In this tutorial I show you how to create big authentic metal props, like this master sword, by #electroplating your 3d prints. #3dprinting and metal plating combined will create convincing objects for you prop collection or the next comic con. #cosplay
💚 Support me 💚
If you like the stuff that I'm doing you can buy me a coffee:
www.buymeacoffee.com/hen3drik
This is the stuff I used for electroforming/electroplating in this video.
Chemicals for the prints:
🛒 Copper Anode: amzn.to/42XdwZS *
🛒 Bright Copper Electrolyte: amzn.to/3zk2S1F *
🛒 Conductive Copper Paint amzn.to/47cpbpR *
🛒 Palladium Electrolyte amzn.to/3DDr8hD *
Optional:
🛒 Gold Electrolyte amzn.to/44NNwRp *
🛒 GRAPHIT Paint amzn.to/3YtPZhD *
🛒 Galvanic Degreaser amzn.to/3rV4v5r *
I used this printer:
🛒 ELEGOO Saturn 2 8K amzn.to/44Js3Ja *
▶ www.elegoo.com/products/elego...
(*) These links are affiliate links. From time to time, I recommend products I know well and use, and, as a result, I may receive a commision if you purchase them using the affiliate link. Puchasig from affiliate links is at no extra cost to you.
▶ Chapters
00:00 Introduction
00:28 Creating and smoothing the 3D Print
02:45 Creating a plating tank from acrylic glass
05:33 Making 3D prints conductive
05:58 Preparation of an electroplating bath for 3D prints
07:05 Polishing 3D Prints
09:30 Nickel Plating + Gold Plating the 3D prints
11:14 Candy painting the handle and cross bar
11:43 DIY braided strap and assembly of the sword
▶ For the galvanic bath:
* a container
* Acidic copper electrolyte
* Nickel electrolyte
* one or two copper anodes
* banana plug & alligator clips
▶ You may need:
* Degreaser
* Distilled water
* galvanic brush + pen
* Palladium electrolyte
* Gold electrolyte
Have fun. Try it. 🧡
▶ Good Resources
‪@Darkwingdad‬ : Smoothing +Sanding Channel with very nice tipps
▶ More Stuff from me
Helmets Tutorial #1: • Electroplating 3D Prin...
Swords Tutorial #1: • Electroplating 3D Prin...