Honda CT70 K1 - video #2, disassembly…..and broken parts.

Рет қаралды 2,453

2 ай бұрын

Thanks for watching. This is the second video on a Honda CT70K1, that I picked up in Michigan. Very rusty and kinda rotted, I’m attempting to give it be life. In the first video, I got the engine to run. In this video, I finish the disassembly to the bare frame. #HondaCT70 #Trail70 #MiniTrail
Link to video #1: • Can I Get It To Run? ...
Link to video of repairing frame: • Can we save it? …….a r...

Пікірлер: 89

@roderickson8510 6 күн бұрын

When your bike falls of lift and you can still smile shows a classy Guy. Thanks for the videos

@MiniBikeMike 6 күн бұрын

@@roderickson8510 Thanks for watching! They’re still just minibikes to me, nothing to get too worked up about. In the end, it turned out to be a great little bike!

@donsoule6411 2 ай бұрын

Recently, I needed a replacement key for a 1972 Trail 90. The local locksmith was unsuccessful in trying to match a blank to cut new ones. Contacted a Honda Dealer’s parts guy with the key switch code and he happened to have two to send me.

@MiniBikeMike 2 ай бұрын

Mark, from Honda Keys on eBay, is sending me two keys tomorrow.

@Smallbore2wheels Ай бұрын

That trip to sell and ride the new to you bike back home sounds like a hell of a good time

@MiniBikeMike Ай бұрын

Unfortunately, my plans may be changing…..but, I still have something cool happening at that time.

@itsreallytom4310 2 ай бұрын

Love the idea of the road trip. “Bad ideas make for great stories” I’ll be flowing along

@MiniBikeMike 2 ай бұрын

Thanks!

@monkeyroo8740 Ай бұрын

Hiya mike, looking forward to seeing the video on your trip, what a great idea.

@MiniBikeMike Ай бұрын

Unfortunately, my plans may be changing……..but, will still be something cool. I need to see how the next couple weeks play out.

@mikeb6431 2 ай бұрын

The Toppled Tuesday Special. 😎

@MiniBikeMike 2 ай бұрын

👍🏻

@HEMIJJ 2 ай бұрын

Nice work Mike. I always have had luck just searching the lock number on eBay to find Honda keys.

@MiniBikeMike 2 ай бұрын

Yep, Mark from Honda Keys on eBay is sending me two keys.

@donsoule6411 2 ай бұрын

Just a suggestion, in the future, especially when trying to save both pieces… when using heat and penetrating oil, the heat “cracks” the rust bond, then for the penetrant to be effective the part needs to be cool enough for it to flow into the threads. If applied when it’s too hot, it just vaporizes.

@MiniBikeMike 2 ай бұрын

I’ve had just the opposite experience. Without the heat, the penetrating oil does nothing. I feel the heat “sucks” the oil into the threads.

@donsoule6411 2 ай бұрын

@@MiniBikeMike Wasn’t suggesting not using heat… many times that in itself will free a “frozen” screw/bolt. I agree that without heat penetrating oil can often take a long time to soak in, depending on the severity of the corrosion. For those guys without access to a torch, both soaking with penetrating oil and the “beat-it” treatment usually leads to success.

@miscellaneousdon3377 2 ай бұрын

Lazarus would be a good name! Lol

@MiniBikeMike 2 ай бұрын

Yes, it would!

@mikeatv 2 ай бұрын

more PB Blaster....its never enough jmo

@RC-fu6hg 2 ай бұрын

For a second there I thought you were going to weld the nut to the broken bolt and switch from vice grip slipping to a six point box wrench for better leverage. But you had the patience to gently work it off. That was awesome 😎 👍

@MiniBikeMike 2 ай бұрын

Thanks! If you weld the nut, then you heat up the bolt. If you don’t let the bolt cool off, you risk twisting it in two. I figured the timeframe was gonna be about the same, so I kept going with what I was doing.

@norcal8718 2 ай бұрын

Just go to your local locksmith with the key code and he will cut you one. I just had it done to my 1985 Honda vf1000r 👍🏻

@MiniBikeMike 2 ай бұрын

Mark from HondaKeys is fixing me up. Should have two key’s tomorrow. 👍🏻

@gerardkenny8408 Ай бұрын

Awesome job

@MiniBikeMike Ай бұрын

Thanks!

@southeastvintagecyclerescue 2 ай бұрын

Coming together nicely...considering it's level of crusty status. I like the road trip idea. Can't wait to see how it all goes.

@MiniBikeMike 2 ай бұрын

Thanks Patrick!

@tommers00 Ай бұрын

Thats a great idea!

@MiniBikeMike Ай бұрын

Hey Tom!!

@franciscoolvera6871 2 ай бұрын

Red rusty. Never seen you struggle as much in a bike as much as you did with this one to Tare it down . Good job great video like always 👍🏾

@MiniBikeMike Ай бұрын

It put up a good fight. I don’t think I’ve ever used a big hammer, vice grips and a cutoff tool on any bike as much as this one.

@EinarLerschen 2 ай бұрын

Well if it's from a bible camp, I was gona suggest something like a "holy dax" but after watching this video maybe "fallen angel" or "diving dax" would be more suitable :)

@MiniBikeMike 2 ай бұрын

👍🏻

@gerardkenny8408 2 ай бұрын

Mini bike mikes miracle bike

@MiniBikeMike 2 ай бұрын

👍🏻

@user-dk5dr7wh8l Ай бұрын

Call that latest bike. Mother Load #1

@MiniBikeMike Ай бұрын

👍🏻

@AaronMartinCOOLVIDEO 2 ай бұрын

Name it Atoms Rotten Apple.

@MiniBikeMike 2 ай бұрын

👍🏻

@jessefarrar5400 Ай бұрын

Mike; I've had some success with steel stuck in aluminum by using an air chisel with hammer head, seems the vibrations shakes some of the corrosion loose. Might try it sometimes as it has worked for me, just don't go crazy.

@MiniBikeMike Ай бұрын

Thanks

@Messingwiththejohnsons 2 ай бұрын

The Red Roach

@MiniBikeMike 2 ай бұрын

👍🏻

@scotlongyear Ай бұрын

Nickname: Pick of the Litter

@MiniBikeMike Ай бұрын

👍🏻

@gerardkenny8408 Ай бұрын

I got my key and ignitions from sorry I believe it was from chp but maby trail buddy for my 1970 H

@MiniBikeMike Ай бұрын

I have a couple keys coming from Mark at Honda Keys on eBay.

@Sgsl70 2 ай бұрын

When u dropped it, the bolt was scared🤣🤣🤣🤣🤣🤣

@MiniBikeMike 2 ай бұрын

🤣🤣

@iancameron198 2 ай бұрын

What price you gonna ask for the bike at Portland

@MiniBikeMike 2 ай бұрын

@iancameron198 Not sure yet. I need to finish it and see how it looks/rides.

@kevinrein7853 Ай бұрын

I think the name of the key supplier i used was actually honda keys

@MiniBikeMike Ай бұрын

Yes, I contacted Mark at Honda Keys and should have two keys today or tomorrow.

@170bcuda 2 ай бұрын

Red Rooster

@MiniBikeMike 2 ай бұрын

👍🏻

@donaldkaderis5524 2 ай бұрын

How about Holy Roller…..

@MiniBikeMike 2 ай бұрын

👍🏻

@seanireland5738 2 ай бұрын

Holy Red 70

@MiniBikeMike 2 ай бұрын

👍🏻

@THOMAS-ot7qx Ай бұрын

Excellent video Mike, love the channel. Do you rebuild these bikes and sell some of them?

@MiniBikeMike Ай бұрын

I sell most of them thru the channel. This bike will be posted For Sale in the next video, when it gets posted tomorrow.

@THOMAS-ot7qx Ай бұрын

@@MiniBikeMike Great Mike, we'll talk again. Keep up your good work!

@robbedv Ай бұрын

Hey Mike, my name is Robbe and i'm from Belgium. I love your videos and the Honda ct70's you restore. Unfortunately it is hard to get a original Honda ct70 here in Belgium because they are very rare here. It is my dream to have one some day. I have 2 Honda dax'es they are the 50cc versions but i want to expand my collection. So my question is , would it be possible and make my dream come true for a faire price for one of your bikes? Thank you in advance! With kind regards from Belgium Robbe

@MiniBikeMike Ай бұрын

I sell all my bikes thru the KZfaq channel. I make a video to show the bike and it’s price. If you’re interested in a bike, watch for sale videos and contact when ready to buy.

@johnoconnor5581 2 ай бұрын

Hey Mike, what do you generally do regarding a badly damaged round speedometer (not part of the headlight bucket like the earlier ones or the 91-94 models). Good used round ones are hard to find and very expensive. Damaged ones can be reconditioned but it is a fair amount of work. Is there an aftermarket one you have found that is a good replacement? I recently picked up a pretty decent used Ruckus speedo for $25 thinking it might be an option. They are in decent supply both new and used and are affordable. The Ruckus speedo is slightly smaller in diameter. The Ruckus has 10” wheels so the calibration may be the same as CT70. Or do you replace the round speedo and headlight bucket with the aftermarket combination units? John from San Antonio

@MiniBikeMike 2 ай бұрын

Those rounds speedo are ridiculous in price…. costing more than I paid for the bike I’m currently working on. Fortunately, I’m not purist, so using a speedo off something else is no big deal to me. Plus, since I install Lifan’s most of the time, the original 50mph speedo doesn’t go high enough. Because I like the look of having a speedo, I try to install something, whether it works or not. I use a Meilan GPS speedo most of the time, so I don’t really care if the mounted speedo works or not. I’m not sure what speedo I used on the current K1 bike I’m building. I believe it’s off a CL175 or SL125 or something. Because it’s slightly larger in diameter, than stock, I had to design a different bracket to hold it.

@josemartinez-br4rg 2 ай бұрын

is it safe to store a motorcycle without gas in it inside a garage? I heard mixed responses as sitting without gas can cause rust in gas tank, but gas can also go bad eventually and rust the tank too. what do you recommend?

@MiniBikeMike 2 ай бұрын

I keep fuel in my tanks.

@jeffferguson899 2 ай бұрын

name suggestion old crusty

@MiniBikeMike 2 ай бұрын

👍🏻

@genekelley7579 2 ай бұрын

🛑🛑 Well since the bike was from a Church Camp, and Jesus brought Lazarus back from the dead….. and the bike was basically dead, till Mini Bike Mike arrived on the scene…. How about the name LAZARUS??? 😂👍💯

@MiniBikeMike 2 ай бұрын

👍🏻

@cainbeeping8480 Ай бұрын

It sucks that it fell and broke the case.

@MiniBikeMike Ай бұрын

Yeah. Fortunately, it’s an easy case to replace.

@idiot-proofgarage3739 2 ай бұрын

CTurd70

@MiniBikeMike 2 ай бұрын

👍🏻

@TheCbxmaster Ай бұрын

But when you do that, you have to switch the whole wiring harness, don’t you

@MiniBikeMike Ай бұрын

If I were building it to stay with an aftermarket 12v engine, yes, I’d swap the harness. In this case, I’m leaving the original wiring harness in place. I’ll swap headlight and taillight bulbs to 12v. I’ll put a 12v battery in it and run a hot wire directly to the foot brake switch and the running light. The battery should last the 150 mile trip. For the headlight, I’ll zip tie a regulator somewhere easy to access and run a wire from engine to regulator and then to the headlight. All easy to unplug when I get there and plug in the stock harness.

@TheCbxmaster Ай бұрын

Every time you hit that bolt I could see it move. I’m thinking of sending you some tie downs 😅😂