Yes I am. E.P. Dollard, C.P. Steinmetz, N Tesla, J.J. Tomson, M. Faraday and many more have inspired me.

@@MasterIvo oh god help you if you purchased dollards books hahaha

​@@patrickwatkins7572 All the Dollard materials I've read are fascinating and informative. Both in terms of books and essays, that are scattered about the internet.

Glad I can inspire!

Same situation for me. I am trying to study basic electronics to better understand all these videos. Even so, I am fascinating about "Tesla's stuff" and I pretend to learn and build this kind of generators. Ivo, how your circuit can be compared with Don Smith's? Thank you and congratulations for your research!

better not compare it to Don Smith :)

Remember: Time and Space are only 2 dimensions. Then we have counter space and counter time. I will probably disappear sooner into a higher octave ;)

@@MasterIvo Never thought of that, (counter space/time) I guess everything has an opposite.

yes, and nature always want to balance itself

@@MasterIvo i have to agree , funny thing is once all is balanced then what???? how to return to imbalance again.

well, I intend to create an impbalance with very low power (L1 L2 coupled producing impulses). the impulse will discharge a capacitor which is a unbalance. nature fills it back up. this inflow of extermal aether is current.

Ivo has his feeling of that Master, indeed. If I were you who definitely had his attention, Sir I would rather beg Mr Ivo to grow a little one of a Tesla Tower for some real money all of us would have to solicit in a while.

Would you call a real implementation on these findings today, Sir?

Sounds great!

@ yuri, I intend to use this primary impulsed coil, as a capacitor plate. the other secondary coil, will also be a capacitor plate, which will have a high voltage DC offset. This way I can discharge the capacitor using the impulses. In short: More experiments, to learn how the dielectric field behaves, and benefit from it

weak point of tesla coil FE with ground wire, is the high impedance of the secondary.... using just a primary too suck electrons off the earth is a facinating posibility.... although no reason it cant be done with a spark gap, much higher power potential.... although i would use transistors too

Thanks Miguel

Thanks Claudio

My pleasure!

Thank you very much! I keep on working until I understand it fully, so I can share it with all

Actually that is easy. Just use the same parts, and the same signal, and they switch simultaneously. Right now I'm only switching High side. If I would also switch lowside (as in a half bridge circuit), it would not be simultaneously, as that would create a shortcut)

@@MasterIvo I see how your circuit is set up now, thanks. I think going over 2-3 you will run into different problems, especially if switching fast, but for your setup I think it is.a great solution. :-)

@@reiyuki thanks, now I need to add L3, and give it a hv negative dc offset, so it makes a capacitor together with impulsed L2

Thanks Scott!

@@MasterIvo hello master Ivo. I’m trying to build something using pancake coils and I was wondering in I could PM you with just a brief question. Thank you friend

Since you didn't reply to my message, I've deleted it.

correction: potential differences between winding is big.

@@MasterIvo it should be half of potential that would normally occur if coil is wound by single wire. Because second wire is connected to first at end of it, half of total potential per turn in each of 2 wires?

@@darkobul1 yes, And if resonant those voltage can go up to thousands of volts

@@MasterIvo Nikola Tesla used them in few patents and was using them with millions of volts. Too bad I can't copy image of quote but Tesla bragged about it as very safe for such high potentials which is unheard of for ordinary transformers which became dangerous at those potential differences and often can explode catastophicaly. Obviously for such potential of millions of volts he used large coil that we probably can see in photos of his Lab. I am curious to see your experiments on this coils and what properties you find. I was thinking also to use mosfets in similar way and I am glad to see it works for you.

Thank you too!

Go for it! And please post your results on KZfaq. Thanks!

@@MasterIvo Will do, don't know why am so nervous lol

Maybe it's the life force flowing through you :)

@@MasterIvo hehehehe

Thank you! Cheers!

Спасибо Anton

thanks, IRF840 has max 20V on the gate. and gate threshold is 10V, guess this is not the problem. it can handle 500V between drain and source, I suspect, your impulses are more than 500V and this is what kills them

yep, not the best, but these are only for test. Got these to work over 700v spike at slower pulse rate (

yes I worked it. Am checking all the current polarities of the coils right now, to create a feedback loop, with L3 in the middle (LMD resonant)

Very good, look forward your solution. I've looked on your web-site and oshwlab links... please, is it possible to get a part number, value and manufacturer of just 1 coil tuning capacitor... I'm trying to find a US supplier, wanted to make sure I would be ordering the right capacitor type. Are they polypropylene metalized or film? Thank you.

wima fkp1 1nf 2000V or wima mkp10 10nf 2000v I believe metalized see datasheet. other caps could be used

Will you post you results on KZfaq?

@@MasterIvo I'll send them to you , but I've got some ways to go . Still trying to build my coils and a wife and four kids are doing their best to distract me. But I will send details as I go. I like this open knowledge idea. if i get my plans legible I'll send them through

your welcome to do as you wish with anything I send you. It will be a little while though.

Take your time. we'll get there.

and thank you too brother!

I think a conical coil would probably produce the same results. Not sure, would need to test to confirm. These tests are only for the bigger experiment that I am working up to. it will have 4 coils, and the electric energy will be looped.

Good questions. simply adding a series capacitor doesn't always work, as it needs to charge AND discharge, so that only works with AC signals. calculations do not always give the same results in reality. For example the Probe measuring the frequency can influence the capacity. Also, a bifilar coil has series AND parallel capacity, which makes calculations and modeling a little bit tricky. Yes capacity and inductance determine the resonant frequency, So why equal mass? To be honest I am not sure why. Eric Dollard also stated, it was probably not equal mass but equal capacity as it refers to the dielectric field. What I think, but still have not confirmed, is that we need equal mass, because we are dealing not only with resonance but also with electro static induction. let me explain. Yes L2 and L3 are the primary and secondary coils (april 2019 radiant power circuit video) L2 is series resonant L3 is parallel resonant. When L2 and L3 are tuned to the higher LMD resonance, the voltage maximums are out of phase. so far, equal mass isn't needed. but now we introduce the impulses on L2. L2 and L3 form the plates of a capacitor, which is charged up by the positive dc offset of L2. This L2 L3 coil capacitor, is discharged by the impulses. this rapid (disruptive) discharge produces a Longitudinal wave. for this longitudinal wave to interact we need equal mass. Then we can see the effects of this longitudinal wave, else it will not interact. Again, I have not proven this. It is still an Idea. It is based on Tesla's writtings. the quarter wave length, is mysterious to me as well. I feel it only relates to straight AM radio antenna's that are grounded on one side. By using a quarter wave length, the top of the antenna will have maximum signal amplitude, which makes it like a wip. This maximizes the radio signal, as the energy is lost from the antenna, it wips up the Aether, giving lossy transverse waves So for a coil this does not make any sense. A bifilar coil can store much more energy due to its mutual inductance, and the increased voltage difference between the windings that charge up the capacitance. So I bet a bifilar coil is a bad antenna. But you could extend the center of the resonant coil, again with a quarter wave rod antenna, and place a capacity ball on top, like Tesla did. then the high voltage of the resonant coil can escape the coil, into the ball capacity. And if there are impulses imposed on them, it would make a good antenna. But not of transverse waves, but longitudinal waves that are not lossy. I hope this helps.

Dear Ivo: Thank you for the explanation. It is quite clear to me now as it makes a whole lot of sense the way you explained. I am also an Electrical/Electronics Engineer, graduated for US university in Texas. My studies are somehow more on finding a relationship between Electromagnetic forces and gravity. I did make a disc 3" dia, and it floats 1ft above the ground; I also made a field generator (using electromagnetic waves) that affects every material regardless of its atomic nature; meaning if I put a pencil in the field generator, it will spin the pencil; a rod, or any material, the field has gravity like effect; just as gravity pulls back every object tossed up in the air (not exceeding the escape velocity) I have been working for last 16 year on increasing the field effect of my gravity field generator to no remarkable success so far. Now recently I revisited my old project and started applying new techniques; one of which is resonating the solenoid in that generator. Any way, It is very fascinating watching your videos with clear demonstration, huge amount of experience and knowledge, and your unconditional sharing; perhaps that is why I am proud to be a donor to support your mission. You are a true Engineer and a lovely human being. Keep up your work and let your work shine your devotion. Regards.

Thank you thats is good to hear. Very fascinating what you are doing. from what I learned of "Electricity and matter" by JJ Thomson, all inertia is stored in the bound aether, the aether IS inertia. I would love to talk more and share Ideas. If I'm correct I have your email from your donation, I'll send you a message.

Not completely sure. the pulse frequency os equal to L1 resonant frequency. must have its harmonics I guess

Will do soon, first I need to make the coil capacitor of L2 and L3

What are radiant effects?

good question @Sillybears, I am researching that. So far I have seen several effects from using Impulses, which are: health benefit, ionising beta radiation and resonant power.

Ken Wheelers work sparked my research in 2016. It is fascinating. But it is not based on electric experiments, rather in permanent magnetic fields. I am not familiar with the model, but I do feel the universe is electric, meaning all are fields.

@@MasterIvo what is the difference between his permanent magnet concepts and your experiments? www.thunderbolts.info/wp/2021/02/23/the-long-farewell-to-the-big-bang-model-of-cosmology/

yes, but it also depends on the plate distance. I believe it is confirmed the B2 uses high voltage on its wings. The real magic only happens when that high voltage field discharges. they never tell you that, but it is in T. Townsends lab notes that I read.

@@MasterIvo very, very interesting. That seems to ring a bell actually... Hmm, do you have a link handy to what you read in that regard?

@@cryptonein I think I found it on rexreasearch

@@MasterIvo , Love your work! Very precise compared to my switching. Yes the plate distance controls the heat exchange capacitance. A rule of thumb I've discovered for working low seed energy propagating plasma containment is a space distance of about 1 7/8 inches (7.3025 centimeters). I noticed a self adjusting resonating effect propagating heat with open air capacitance coils. My first discovery of this duplicatable effect was with alcohol burners constructed from aluminum soft drink cans. (known as penny burners) With this spacing I could add water to the alcohol for a mixture of a little less than 40 percent pure alcohol to 60 percent tap water. This distance between the parabolic shapes got the longest burn times from the fueled plasma of up to 20 minutes burn time per 1 ounce mixture. I've found this spacing to actually be an electrical conversion with open air non Ferris capacitance values consuming all the fuel. I love working with asymmetrical electric motive conversions. I've worked with radius bifilar pancake coils up to 30 cm with this spacing adding a little parabolic cup with this spacing distance. My unproven theory is that ambient nitrogen aether element is what Nikola Tesla found to resonate with? I believe he learned to manipulate localized asymmetrical (Parametric resonating) cycled imbalance of atmospheric nitrogen densities creating an atmospheric battery/capacitor. He controlled the discharge rate by creating variable ozone spark chambers. The main fuel that facilitates the at ground level preparations was probably anhydrous ammonia and a natural flowing underground water stream. A very inexpensive fuel consumption for the energy that's harnessed. The RF transmissions of usable electricity from there is well known. With his system depending where the ground potential was tapped it's possible with the receiver to facilitate AC or DC Electrical Power employment delivery. My favorite is working with out of phase cold energy with high potential and using resistance to bring it back in phase to produce very hot energy with very little seed energy input. You are on the path to realizing very high Q factors. It's not a free lunch however it's amazing to do more with less when tapping into the bipolar parametric resonance field. Cheers

The inductive spike is a resonant voltage half wave. It can do several things. Can you ask the question again in other words?

@@MasterIvo I understand that resonant is a complete balanced circuit fine tuning is necessary . Do coils have north and south poles toward magnetic field or does it become a undirected field. like ac that require more pushing volts to create polars.

If inductive spike is redirected to coil will it produce a higher magnetic field is question also.

The impulse from L1 creates an amplification of the magnetic field of L2. resonance (full cycle) has 4 transformations between voltage and current, thus the current has both polarities. This means the magnetic field is alternating. so the polarities are flipping

@@MasterIvo love it Bro peace back too studies

Open source for all :)

SoNotGoodForMotorsBecauseTheHighFrequencyMeltsTheIron.MaybeMotorsCanBeMadeWithoutIron,OnlyCopperWinding.

define which radiation. for dielectric induction, capacity and voltage is needed, so high surface area and high voltage. this would be best: the outer mantle of silver plated copper coax, with Teflon coating. or indeed, airco tubing

meer inzicht in de werking van Aether field dynamics

Interesting idea

and then the voltage goes lower ;)

@@MasterIvo it seems it always seeks entropy. 😥 Hahahaha

ow this is just a simple test, the full setup will come later. The idea is to implode the field, that creates an external inflow to fill the vacuum. We'll see :)

@@MasterIvo count me in if you need Guinea pig for testing the mind elevating effect

already successfully tested it (see ascention seat). It needs further improvement, but that's for later. First things first

yes, but I can also get it down, by close coupling L1 and L2!

@@MasterIvo between the two ways you should be able to get that impressively efficient for pulse production

indeed. It's amazing

Probably because the youtube algorithm only promotes my channel if I produce a video every 2 weeks. I'm not about quantity...

part of advanced circuit based on this kzfaq.info/get/bejne/Z6ycnZSaleC1XWw.html

Pintek HVP-08

$1 worth of resistors works perfectly

@@patrickwatkins7572 yes thanks patrick but i did make one and as its high voltage with large capacitance i just don’t feel confident in it . I have ummed and aaaard a lot but after a recent jolt from a mates tazer i feel i never want that feeling again so i feel just to uncomfortable about it. 👍🏻

Maybe i get a cheaper 2000 volt probe and add some resistors to the probes end ! Would that work? I am thinking it should but how would i know if my reading are true ? I was thinking run a test at 2000v and then use estimated resistors to divided it in half to 1000v onthe scope but would that be linear and still half as i come up to 4000v on the test point ?

Hi Maribel

what is it about?

Regarding your initial circuit, I keep blowing midgets or not getting results, may I ask if drain of mosfet is connted to positive 12v battery then what is the negative side of battery connected to? Same question is using dc to dc converter? Also in your newer high-side circuit from the diagram I can’t tell what you connect the mosfet drain to?? Lastly I have many gate drivers and mosfets and I read the spec sheets over and over but I’m at a loss. To understand how to match a gate driver to mosfet? Any help would be greatly appreciated, happy to send you a private email and donate as well

***not magnets I mean mosfets, sorry

the battery is only powering the gate driver circuit(including buck converter). the mosfet is connected to a separate power supply, if the drain is positive, than the source is connected to the L1 coil, amd the L1 coil (other side of the coil) is connected to the negative. The battery is a separate power supply circuit! its negative is the mosfet source. hope this helps. each mosfet type prefers it own Vgs, this voltage between gate and source makes it switch. some mosfets need 15V Vgs, others need 10v Vgs others 20Vgs. the gate driver needs to be able to supply this voltage. that is supplied by the battery (in my circuit).

Yes but how do you power the mosfet drain? There is only one connecting point, so if the separate power source is a battery or dc converter or bench, where do you connect the other negative lead? I’m confused beacuse any separate power supply has at least 2 wires negative and positive but the mosfet drain only has one pin?

thanks for the the titles. It is becoming clear KZfaq is actively censoring. I can't see those previous posts with links. Strange and disturbing.

@@MasterIvo Video from Georgia must be at least 20 years old. I have another video which is a part of this video, but a little better quality. It looks like original inventor of Kapagen is another man and it is not Kapanadze. Because I have some photos from same meeting and on one of them is Kapanadze looks quite young.

strange.. I didnt do it. youtube is going crazy

I can't see that one neither. Can you copy paste the video title, then I'll look it up

kzfaq.info/get/bejne/iMqqrZZlrLTPqJs.html is this it?

​@@MasterIvo Yes this is it. You success. It look like if somebody is persistent enough they stop deleting posts. I am curious if this work. With usual coil it doesn't work. I tested it. There is no resonance, just back emf. But if bifilar coil has a capacitance then it is possible. So I am curious could you test it, because you already have all components made. In monofilar/ordinary coil there is effect of increasing brightness of light bulb, but this is because of back emf of coil. But with brightness comes also bigger power drain. Actually bemf is one part of resonance (coil part) second part is condenser part. Coil which is behaving also as condenser is a device which could be an answer. So at right frequency input we expect drop of input power by same brightness of light bulb.

yes coil that is a capacitor is what I am working on. a capacitor has 2 plates. for the plates I use 2 bifilar pancake coils. I use 3 coils (radiant power circuit of april 2019) to create a feedback loop. L2 and L3 ar the capacitor plates. L3 is the middle coil of the 3 coil stack

@@MasterIvo I saw your work. It is nice and well documented. Congratulation on that. So did you test that circuit of that boy Daniel? If we connect a simple 12V light bulb on square DC signal it lit. If we connect a coil parallel to it, light bulb increase brightness. But power increase too. No matter what is the frequency of input. I tested it. There is a claim if connect a bifilar coil instead of ordinary coil comes to resonance at right frequency and as consequence power on input drop instead of increase. This is very simple test. What are you doing is far more complicated. So are you capable of this simple test or should I made a bifilar coil and test it myself?

because flybacks have much higher impedance and capacitance and also resistance lol.... its all bad from flybacks... i want too see IVO get serious with fast potential, not just high potential

Not only fast, also cheap, low power cost

@@MasterIvo can you plz elaborate because I can't see how the coil setup could be cheaper than a 9 volt battery with a few flybacks

take a look at kzfaq.info/get/bejne/Z6ycnZSaleC1XWw.html from 15:32 when L1 and L2 are close coupled, the power required drops to very low levels. I am working on a more advanced circuit based on that video.

i have reached insane efficiencies with closed loop transformer systems, - in the order of 99% with MOT's, using superimposed waveforms, but i really see no way forwards without using open system thermodynamics