Heavy duty Homemade Lathe

Рет қаралды 3,868,920

2 жыл бұрын

In this video i'm showing how i built my homemade metal cutting lathe mk2 from scratch! challenging myself by only making it with basic tools. It works really good and I will be using it alot in my future projects for sure! It probably won't be the most accurate machine ever, but surely good enough for me. Unfortunately i couldn't find a right size and hardened hollow headstock shaft at my local metal yards, and buying one new would have been way too expensive. Also i did pack the headstock bearings with grease, but just didn't show it on video. The autofeed works very good when doing normal work, but thread cutting is a bit to difficult for now, maybe an upgrade for later. As well as a digital readout.
Support me on patreon: / homemademadness
Follow me on instagram for project updates:
/ homemade_madness

Пікірлер: 4 600

2 жыл бұрын

People spent centeries to develope a lathe from ancient tool. Decades to improve, years to build one. But there's a guy just made one from scratch with an angle grinder. Someone would say its a wasting time but as a metalworking guy... Your a hero. Hat off to you sir!

@ophirb25 2 жыл бұрын

I have a friend who is always saying to me why aren't you buying, why are you trying to invent the wheel again? And I say - is there a more satisfying thing then to build you own machine and then use it to manufacture parts?

@miloszivkovic6922 2 жыл бұрын

@@ophirb25 this is our future cuz its not reasonable to buy one, and it will be worse in this slavery new world order

@damirdze 2 жыл бұрын

@@miloszivkovic6922 china makes very cheap ones. They have the cheap transport too. This project is good and with few modifications , a little better tools for precise cutting and gear based feed ( synchronized with the chuck ) he could make the lathe with the ability to cut the threads.

@Fabricationskills 2 жыл бұрын

Cà Lem was my inspiration and now this guy too Cà Lem you are such a genius guy Best wishes for u Stay blessed ❣️

@reinobrowne9597 2 жыл бұрын

Awesome, I just hope he survives all that rust on his lungs so we can get more content.

@StuffMadeHere 2 жыл бұрын

Very impressive build! I felt the pain of cutting all that steel with a grinder and a hand drill in my soul. A small tip: I’d suggest wearing a respirator when performing heaving grinding in a tiny room to avoid chronic lung issues…

@ebprodigy 2 жыл бұрын

I'm not one for being a "safety sally" to other men in their own shops, but in this particular instance I second your small tip only because I want to see many more years of this mans madness.

@Maleko48 2 жыл бұрын

I was thinking the same thing. Love this content, but please consider using a respirator with all those cutoff discs and metal flying in the air.

@homemade_madness 2 жыл бұрын

Thanks man!! Yeah it definetly was a pain but you know what they say: aint no victory without a battle😉 i always try to have my shop doors open when doing alot of grinding but might just wear a respirator next time as its been commented so much😅 thanks again means alot man i love your content too🤙🏻🤙🏻

@bobstovall5449 2 жыл бұрын

@@homemade_madness All that iron oxide dust plus no-telling-what-else being atomized and sucked into your, still, quite young longs makes for, potentially, much unhappiness in your advanced years. Take that from a guy who has worked around machinery his entire life and lost a brother and and uncle to lung diseases.

@eggyknap 2 жыл бұрын

You have done more grinding in this one project than I've done total, Ave you get to decide how you do it. But yeah, a respirator would probably be wise.

@reviewsjustcuz1437 Жыл бұрын

As a machinist that mostly does Lathe work, this is one of the most impressive things I've ever seen.

@6at32off Жыл бұрын

I've been a machinist for 40 years, I've done some amazing things in my life and this project has me impressed all to heck. What an amazing job young man, you are an outstanding craftsman.

@lanchanoinguyen2914 9 ай бұрын

Machinist will be impressed but mechanics are not.He was doing great but no bargain.

@levicagampang7139 Ай бұрын

@@lanchanoinguyen2914 ok try making one with a grinder and a drill. that mechanic title of yours will surely make all that hard work easier right?🤓

@jubbaronny 2 жыл бұрын

As a turner of 38 years experience, that is seriously impressive workmanship. Well done sir!

@BXBvlog 2 жыл бұрын

👍👍

@TheMadManPlace 2 жыл бұрын

To be honest I am speechless ... Considering the tools you started off with, I and many others are blown away. Taking into account what you built here, a drill press will be easy for you. Congratulations...

@andyaustin1564 2 жыл бұрын

That’s why he mention build drill press next..haha…

@CrazedOne79 Жыл бұрын

Building a machine in a way that allows you to use the machine to build other parts of the same machine is just next level genius

@user-uh5gz1ez1j Жыл бұрын

Это же сколько терпения надо, чтобы на коленке сделать токарник! Парень, я восхищен тобой!!! Такой молодой и уже такой целеустремленный и супер упертый!

@user-lo2fy3jf2z Жыл бұрын

по дереву пойдет а по металлу увы, жесткости нет, бесполезная трата времени, но как опыт танца на граблях сгодится

@zbufferasat Жыл бұрын

@@user-lo2fy3jf2z Для неспешного точения пойдет. Думаю жесткости в нем не меньше, чем в школьнике.

@igor_nsk 3 ай бұрын

@@user-lo2fy3jf2z теоретик с cnc клуба?

@McKildafor 2 жыл бұрын

This is the most impressive thing I've seen on KZfaq. Period.

@homemade_madness 2 жыл бұрын

Thanks😁

@BuffaloBillsSon 2 жыл бұрын

You watched a Period on KZfaq!

@TheHailacopter 2 жыл бұрын

@@BuffaloBillsSon and it was bloody brilliant!

@TheHailacopter 2 жыл бұрын

It is kinda cool to watch the next Clickspring take his first steps.

@jarobuilds 2 жыл бұрын

100%

@danielwdunn 2 жыл бұрын

This is the most impressive DIY build I've seen on KZfaq. You made one of the most useful shop tools using only handtools and the unfinished lathe itself to complete it.

@outstanding1448 2 жыл бұрын

Indeed. At the beginning, I was like "Well, I guess, I have to see another home made lathe to kill my time with", but after I was Genuinely stunned. This fellow beats Everything I've seen so far.

@thursdayblack 2 жыл бұрын

To make a lathe, you must first build a lathe

@TheSignstoSee 2 жыл бұрын

@TheChangenick A LATHE WAS THE FIRST MACHINE THAT STARTED THE INDUSTRIAL REVELUTION BECAUSE IT IS THE ONLY MACHINE THAT CAN REPRODUCE IT SELF :)

@huycuongtran6095 Жыл бұрын

@@outstanding1448 s

@johngibson7307 Жыл бұрын

Couldn't agree more this is extremely impressive

@jamiebuchanan7272 11 ай бұрын

If you’ve never used an air filter these are great. kzfaq.infoUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!

@BlueAvi8 Жыл бұрын

It's nice to see a video where someone builds a lathe without using a DIFFERENT LARGER LATHE. Thank you.

@dalebarnes2737 2 жыл бұрын

Ive worked in machine shops and a maintenance workshop for 50 odd years and your effort was amazing; very impressive.

@ccleve7889 2 жыл бұрын

As a machinist and a fabricator, this was truly impressive!.. I would have never taken on such a task without using a mill, lathe, and store bought ways, carriage etc.. for you to do this with nothing but raw steel and some very basic power and hand tools is beyond impressive. I feel like this is how it must have started.. someone built something like this by hand, then used it to create more accurate parts to build a better second version and so on until we had the precision of the machines we have now. Hat is off to you sir! well done! And you should definatly go for the 3 axis mill build next!

@ttt69420 2 жыл бұрын

Hours and hours and hours of hand planing in order to build a mill that could do it.

@6EngineGuy1985 Жыл бұрын

I am a Journeyman Tool Maker and seeing your skill and dedication to this project blows me away! You needed a tool and made one Hell of a tool! That will give you many good years of service.

@BenCDawson 6 ай бұрын

I was wondering to myself how someone would make a lathe from scratch, I searched for it not really expecting anything good, this truly exceeded my expectations by far. Stunning work, I was shocked by the level of craftsmanship and use of tools.

@homemade_madness 2 жыл бұрын

Watch the lathe in doing its thing in my new project! kzfaq.info/get/bejne/Zteef7R_z6rdgHU.html . Who’s up for a 3 axis vertical mill build next?🤪

@Madd3771 2 жыл бұрын

Yupp

@victorfakiolas 2 жыл бұрын

ohhh yeeesss please!!

@jean-francoi4083 2 жыл бұрын

I'm up for that.

@user-vr8xv5jz7r 2 жыл бұрын

Please

@PiefacePete46 2 жыл бұрын

I'm up for ANYTHING you tackle! :o)

@fourkings7897 2 жыл бұрын

This is the most Insane homebuilt I've ever seen... This is the whole new level of "I MAKE A NEW ONE"

@tiberiusclaudiusnerogermanicis 2 жыл бұрын

He will really need to step up his game... fuck making new bolts on a lathe... how about make a new lathe to make a new bolt hahaha

@origamigamer8990 2 жыл бұрын

My old lathe is unreliable *I MAKE A NEW ONE*

@guillaumefraser3813 2 жыл бұрын

@@origamigamer8990 My Mechanics needs to see this.

@origamigamer8990 2 жыл бұрын

@@guillaumefraser3813 Thanks for getting the reference.

@kaveirinhaz Жыл бұрын

Impressive build. I've seen many home builds on KZfaq, but this lathe is truly fantastic! Really GREAT job!

@Lumencraft- 7 ай бұрын

I don't even have words to describe you sir! But I'll start with patient diligent hard-working and impressive!

@redhouseokc4097 2 жыл бұрын

Building this lathe was not the most inspirational Part for me. His sheer patience and determination with a cordless drill and the amount of time spent on that grinder has surpassed anything else I’ve ever seen on KZfaq. What a magnificent feat you accomplished my friend everything from here on out is gonna be a walk in the park. Good job!!

@sweetmatthew662 2 жыл бұрын

I WAS TIRED OF DRILLING AND TAPPING THOSE HOLES JUST WATCHING HIM!!

@dennisferron8847 3 ай бұрын

I would have broken so many drill bits.

@SirTodd. 2 жыл бұрын

Man, this is amazingly impressive. I worked as a journeyman machinist for about 11 years and I've watched quite a few videos on here about people building lathes from scratch and I have to say, without a doubt, yours is leagues beyond them all. Absolutely stunning and you seem to be pretty young to top it off. Literally, amazed!

@freeflyer Жыл бұрын

We watched and surprised as a whole family. What a craftmanship! Respect 🙏

@albertbraunwaldeck1047 Жыл бұрын

Hi Sr.This must be one of the most extraordinary works done by an DIY handyman,From the design up to the finished lathe it is a beautiful achievement.I admire specially the way in witch you planed the steel pieces using only handtools,Amazing.Congratulations.And the machine looks so solid and stable too.

@DavidHerscher 2 жыл бұрын

How does this only have 5K views, and less that 10% of those people have liked? This guy is incredibly skilled, especially for his age. This build is absolutely amazing.

@mattgrant6745 2 жыл бұрын

I think the problem is true craftsmanship and skills like these are falling to the way side and most people on social media don’t even have a clue what he’s doing and what a lathe is. But you are correct he is incredibly skilled. Sad that this is not more appreciated.

@aussiebobcat72 2 жыл бұрын

This guy is obviously very talented and very persistent to build this. My only concern is for his safety with this large being very top heavy (as lathes typically are), but his bad needs way wider feet and should be bolted to the floor. Tipping it over would be very dangerous for him. But your right with your comment.... good on him

@janeblogs324 2 жыл бұрын

@@mattgrant6745 you sound like my mum, she said the same dribble literally. Only takes 10 minutes on yt to see home taught craftsmen is a booming sector. View count comes down to algorithms and watch time. A 37min no talking video appeals to 1 audience. This is not entertaining or educational unless you already know how to operate all the tools he's using

@rickyseddon4786 2 жыл бұрын

Nearly 60k give it time my friend

@DavidHerscher 2 жыл бұрын

@@rickyseddon4786 Haha, yeah that escalated quickly... 🤣🤣

@randphong 2 жыл бұрын

This guy is very smart and extremely determined. Must have also spent a huge amount of time sourcing all that metal, and then to film & edit the video. I really like the cutting and surfacing jigs for the grinder. When I saw that temporary headstock, I thought "This is The Lathe that Built Itself"!

@homemade_madness 2 жыл бұрын

Haha true! Thanks

@jameshodgson1609 2 жыл бұрын

I kept think to myself ok how you get make that part then coming up with ways to do it. I too especially liked how the part built lathe was used to build some of the other parts. Next stop a large boring tool to bore out the headstock shaft .

@Validole 2 жыл бұрын

@@jameshodgson1609 Man, boring out that hardened shaft might just be the thing that is beyond that poor treadmill.

@denjhill Жыл бұрын

I am blown away with this project. Beyond anything I would attempt and you made it look easy. Great job!

@walterafrankhauser6526 Жыл бұрын

8th

@pesnet7 7 ай бұрын

Congratulations on the talented project and perseverance. He deserves a doctorate thesis in metal mechanics.

@n9viw 2 жыл бұрын

I spent most of my time watching this video with my hand over my mouth, trying to keep my jaw from falling off. Man, when I was your age, I was still playing with car audio systems and chasing girls. HOLY CRAP THIS BUILD IS BLOODY AMAZING!!! I want to be you when I grow up, but you're younger than I am, so now what do I do?! YOU ROCK!

@mrimmortal1579 2 жыл бұрын

There is a lot of time during this video that the cameras are turned off, so who says that he’s not also out chasing girls (or guys. I try not to be judge-y) Of course, if he keeps not wearing a respirator when he’s grinding, it’s going to make it a lot harder later in life to catch those girls (or, you know, guys)! Seriously, though, he did an amazing job, and it was a good video of his efforts. While a lot of what he did might be lacking a certain degree of precision, he can use the lathe he built to make other tools and parts for his lathe that have a higher degree of precision.

@khayyam741 2 жыл бұрын

No excuses. You should still try to be him if you think he is good enough.

@BIGSMOKE-bl2lq 2 жыл бұрын

The sad part is having the loud sounds in your car gets them to look but it dosen't make them like you

@CPTFiXtion 2 жыл бұрын

I just realized I've been watching with my hand over my mouth too lol

@theupscriber65 2 жыл бұрын

Former toolmaker/machinist turned machining engineer here. Very impressive! Add a cheap mag base dial indicator to the cross slide and you'll know how much material you're taking off.

@shaneward6689 2 жыл бұрын

Exactly what I was looking in the comments to find, need to use a dial indicator to make shure everything is square and uniform, a basic setup.square will only do so much for this kind of work

@CoreyBrasher 2 жыл бұрын

@@shaneward6689 yeah, I wondered that too. Square the chuck and look for runout.

@user-xz7fh2ft6h 4 ай бұрын

Best backyard machinist on KZfaq. very skilled. can only imagine what this guy can do in a real machine shop if he can do all that with basic tooling. Mind is blown. Good job.

@user-po4zz6hl8u Жыл бұрын

You have broken all standards with your achievement. I have not seen anything on KZfaq that is more grateful than this wonderful work. Your work is ranked first on KZfaq.

@Astra_Life1 2 жыл бұрын

When using a lathe in school I used too always think how would you make a lathe without a lathe 😂 answer is use it half way through the job 😂 It’s like the chicken and the egg thing 😂 love it great work !

@akaHarvesteR 2 жыл бұрын

It's just fascinating how lathes can be used to make themselves. Not very many tools have that superpower.

@cryptowars2165 2 жыл бұрын

thats so true bro he did well.... i feel like making one now

@Jer_Schmidt 2 жыл бұрын

Wow you are a crazy person. In a good way. Hats off!

@homemade_madness 2 жыл бұрын

Thanks! You too😉

@tonto8029 7 ай бұрын

I’ve watched many lathe restorations but this is the first lathe build. Congratulations

@samehdarawshi3537 Жыл бұрын

reading the enthusiastic comments i can only second them! i think this is the most inspirational video i have ever seen among thousands of DIY videos! best luck to you and to your promising channel. will love seeing other upgrades videos to this lathe

@motographics 2 жыл бұрын

As an engineer myself.. speechless absolutely fantastic! what was made along the level of detail and dedication, honesty you should be so proud of that !

@ggguest329 2 жыл бұрын

No only the lathe made me speechless, these angle grinder jigs you used are just as impressive as the new built lathe! Thanks for sharing!!

@kaboom-zf2bl Жыл бұрын

but you keep spinning round in your lathe-ering on of kudos ... and just keep tooling around the issue of how impressive it is LOL .... couldnt resist you started it LOL

@skew8451 10 ай бұрын

I've been a sheet metal worker and fabricator for over 25 years and I'm impressed. Normally I criticize these DIY machines in my head the whole way through but I am honestly impressed with this. You may want to build yourself a mill next if you haven't already, then everything else will be way easier.

@creative-luke Жыл бұрын

Wygląda pięknie i robi swoja pracę. Rewelacyjne wykonanie.

@ladbrestoration 2 жыл бұрын

You can be really pride of yourself! Congrats 👌👏 can’t wait for the video of the drill now 👀

@homemade_madness 2 жыл бұрын

Thanks!! Soon😁

@kaboom-zf2bl Жыл бұрын

@@homemade_madness nice job ... would this be scalable down to say a desktop version for modeling work ... say a max size of 2 or 4 inch stock 25mm or less . did you know when you used the lathe to make the lathe you actually machined out any alignment errors by using the circular mean of the error to compensate for it ... essentially the turning took into account the error and machined with that essentially at 0 ..... at the end of this build to the basic lathe finished how much cheaper than a store bought one of roughly the same abilities ...

@sonofulti1859 2 жыл бұрын

The way you rig up your grinder to make the flat edges is as impressive as the build itself

@mattstroker3742 2 жыл бұрын

This guy is still so young and doing impressive stuff. He's gonna go places.

@MrDiegoNori 2 жыл бұрын

That's what I was thinking. Kid essentially made a milling machine.

@johnkries8189 Жыл бұрын

You should be proud of your project. Good planning, problem solving, determination. An excellent out come. Well done.

@gyrogearloose1345 Жыл бұрын

Totally freaking awesome! Kudos man: great skill, understanding and imagination. Tons of determination, masses of energy and focus. A huge job accomplished. Big congratulations to you young man. Homemade Madness, yes you can be proud! Onwards and upwards! Wishing you good fortune in all your projects!

@paultosev1599 2 жыл бұрын

You have shown everyone on KZfaq what a Home build should be all about. To be able to improvise with the most basic tools for such a build is a talent that very few people have. Mate, if you keep this enthusiasm up the sky is the limit. I thought I was clever because of the things I build but my work shop is like NASA compared to the tools you work with. The future looks bright for you.

@imagineer7124 2 жыл бұрын

The best video ever. No talking, just showing work done and proof of end results. I hope KZfaq pays you well.

@johncoops6897 2 жыл бұрын

And no fucking music or moronic sound effects! Epic :-)

@robertorzech8922 5 ай бұрын

Yup ! You pretty much blew everybody away with this stunt ! You are a master ! You deserve a congratulations fit for BOSS !

@JH-zy1dj 3 ай бұрын

You are the quick jig master! I've never thought to jig my grinder to produce a flat surface, outstanding thought process. Well done!

@kelleywhitehurst3180 2 жыл бұрын

What is so amazing about this build is YOU DIDN"T LIE! All of the tools were basic. Some of the parts were purchased or sourced from other machines, but that's fine. You saved tens of thousands of dollars. Truly amazing.

@threegreencharms 2 жыл бұрын

All my skepticism melted away as I made my way through this video. It didn't turn out to be a giant waste. The result speaks for itself. I'm very impressed. Thanks very much for sharing this.

@BobertPhoenix13 6 ай бұрын

Your tenacity and ingenuity is mind boggling. I'm blown away.

@user-kr6yj4rh1l Жыл бұрын

Beast diy home build with the least workshop facilities and just basic tools lve ever seen and with outstanding results, bloody well done mate, keep it up

@bogdankoch5757 2 жыл бұрын

Impressive. It requires a lot of skill to make a sutch good lathe. And just with tose limitet tools, seams nearly impossible. This is one of the best videos on KZfaq. Keeper ging. Greetings from Germany

@aSpyIntheHaus 2 жыл бұрын

The thing about 33 min videos playing at 1.75 speed without volume is they really make the sheer epicness of what you have built an understatement. This is genuine DIY gold. Not a drill press in site! The fact that you cut that square bar in half so neatly is testament to skill mate. Nailed it. I mean having gibs would be handy later on but I reckon by that stage you would probably have built a better and more accurate one.

@Lucky_Red_Fish Жыл бұрын

I am truly impressed, i have seen home made lathes before many using pre ground beds, and when i saw you weld some stock steel on i thought, what are you doing? you cant do that, but then the way you made grinding jigs to create your own was legendary! Outstanding work!

@jorgeurquiza9354 Ай бұрын

This is the most beautiful, useful, strongest, thing that i have been in KZfaq, in the last years. Thanks a lot.

@DrMatt96 2 жыл бұрын

Went into the video thinking "alright this is going to be an inaccurate pile of shit right?" then sat here for 30mins straight not believing what I was seeing and finally ended with "this was the most impressive build I've ever seen." Honestly dude I'm speechless right now, the cleverness and hard work that you put in to make this thing is undeniable. You have earned my subscription I physically cannot leave without subscribing now.

@floatncoffee 2 жыл бұрын

Making a temp head stock to cut the hole! Pure genius!! The whole build is genius! Hats off to you sir.

@homemade_madness 2 жыл бұрын

Thanks!🤟🏼

@xxxggthyf 2 жыл бұрын

I saw something similar on another channel a while back. There's something very satisfying / bizarre / funny about a half built lathe being used to make parts for itself 😀

@patricklacson Жыл бұрын

Amazing. I'm not sure what is more impressive, your final lathe or all the rigs you used to build the lathe!

@FBCarreiro Жыл бұрын

Genial. Looks almost impossible do it it with this quality. Congratulations and thank you to share your knowedge. It is most powefull and complete lathe project homeda ever seen in KZfaq

@nickmaclachlan5178 2 жыл бұрын

Fair play, $800 wouldn't get you close to a Lathe of this size and weight unless you got an absolute steal of a second hand unit. It's obviously never going to be as accurate and repeatable as a factory built item and there's no threading capability but for the jobs it's likely to produce, I doubt if you need that. I particularly liked the fact that you had to use it to make parts for it....... Latheception? You obviously have the skills to step up your game. Now build a milling machine and use the two of them to produce an even better Lathe and upgraded Mill? Lol.

@scottsolar5884 2 жыл бұрын

One can thread using taps and dies and the stability of the machine.

@nickmaclachlan5178 2 жыл бұрын

@@scottsolar5884 This is true, however only up to a certain size, which, in my experience is usually juuuuuust smaller than the actual size the job required. Lol.

@ashreid20 2 жыл бұрын

he dosn't need a mill, he's got an angle grinder and some wood jig's?!

@camberlubos3995 2 жыл бұрын

For sure he can do threading and inprove the accuracy. There is many ways to do threading, not just those methods form a school book, Inam sure you guys know it. Now, I would start with a basic table levelled somewhere in the shop with good milling machine. All would be much more accurate and easy, but still kudos to man, amazing work.

@nickmaclachlan5178 2 жыл бұрын

@@camberlubos3995 Agreed, the only problem with Lathe threading though is you need a fairly complicated and adjustable gearbox to drive both the main faceplate and the carriage spindle in order to cut different thread pitches...... I can see why he wouldn't have attempted that on a home made machine.

@Venge94 2 жыл бұрын

This possibly one of the most inspiring videos ive ever seen!

@user-ry6ji3sm7g 7 ай бұрын

This is absolutely insane! The grinder skills are level 1000+. Unbelieving fabrication!

@dok.Sanger Жыл бұрын

Я много смотрел видео как сделать токарный своими руками, но тут есть интересные технические решения! Ваша работа восхищает. Благодарю за то что делитесь своим опытом!

@ZReviews 2 жыл бұрын

This should be an ad for Makita Tools.

@homemade_madness 2 жыл бұрын

It should.. but it isnt (yet?🤷🏼‍♂️)

@ApexLegendsChampionsClub 2 жыл бұрын

he is European judging by wall sockets, Makita is widly available and most bang for the buck in Europe by far compared to the other brands that is why it is so widely popular here

@notagunfreak8146 2 жыл бұрын

@@ApexLegendsChampionsClub he is dutch

@cougarhunter33 2 жыл бұрын

I never leave a blue box behind at an estate sale if I can help it. As a result, I have mostly Makita gear now. Been very happy with them for a number of years now.

@luisnunes5274 2 жыл бұрын

The most impressive thing is the accuracy of the entire build using only those tools. I applaud your dedication and craftsmanship, truly a work of art.

@ksapp2622 8 ай бұрын

Dude this is the most impressive build of ANYTHING I've seen on the internet great job you should be super proud of that thank you for showing this

@CreativeEngineering_ Жыл бұрын

One of the better homemade lathes I have seen. Great job.

@brianslaven3326 2 жыл бұрын

I’m in complete awe! For those of us that’s actually used a 4 1/2 and 6” angle grinder can understand the dedication it took to make this lathe. You are a true artist

@osirisptah 2 жыл бұрын

Dude, this is amazing. This is by far the most impressive diy build I've ever seen. This Old Tony and AvE would be proud!

@namtech425 6 ай бұрын

I am stunned, I don't have a response to this, you have so many skills. The patience this took is amazing. You can be very proud of this, well done. I am guessing it's so well built that your grand children will be using it well after you are gone.

@OzonoOzono Жыл бұрын

Leaving just a like doesn't make justice to watch your amazing work, I’ve seen some others homemade lathes, but this is definitely the most professional one, outstanding professional mastership you have young man

@marcoschwanenberger3127 2 жыл бұрын

Its absolutely insane that it works as well as it does. If you just made a Steel part with it, handed it to me and told me it was cut on a homemade lathe, built using only angle grinders, I wouldn't believe you one bit. Hats off! Cant wait for the milling machine :p

@achilleaustin 2 жыл бұрын

I’d be very impressed if he could pull off a decent mill, as I can’t see how you could build the table with just an angle grinder. Additionally, he wouldn’t have much use for a mill as he doesn’t need lots of high precision parts in his projects. He’s already showed what a good surfacing job he can do with just an angle grinder and a jig.If he did do it, I’ve got no doubt he would pull it off

@nathaniellangston5130 2 жыл бұрын

Your ability to problem-solve for not having expensive tools never ceases to amaze! Dare I say you technically even have "Surface Ground" ways on your lathe!

@Mosshemcreations 5 ай бұрын

You made something beautiful. Wow! Utterly flabbergasted by the ingenuity! 🥰 Good job Sir!

@gengen-vx8li Ай бұрын

I have never seen anything like this done by one man with a few tools. You are very skilled, hardworking and talented. Congratulations!❤❤❤

@MJPilote 2 жыл бұрын

One of the best videos showing the fact: if there's a will there's a way! Please wear a respirator when cutting so much with angle grinder. That stone ash is carcinogenic. Awesome work!

@domkelly1972 2 жыл бұрын

i fully expected to watch this and find that he bought the rails and crosslide.. etc. This has to be one of the best builds i have ever seen. The way he preloaded the spindle bearings was brilliant.

@ledegraw Жыл бұрын

Start to finish class A project and awesome video delivery. You said heavy duty and you delivered heavy duty quality.

@daveawb 2 жыл бұрын

Wow, hands down one of the best homemade lathes I have seen made on KZfaq... I'm speechless. You have a very bright future!

@Joao-uj9km 2 жыл бұрын

Let me add and a very bright present :D

@C_Dana 2 жыл бұрын

What an accomplishment! Gives me new faith in the next generation. I was going to ask how many sanding disks you used but then I saw the infinity symbol! I figured it was a lot. I tip my hat to you sir, a true fabricator and machinist. All I can say is wow...probably the most impressive KZfaq video I've ever seen.

@homemade_madness 2 жыл бұрын

Thanks man!!🤟🏼🤟🏼

@tantamounted 2 жыл бұрын

Just before I watched this video, I literally watched a video from Fireball Tool, showing the way you use a cutting wheel can make a difference in how long it lasts. Still, I'll bet all that surface polishing took up a ton of discs.

@krisbuildit5149 2 жыл бұрын

You kick ass. Don't ever stop. I agree with this guy!

@DanielWatson-sq1sg 4 ай бұрын

A real craftsman! Cuts,drills and machines his own parts by hand. Grinding out those channels must have been an absolute chore! Very nice work man! 👌🏻 Well done!

@randaldell-spector4809 Жыл бұрын

Sensational mate, I almost want to watch it all again!

@normanlongthorp8763 2 жыл бұрын

This is absolutely amazing. I can barely get my head around the idea of how to USE a machinist's lathe, and this dude is freakin' BUILDING one - with tools and materials from Harbor Freight! SMH serious kudos to you, my friend. Hats off big time.

@tommasoferroglio6533 2 жыл бұрын

As an aerospace engineer let me say: just impressed!! Well done dude.

@edrolconpe Жыл бұрын

Nunca me he sentido más satisfecho de dar un like. Eres un joven impresionante; el mundo necesita más hombres como Tú.

@kentswan3230 2 жыл бұрын

You've made a useful machine tool using relatively primitive but available hand power tools along with some intelligent design choices, ingenious fixturing then using the partially completed tool to fabricate additional parts of the tool effectively redefining what it means to build a machine shop from scratch. The precision appears to be reasonable for your purposes though the tailstock drill chuck appeared to be a bit on the wobbly side. Refining what you've done is using the machine to make itself and in the future make itself better. Congrats on using common materials to do this. You're an inspiration.

@kalleklp7291 2 жыл бұрын

I'm a blacksmith and machinist and I must say you did an excellent job with basic tools everyone can afford. You're a very talented young man and you can get a loooooong way with these skills. :)

@nelqui7685 Жыл бұрын

An incredible work requires a lot of knowledge in the segment and creativity too, congratulations.

@Charlesredporsche Жыл бұрын

I wouldn’t have believed this could be done. Bravo!

@russelthomson5065 2 жыл бұрын

Definately the very best build on KZfaq. Well done man!! I'll be watching this again and again! Absolutely bloody inspiring!

@perrylatham7007 2 жыл бұрын

This has to be the most impressive build I've watched, especially with limited tools. You should be very proud of yourself.

@bryanford1139 Жыл бұрын

Excellent job fella!!.....I'm totally stealing the angle cross-slide part of this build for my old lathe that doesn't have one... THANX!!

@9modified Жыл бұрын

Best thing ever to be put on KZfaq. Great great job. I'm very impressed!

@maniestrijdom7271 2 жыл бұрын

I loved the car build you did but this is completely madness, this is final year engineering with 100% PASS👍

@AMBOSS_Silesia 2 жыл бұрын

One of the most awesome builds I've ever seen so far. This is just great.

@Jeremy-fy1sz Жыл бұрын

Creating all those jigs to turn hand tools into precision machining instruments is genius and true dedication to the project. Spectacular work. I'm tempted to try myself unless lathe prices drop back down some more.

@henrydando Жыл бұрын

This by far is not a precise lathe, it is a lathe, but really only good for decrotive or very lose tolerance machining. A proper lathe could be built with simple hand tools, by using the Whitworth 3 plates method to create a flat reference surface and then hand scrapping the bed ways flat..

@ahmedtaharmadan Жыл бұрын

Very well made, powerful lathe with normal capabilities. I salute you

@epeh4213 2 жыл бұрын

It's just perfect... the design, the materials, the sizes... perfect. 200 hours of build time is quite long but it's all worth it. Congratulations!.We'll done

@robh3267 2 жыл бұрын

I don't even know where to begin, this is literally the definition of "where there is a will there is a way", your truing jigs were simple, precise, effective and absolutely brilliant, to think you did this without a basic drill-press and chain drilling the slots by hand in that heavy of plate steel is where the Madness part of your channel name comes from, using parts from the treadmill was creative and saved you a lot of money, outstanding work.

@homemade_madness 2 жыл бұрын

Thanks!