Re-Gluing your Car Door Window Glass that Fell Out

Рет қаралды 75,061

Жыл бұрын

How to Re-Glue Car door Window Glass that Came Loose or Fell Out causing your window to get off track, break or get stuck.
This happened to a Toyota drivers window. I tried to secure it with 100% silicone but it only held for a week. I ended up doing a lot of research and visited an Auto Glass Repair shop to find the correct product and procedure to make the proper factory repair.
If you have a similar car door glass that fell out because the glue dried out, this video should help you to make the repair that will last.
*If this video was a help to you give it a "thumbs up". If you have not already done so, please consider subscribing to this channel.
Disclaimer:
Although I have been following these procedures for many years; I assume no liability for any damage that may occur to any person or property as a result of the information provided in this video. I take necessary precautions (that I am aware of) when working on these projects but that in no way implies or creates any expressed or implied warranty or guarantee of any kind of particular result. Any injury, damage or loss of any kind to anyone or their property or anything related to information in this video is the sole responsibility of the user and not Helping U Online (this video).

Пікірлер: 55

@bluemopar1970 8 күн бұрын

outstanding video! i don't honestly think there is one thing that you missed making this video. you it every point, no questions needed. great job.

@helpinguonline 8 күн бұрын

Thanks for that

@tommymaxfield4216 Ай бұрын

This is exactly the problem that my Honda Civic has. The window has become unglued from the holders shown in this video. I thought, finally! A video that will show exactly what to do. This is after going through a bunch of KZfaq videos that didn't apply (There's a difference between "Manual windows"and "Power windows", my friends!) Not only has the window become unglued, it's become completely free of the window lifters(The clamps/brackets that hold the window and make it raise up and down when you turn the window crank.....Are you with me so far?) I'm a pretty smart dude and I do have a knack for figuring out how to fix things(My Dad was an engineer)And, upon looking at how the mechanism that raises the window up and down works, I determined that the exact placement of the window while gluing it in place was important and if the window wasn't sitting in EXACTLY the right spot, it wasn't going to roll up and correctly. So, I have only one question for everyone out there in KZfaqLand.......How are you supposed to mark where the window is in relation to the holders and where the screws are if it's already separated from them? Just a intelligent thought. So much for finding the video I needed.....

@brandonsalas6552 Жыл бұрын

Honesty is the best policy

@michaelkither2620 8 ай бұрын

Just some more tips...if by chance you have cleaned off the marks where the oe lugs were bonded,there is an small oval access hole in the inner door skin..make sure the front lug is lined up central to the access holewhen in that position as if the lower sliding retainer channel has moved, the sliders may hit the lugs during operating....I would also grease the sliders and lube the vertical running rubber as resistance is often the cause of the lugs pulling off...hope this may help someone

@vajaynunthandass676 Жыл бұрын

In RSA I bought the similar glass for R300=$15 new .Must specializing in car glass fitment to get it right otherwise taking a chance won't work.Must let glue dry /set before trying it out.

@dingdongajay 7 ай бұрын

Great video mate! i wasnt sure how to generally take a window out, and your techniqie of letting thr front drop out of the rails made total sense - woopwoop :)

@helpinguonline 7 ай бұрын

Glad it helped

@madman7923 3 ай бұрын

Thanks so much. I really don't like the idea of letting my car sit in my apt without the window but its probably the smartest thing to do. This video helped me a ton thanks so much.

@helpinguonline 3 ай бұрын

You're welcome!

@MrForeverOnline 7 ай бұрын

Going to try using the Beta 418 sealant. Tried using silicone, but since I have a manual crank handle on one of my older cars it probably needs something stronger as the silicone one just slipped out after a couple weeks

@jamescc2010 Жыл бұрын

I like this way by removing the glass and marked the spots, put the glass back, and put screws in.. No taping of glass, or 2nd person holding. When I did mine, we did not clean the old glue and the clips, just put on Gorilla glue on. Hope it holds well for a while.

@saytencushman3758 Жыл бұрын

I did what you did and it didn't work out for me😂. Now I'm holding my beta seal watching this guy., 🤣

@NITTINID Жыл бұрын

Thank you. I went to my local autoglass shop and they charged me $50 for removing 2 bolts to diagnose the glue was no longer sticking to the channel. He wanted another $80 to take out the glass and re glue it. Do it myself it is.. Thanks a million for the tips. Cheers!

@smh2754 Жыл бұрын

Yea blame the people that don’t work for free and are actually giving you a good deal.

@dagamer667 11 ай бұрын

@@smh2754When you live in America, it's paramount to save money whenever possible. Anytime you spend money, you're that much less prepared in case of an accident or an illness making you unable to work, losing your job, and safety nets to fall back on.

@Mr._Chievous 10 ай бұрын

i'd pay $130 in a heartbeat.

@gaynellspink3963 3 ай бұрын

😅😅😅😅😅😅😅😅😅😅

@hummarstraful 2 ай бұрын

@@Mr._Chievous I'd pay $130, too. But after watching this video I wouldn't trust them to do a top shelf glue job like this. Would fear it coming undone again if I didn't do it myself.

@GeneG-wk2mz 4 ай бұрын

I want to thank you so much I just did this to fix my brother driver window

@helpinguonline 4 ай бұрын

Way to go!

@stuckinmygarage6220 8 ай бұрын

Very good,👍. Spray some silicone - lightly! - in the channels while yr at it. And clear iut any debris blocking little drains.

@tannerhughes6274 Жыл бұрын

Could JB weld work? I’ve been struggling with mine and about to get it done. I’ve tried things as well, but I as left the prior glue in and hoped it would work. Now I’m about to do this exactly and take the window fully out and glue it.

@jquibble Жыл бұрын

This is fantastic information. I've been scouring the interwebs for a while. My clip actually broke off on one side, so I need to get a new clip and glue back on. Any chance you know where to pick up a replacement? Looks like you're rocking around an 06 Camry, that's exactly what mine is, but I can't find any clips that fit that size, only bigger. Thanks for the great info, I will definitely be using this, been trying to figure out what use to glue back on.

@V2k2010 11 ай бұрын

Excellent information Sir. You had exactly what i was looking for!

@helpinguonline 11 ай бұрын

Glad it was helpful!

@raymondthompson4222 Жыл бұрын

Echo srm 225 run great for 20-30 minutes and then start to run rough and lost power,after a few hours later it run great again for 20-30 minutes and then start to run rough and lost power again.

@glassman3333 Жыл бұрын

I like turtles

@saytencushman3758 Жыл бұрын

So you were able to glue the clips onto the window and then you put the window in the door? Don't the clips prevent it from going back in the door because it's such a tight fit? And are the clips suppose to be snug against the glass? Mine clips seem like there way wider then the glass is thick?

@helpinguonline Жыл бұрын

The glass goes in there fine because the panel with the inside seal is removed to do that job

@pranayanagar675 9 ай бұрын

Good information...a practical query 😂

@anon1066 Жыл бұрын

Any updates on how this is holding up? Mine fell off back in October and I’ve just kinda left it rolled up since. The weather is starting to warm up and I’ll do this soon. I miss my window so bad.

@helpinguonline Жыл бұрын

Still working fine and holding strong.

@anon1066 Жыл бұрын

@@helpinguonline thank you. This video is extremely helpful :)

@Countryboylife228 3 ай бұрын

That’s not the correct glue for that it will work, but would work better if you use a beta seal 428+ it has primer built-in that way it sticks better to clean glass

@pranayanagar675 9 ай бұрын

I'm from India have corolla 2004 😂 broke right side door glass...couldn't get an original glass but somehow a local stuff and did it myself....when I press the auto mode while the glaas goes up it just hits the top and come down itself....can you diagnose the problem...

@luisduar573 8 ай бұрын

You have to make the relearn, look for a video on KZfaq how to do it it's very easy

@mrez1991 Ай бұрын

Can you use gorilla glue

@CR8VE Ай бұрын

My man If you were wrong on the first video why would you do an update with a second video. Now he's going to listen to you. 😂 Good luck man I don't glue windows I'm mount them

@pranayanagar675 9 ай бұрын

Can someone reply....if the glass is fully broken then how to decide the exact location of clips to be glued on a new glass....

@gregorsamsa1364 8 ай бұрын

New glass should come with clips already glued in place

@chuckaaron2014 6 ай бұрын

Glass comes with new clips already on

@JayceeCordova 4 ай бұрын

I just did this yesterday, I basically pull most stuff out until I get to the window part and unscrew the fastener holding the broken window glass. I clean it off and screw it back. Then I slide the new glass down to the fastener, but have to redo it all again because I forgot the glue. P.S. My glass didnt come with the fastener.