Homemade Shredder Recycles Old Phones With Steel Blades

Homemade Shredder Recycles Old Phones With Steel Blades | SHREDII 4.0

Рет қаралды 282,166

Күн бұрын

BUY A SHREDII 5.0 KIT: actionbox.ca/products/shredii-5
Don't forget to subscribe :)
Mini DIY shredders are now a reality with our latest SHREDII design. This homemade shredder was tested against wood, plastic, aluminum, steel, and even the indestructible Nokia 3310. This shredder is a great addition to our DIY machine shop, and we use it primarily for recycling 3D prints by taking the granules that come out of the DIY shredder and using them with INJEKTO, our DIY injection molding machine, to create new plastic injected parts.
This SHREDII is designed for use with Nema 34 motors, and in this video we also tested it with more powerful servo motors that we had left over from our DIY CNC and DIY wire EDM machine videos.
We hope this DIY shredder will enable those with minor shredding requirements to continue moving forward with their recycling projects.
GIVEAWAY: Winners will be announced on February 19, 2023 on our community page. Be sure to subscribe so you don't miss out!
Ways To Support Our Channel:
Become A Member and Enjoy Perks: / @actionbox
Buy Merchandise: actionbox.ca/collections/merc...
Follow Us On Instagram: / action.box
Visit Our Website: www.actionbox.ca
Check out some of our latest machine builds:
We built a Tiny Injection Molding Machine (INJEKTO 2.0)
• Homemade Plastic Injec...
We built a Wire EDM
• How We Made A Wire EDM...
We built a CNC Machine (DIY CNC)
• Homemade CNC Machine! ...
We built a Plastic Injection Machine
• Homemade Plastic Injec...
We built an EDM Sinker
• Homemade EDM Sinker
We built a CNC Router
• HOMEMADE CNC ROUTER.
#homemade #machineshop #DIY #CNC #homeshop #mill #machine #engineering #shredder #recycling #recycle #shredded #AirPods #nokia3310 #nokia #indestructible #steel #science #3dprinting #3dprinter #3dprint #3dprinted #mrbeast

Пікірлер: 600

@charlie_lee_rhee8866 Жыл бұрын

My man single-handedly bringing the modern industrial revolution onto the desktop

@ActionBOX Жыл бұрын

Hahaha, thanks for your support 😃, glad you appreciate what we do 😊

@angusadolpho6756 Жыл бұрын

Thank you

@speakerbasstester1639 10 ай бұрын

@@ActionBOX can u show me how to make this? Need it to shred IC chips

@jerbear7952 7 ай бұрын

Hardly single handedly. He is standing on the shoulders of many many giants. As well as walking on their backs by failing to acknowledge the designs he is claiming as his own.

@pm5906 3 ай бұрын

@jerbear7952 lol you think anyone in shredding, winding, extrusion, press are ever going to mention the inventors? If they were songs they would be labeled "traditional".

@MakersMuse Жыл бұрын

Love watching the evolution of shredii! I might have missed it, what grade steel are the new blades?

@nemesis851_ Жыл бұрын

Dang you’ve just about hit that golden YT milestone - congrats

@ActionBOX Жыл бұрын

Thanks Makers Muse, we appreciate your support 😃. We are using Chromoly steel blades which are much tougher. These new blades are also much smaller so there is more torque applied onto the plastic from the drive shaft. Let me know if you’d like to collaborate 😉 - Dave

@EireBallard 2 ай бұрын

Very refreshing to see someone actually use proper safety measures.

@rolanddube2169 Жыл бұрын

I love what you doing with recycling! Great job.

@ActionBOX Жыл бұрын

Thanks a lot for your support Roland 😃

@onlypoynter Жыл бұрын

man, this and the desktop injection molder are absolute game changers

@ActionBOX Жыл бұрын

Thanks 😃. I’m glad to hear other people think so too 😊. They have been super valuable to me. Cheers, Dave

@SpikeFreeman-ud3cu Жыл бұрын

Agreed!

@snorttroll4379 4 ай бұрын

buy link?@@ActionBOX

@benjaminsmith2367 Жыл бұрын

I like how you're iterating on designs. Very interesting to see the process.

@ActionBOX Жыл бұрын

Thank you very much! I appreciate your support 😃

@h7opolo 10 ай бұрын

this guy is a complete fraud, benjamin.

@GoughCustom Жыл бұрын

Look awesome so far! During the metal screw test, and the phone test, you can see the blades moving and impinging on each other a bit. Looks like it would be beneficial to work out a way to compress the blade stack! Maybe a shaft collar at either end to lock the blade stack in place, and then set-screws going through the shaft collar to press inwards against the blade stack to provide compression?

@ActionBOX Жыл бұрын

Thanks for your support 😃. I like your suggestion and will definitely look into designing that. Ps. I checked out your channel and it looks awesome 😎. I can see why shredder blades would interest you 😜. Cheers, Dave

@GoughCustom Жыл бұрын

@@ActionBOX thanks Dave! I've been really enjoying your channel as well mate!

@sketchmastertask3093 Жыл бұрын

Awesome thanks for the hard work, dedication, and demonstration.

@ActionBOX Жыл бұрын

Thank you for your support 😃

@antoniocross5956 7 ай бұрын

Totally love this design!

@ActionBOX 7 ай бұрын

Thanks 😃. Check out the newer shredii 5.0 video.

@SpikeFreeman-ud3cu Жыл бұрын

You guys are amazing! I wish I had half the know-how you both have. Keep up the amazing work!

@ActionBOX Жыл бұрын

Thank you 😊, we really appreciate hearing that 😃

@weaselsasha6322 Жыл бұрын

Been thinking of making shredder for aluminum and glad ran into this video on my feed !

@ActionBOX Жыл бұрын

Haha, awesome, glad our efforts could help someone out 😃

@Alex-ip8ue Жыл бұрын

Great video, amazing to see you keep improving designs.

@ActionBOX Жыл бұрын

Thank you very much!

@labastiegeorge1372 Жыл бұрын

Hey I am a steam student I love your ideas on home made CNC machines I have used the old shredder for an school project before thanks for the vids

@ActionBOX Жыл бұрын

No problem, thanks for watching 😃

@bob_mosavo Жыл бұрын

Awesome!!! Thanks 😁😁

@ActionBOX Жыл бұрын

Thanks for watching 😊

@hemramachandran5626 11 ай бұрын

Just found your channel. I love your structured and organized approach and your energy. Subscribed!

@ActionBOX 11 ай бұрын

Thanks! Welcome aboard. We’ve got lots of exciting content in the works. More coming very soon 🙌

@swiftbuzzerd7497 Жыл бұрын

Thanks guys, This video will be most helpful.

@ActionBOX Жыл бұрын

Glad it was helpful!

@thecaitiff Жыл бұрын

I love the idea of a bicycle drive, it's an elegant low tech approach

@ActionBOX Жыл бұрын

Thanks 😊, we also thought it was interesting smile. Thanks for your support 😃

@craigtpat 11 ай бұрын

Cool stuff shredders are the ultimate ASMR

@ActionBOX 11 ай бұрын

Thanks! They are oddly satisfying 😅

@Spiritman597 Жыл бұрын

I love your shreddy! So cool.

@ActionBOX Жыл бұрын

Thank you 😊 I appreciate that

@risaoram Жыл бұрын

Shredpods 😂 🎧 this is genius! I want to get this and your injection box v2.0 into our lab! Cool demo project for recycled plastics to new parts. 🤙🏼😎

@ActionBOX Жыл бұрын

Haha, thanks for your support 😂. Feel free to reach out to us via KZfaq and I can offer you a custom discount code.

@NavySturmGewehr Жыл бұрын

Cool I've been subscribed for a while! I could sure make use of shreddy!

@gamecubegauntlet Жыл бұрын

Amazing work my man!!!!! I would love to be able to have something like this. For years Ive been seeing lots of 3d printed parts go into the trash when the same companies that make the printers should be working on helping us reuse the bad prints. Instead they focus on selling their own filaments.

@ActionBOX Жыл бұрын

Thanks Juan 😃. We hope this shredder will help people with small scale needs for light shredding. You can get one at actionbox.ca if you need one. Cheers, Dave

@RoboCNCnl Жыл бұрын

Super cool project guys !

@ActionBOX Жыл бұрын

Thanks! Glad you enjoyed it 😃

@diymaster101 Жыл бұрын

this is genius very good job 👏🏾

@ActionBOX Жыл бұрын

Thank you 😊

@amsrbob5459 Жыл бұрын

Really impressing!

@ActionBOX Жыл бұрын

Thank you 😊

@brockwilsonmusic 9 ай бұрын

Great stuff! I would love to get some of your machines for my high school students to experiment with this year.

@ElDocThor Жыл бұрын

Great build, subscribed!

@ActionBOX Жыл бұрын

Thanks! 🙌

@JRT3D Жыл бұрын

Yoooooooo....Been looking for a good shredder to help promote to the Pultrusion scene. Top notch efforts! This thing is a Beautiful Beast!

@ActionBOX Жыл бұрын

Thanks a bunch, I appreciate your support 😃. Cheers, Dave

@evertdewit4037 Жыл бұрын

This is way better than all the aluminium can crushers here on YT ;)

@ActionBOX Жыл бұрын

hahahaha, thanks, I appreciate this comment 😊

@1992jamo Жыл бұрын

I don't know if this is just me, but I'd seriously want an emergency stop button that kills the power, rather than telling the Arduino to stop. Just because if the Arduino or motor drivers go haywire, or don't respond, the button won't do anything. Most likely not going to happen, but I'd really want something that cannot fail.

@ActionBOX Жыл бұрын

Hi Max, I must say, this is a great idea that is extremely important to implement. In my case I always had someone with me to hit the power switch not shown in the video in case of a disaster, but indeed I agree with you 100% that safety here is imperative. Thanks for leaving your awesome comment, and I hope you enjoyed the video regardless 😃. Cheers, Dave

@1992jamo Жыл бұрын

@@ActionBOX No worries. Cheers for reading/replying, and most importantly, making a really awesome video/product. Best of luck to you lot.

@ActionBOX Жыл бұрын

@@1992jamo thanks again Max 😊

@joshua43214 Жыл бұрын

^^THIS Needs a panic switch on the mains, ideally a magnetic one so it wont come on after a power failure.

@kermitdk4509 Жыл бұрын

Just what I was looking for 🙂

@ActionBOX Жыл бұрын

😃 sweet, I’m glad to hear

@Foldingblade Жыл бұрын

Amazing project

@ActionBOX Жыл бұрын

Thank you 😃

@nemesis851_ Жыл бұрын

Heck ya! At times I want to order Injecto x but then feel there will be an Injecto x+1 Good stuff guys

@ActionBOX Жыл бұрын

Hahaha, this was definitely our last shredii. It works really well, its super easy to assemble, and we are super happy with it. Injekto is also really robust and works great.

@RayTheMickey Жыл бұрын

Love the covers!

@ActionBOX Жыл бұрын

Thanks 😃. Safety first

@bearleemadeit4718 Жыл бұрын

This is awesome!!!!! I want one for shredding my failed 3d printes to reuse filament

@ActionBOX Жыл бұрын

Love it, glad you found this video useful 😊

@JCT- Жыл бұрын

Fell absolutely in love with your content. Btw now we know what made those phones indestructible: the battery. 😂

@ActionBOX Жыл бұрын

Thanks, I appreciate hearing that 😊. I would say the phone still beat shredii despite not having its battery 😜. Cheers

@Rubenmoon1 Жыл бұрын

Love your videos man

@ActionBOX Жыл бұрын

Thank you my friend 😃

@bionictran Жыл бұрын

Nice iteration on the previous designs!

@ActionBOX Жыл бұрын

Thanks 😃

@BVLVI 10 ай бұрын

Really good CGI of the Nokia being shreded!

@ActionBOX 10 ай бұрын

😂😂

@HorrorTimees Ай бұрын

awesome!

@proffesordickfacejr.4886 Жыл бұрын

Thats amazing I wish I could actually retain all the info on the internet.. I hate wanting to do something from an industral application... And not knowing how. Thank you.... Great job on the video 😉 Making a mini shredder was on my list thank you soooooo very much.

@ActionBOX Жыл бұрын

No worries, check out actionbox.ca

@x_jaydn Жыл бұрын

cool upgrade~

@ActionBOX Жыл бұрын

Thanks 😃

@ohneplan Жыл бұрын

Absolut lovley nice Work man

@ActionBOX Жыл бұрын

Thank you my friend 😃

@peerappel2012 Жыл бұрын

Very nice!

@ActionBOX Жыл бұрын

Thank you 😃, I appreciate your support.

@Lunacy_ Жыл бұрын

Man i really need to get me a shredder. Since i learned you cant actually easily recycle prints I have been saving all my scraps.

@ActionBOX Жыл бұрын

Feel free to check it out at this link actionbox.ca/products/shredii-4-0 Cheers, Dave

@WildmanTech Жыл бұрын

I love building things from bikes. I could totally work with you on that idea.

@raziel3726 Жыл бұрын

Ingenious 👍🏻👍👍🏽

@ActionBOX Жыл бұрын

Thank you 😃

@1.618_Murphy Жыл бұрын

The indestructible Nokia was destroyed because IT WANTED TO! It thought *“Enough is enough, it's time to move on!”*

@ActionBOX Жыл бұрын

😂

@poloska9471 10 ай бұрын

I consider that a Nokia victory... it broke the shredder before getting fully mauled so it's victorious yet again... literal steel nails get rekd and the nokia is just like... meh... put the battery back in and let's see a do-over... I bet the Nokia will make it out with a couple of scratches. That thing is without a doubt absolutely indestructible. I dont see why we need all of these fancy shmansy fighter jets when we have Nokia that can do both electronic warfare AND bunker/tank-busting percision KOs at a high enough velocity, fired out of standard artilery of course... but noooo we need 32 trillion dollars of debt instead. Mount that bitch on a Walmart drone and I bet it could down the F-35. In fact, I am challenging the Russian bots/intelligence officer reading this comment to try it and then give me a reward later when I win them the Ukraine war with this comment. Nuff said.

@Gridlessness Жыл бұрын

Very cool! Just found your channel and subscribed. I’m planning a recycle/re-use project for our offgrid homestead, my goal is to process 100% of our recyclable materials ourselves. I’ll be documenting this project on our channel. Your shredder design looks great, I would make it a hand crank of some sort. What would it take to beef up shreddie to handle glass and tin cans?

@ActionBOX Жыл бұрын

That’s awesome 😃, I’m glad that shredii is sparking ideas for you. I checked out your channel and it looks very interesting. Let me know if we can help in any way. To answer your question, I would need to know exactly what you are trying to shred (thickness, dimensions etc.) and I can test it out here at our shop. Cheers, Dave

@blackklawskytchannel1993 Жыл бұрын

It’ll be really cool to have a awesome shredder that I can use to shred so many things in my bedroom

@ActionBOX Жыл бұрын

Definitely! What do you have to shred?

@wantafastz28 Жыл бұрын

Man I want one of these! Nice build.

@ActionBOX Жыл бұрын

Thanks a lot 😊. They are definitely great machines 😃

@wantafastz28 Жыл бұрын

@@ActionBOX copper shredding next?!

@ActionBOX Жыл бұрын

@@wantafastz28 no I probably won’t have time for that. What would you use it for?

@wantafastz28 Жыл бұрын

@@ActionBOX shredder of copper lol. 4/0 wire specifically. But I know that is a huge task. The industrial ones are completely out of reach financially.

@entecrental4088 Жыл бұрын

Crasy Work!

@ActionBOX Жыл бұрын

Thanks 😊

@traviscagle436 10 ай бұрын

Nice clean video.

@ActionBOX 10 ай бұрын

Thanks! Glad you liked it 😄

@WeArePharmers 9 ай бұрын

I'm interested in shredding #2 HDPE plastic (milk jugs, empty medication bottles, etc) for recycling. Is this able to help with this, and what can I do with the shredded bits to make a new product? Thanks!

@danyo41 2 ай бұрын

This was super cool to see after just watching the original Shredii vid. You may have covered this in another video but - is there a benefit to using the copper instead of a mounted pillow bearing? Also wondering if you have the cnc files available for this to build my own. Love this project!

@petriepretorius4085 Жыл бұрын

you are talentful...really good designer and artisan...

@ActionBOX Жыл бұрын

Thanks Petrie 😊. I appreciate your support.

@SomeBody80852 Жыл бұрын

I love shredii vids

@ActionBOX Жыл бұрын

Thanks 😊

@DirtySouthBaitAndTackle 5 ай бұрын

A shredder like that would be a life saver for me.

@ActionBOX 3 ай бұрын

We sell shredder kits. Check out actionbox.ca! Message us for a special discount ;)

@Bichuso-nn1hw Ай бұрын

Will it also work with wet materials?

@TinyYahoo Жыл бұрын

Freaken Amazing

@ActionBOX Жыл бұрын

Thank you my friend 😊

@chitalulupupa1836 5 ай бұрын

I don't know how much this Shredder is but it would be a dream to have one because I believe it can change my life for good... You're a genius sir...

@ActionBOX 5 ай бұрын

Thank you sir 😃. Check out the video of our latest shredii 5s

@elginscodex Жыл бұрын

That’s a sturdy machine. I’ve seen wood chippers that were less sturdy-built

@ActionBOX Жыл бұрын

Thank you my friend.

@user-pv5yh4de6f Жыл бұрын

기계기술이. 대단하십니다

@rikidawson7510 9 ай бұрын

Whats that white thing on your cr30 3d printer. Only ask as I have a cr30 as well

@0bsidianPrime Жыл бұрын

I have so much paper stuff, something like this would be a fantastic middle-machine for my burn barrel process.

@ActionBOX Жыл бұрын

hahaha, glad to hear. Feel free to check it out at actionbox.ca

@user-yu7gz2xt9m Жыл бұрын

Me encanta!!! Me parecería más ingenioso, que los piñones se transmitieran el movimiento entre sí, con un solo motor

@snorttroll4379 4 ай бұрын

how do you make the hardened steel?

@mrspeaky6885 Жыл бұрын

from 80 subscribers to 80k? cool to have been a witness to that

@ActionBOX Жыл бұрын

Hahaha, thanks for your support all the way through 😃. I appreciate that. Cheers, Dave

@corymcgarrity7535 6 ай бұрын

Did you notice a few of the nokia shreds were on fire! too cool!

@ActionBOX 3 ай бұрын

Good eye!

@GBWM_CNC Жыл бұрын

There was so much stress on the construction when you put the Nokia in, wow :D

@ActionBOX Жыл бұрын

Indeed hahaha, that phone really is tougher than one would assume 😂. Thanks again for watching, I always appreciate seeing your comments smile. I still think we should collaborate on a project 😉

@dallascole8200 Жыл бұрын

Love your channel, and got a new sub.

@ActionBOX Жыл бұрын

Thanks, welcome aboard 😃

@dominik_cadi4957 Жыл бұрын

excellent video 👍👍

@ActionBOX Жыл бұрын

Thank you my friend 😃

@offgridwanabe Жыл бұрын

Amazing

@ActionBOX Жыл бұрын

Thank you! Cheers!

@theboz1419 Жыл бұрын

You can put a grate with .250 holes evenly spaced below the blades. This will make the shread size smaller or larger determined y the size of the holes. But, that would probably work better if the speed was much faster. The grinders we used in plastic had the grates in placed so that we could get consistent sized regrind to be recycled back into our extrusion process. The grates were curved to the diameter of the blades and they had a small gap. So you get a slice effect as the plastic went through the holes.

@ActionBOX Жыл бұрын

Sweet, thanks for the insight.

@Pippy626 4 ай бұрын

Why is the dual shaft not available?

@chadgdry3938 Жыл бұрын

OMG I want one of these... Watched from Washington DC

@ActionBOX Жыл бұрын

That’s awesome, thanks for watching 😃. They are available at actionbox.ca Cheers, Dave

@mikewood3422 Жыл бұрын

Wow, amazing video. Loving shredii and the content you are producing. Is it possible to code for a timed auto reverse when max torque / power draw is hit. That way it would protect the key and also react prior to further breakage. You would have to use a timer relay I think. I am sure Dave Hakkens did something like this. Keep up the amazing content. Mike

@ActionBOX Жыл бұрын

Thanks Mike! It’s definitely something to explore. Appreciate the suggestion 😄

@df3_legomocs Жыл бұрын

I’d love to try and shred everything 😂

@ActionBOX Жыл бұрын

Haha there is something so satisfying about shredding things 😂

@michaelleady9089 Жыл бұрын

Awesome channel

@scottwebster7613 Жыл бұрын

I could put that to great use. I've been saving plastic caps and other plastics for years.

@ActionBOX Жыл бұрын

It shreds caps very easily that’s for sure.

@1992jamo Жыл бұрын

Nice vid mate.

@ActionBOX Жыл бұрын

Thank you Max 😊

@danielwells3008 11 ай бұрын

Amazing. I need this for a lab application to shred steel turnings. What type of steel are you using in your blade?

@ActionBOX 10 ай бұрын

Hey! The blades are made of hardened steel. Contact us from our website if you have any other specific questions about the shredder.

@achannelwithnopurpose1977 Жыл бұрын

I have an idea for the machine key issue: Make the shaft hexagonal. The shaft can still transfer the torque to the blades but the shredder will be more robust as the bigger shaft as a whole is obviously going to be more stress resistant than the smaller machine key. Some Shredder designers have already done this and it definitely worked wonders.

@ActionBOX Жыл бұрын

Thanks for sharing!

@Spiritman597 Жыл бұрын

What could you use on the discharge to take the shredded material and turn it into powder , mix with another material or into an intrusion heater tip to produce your own custom 3d print material

@ActionBOX Жыл бұрын

I’m not sure 🤔.

@Jellylazer Жыл бұрын

Ayyy please one shreddy, lol I am a total dummy, and I am learning how to use freecad, I just made a phonestand, took me two tries to get it right, wishing I could recycle the pla used up 😅 loved the vid,

@ActionBOX Жыл бұрын

Thank you for watching 😃. The two shredii machines that we are giving away will be offered to two random subscribers who will be listed on our community page on Feb 19. Cheers, Dave

@kajn3206 Жыл бұрын

it looks very good, it would also be suitable for a little plastic from the printer and maybe aluminum

@ActionBOX Жыл бұрын

thanks

@velvia7880 Жыл бұрын

Would be really nice with one of these. Have kilos of failed prints that I would like to shred and melt into new filament.

@ActionBOX Жыл бұрын

That would be awesome.

@nandingpanelo Жыл бұрын

Youre amazing. Happy new year

@ActionBOX Жыл бұрын

Thank you! 😃

@user-fw1fw7ll4b 11 ай бұрын

Where do you purchase the blades for a project like this?

@ActionBOX 11 ай бұрын

Actionbox.ca

@agentid36 Жыл бұрын

I would love to get a shredder. I want to investigate them in terms of a method of reducing the volume of generic trash (too much air). Probably add a large hopper with a lid on top, and a compacting extruder below.

@ActionBOX Жыл бұрын

Thats a cool idea. You can get s shredder at actionbox.ca

@marlonglodo1930 Жыл бұрын

Wow i really love and need it.

@ActionBOX Жыл бұрын

Thanks 😊

@michaelschwarz5816 Жыл бұрын

Ha, this thing can solve my problems with 3d print failures in Seconds. ;-)

@ActionBOX Жыл бұрын

It is great 😊. Thanks for watching.

@madhead6700 Жыл бұрын

I just subscribed! I would love a shredder. I starting a plastic recycling business and I haven’t found a shredder that I can afford.

@ActionBOX Жыл бұрын

Yeah they are usually quite expensive. I wish you good luck with the business 😊

@user-lx9jm1wo3h Ай бұрын

Why did you use bushings and not bearings?

@williamdawson3353 10 ай бұрын

Awesome

@ActionBOX 10 ай бұрын

Thanks!

@Biketunerfy Жыл бұрын

Shredders blades like those and bigger are usually made using an alloyed steel called “Manganese Steel” or “Mangaloy” also “Hadfield Steel” because this is one if the most toughest and abrasive steels there is and as a bonus the steel actually self repairs over time because it work hardens and gets extremely hard and tough up to 65 + HRC which is high speed steel territory but it does not harden all the way through, only the parts that are doing the work so the tips and edges and as soon as they start to wear the new steel hardens underneath so in essence it self repairs constantly holding an edge but that’s not all, because the new steel underneath is softer it’s has very high impact toughness whilst resisting wear on the work hardened edges. This is why it’s used in shredders and crushers excavator bucket teeth things like that and you’d be surprised the things it’s used in. It’s almost impossible to machine even with TC (Tungsten Carbide) due to its work hardening properties, it is usually cut to shape with plasma cutters or laser cutters due to its crazy properties and then ground, Anyway I just thought it was relevant to what is going on here.

@ActionBOX Жыл бұрын

This is awesome information, thanks for sharing 😊

@geoffreyallison1560 11 ай бұрын

Need one to crush rock for Gold Prospecting. Got one one, or will this work? Thanks! Great Ideas !!

@toxaq Жыл бұрын

Considered using the furnace to temper the blades?

@ActionBOX Жыл бұрын

Good idea, however the blades have not shown any sign of weakness yet. They have not dented nor deformed in any way. Thanks for the awesome suggestion though 😃

@toxaq Жыл бұрын

@@ActionBOX you mentioned you used harder steel, was wondering if you cut them from softer and tempered those?