I’m not convinced the pin makes huge difference. Others said they used heat to remove it..I think the co2 restrictor holds the biggest increases. Thanks for the vid.

I love the barrel target set up!!! Thanks for the video!

Two of those duel wielding is a force to be reckoned with idgaf good stuff bro bro 💯

Very nice and creative pellet trap brother. Earned my sub.💪🏼

nice job , Its amazing that 1.2s hit that hard 🤨

Your videos keep getting sharper and sharper L🔪 Could have sworn you faded to black in the first segment😁Would love to see you get a reading on her! Maybe a heavier ball?? 🤔 I just checked out your homemade ammo video, Very nice brother!! You should mosdef hook some up and revisit this one. ✌️🙏💯💪

T-M4 mount for the HDR 50 • by Toursekev looks awesome. Have the longer barrel and the P2P HDR 50 Launcher.

Love the target barrow you made

I'd like to see a chrono reading. It appears to be quite powerful.

What ammo are you using for the first test?

Can I please have a link to order the upgrade on Amazon or Aliexpress?

Yep 👍🏻 they are more effective like that.I have done the same to mine.

Great video , can u tell me the laser under the gun which brand it is and where u bought it ? Thanx

They lock tight those pin's in the only way to get them out is heat from a torch or heat gun. All i ever did with mine was change the regulator valve to the 11 joule from the stock 7.5 seems powerful enough for me cracks coconut

you should try rubber ball ammo and steel balls with that mod. they will hurt. mine is an 11j gun I would like to do the 16j mod. what mod was yours?

the screw in the chamber st uck you needed to heatit up first it has loctite 243 on it ...then is comes out you can always order a just that part.

Very odd that the 7.5 joules version had a restrictior disc in it already. I have an og version from three years ago so maybe it's different now but I don't recall a disc...only in the 11j. Try using heat to remove the pin, this should loosen up the locktite. Great build LLC 💯👊👍👍

Hey man did you have trouble with the trigger after this install? My trigger is extremely stiff now..

Have a 22 joules custom job........Bang Bang.....

Nicely done....Go check out the huben gk1 pistol .25 cal.. it's a beast 💪I do want to get the one you're showing but it's just not even close... I spent a pretty penny for it but it's worth it 👌

What screw driver can I use for the TR50? I have 3 screws around the top barrel that won’t budge. I’m trying to take out the valve block and put in a new barrel

Nice power 💥. Congratulations. Now you have a hand-cannon💥👍. Take care and happy shooting my friend 👍😃. Btw , no need to change the pin. You will only get max 1 joule more power with a shorter pin 😉

Hi. Can u tell me the tuning barrel specification and how price is it?

Can you convert one of these beasts into a PCP version that would obviously be hand pump friendly?

Are there any details videos in English to do upgrades on this? I sent mine out for a total of 164 to get it to 20 joules. Not trying to do that again andter 3 months of waiting lol

I'd call that a win under 2 gram balls doing that much damage good show old man

Don't you need to put the chrono head in front of the barrel tip? What am I missing?

👍🏻💯👍🏻

The pan might be penetrated with better ammo and if it was secured and not dangle as the energy displaces when it swings around

It appears you have a "RED" button chrono which only goes up to an fps of 399. So, the reason you may not be getting a velocity reading post mod, is potentially due to the fps exceeding 400 fps. The "Yellow" button version (almost) reads velocities to 700 fps.

It’s reading 400 or above when you get 00.

Would u mind dropping me links to were u got ur upgrade parts ive been considering getting one of these

Good mod. Not the complete factory mod, but then, looks like it isn't required. Solo the valves is enough. I dont think you need the extra barrel. It definitely did had more inertia power as it not only dented the pan but also seemed to have a larger push dent around the strike position. Predator metal pellet is boing to do some real damage up close. Fatal to head shots. But with the light ball you were using...it is going to take a real determined dude to try and get through 3 rounds never less the full six. Bruise like fuk!

He skipped the unscrew part for a reason, THE SCREWS DO NOT COME OFF!

If you put the Chronograph in the same place with a barrel extension you will have no measurements it is just logical serious it takes into account the departure out of canon. It's as if you put it behind you when it is normal put it towards the end with you have extension barrel you will have you are measures xD 😮😅

I am looking at something for home defense. Where I live obtaining guns and licences is not easy. I was looking at this or a crossbow. Would welcome opiions. Thanks!

Where can I buy it, how much does it cost

So the hdr50 and the tr50 take the same upgrades?

U had to heat it up

I have one tr50 modified. 308fps with Devastator 4.8gram. How many joules do you think ?

You need a real chroni to test with, never seen one like that anyway.

I would like to see you Test it in a whole chicken with different ammo

that is 100% self defense gun now :))

How much does it cost,an where to order it

XD 😂 It is logical that you have not had measures you have lengthened the banana barrel so your Chrony must you put it further thought 🤔

Skip the short pin or at very least do it absolutely last. The shorter pin has proven nothing in terms of gains so far. Still amazes me how consistent unmodifed markers perform. Can wait to see your results. Doh! I should finish the video before commenting 😂 Good test. Its another thing i havent tested with is a co2 restrictor. Not bad at all.

Where do you hold the chrono??

I wanted pieces only one .

when it read nothing its over 400fps use heavier balls to get a reading

I had to drill my out, it was not that hard to do.

Throwing rocks for homeprotection is more viable than this

Kool story bro. I’ll stick with my 9mm.

Not convincing, no Joule data, no comparison of the steel plate with 7 Joule

Inferior testing equipment. Not doing what kit suggests and not having ability to work on it without destroying parts . Total fail in my opinion

👍😉