How much did it cost all in??

www.amazon.com/Carbide-Sandblasting-Sandblaster-Abrasive-Replacement/dp/B08QN1QSGP/ref=sr_1_57_sspa?dchild=1&keywords=sandblaster%2Bnozzle&qid=1610607075&sr=8-57-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQU5BMEZPRDFNRVU1JmVuY3J5cHRlZElkPUEwOTQ3MDM3NVZIRkwwMko3VUhEJmVuY3J5cHRlZEFkSWQ9QTAzNTk5NjgzTlpUQVRUT05MU0M4JndpZGdldE5hbWU9c3BfYnRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 this sandblaster boron carbide really helped me a lot, share with you,hope it can be helpful to u!

wff

lm

Its AC stick welder and its about 20yo. Its hard to work with it . Difficult to start sometimes need many hits sometimes stop and more but ok its work..... btw I will buy a new dc stick welder soon. Thanks for your comment dude!

@@MaverickProjectsOfficial I've got my dad's old buzz box. I always liked welding with it. It's a Montgomery ward, so that tells ya how old it is. This one has a slide controller for the amperage, so you can put it were you want. I like that feature. Happy building

Ac welders its forever .... Dc welder is recyclable!!

You can use 6010 for root pass and 7018 to fill

E-7018 works fine for this kind of projects

I think its no difference between 6/10/16 amp fuse, its the same size only wire inside have different diameter for right amp :)

@@pawe3030 A to może po Polsku napiszę bo chyba krajany my sa:,-) a na jak długo wystarcza to piaskowanie taka dysza? Nie zużywa się szybko?

@@TheZafek Sądzę że kilkanaście roboczogodzin. Takie bezpieczniki grosze kosztują więc to żaden problem wymienić nawet co tydzień :)

Thank you !

Its works nice 6-8 bar . My compressor is 200lt.

Hi What kind of compressor i could use to make a good sandblasting at least? My father has a 100 l but its only 16m3 /hour that is to say a 266 L / min Do you think it would be ok ?? Thanks again

@@MaverickProjectsOfficial 200lt. Its huge and good good to use i think. I have a plan to buy 50lt. With 8bar its that ok?

Yes right! In this video I used AC welder!!

@@MaverickProjectsOfficial Would you tell me which brand? A part number would be so helpful!

Thank you !!! Yes and its works fine. You will see it in my next projects if I use the sandblaster.

@@MaverickProjectsOfficial Yep. I keep watching. That nozzle is a great tip! Thanks

Im using 2hp and 200lt air compressor.

I am pretty sure that the supply disconnect is in the front on the right. You notice he put a "T" fitting on the front to pressurize the tank and ran a hose from there to the bottom "T" to pick up the sand and ran the discharge hose out the back between the wheels. It looks like the discharge hose is coiled up on top in the very last of the video. I would use a male quick-disconnect so I could just use the same hoses i use for everything else in the shop. The only thing I would change is to put the shut off valve on the quick disconnect side so I don't get the spew of air when you disconnect. Also I would put a 20 micron water trap on the supply side. You can pick up one for about 20 bucks at home depot or sears., sorry lowes. Damp sand doesn't work well at all. I also use play sand and run it through a screen. I made a screen funnel and placed it in the top. It is a whole lot cheaper than grit and easy to re-use, just filter it again. Hope this helps. If I am wrong, please feel to correct me. Please be sure to use a respirator and face mask. The sand dust is just as bad for your lungs as asbestos. I just buy the paper suite at HD and when done throw it away so I don't get sand dust everywhere. When done just blow down and remove the suit. that way you don't breathe the dust when you take your mask off.

@@imaverick2000 thank you your valuable reply..I will look into it.....thank a lot

Nema plina unutra halooo

Привет

@@user-jt7lt5xt3u Привет

8003273574 price 12000