Harley Passenger Peg Install WITHOUT Removing Exhaust!

No video

Harley Passenger Peg Install WITHOUT Removing Exhaust!

Рет қаралды 34,122

Күн бұрын

How to install the Harley Passenger Peg kit WITHOUT having to remove the exhaust. Harley Passenger Pegs should be easy to install, but they're not! According to the service manual - for a lot of Harley Sportsters and some older Dyna's, installing the passenger peg kit involves removing the exhaust heat shield, exhaust pipes, part of the engine cover, and the exhaust bracket. That just sounds exhausting - and it's totally unnecessary. I'm going to show you a trick in this video that will save you from having to remove and replace the exhaust just to reach that one bolt on the passenger peg kit for your installation.
~ Ride Safe, Ride On!
► Support the Channel by Joining My Channel Membership Today!
www.youtube.co...
▬
MY BIKES:
Current:
Harley Davidson Custom Iron 1275
Indian Chieftain Dark Horse
Previous:
Kawasaki Ninja 650
Indian Chief Dark Horse
Kawasaki Vulcan S
▬
MY GEAR:
My AWESOME Helmet: ILM 953: www.ilmotor.co... OR amzn.to/3mbC1je
My Gloves: bit.ly/2MZvCTv & bit.ly/2uh8GHx
My Boots: amzn.to/2KKfCI7 & goo.gl/dhNMrx
My Jeans: amzn.to/2m3ynYt
My Jackets: goo.gl/gwVQph & wilsonsleather.com
Phone Mount: amzn.to/2zm7ckX
Bluetooth Helmet Headset: amzn.to/46k3Vi4
▬
RECORDING GEAR:
My Drone: click.dji.com/...
My Cameras:
GoPro Hero 9 Black: amzn.to/3cGr4Qd
GoPro Hero 10 Black: amzn.to/32OZ6jZ
Mic: amzn.to/2u68MCm
Mic Adapter: amzn.to/3eN897D
▬
► Don't forget to 'Like' and 'Subscribe'
▬
► Follow me on Instagram and TikTok- @MotobladeX
Like and Follow me on Facebook - @MOTOBLADE
⚠️DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional cost to you. Thank you for supporting me so I can continue to make awesome motorcycle content for you!
▬
► Creative Commons
Music provided by AL: bit.ly/2o9aKkH
#Harley #Iron883 #PassengerPegInstall #MbD&x%

Пікірлер: 45

@MOTOBLADE 2 жыл бұрын

I know this videos is very specific to you Harley owners, so for everyone else I have some good gear reviews coming up. Just hadn't seen a good way to do this on KZfaq, so I wanted to address it for those who might need it.

@acartoon3 9 ай бұрын

Yes i wanted it too ❤❤❤❤

@DEMON_CHILD709 2 жыл бұрын

Man your the best....just bought a 48 today and need to do this install....cheers from Newfoundland Canada

@MOTOBLADE 2 жыл бұрын

Congrats on the new bike! Glad I could help you out. I've been to Newfoundland once before. Beautiful up there! Ride safe brother😎✌🏻

@mikebigeasyrider 2 жыл бұрын

I have a Road King and an Iron 883.stg 1..always wondered if there was an easier way , have avoided it up until now...Thanks for the video. I do sub and watch your video's , just don't comment most times.

@MOTOBLADE 2 жыл бұрын

Good to hear from you! Hope the video helps if you try to install the pegs :) I love the Road King. If I ever upgrade the Harley to a larger bike it would probably be the king special. Thanks for watching!

@nousername4402 2 жыл бұрын

I'll be doing this. Thank you!!

@MOTOBLADE Жыл бұрын

You're welcome! Glad I could help!

@thatindiekid583 Жыл бұрын

This was a very helpful video. Thank You.

@MOTOBLADE Жыл бұрын

You're welcome! Glad I could help.

@LRstudioRU Жыл бұрын

Thank you, bro!

@MOTOBLADE 2 ай бұрын

You’re welcome!

@Carlosization1 Жыл бұрын

Brilliant my friend!! Gonna try this with my Indian Scout bobber with Vance Hines grenades right in the way. My concern is I don’t have the right tools to make a clean cut of the Allen key any suggestions?

@MOTOBLADE Жыл бұрын

An inexpensive hacksaw blade and sand paper from local hardware store. Hacksaw cutting by hand will take maybe 15 minutes but it should be clean, then sand off any burrs.

@Carlosization1 Жыл бұрын

@@MOTOBLADE thank you for getting back to me, however, I don’t have enough height clearance between my Vance Hines grenades, and the foot peg mount. I need some kind of an elevator that would bring up mound, approximately 2 inches. Maybe you or one of your viewers has had the same dilemma? Girlfriend is waiting lol I’m not patiently.

@dawsongibbons3200 3 ай бұрын

lol I just didn’t bolt in the bolt I couldn’t bolt down

@MOTOBLADE 3 ай бұрын

That works too I guess 😂😂

@602North 2 жыл бұрын

Smart!

@MOTOBLADE 2 жыл бұрын

Thanks! Laziness breeds ingenuity. I really didn't want to take the exhaust off again 😂

@bencraig9814 2 жыл бұрын

Were you able to do this without removing the rear master cylinder?

@MOTOBLADE 2 жыл бұрын

Yes. Never touched the rear master cylinder.

@Ouyounderpants1 Жыл бұрын

Could you link where you got the pegs/hardware from please? Thank you!

@brodiebh 11 ай бұрын

My thoughts is putting a ratcheting wrench over the sheared hex head

@MOTOBLADE 2 ай бұрын

EXCELLENT idea. Dang it why didn’t I think of that 😂😂

@markxt2 Ай бұрын

I was just thinking the same thing , what size hex is required please ? Thanks

@dbar3221 Жыл бұрын

It would be nice if you can show step by step for both sides

@MOTOBLADE 2 ай бұрын

There’s no issue putting the pegs on the other side because there is nothing in the way. It’s only the right side that is blocked by the exhaust. Left side goes on in 2 minutes or less.

@mp-qz3pf 8 ай бұрын

Bro I love you brilliant

@MOTOBLADE 8 ай бұрын

Thanks man!

@daveb1242 Жыл бұрын

Surely it’s faster to remove the exhaust

@MOTOBLADE Жыл бұрын

🤣 yeah, sure!

@philweed1603 2 ай бұрын

After cutting Allen keys and all that monkey business, you can have the entire exhaust off and you won’t have to ruin a perfectly fine Allen key.

@MOTOBLADE 2 ай бұрын

To remove the exhaust and get at the head gasket bolts is a pain in the butt. Plus the heat shield removal, plus o2 sensor removal. Allen keys? I have a drawer with hundreds of them. They’re cheap. Way faster and easier to do this. Have had to take the exhaust off before, so I know what it takes. Why I made this video to give people a different option.

@philweed1603 2 ай бұрын

@@MOTOBLADE I get ya. If you have sacrificial Allen keys and a difficult removal of the exhaust this way would be an option. Take care and thanks for the video.

@MOTOBLADE 2 ай бұрын

@@philweed1603 you’re welcome! Yeah if I had an easy to remove exhaust I would take the extra time. But on this bike? Nightmare. Will look for almost any alternative before I have to touch that exhaust again 😂

@acartoon3 9 ай бұрын

Thank you sir😂❤❤❤❤

@MOTOBLADE 9 ай бұрын

You’re welcome. Glad I could help

@aaronschwartz288 10 ай бұрын

We are not liberal except when it comes to thread locker "Loctite" is a quote I'll save for my son 😂

@MOTOBLADE 2 ай бұрын

I’m glad I could impart this wisdom to the next generation 💪🏻🇺🇸😂

@Carlosization1 Жыл бұрын

Regretfully, although it’s a great trick for your Harley, for my eagle scout bobber with Vance Hines grenades there is absolutely no way to put them on without taking the pipes off. If anyone has any ideas, I’m fresh out unless maybe using a shorter screw, but that could compromise the stability.

@codyblount1247 8 ай бұрын

What seat is that?

@ExhaustedSix95 3 ай бұрын

Looks like cc rider, if not you can get one for around 200$ instead if 500$ for lapera or Corbin but probably not as comfy idk mine won't be here until the 24th