Honda Cub C70 wide tire [EPISODE 4] 2019

Рет қаралды 132,197

6 жыл бұрын

EPISODE 1:
• Honda Cub C70 C90 craz...
EPISODE 2:
• Honda Cub C70 Racing B...
EPISODE 3:
• Honda C70 wide fender ...
EPISODE 4:
• Honda Cub C70 wide tir...
EPISODE 5:
• Honda C70 tear down [E...
This episode 4 of the Honda Streetcub build series was mega drawn out. I filmed everyday for 10 days in my spare time. I finally accomplished the rear end set up! Sooo many small details. I am excited I finished it! Not to mention I had some major editing issues. This is the result of 8 hours of editing. Taking 2 hours of film and pressing it into 40 min. :-) I will post a lot of this parts in my Patreon page. If you own a Honda c70 or c90 cub / passport these series will guide you through the how to.
BE SURE TO SUBSCRIBE TO OUR CHANNEL!!!!!

Пікірлер: 117

@mohdazreen938 Жыл бұрын

Probably a bit too late to discover your video. But it sparked my spirit to get my project bike done! You just earned a new subscriber. Thank you sir!

@GrozaBathrust 3 жыл бұрын

I am anxious with your work table. lol.

@GiancarloFloyd 4 жыл бұрын

Man I've always like the look of hub style brakes, without a rotor and caliper it really cleans the wheels up.

@renegade1987 6 жыл бұрын

thanks, looking forward to episode 5, great build.

@iiirwtiii 6 жыл бұрын

Hey dude, just watched all 4 cub videos. Thanks for sharing. Gives me motivation to work on my 3 Honda minis. "Gonna be sweet!!" Glad I found your channel.

@phreshnphunky 6 жыл бұрын

Glad you took my advice and got the offset drive sprocket. Shame it didn't measure up to what would work for you. Hopefully it all balances out for you in the end. Keep up the good work!

@markerasmus 5 жыл бұрын

What a cool series! You mentioned link to the parts but I couldn't find it. (Funnily enough I just posted a similar questions in the previous episode so I got excited when you mentioned a link.)

@markerasmus 5 жыл бұрын

And you have my vote on a Honda CB cafe racer for sure..!

@lefteristrellopoulos8879 6 жыл бұрын

Yess im waiting for this video a lot of time

@RollingWrench 6 жыл бұрын

This was a huge process! Maybe 20 hours worth of wrenching and editing :-) Thanks for watching !!!

@heritagehillsecurity8778 Жыл бұрын

It is wonderful to find this five years later. ❤️

@maxstratigos2267 6 жыл бұрын

Great build , proud owner of 2 Honda Street Cub's ( here in Greece is called C50 or Glx ) , looking forward to episode 5 .. I think it's easier to purchase an Kepspeed or what other wide front fork you can find.. Greeting from Greece and keep up the good work.. Next build Café racer ☕️ 🏍 ✅

@ektoz 6 жыл бұрын

Wow you are on the limits with those gaps!! nice work looks really sweet!. Yes bud café racer is a must. I wish I was near helping you with those parts on my lathe. Get that ep.5 soon leave that rockus after!

@RollingWrench 6 жыл бұрын

Thanks for watching! It’s been a fun one :-)

@flyingpond 6 жыл бұрын

I love the vintage builds... much cooler than the Chinese scooters or even the Ruckus. Some sort of cafe racer would be cool to see. I have a '83 Honda Urban Express. I would love to see what you could do with that. That might be a cool bike for you to pick up and do a series on.

@thetimelapseman8494 6 жыл бұрын

Looks great. I was just in SE Asia for the last 3 months. Totally agree about the proliferation of these bikes. Also the small sub-200 cafe bikes look like a lot of fun. I wonder about the offset sprocket. When I built my rat cub C105T a few years ago, the case on the pit bike motor was wider. IIRC it might have been because the case has an extra gear. You might want to test fit that sucker asap. SCHWEEET!!!

@mrshhh7841 3 жыл бұрын

Your a god damned artist ! I’m so impressed with this build

@losminatoatlanta3164 4 жыл бұрын

In Dominican republic you will find the best and the faster super cub we love those thing

@nueybeebbudwong7538 6 жыл бұрын

Hello from Thailand, can't wait to see episode 5

@RollingWrench 6 жыл бұрын

I looove Thailand!!! 🙏

@nueybeebbudwong7538 6 жыл бұрын

My home town in Rayong Thailand, Where did you go to in thailand?

@heritagehillsecurity8778 Жыл бұрын

Hello, from Ivine California.

@avs3333 6 жыл бұрын

Sweet. Take your time Matt putting out these videos.

@RollingWrench 6 жыл бұрын

Hey Greg! How you been?

@avs3333 6 жыл бұрын

Rolling Wrench I'm doing great rediscovering life.

@RollingWrench 6 жыл бұрын

Niiice! Let me k ow of you need anything :-)

@dhineshdevanvadivello3708 6 жыл бұрын

Yes please, I thought about building street cub C70, I found your channel. Good examples for home built.. Then I thought about customiz my old cb100 into cafe racer.. And you are thinking about building one.. Damm cool man..

@RollingWrench 6 жыл бұрын

Sweeet! Thanks for watching! I’m looking forward to finishing this project up :-)

@firdaushamdanfirdaus6425 6 жыл бұрын

In malaysia..borneo island call sarawak..we rebuild and doing some restoration custom build..and you can find a lot aftermarket part for you to mix and match with..just for an example..you can add front and rear disc brake from other bike with same model..

@davidgordon3332 3 жыл бұрын

Where can i order parts to use from there

@heritagehillsecurity8778 Жыл бұрын

Coming together so sweet. You mentioned maybe putting a Gom motor in. Any recommendations for an ultra reliable C70 big bore kit? 88 cc kit, perhaps? I was wondering if the newer larger piston would weigh the same as the original to keep balance. Any thoughts on insights would be very much appreciated. I've really enjoyed watching stuff on your channel recently, the Honda Metropolitan. Thank you

@626nandy 6 жыл бұрын

Great work!!!!!!

@Hui9697 6 жыл бұрын

I hope it's not too late. The centre hole of the rear sprocket should be a nice fit to the hub, it's this that takes all the loading not the bolts, they are there only to hold the sprocket from falling off. Your set up means the DIY store bolts will shear pretty quick and cause untold damage to the bike, or worse.

@darylynn621 6 жыл бұрын

Try a hydraulic jack to open the rear fender well. Don't sweat the chain till after you install the bigger engine. Chain needs 1/2 up and down. Play after run in. I am 66 and started building when I was 11 Puch moped then Harley Hummer 125 cc. I ran my own repair shop from 17 to 25 while in school and also worked for the local dealers at the same time doing critical work boring etc. Cheers OM from Texas. PS I also build accoustic stringed instruments mm

@heritagehillsecurity8778 Жыл бұрын

Was the Harley Hummer a two-stroke based/like a DKW?

@tomdrew4589 6 жыл бұрын

Looks like by attaching the hub to the swing arm you'll get braking under suspension compression. Hence why others sway the hub back to the frame with the long arm.

@Mrsofflords 6 жыл бұрын

Ficou Massa Veiiii,Toppp Muito bom,Quero Ver Ela prontaa rodandooo👍👍👍👍

@rodrigovitorino3840 6 жыл бұрын

Amazing video.

@ricardomaya510 6 жыл бұрын

doing great

@Yelwas 6 жыл бұрын

Making these comments as I watch, so they might not be all necessary... 11:56 I had forgotten about this detail, thank you for pointing this out. 24:25 the brake anchor rod is under tension when the brake is operated. 25:46 you can NOT have a bend in the operating rod, otherwise when you operate the brake, it will attempt to straighten the rod. 26:47 you should edge prep the material prior to welding. 28:20 What... why do you think Mr Honda had a long bar?

@paulfrank1158 5 жыл бұрын

Yeah I am really digging the super cub build love your fab job on the handle bars and was looking at the new ones at the Honda dealer which are around $3,500.00 new but really around 5 g's to get them out of the store after taxes and build fee even know there together on the floor here in Florida. As far as another build I would love to see you do around a "2000" Honda Elite SR 2 stroke build cause they are sweeeeet! Or a 80's Honda Aero 80 build. JS Love the vintage stuff too Matt!!!

@RollingWrench 5 жыл бұрын

Build is always better and more rewarding than buying. Thanks for the support 🙏. I can’t wait to finish this thing !!!

@karlalton3170 4 жыл бұрын

Were do you get the offset front sprockets from Steve leave a link please 👍👍

@CharlieFrank13 6 жыл бұрын

Def Cafe Racer next 😎👍

@alanscott989 6 жыл бұрын

Nice build you got going on there . One thing concerns me so far , the clearance for the rear tire to the fender , first bump in the road and that tire could smash into the fender and lock the wheel up . You could of course have solid struts made so you keep the look you have now , or make a fresh cut in the fender . Try sitting on the bike and see how much the rear end drops , then check the tyre for clearance

@cerritoser 2 ай бұрын

friend ! What earrings did you use? what measurement?

@AZ-qn3xq 2 жыл бұрын

Hello. Can you post links where did you buy the parts. Thank you.

@moliyo 6 жыл бұрын

Imperial beer, all the way from Costa Rica

@hafizultaqwa9726 5 жыл бұрын

I love your video !

@jeanpierrecamilleri2526 6 жыл бұрын

what size of tyres and rims u used in the front and back plz

@alexcoocustom5680 5 жыл бұрын

hello i'm a big fan of your page i'm doing myself in the same project a Honda so 70 with supermotard rims i would have a small question i would have liked to know where did you buy the pinion that is on the block motor because I have the same problem that you thank you very much for your answer thank you 😉

@markleandreycaparros2947 5 жыл бұрын

hello from philippines nice project!

@heritagehillsecurity8778 Жыл бұрын

Hello, from Irvine California. 🤠

@kambo209 6 жыл бұрын

what do you think of the lifan 160?

@J-S-Pears 6 жыл бұрын

Wow. Have my Ruckus now, but this would be an awesome vintage cruiser... Actually have a chance to pick up a C70 right now running and riding 6/10 with an extra parts bike 3/10 for $550. Are they worth it in stock form? How doing mods? Expensive?

@JahR96732 3 жыл бұрын

Aloha do a Honda super cub c125 build would be sick

@ianmcgarrigle9510 6 жыл бұрын

just got to the end ,, your getting there well done ,,ps the chain is too tight .. in the middle of the chain you want aprox 20mm of up and down play ,, when you sit on the cub as it is now it will tighten up causing chain . sprocket , and output shaft bearing damage .

@babigudi8695 6 жыл бұрын

when will you make the episode 5

@baymax-ej8vg 4 жыл бұрын

Where you get front grear?

@avrillioofficial2235 6 жыл бұрын

Very nice.....

@user-xw1cu5it3s 6 жыл бұрын

ขอบคุณครับ

@avs3333 6 жыл бұрын

Matt what up?? When will episode 5 come ou??

@davidgordon3332 3 жыл бұрын

Im still trying to find links for pars wheels and swingarm 🧐🧐

@magegamer632 2 жыл бұрын

You still have that 7mm engine sprocket? 😁

@briancaulfield1524 4 жыл бұрын

You should chop a simson schwalbe and throw some ape hangers on it. 🤘🤙

@stephanhipwell 6 жыл бұрын

Good use of limited tooling. He who can n that. My 2c is that tiny bar for the rear hub. The angle looks wrong to me. It might not fail but I'd be running a geometry closer to the stock setup. Otherwise good work.

@angelbatir7451 6 жыл бұрын

What size of rim and tire at the back

@MatiasLopezSgo 6 жыл бұрын

I need more vídeos of that cub

@RollingWrench 6 жыл бұрын

They are coming. Hopefully soon :/)

@raffyfulgencio5254 4 жыл бұрын

goodluck

@Aliesya_luna123 2 жыл бұрын

Why your pusher brake dnt hve a spring.

@ianmcgarrigle9510 6 жыл бұрын

check the comments on the last video ,,i sent link to the shock top extensions as well as the offset sprocket :)

@jaycenabre9899 6 жыл бұрын

nice build...

@RollingWrench 6 жыл бұрын

Thank you :-)

@gorgiev2243 6 жыл бұрын

do an aprilia sr 50 build or a malaguti f12

@Georxs 6 жыл бұрын

Great video, great ideas, only thing just would be worried about is the sprocket bolts coming loose and ruining the swinging arm. (Due to them being so close.

@RollingWrench 6 жыл бұрын

Thank you! Remember the sprocket bolts have the folding tabs the lock them in for safety.

@paulcal6476 6 жыл бұрын

Any update sir? From Philippines..

@saidfaisal135 4 жыл бұрын

Please help us with web links to buy the parts

@dannyarceosantos6160 2 жыл бұрын

always beautiful.....but always have a problem bro

@babigudi8695 6 жыл бұрын

episode 5 plz

@ezanchannel9103 4 жыл бұрын

in malaysia we call it streetcup u can try serch..

@joyo2593 6 жыл бұрын

Semangat ,,,!!!

@terrenceyap5937 6 жыл бұрын

There are tons of big motorcycle in Asia, just people wanted to have kind of antique moped to be done

@RollingWrench 6 жыл бұрын

I saw a few but nothing like scooters and cubs

@assassincreed8491 6 жыл бұрын

Do a cafe racer scooter would look nice

@georgegordon7455 6 жыл бұрын

if you had centered the swing arm on the chassis with equal spacers on either side, you wouldn't have had all the clearence problems. and centered the wheel the same way with equal spacers

@rodrigovitorino3840 6 жыл бұрын

Could you please share the size of yours tire and wheels?

@RollingWrench 6 жыл бұрын

The wheels are front 17x3.50 rear 17x4.25 front tire is a 130x60x17 rear tire 160x60x17

@dantheflyinman1576 6 жыл бұрын

yea i understad about the sprocket...but who farted?

@jeffdavies688 5 жыл бұрын

Do a virago 920 Cafe racer..

@markskupinski4009 6 жыл бұрын

Where you those rims from??

@RollingWrench 6 жыл бұрын

They are racing boy rims and spokes, they are stock hubs

@markskupinski4009 6 жыл бұрын

And how much where they??

@JT-wg5gm 6 жыл бұрын

Probeby need a new swing arm

@34Kuro 6 жыл бұрын

this puppy, this guy, that guy pfff

@user-kp3xp5md8u 3 жыл бұрын

ผมชอบVDO.นี้ขอชมต่อไปเรื่อยๆนะครับจะกดlikeและติดตามให้ด้วย

@gordonmclees260 6 жыл бұрын

You can buy an offset front sprocket, off the shelf in uk ! at minibikecraze.co.uk

@MrKubbler 6 жыл бұрын

Motorized BMX bike

@suchasreallife 6 жыл бұрын

Not enough tire clearance

@anthonyhorn1254 6 жыл бұрын

You should have stretched it

@hodakalover 6 жыл бұрын

I thought it was Elton John that had 5000 eyeglasses....

@samm3838 6 жыл бұрын

A 140mm rear tire would have made this much easier.

@RollingWrench 6 жыл бұрын

If had to do it over again, I would do that :-)

@samm3838 6 жыл бұрын

I love the bike. I’ve been looking into a Super Cub BMX build myself. The problem is finding a suitable donor bike. Can’t wait for the next episode of your build.

@CharlieFrank13 6 жыл бұрын

If I had your workshop I would either do a cafe racer or even better a retro scrambler. Lots of old Honda CX500 and Yamaha SR500 has being customised at the moment 😎 One of my favourites here..... www.bikeexif.com/1978-yamaha-sr500

@mezzaiahmed6584 6 жыл бұрын

BAJA

@harnasbray9216 6 жыл бұрын

Hci indonesia

@CJLeTeff 6 жыл бұрын

Less talking and more wrenching would be nice

@RollingWrench 6 жыл бұрын

Thanks for the input 🙏

@djako3168 6 жыл бұрын

Death trap . Hope you dont plan on actually riding this thing.

@RollingWrench 6 жыл бұрын

O come on Dale. Why would you say that?

@djako3168 6 жыл бұрын

Not trying to be negative mate but I dont think you have given enough thought to clearances and alignment issues, there will always be some flex and movement in the swinging arm and the tire also flexes and swells , the suspension moves quite a bit, the chain slaps. Many issues to consider . As is I can see serious consequences.

@raffyfulgencio5254 4 жыл бұрын

goodluck