warranty, that didn't cost me anything

@echevarriawilson Жыл бұрын

@@Peter-nm1ps that's great that it still runs good. I'm not into sport bikes anymore unless it's a track day. I just find Harley cruisers way more comfortable and practical for everyday use. To each thier own though. At least you're on two wheels. Keep riding, and keep enjoying what you're doing

@echevarriawilson Жыл бұрын

@@Kajemyster The oil pump was covered under warranty and they actually changed it to a 2022 oil pump. I'm looking to changed out the cam plate, and put in a new cam as well to the ones gixxerfoo recommended for a little more power and longevity. I may have my local shop do that instead of taking it to a Harley dealership. I got quoted about $800 for the cam plate, cam and labor.

@larryhenry5594 Жыл бұрын

I've done lots of research & watched many of your helpful videos before buying parts for my builds. 2006 street glide, Arlen Ness big sucker, pro pipe, fueling OEM+ cam plate, 509 S&S cam, & Power vision. Bike runs real strong for 88 cubes. Keep up the great videos! I'll be watching. Thanks

@ranchodeluxe1 Жыл бұрын

"Research" The most overused word ever in the internet era.

@darrellteague8629 Жыл бұрын

My 88 is still running great after 17 years.

@entiatmule3820 Жыл бұрын

Love your channel. Your passion shows! i wish you the best with your changes.

@frankfurther3828 Жыл бұрын

EVO's Forever. and ever. Built better than today's board of directors.

@hampdentime Жыл бұрын

Thanks for your comments and videos, well done. I have too many bikes. The '15 Ultra is the one we ride most often. It has a 103 and is not changed up except for exhaust. Very dependable so far ( 6K ). My favorite to look at and think they will never be made again (because of cost) is the '97, '98 and '99 Heritage Springers. They really are artwork and they all have EVO's. thanks again

@bhudson4739 Жыл бұрын

Most informative channel I have found!!. Keep em coming!. Congrats on the new shop!.!

@keepitreal317 Жыл бұрын

Always learning from you’re content buddy. Hope all is well brother and keep it coming!!

@shovelhead56 Жыл бұрын

Gixxer, always enjoy your topics and narrative. You apparently have had A Lot going on. Hope things work out for the best for you. Hang in there Amigo🤙

@blues3824 Жыл бұрын

Always great to hear from you, even when I don't know if temptin bearing for a crank ha ha ha . But my Evo is running great!

@ericsorrell6170 Жыл бұрын

Happy to your powering through, as always great videos and wish you continued success

@nbitt1319 Жыл бұрын

Look forward to your videos every week! Fantastic content!!! By far one of my favorite channels 🤘🏽

@johnbelculf5441 Жыл бұрын

I really appreciate your content. I think we all do. Thank You. I love the insight and history of the tech. Keep it rolling our way. I think you should be at 100k subscribers by now!!! PS I like when you expose the corner cutting the co. made, and the FIX.

@louisgoldfond6326 Жыл бұрын

Good luck with the new digs GF. Keep bringing that great content.

@simonkennedy6116 Жыл бұрын

Great that you've made the move and I pray you won't have any more strife. I noticed your sound is much cleaner too, lavalier mic?

@TheStarbuck61 Жыл бұрын

Understand Life Changes brother. Glad to see you still hanging out your sign. My brother and I really appreciate what you do. Hang in there!

@danlonick800 Жыл бұрын

Right now, it may feel like a few rough & rocky steps on your winding path up the mountain my friend, but just remember the view you will get from the top will have made the whole journey worthwhile. Not every step is easy, but every step counts towards your destination so long as you never give up mate. 👍

@ct895 Жыл бұрын

As usual great show I always enjoy your info. great luck on your new place!!!! CT of WV

@tonytillman3953 Жыл бұрын

Gixxer, you put out a lot of good content and information, knowledge is power! You have a good supportive fan base, keep up the good work, I for one, am not going anywhere.

@nicklanderos3773 4 ай бұрын

Congratulations on your move! You definitely deserve it with all the help you’re giving us viewers

@GixxerFoo 4 ай бұрын

Thank you so much 🤗

@77xlchop Жыл бұрын

good video, GixxerFoo! I learn a lot, thanks.

@jman6621 Жыл бұрын

Really dig & enjoy your videos. Thank you for them. Have you considered doing a video on Trike specific camshafts? Especially for us still rolling around on twin cams 🤣

@xlr8r3VA Жыл бұрын

Excellent video Gixxerfoo! Sorry to hear about your moving situations, but been there, done that. Looking forward to the new content! Love my Evos! ('95 Electra Glide Custom, '00 883 Sportster) Hey, decorating tip, bring back the firefighters calendar. LOL!!!

@jeffblackmon288 Жыл бұрын

I really like my Evo, so far. My friends with TCs love my Evo. Please put that old wonky shelf back up in your new shop. It makes us feel at home.

@theslowride66 Жыл бұрын

I love your perspective. I know Moving sucks ! about 7 years ago I got eviction notice on my BD & less than a month to find a place & move. I am set up now About 2000 ' A/C ( Florida) but its been rough. But im still here & going forward. EVO's ROCK!!!! Cant wait to see your shop

@mickc4633 Жыл бұрын

Well, don’t forget we always have S&S and if you go that way that should fix most of your problems

@brandot.7466 Жыл бұрын

Thanks for all the great content you provide!! I bought a FLHXS 2021 $43,000.00 CAD Right out of the box shifter pawl spring had to be replaced.few month later if you leave the ignition on wile fueling the ECM locks up and the bike won't start must leave it sit with ignition off for 10 min.(dealer can't repair it)and this year went on my first ride throttle by wire puts the bike in LIMP MODE . OH YES and the front disc have been replaced 2 times warping problems. I sold my 2004 ultra classic to my Nabour and he IS having a blast with that bike LOL THANKS HD

@geodez2959 Жыл бұрын

I hope the circumstances you speak of aren't family related. Wish you all the best and keep the videos comin bruh.

@asquared7861 Жыл бұрын

Missed you bud. Good to have a video from you today.

@sgtcole69 Жыл бұрын

bought a new road glide recently. the clutch slipped terribly right out the box. got it home, rode around for a few days and had to put it in the shop.

@JustRusting Жыл бұрын

Thanks for doing this video, I didnt know about the pressed cranks, I guess I never thought about those things. I have a 2008 Sportster 1200 other than the intake air box and the exhaust pipes I will leave it alone.

@bigd4561 Жыл бұрын

I was going to buy a new Honda Rebel but loved the look of the 883. Saw a 2001 for 1/2 the cost of the rebel. What sold me, however, was the EVO reputation... bullet proof. I hope I do not curse myself. So far so good. 😊

@bigd4561 Жыл бұрын

@Peter Done 2 years ago... so far no regrets. Very different machines. I have to admit, I did my refresher course on the Rebel, nice bike, but I wanted a little more character in my older years. Already owned 3 Asian bikes.

@bigd4561 Жыл бұрын

@Peter Well... not this guy. Icon jacket and my 883 has been labeled a girl's bike... by big Harley guys ... you know, the ones you classify as apes!

@MrBradfordchild Жыл бұрын

2001 is the end of the run. Great bikes!

@bigjoe805 Жыл бұрын

Great video. Thank you for the information. Always look forward to your videos 👍🏻😊

@mikehawk4665 Жыл бұрын

Congrats on the new place Of course man i cant wait for a new vid every week!

@GixxerFoo Жыл бұрын

Thank you for the support!

@hambone2335 Жыл бұрын

As a Harley owner all my life and the son of a Harley owner I would like to know when did Harley ever have quality?

@huntridesail Жыл бұрын

Thanks for your content and valuable info

@GixxerFoo Жыл бұрын

Thank you! I appreciate the support!

@drsparwaga Жыл бұрын

This is the reason I went with a Sportster, the fact it is tried and tested for decades.

@spaceflight1019 Жыл бұрын

My 2005 1200 Roadster has 83,000 miles on it and was a good investment.

@Mattis_Bengtsson Жыл бұрын

enjoying this channel a lot! keep it up man!

@nickahrens6139 Жыл бұрын

A lot of the Milwaukee 8 when you change the Fluids you will have metal on all 3 drain plugs including the engine. I put s&S 1200 KITin the 2021 883. The gear case was loaded with metal fragments from when the cases were machined and not cleaned properly.

@chrish5791 Жыл бұрын

Congrats there Foo, you got at least the camera backdrop of your new creative work center organized. It’s just not the same as when we could take bets on that shelf behind you and if it was going to collapse by your next video! The suspense that used to add to your videos was palpable.

@michaelmitchell5909 Жыл бұрын

Love your channel man, keep doing what your doing and ill always be a subscriber...hope your things are good for ya man...

@paulfiore7083 Жыл бұрын

I bought an 01 Dyna and afterwards found out it had the Timkin bearings and bolted flywheel. Another $2,500 got me a forged cam plate, better oil pump, gear drive cams, new lifters, inner cam bearings, S&S .510 cams and adjustable pushrods. It's finally as good as an Evo. It came with a Supertrapp 2:1, K&N filter and Mikuni 42mm carb. I added a billet fork brace and Jagg oil cooler. Was going to do a 95" kit with high compression, headwork and forged pistons but it runs so well I hate to touch it but stage IV is just one step away.....

@craigkemmerzell5741 Жыл бұрын

Best of luck with your new shop I really like your show keep up the good work

@51panhead91 Жыл бұрын

Great video. I miss your old garage with the overloaded shelf lol

@scotthayslip2332 Жыл бұрын

I got a 99 FXDL. Just put on a S&S 510 gear drive kit, thunder header exhaust and mikuni carb. Bike rips, dyno was showing 78 horsepower

@ironheadsally Жыл бұрын

Thank you, love this video and all the info! Kept hearing “harley cut corners”…evo was too reliable, twin cam ensured customers had to come back for repairs (cam chain tensioners big one) lol. Great info, learn a lot!

@carstenmartindallmer3728 Жыл бұрын

Nice one,every new video from you make me smile.Keep it up mate😊

@pb68slab18 Жыл бұрын

I was at York for the 25th Anniversary and saw the pre-production Twin Cam motor disassembled. The 'new' thin-wall die cast engine cases were made by Mercury Marine as evidenced by the cast-in mark. Mercury Marine has extensive experience in precision, high-quality, thin-wall die cast engines. Not sure if HD is still outsourcing their cases. I've also heard the last few years of the EVOs were cast and machined by S&S!?!?

@scottarmstrong1172 Жыл бұрын

Why would you spend extra time and money on the bottom end? Shiny paint is the important thing.

@ThamsWorld Жыл бұрын

You always have the best info.. I run a 98 and enjoy the old stage eagle stuff

@mikeskidmore6754 Жыл бұрын

Torque and Horse Power are one thing but RPM's are a huge factor too .

@larrys.3992 Жыл бұрын

Keep up the good work GixxerFoo!

@Prometheus1979 Жыл бұрын

I’ve been a follower for a good while now, you deserve way more subs.

@canadianloon6433 Жыл бұрын

My FXR Evo motor sounds great, super reliable in the summer and during our cold winters here in Canada. I ride it minus -10 Celsius and this crazy motor loves winters. No issues at all

@fearsomename4517 Жыл бұрын

I ride a '99 Heritage Springer evolution motor is bulletproof. She rides like a dream.

@paulnoeske9120 Жыл бұрын

Just found your channel. Learning tons. Got a merch store yet?

@jameslatoff2037 Жыл бұрын

Gixxer, thank you for your videos and best of luck with whatever you are facing in life. Quick question, when you mention Evolution engines, do the characteristics, like cranks, apply to a 2014 883? Did HD cheapen out the later Evos too?

@spaceflight1019 Жыл бұрын

Sportster engine parts are built differently and tend to be more reliable than the Big Twins. I ride a 2005 1200 Roadster with 83,000 miles on it and it doesn't smoke, leak, or rattle.

@timothyweiss619 11 ай бұрын

I had a 76 sportster which was a disaster, however my 76 flh liberty edition and my 78 flh 75th anniversary were frigging great. Now onto the newer ones they have their quirks, but a twin cam is worth beefing up. Take Care Brother

@biglog5112 Жыл бұрын

I have a 2017 RG and put in the 114 kit right after I bought it. Talking about a domino effect! First the clutch basket exploded. Then the compensator went, followed by the transmission. Oil summing went nuts, so had to put in new oil pump and plate by S&S. Then the Harley Screamin Eagle cams went so new cam and lifters. Although is was expensive, I love my HP now and couldn’t ride a stock bike.😊

@daveytomasulo8164 Жыл бұрын

I wish that last sentence were true! I just yesterday had My stage 4 M8 with 24k miles die on me in the middle of a road trip when a lifter bearing failed…

@796andy2 Жыл бұрын

could always get ironhead/shovelheads running , easy to fix . evos take a beating with no probs

@anchorsaweigh9893 Жыл бұрын

My EVO which until recently was treated poorly but it starts and drives well. I’ve only ruined a few stators and regulators from it sitting around. My TC88 was okay but it has really shown out at a 95ci. Decent power and pop and it’s been reliable. I’m about to invest a decent sum to refresh the bike but the motor is still rock solid. I did convert it to gear drive. My M8s I’ve own have been really good too. I’m about to do a S&S 128 gear Drive conversion when the parts are available again. 114 this far has been pretty damn solid tho.

@mikedawkins6510 Жыл бұрын

Love your educational content

@GixxerFoo Жыл бұрын

Thank you! I appreciate the support!

@deebo1103 Жыл бұрын

I have had 2 TC88 and 1 TC88B bikes. My 01 FXDX was a dream bike and I miss it a ton. My 03 FXD is my current bike and has been a very reliable bike. My 04 Fatboy was my least favorite of the 3 for comfort reasons, just never liked how that bike rode. For the 01 and 04 I did the Screamin Eagle upgrade to the camchest and have zero complaints and had zero reliability issues. All bikes ran all over and had decent power. The 03 I completely tore out the factory cam system for an SS510 gear cam system and that makes the TC88 a much better running motor, hopefully just as reliable over the next few years as the others were. The evo's were fine but I will always be happier to run a TC88.

@richardbesley9683 Жыл бұрын

Thank you for all your information

@og190 Жыл бұрын

I'm glad you found a home for the channel Gixxer, but I have to say, be it not perfect. I love the twin cam. Even with its shortcomings, it's not perfect, but neither was the Evo. I have 3 bikes, all are twin cams, and 2 are souped up . I am out of the buying game, but if I were still working, I wouldn't hesitate to purchase a newer road glide.

@mikeadams5410 Жыл бұрын

Couldn’t put my finger on it at first, then it hit. You must be related to the guy from project farm. I’m convinced it’s the same voice…… great content keep it up Thanks