Hi All this is my succesfull atempt of fitting Craftride passanger Pegs for 2018-2020 models without removing exhaust!!! Link to get this pegs www.motea.com/en/footpegs-pas... #SupportBikersCommunity krzysztoffr...
Пікірлер: 78
@PumbaaStriking3 жыл бұрын
I'm in similar boat, similar bike as well. 2020 iron in billiard Blue. I'm wanting the pegs my two oldest love riding with my dad and I'm a little jealous. I think you're more experienced, and for 3 hours of an educated guess, I'm so happy I watched this before jumping in. I now know what to prepare for. Thank you, thank you a thousand times, happy riding!
@FreedomRiderB33 жыл бұрын
Hi Caleb it is my pleasure. I am glad that you found this video helpful and soon you will be able to take your children for a spin. My kids love to ride with me. Riding together creates a very unique bond. Ride safe B3 👍
@JamieCosta Жыл бұрын
Dude thanks man! This was the best passenger peg install vid I’ve found. ✌️
@FreedomRiderB3 Жыл бұрын
Thanks , appreciate that
@juancarrasco6598 Жыл бұрын
Thank you boss. You gave me the confidence to do this myself. My son is going to love being dropped off at school on the Iron. Be safe. Keep ‘em down.
@FreedomRiderB3 Жыл бұрын
Thank you Juan. This means a lot to me. Very Inspiring. I am taking my kids with me a lot. It’s so much joy and great opportunity to bond with them by riding together🔥 Ride Safe B3👍🏻
@juanito5to9122 жыл бұрын
You’re freaking awesome man! Thank you so much for your help, I was able to get mine done in about an hour or so. That T40 bit was a bitch to remove but I got it done.
@pushrodfury66443 жыл бұрын
Ha! Exactly the same technique I applied in my video, it makes a lot more sense than removing the exhaust!
@kevinmichael48984 жыл бұрын
Great job man! I’m doing mine really soon and appreciate this video.
@FreedomRiderB34 жыл бұрын
Thanks @Higher Places , I am glad that it was helpful to you. Stay safe 👍
@GoldenbanjoDJ Жыл бұрын
Nice one mate. I'm planning on doing my own installation this week and am glad there are ways to do it without the exhaust removal faff
@hernanbossiviqueira6364 Жыл бұрын
Hey man, you're a lifesaver, I just saw a video of removing the whole exhaust system and I was like Nah.. but found yours, and is giving me a lot of confidence to give it e try with my Iron 2017, it all seems the same. Thanks a million for doing this, and like some other one said, now we know what to expect on a 3-hour job
@FreedomRiderB3 Жыл бұрын
Thank Herman Bossi Viqueira 🙏🏻 I am glad that you found it useful. Let us know how it went. Ride safe B3 and Stay Free
@derekderochie4996 Жыл бұрын
Gave me motivation to do this today. Hopefully it goes smooth!
@jordansanders7102 жыл бұрын
Appreciate the video brother
@hectorvelo30964 жыл бұрын
I am installing mine today, this is incredibly helpful, thank you man
@FreedomRiderB34 жыл бұрын
Héctor Velo thanks 🙏 have fun bro 👍
@Doc_Holiday863 жыл бұрын
Just got my passenger set up today! The wife has been bugging me to ride with, so working on it this weekend!
@FreedomRiderB33 жыл бұрын
That’s great , if you have any questions, simply ask. Thanks for watching. Ride safe and B3🙏
@sgranty02 Жыл бұрын
attempting this tomorrow 🤞
@alexandrubbs2 жыл бұрын
good job man!👍
@FreedomRiderB32 жыл бұрын
Thanks 🙏
@austincain4113 жыл бұрын
Thanks for the video I’m putting mine on tomorrow. What tools would have made this easier and also what star or T bit is that. And what u used to do it? If I have everything at least you used
@cocolosospaintworks52312 жыл бұрын
Very helpful
@plAYLoud...1923 Жыл бұрын
Your should take the peg's from the back and put them on the front 👍
@alej9184 ай бұрын
Thank you for sharing your wisdom. I installed the pegs on my 2020 883 and the install was pretty much like your bike's. However, my rear brake is now locking up. I may need to bleed the brake fluid. Did anyone experience similar issues after moving around the master cylinder?
@eduardomata97142 жыл бұрын
How do you tighten the banjo bolt on the rear brake actuator?
@matrix_byone Жыл бұрын
Tnx!))
@afc-td8zo3 жыл бұрын
doing mine soon , Harley should just put passenger pegs on the bike . Thanks for the video.
@FreedomRiderB33 жыл бұрын
The pleasure is mine afc 1911 👍 thanks. Yes it is a bit annoying that Harley missed that basic feature. Tell us how difficult or easy it was when you done yours 🔧🛠
@Sun-ph3ih4 жыл бұрын
Hey man thanks for making this video, i will install mine soon and make a video as well!!
@FreedomRiderB34 жыл бұрын
Hey Sun you welcome , have s fun mate 👍
@mikes69613 жыл бұрын
Really makes you wonder why the jackasses at HD had to put the master there knowing it would be a pain in the rear to mount passenger pegs. Bikes should come with rear pegs from factory anyway. Just more after the sale sales
@FreedomRiderB33 жыл бұрын
That is pretty poor design I agree. I didn’t hear of any other bike manufacturer that made such a silly concept.( In order to instal passengers pegs you have to take off exhaust pipes ) 🤣🤣 Anyway this are the small things that you have to put up with. If you love to ride that evo sportee🔥
@9w2zek Жыл бұрын
i will do it tomorrow!
@FreedomRiderB3 Жыл бұрын
Did you manage to fit it successfully?
@Daniel-dv2hl3 жыл бұрын
Thanks mate! What is the blue stuff you put on the bolts?
@FreedomRiderB33 жыл бұрын
Its threadlock blue middle strenghth. www.amazon.co.uk/V-Tech-Anaerobic-Thread-Medium-Strength/dp/B0045UQ8GQ/ref=asc_df_B0045UQ8GQ/?tag=googshopuk-21&linkCode=df0&hvadid=226543300693&hvpos=&hvnetw=g&hvrand=17229750621317742194&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9045284&hvtargid=pla-420453367413&psc=1
@franckcornillon17764 жыл бұрын
hey man, thanks for your very good videos like it , which PN is it for pegs ? i like them too :)
@FreedomRiderB34 жыл бұрын
Thanks Franck , here is a link from where I got them www.motea.com/en/footpegs-passenger-for-harley-davidson-sportster-2014-2019-craftride-with-support-in-black-201776-0
@franckcornillon17763 жыл бұрын
FreedomRiderB3 many thanks
@larryavilez80603 жыл бұрын
Appreciate the video did your passengers have a problem putting there feet on the pegs because of your saddle bag?
@FreedomRiderB33 жыл бұрын
Hi Larry. It is possible for a short run but not really safe neither comfortable. When I take a passenger I need to take off the side bag. Thanks for watching I am glad that you find it helpful 👍
@victorpena4242 жыл бұрын
I have a 2021 iron 883 mounting brackets are the same, could I use this same method
@FreedomRiderB32 жыл бұрын
I don’t think that anything changed regarding the frame and rear brake reservoir design. Unless there is something that I am not aware. In my opinion it should work. Ride safe and B3 👍
@rodzyna3 жыл бұрын
Hi Man! Good job, thanks! Just a quick question. Do I need any additional screws? I received just one additional screw and seller told me that remaining four screws are sitting already in bike. Is that true? :)
@FreedomRiderB33 жыл бұрын
Hi rodzyna on left side you have 2 bolts already and two by the rear brake fluid reservoir to the right side. So really you need one bolt extra to use it at the top of the right side Thanks for watching . Any question feel free to ask. Ride safe B3 💪
@rodzyna3 жыл бұрын
@@FreedomRiderB3 Thanks for an explanation. Will see if it's doable for me :D
@charlesmcneil1463 жыл бұрын
Where did you get the kit i ordered one but the right side isnt like that
@FreedomRiderB33 жыл бұрын
Hi the link to the website from which I’ve ordered you will find below the video . Thanks 🙏
@smallgainsaddup46883 жыл бұрын
@5:07 hey man, weird question, would you sell my the brake mount piece?
@FreedomRiderB33 жыл бұрын
Hi @SmallGainsAddUp do you mean the plastic Cover ?
@rdedre47807 ай бұрын
“za dzień za dwa , lecz nie dziś…”
@johnallred31242 жыл бұрын
Does the brake actuator have to be moved, regardless of whether the pipe comes off?
@FreedomRiderB32 жыл бұрын
I had to remove brake fluid reservoir that’s for sure. I didn’t removed anything else though. Except disconnecting it from foot brake control. Hope that helps 👍
@johnallred31242 жыл бұрын
My eyesight s not what it used to be. I think I’ll just get everything out of the way so I can get a light on things.
@taylorduncan92632 жыл бұрын
Would this be the same for a 2021 883??
@FreedomRiderB3 Жыл бұрын
Close to. But Not 100 % sure mate.
@dorianhyde3052 жыл бұрын
Does forward controls interfere with this install at all?
@FreedomRiderB3 Жыл бұрын
I don’t think so.
@dorianhyde305 Жыл бұрын
@@FreedomRiderB3 yeah it was a dumb question. I already installed. Great video.
@mdgiebel3 жыл бұрын
The left side is really close to that swingarm bag. Any issues? I’ve been wanting one of those bags but want my important people on back to have a good footing.
@FreedomRiderB33 жыл бұрын
Yes it is close. Unfortunately I have to take it off when I take a pillion on back . Otherwise ok. Besides on this long rides this passengers pegs gives me another option to change my foot position . Ride safe B3👍
@evelynvanwinkle34703 жыл бұрын
i like that your a christian. im trying to do the rear pegs.. hastle... ugg just put on drag bars ,,i like ours yours better... and strutts. and old seat ,,i bought a new one ,,hate it...
@FreedomRiderB33 жыл бұрын
@Evelyn Van Winkle thanks . Yes it is a bit of a hassle to put this pegs up. But the reward of doing it yourself is greater 👍 Yes I like taller bars as I prefer more relaxed riding style. This cafe style seat is so comfortable love it 🙌 People are selling this worth to try it. It is slightly higher but is soft and it has that back support. Hopefully you will be able to complete your challenge successfully. Any questions just ask. Blessings 🙏
@TheBabyDerp3 жыл бұрын
I don't think the left side is correct. The instructions that came with mine said to remove that cover there, and put the bracket over that line in it's place.
@FreedomRiderB33 жыл бұрын
I decided to keep that cover , as it is handy to have it on. Thanks 🙏
@TheBabyDerp3 жыл бұрын
@@FreedomRiderB3 Is it bad to remove that cover?
@FreedomRiderB33 жыл бұрын
@@TheBabyDerp if you think you wont need it , than remove it. I keep charging point with USB Plug behind it .
@TheBabyDerp3 жыл бұрын
@@FreedomRiderB3 Oh that's good. Only thing I got behind it is a tuner but i keep it up in the battery cover.
@MaddConnekRecordz3 жыл бұрын
The angle could have been better. I have noticed all videos are angled pretty much the same way defeating the purpose of the vid. Visuals are crucial.
@FreedomRiderB33 жыл бұрын
Thx @Hector Ortiz , will work on that 👍
@MaddConnekRecordz3 жыл бұрын
@@FreedomRiderB3 not being negative just constructive criticism. Haven't found one that had the right angle to show the whole process 100% by the time.i found your vid I had already taken the exhaust off....lol but could not see how the two bolt peg would fit with brake master cylinder . That's where I got stuck with light running out on me last night lol. All good. Today is another day........ blessings
@FreedomRiderB33 жыл бұрын
@@MaddConnekRecordz yes bro got your point. I take that as a constructive feedback 👍 and I can see your point mate. Two bolt peg was simple few minutes job. The other one was tricky though. Hopefully you will successfully fit yours. Would be a good idea to get new gaskets each time you remove exhaust. Tell us when you finish and how it went. Blessings 💪
@CommonCowboyTemple3 жыл бұрын
i see a few biblical refernces...? am i seeing right???