No video
Homelite blower ONLY RUNS ON CHOKE - EASY DIY
Рет қаралды 592
Күн бұрынThis blower slowly got worse, and eventually stopped working decently. The original owner thought it was worn out but when I looked, the piston and cylinder looked great. A carb rebuild and tune and it's back to working great!
Thanks for watching! If this helped, SUBSCRIBE! It's free and it helps us make more (and better) videos. I do my best to respond to all comments. Thanks
@bigsonslawncare 3 ай бұрын
Man Bill every time I see Homelite it brings back fun memories of simple equipment! 😊
@GuysPlayingWithTools 3 ай бұрын
I am keeping this one for a while, nothing like a tool that just works.
@rogermcdonald1607 3 ай бұрын
Bill you changed shirts! That is a nice little blower. Easy fix, and not a ton of money invested. Thanks for the video! ✌🎥🇺🇸
@GuysPlayingWithTools 3 ай бұрын
I change shirts at least twice a day when working outside, but I usually stick with the "logo shirts" so nobody can tell.(I have 10 of them) This is my new garage blower, people keep buying my garage blowers and I didn't have one at the moment. LOL
@dfields9511 3 ай бұрын
funny thing is I just fix homelite blower I picked off side of road (different model), that had a new primer already, All I had todo was replace fuel lines that disintegrated, clean fuel filter, and adjust the Carb. the carb wasn't dirty, I bet what happened was they saw it had a bad primer, but after they fixed that discovered the bad fuel lines and then just threw it to the curb. Now that I fixed it its listed for sale. great rebuild on that carb. I typically when a carb needs a rebuild just replace it with a chinese one, its likely the same one that's already in it
@GuysPlayingWithTools 3 ай бұрын
You couldn't imagine how often I hear the words "it just needs a primer bulb" 🤣What do you get for them in your neck of the woods? I usually sell good ones like this for around $50 here in Dallas
@dfields9511 3 ай бұрын
@@GuysPlayingWithTools I haven’t sold it yet , I have it listed for 45 since it’s an older model. I am in the ATL
@GuysPlayingWithTools 3 ай бұрын
@dfields9511 If I get an offer for $45, I would take it for one of these. They are only $100 or so new.
@lewiemcneely9143 3 ай бұрын
Homlite made/makes? some good stuff. I always got along good with it and you did too. I always try and adjust it 1st but if that won't fix it I get a kit. 72 and sunny here and mowing directly. Stay COOL, Pal!
@GuysPlayingWithTools 3 ай бұрын
I dork around with them quite a bit before I make a video too. I am with you, they are the best thing you will find unless you double the cost.
@lewiemcneely9143 3 ай бұрын
@@GuysPlayingWithTools Mine are old but run good. I don't need shiny to be happy. Just whatever works. Likie the old saying' It's good enough for who owns it'!
@GuysPlayingWithTools 3 ай бұрын
@lewiemcneely9143 I feel ya. I ran a $79 walmart weedeater for 17 or 18 years
@lewiemcneely9143 3 ай бұрын
@@GuysPlayingWithTools We used a couple of free Featherlites for no telling how lomg. I didn't have carb tools so I used a Deamel with a burr and ground down the carb so's I could adjust it with needlenose. They still worked when I gave them to our son-in-law. No use getting hi-dollar when FREE works just as good!
@GuysPlayingWithTools 3 ай бұрын
@@lewiemcneely9143 Once upon a time I used a dremel and a cutting bit the create a flathead on mine, it needed more than an adjustment though and I was young and dumb so I ended up replacing it. Thinking back on how hard it was to figure out when I was a rookie is one of the motivations for the channel.
@thinkingimpaired5663 3 ай бұрын
I just happen to have a homelite blower
@GuysPlayingWithTools 3 ай бұрын
I tell people all the time that they are the best bargain blower on the market, they blow strong and if they are maintained they will work for years and years. I am going to use this as the new shop blower. 👍
@jamesatkinson5027 3 ай бұрын
I have exact same blower exact same problem full choke to run eventually now won't start at all now I'm going to try this then I was assuming a cleaning would fix it or maybe not
@GuysPlayingWithTools 3 ай бұрын
You will need to replace the diaphragms for sure in this case but, as you saw, it's pretty easy and usually works great. If you haven't tried to adjust anything since it started having problems, then you shouldn't have to change any of the settings
@wwmmnicole 20 сағат бұрын
Hi! I need your help!!! I have a HOMELITE leaf blower/vac exactly like this one for 5 years and I seldom use it. It was still running last November, but it couldn't start now. I haven't changed the fuel for the past 2 years. So, I started from changing the fuel to "Truefuel" suggested by Lowes. The fuel line still looks clean (so I didn't replace it). I replaced the carburetor (complete set purchased from Amazon for 19.99), and spark plug. After doing all of these, the blower still doesn't work! Is there anything that could possibly prevent it from starting? PLZ reply (crying in the corner
@GuysPlayingWithTools 16 сағат бұрын
@wwmmnicole No worries, it will live again. I have a 1/2 finished video that I will get back on this afternoon so it can release in the next day or so. In the mean time: Check the fuel lines and make sure they aren't backwards Check the gasket between the carb and motor, Make sure the holes ALL align Replace the spark plug, champion RJ7YC I have a tuning vid, use it to tune the new carb
@jamesatkinson5027 3 ай бұрын
One more question what causes the diaphragm to go bad just natural wear or all dirt rust and wear mine is only 3 yrs old and no go this year
@GuysPlayingWithTools 3 ай бұрын
You can ask more than one LOL. Seriously though... The ethanol in modern fuel is not bad, until it sits for a while, then it's really bad. If you leave fuel in the machine over the winter, or for any extended time, it will reach a point where it starts damaging the gaskets. My golden rule is, if it's going to sit for more than a month or so, I drain the fuel and run it until it stalls. 👍
@jamesatkinson5027 3 ай бұрын
Mine has no throttle in the handle it only has control on the carburator itself that is idle or full throttle ahead that one you just worked in looked to have a finger trigger did it
@GuysPlayingWithTools 3 ай бұрын
This one did have the finger trigger. I see blowers like yours now and then. I prefer the trigger for myself, but it's because I have a lot of "down time" walking around when I do the yard. The ones without the trigger are a bit easier to work on since there is no linkage. 👍
@jamesatkinson5027 3 ай бұрын
Mine did sit all winter I did drain tank but did not run the carb out I do use no ethenol fuel for my mix and for my mower engines
@GuysPlayingWithTools 3 ай бұрын
@jamesatkinson5027 So do I Ethanol is "ok" until it gets old. The easy thing to do is toss a cheap Amazon carb on, the fun thing to do is get a kit and rebuild it. Let me know how it goes 👍
Leon's Chainsaw Parts & Repair
Рет қаралды 5 М.
Creative Hacker
Рет қаралды 6 МЛН