Honda Element Clutch Diagnosis and Replacement

Рет қаралды 73,193

3 жыл бұрын

My brothers 2005 Honda Element was having a strange issue with the clutch. Even with the pedal depressed, it seemed like the clutch was still engaged making it difficult to shift gears.
In this video I diagnose the problem and replace the clutch. For additional information on this job, see the engine replacement videos linked below.
Thanks for watching!
#ETCGVideo #Clutch #Transmission
Become a Premium Member of EricTheCarGuy.com: www.ericthecarguy.com/why-bec...
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
EricTheCarGuy FAQ Page: www.ericthecarguy.com/faq/
Check out my ETCG1 channel: kzfaq.info?su...
Music
Fiesta De La Vida by Aaron Kenney (KZfaq Music)
Tools
Bolt Biter™ Sockets from GEARWRENCH: cms.gearwrench.com/page/boltb...
CAT Plug Kit: parts.cat.com/en/catcorp/shop...
Brake Cleaner Sprayer: www.jbtoolsales.com/titan-too...
Brake Cleaner: www.amazon.com/gp/product/B00...
Hood Prop Tool: www.jbtools.com/lisle-46170-h...
Milwaukee 1/2”: milwaukeetool.com/Products/Po...
IR 3/8” Impact: www.ingersollrand.com/en-us/p...
Mayhew Large Pry bar: mayhew.com/product/14124-the-...
Parts
Exedy Clutch Kit: HCK1004
CAT Security Converter Shield: getcatsecurity.com/purchase-o...
Related Videos
How To Fix a Dead Clutch Pedal: • How To Fix a Dead Clut...
Honda Element Engine Replacement and Restoration (Part 1): • Honda Element Engine R...
Honda Element Engine Replacement and Restoration (Part 2): • Honda Element Engine R...
Honda K Series Fail, What Went Wrong?: • Honda K Series Fail, W...
01-05 Honda Civic Manual Transmission Rebuild: • 01-05 Honda Civic Manu...
I Just Bought 2 Honda Elements: • I Just Bought 2 Honda ...
Fixing Up My Brothers Rusty Element: • Fixing Up My Brothers ...
How a Clutch Works: • Learn How A Clutch Wor...
How To Diagnose a Bad Clutch: • How to Diagnose A Bad ...
How To Adjust a Cable Operated Clutch: • How To Adjust A Cable ...
How To Change Honda Manual Transmission Fluid: • How To Change Honda Ma...
Replacing Clutch Hydraulics Honda Civic: • How To Replace Clutch ...
Replacing Clutch Hydraulics Acura CL (Honda Accord): • Replacing Clutch Hydra...
Element Video Playlist: • I Just Bought 2 Honda ...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 318

@a.m.v.6938 3 жыл бұрын

Dang that’s a lot of work because someone took some shortcuts…..that’s why I do all my repairs on my cars, it’s hard to find a good mechanic you can trust. There are only a few Eric’s out there. 😊

@leonardoalfaro6007 3 жыл бұрын

Nothing like the satisfaction of doing things yourself and well done

@PJBonoVox 3 жыл бұрын

@@leonardoalfaro6007 This looks like a brutal job if you're up on jackstands working in the floor though. Eeesh.

@kenabi 3 жыл бұрын

i subscribe to the tavarish school of thought on this; i am my own warranty. ... i tend to avoid the whole buying crashed supercars part though. we'll ignore the fact that i've rebuilt two of my last daily drivers pretty much from the ground up. that's clearrrrly not relevant to tavarish.

@PJBonoVox 3 жыл бұрын

@@kenabi Never heard of him till now. The channel looks real click baity though. Is it any good?

@kenabi 3 жыл бұрын

@@PJBonoVox mixed. some its pretty cool just from a 'neato' perspective, but he does like, 95-98% of all the work to the vehicles in house between him and jared pink. and then yeah, some of its just flat clickbaity. and even some of that's entertaining.

@labradormcgraw 3 жыл бұрын

The first ETCG video I ever watched was on a Ford Focus clutch replacement. Five years on, and I still enjoy a proper nuts & bolts ETCG clutch replacement video - clearly, he hasn't lost his touch. Still the best on KZfaq.

@ericthecarguy 3 жыл бұрын

As the kids would say, "it's clutch". Always great to see you.

@createachanneltopost 3 жыл бұрын

You're very good to your brother!

@late0404 3 жыл бұрын

You are your brothers keeper

@AntonioClaudioMichael 3 жыл бұрын

The flex on that breaker bar is insane flexzilla 😱🤣🤣 @9:08 @EricTheCarGuy

@calholli 3 жыл бұрын

spring steel

@VeritasEtAequitas 3 жыл бұрын

Right? It's making me cringe. I know all these sensations, bolts about to snap, bad threads. Lol

@squirrelnut 3 жыл бұрын

You saving the old clutch from your car to fix your brother's is a real clutch move.

@roostercogburn7243 3 жыл бұрын

I changed 4 clutches on my 1980 Honda Accord I had. I put a Japanese used engine in it and it didn't have a place for the pilot bearing in the back of the crank. The springs would fall out and would stay in gear. Cost me a red light ticket once. In 81 they incorporated the pilot bearing into the transmission. I wasn't smart enough back then to go get an 81 standard transmission and fix it right.

@Madmike772 3 жыл бұрын

That breaker bar bend was real! damn

@matthewnorris203 18 күн бұрын

Eric needs a Grammy for his soundtrack choices. 😂 No but seriously, I like that you don’t play hype music. It’s unique. Keep it up :)

@snake211987 3 жыл бұрын

Fantastic musical choice, Eric!

@danhendershot8511 3 жыл бұрын

Gotta love Exedy clutches. They just work. I only install Exedy in my and my friends' and family's Hondas. Good job Eric!

@palitopolo232 3 жыл бұрын

Thanks Eric for the new videos.

@OlanHodges 3 жыл бұрын

The "new" throwout bearing looks taller to me but it could be the angle of the camera. Crazy issue and glad you got it resolved! I learn alot from your videos!

@martinsteele3259 3 жыл бұрын

Eric, you sounded so happy at the end of this video! Awesome work that you do!

@ericthecarguy 3 жыл бұрын

I was very happy I didn't have to take the transmission back out.

@HouseCallAutoRepair 3 жыл бұрын

@@ericthecarguy Once a decade is plenty!

@HUBBABUBBADOOPYDOOP 3 жыл бұрын

Thanks for another great video, ETCG!

@sjors7750 2 жыл бұрын

Good job Eric. Respect for the job.

@danielhowiesr.2593 3 жыл бұрын

You're a great brother, Eric!

@teaganroehl 3 жыл бұрын

When someone says we don't have that clutch in stock but I got one that should work 🤣

@vdog4799 3 жыл бұрын

Hey Bro. Your on your way to your 2m mark! Your one of the best out there Eric. Ive been a fan almost from the start. I remember your 500 subscriber video! I am so sorry i didnt renew my prmeum membership on time awhile back. I was late and the price went up. Still love you man! God Bless

@ericthecarguy 3 жыл бұрын

Indeed I am, thank you for your part in that. No worries on the PM. Life happens. Thanks for watching and for your comment.

@johnreid859 3 жыл бұрын

A lot of work! Hope your brother appreciates you.👍🏻

@yafois988 3 жыл бұрын

In todays “Element” of surprise, Eric removes a buncha pieces of plastic . . .

@Earth29431 3 жыл бұрын

Thank you for the awesome tutorial Eric.👍

@MrWilliam.Stewart 3 жыл бұрын

Bad clutch, good guy. Ezzaaaa is a living legend.

@benjaminwilliams3568 3 жыл бұрын

Eric you ARE Amazing glad you got it fixed. That is a lot of work for one person and you stayed the course. You and I are close to the same age and I was exhausted for you. There's NOOOOO way I would Home garage try to repair my 02 Accord LX with a Five speed manual. At our age I'm about paying a qualified Honda Specialist. When I was in my 30's and fresh out of the Army I did that kind of car work in my home garage and I was ok. But now Nooooo sir. Great vid Eric. Great Vid.

@emindedf0 3 жыл бұрын

Great work!

@Bigbacon 3 жыл бұрын

like having the old Eric back

@dougl409 2 жыл бұрын

Amazing job!

@BabcoxMedia 3 жыл бұрын

Ha! Wrong clutch! #ProblemSolved! Great video, Eric! Your brother is lucky to have you.

@ericthecarguy 3 жыл бұрын

I'm lucky to have him too.

@jhuntosgarage 3 жыл бұрын

I have watched and I have learned. Thanks for sharing!

@ericthecarguy 3 жыл бұрын

Thanks for watching!

@SamuelShaw-po8zo 10 ай бұрын

Thanks you, Eric!

@krASHExxx 3 жыл бұрын

I liked that time-lapse music!

@stevenwarner7348 2 жыл бұрын

Thanks for this so much! Amazing to see the diagnostic shift from the hydraulics to the clutch. Seems like it all was needed. My only comment is (with great appreciation for your work) that...~~ Whenever I'm under my vehicles with "whatever" and have exposed areas of RUST ~~~. I'm there with the RUST-OLEUM !!! Every time. I know that control of body rust is not the topic but for my vehicles ~~ all over 20 years old ~~ here in New England, it is a never ending battle. Just a one bay workspace. (Just saying.) Thanks so much for this !!!

@vijayantgovender2045 3 жыл бұрын

Thank you Eric love watching your wonderful videos I am from South Africa and very entertaining

@ericthecarguy 3 жыл бұрын

Thanks for watching!

@Dave.S.TT600 3 жыл бұрын

Thanks Eric!

@ratagris21 3 жыл бұрын

Great video. Quoting MCM the wrong g clutch goes "in the bin!"

@maartenyzer4121 3 жыл бұрын

nice job fine result ,satisfies

@rmay.1583 3 жыл бұрын

Great video thank you

@samuelandrade9246 3 жыл бұрын

Nice job!

@PhillyDee215 3 жыл бұрын

Eric is the clutch master of Hondas😉

@petecurran3995 3 жыл бұрын

Nice 1 Eric! It must indeed take a special type to install the WRONG clutch!

@vinces8974 3 жыл бұрын

Nice video , Ty

@fire7765 3 жыл бұрын

Great job

@Asomesauc 3 жыл бұрын

It is always very very nice when you fix something and it is fixed like you did what you thought was going to fix it and it worked and it wasn't something else or something else or something else or something else OMG

@danhendershot8511 3 жыл бұрын

The last time I bent a breaker bar that far was on an axle nut I had installed previously on my daughter's Accord. It eventually broke at the head end.

@MM_in_Havasu 3 жыл бұрын

Sounds like the disc went potty. Saw your tutorial on replacement of the clutch master/slave cylinder on this car. Great content here!

@ericthecarguy 3 жыл бұрын

It wasn't a disc problem, it was a release problem. The disc was working just fine. I believe the incorrect clutch was installed. Thanks for the comment.

@emptytomb4967 3 жыл бұрын

@@ericthecarguy i hope you do a short video explaining this.

@heyitschinoable 3 жыл бұрын

@@emptytomb4967 yes please Eric!

@crxdelsolsir 2 жыл бұрын

The advantage of having more than 1 of the same car in the family. You can save a part and cover off more than 1 car. Glad your brother also drives a Honda! My one does too. I too am the family mechanic. My family rate is I charge him the parts, even if like this it covers parts that May not have been needed but needed to pin point the issue.

@shawnmercer933 3 жыл бұрын

I have learned from watching eric and south main auto is to always use oem parts because aftermarket parts is not as good as the oem parts.

@forevercomputing 3 жыл бұрын

Sometimes finding out who made the original parts is hard as they've been replaced before you get there.

@ericthecarguy 3 жыл бұрын

Generally true, unless you can find the OE manufacturer. kzfaq.info/get/bejne/raligL1_vpetlWw.html

@frankburn6312 3 жыл бұрын

Luke makes all the clutches for most European cars. Great brand.

@forevercomputing 3 жыл бұрын

@@frankburn6312 LuK makes the friction disc for my Sachs clutch kit.

@MediumHalf 3 жыл бұрын

Man it's a pisser when you get it apart and the problem isn't obvious. Glad it worked out!

@reng223 3 жыл бұрын

Good video! I’m waiting on the Fix it Forward PCM and CAN data cable fix. Those are a PITA and an caused me to get rid of my old car rather than dealing with it. It will be good to learn the etcg fix incase it happens again to another car of mine in the future!!!

@ericthecarguy 3 жыл бұрын

Yea, that's on the list. What I've done so far hasn't fixed it which is why I haven't posted a video about it yet. Hopefully I'll get it sorted in the next week or so.

@reng223 3 жыл бұрын

@@ericthecarguy Good luck with the fix! Thanks for all that you do to help everyone!!!

@fauzisulaiman8578 Жыл бұрын

I'm enjoying it... TQ teacher.

@Indyzato 3 жыл бұрын

This was a great video. All that work just to un-do someone’s screw up.

@transducer9257 3 жыл бұрын

Eric, we need mechanic like you everywhere. It would be great if you create a Network of reliable mechanics that you can send us to for repairs. You can make commission either from customer or from your exclusive network of mechanics or perhaps both. You need to think about retirement some day. So, start the network now and in a few short years you get there. You have fans everywhere that can help you out to expend the network.

@AntonioClaudioMichael 3 жыл бұрын

Good update Eric @EricTheCarGuy

@ericthecarguy 3 жыл бұрын

Thanks!

@cesarmunoz121 3 жыл бұрын

Gearwrench toolbox review🙌🏾🙌🏾

@haleysdad2004 3 жыл бұрын

OEM, if you can do it, is always the best way to go. Too bad it’s always so stinking expensive. Well done Eric!

@ericthecarguy 3 жыл бұрын

Or you find the OE manufacturer. I believe Exedy makes the clutches for Honda.

@workingguy6666 3 жыл бұрын

Very cool.

@nadronnocojr 3 жыл бұрын

Brothers love man a brothers love .

@thinman8621 3 жыл бұрын

If it was my brother that needed an Element clutch, I would at least expect him to hang out and hand me tools while I fixed his car. Eric is a nice guy.

@jstevenj1 10 ай бұрын

Wow, so That's how you got 1.7m subscribers? Bravo!...

@zze86 8 ай бұрын

Jist wanted to update this. I just bought a Element with a recently installed Luk clutch with the EXACT same problems. Replaced with an Exedy brand clutch and it's all good again. Again, same visual differences as this. It seems like the Luk is not correct from the factory. The Luk brand is normally a good aftermarket clutch brand but doesn't seem to be right for this application.

@dr.strangevelo6031 3 жыл бұрын

That was not what I expected!

@michaelstarmer3497 3 жыл бұрын

Man I wished I would have bought an orange one of these back in the day... Wife hates them but I thought they were a different kind of cool!

@ericthecarguy 3 жыл бұрын

I always wanted one in orange, but I'm loving my Cargo Khaki one.

@steezydeezy1889 3 жыл бұрын

crazy how you remember where every piece goes

@TreyCook21 3 жыл бұрын

You'll get that with these Dorman parts. :)

@HouseCallAutoRepair 3 жыл бұрын

Recording a clutch job is a huge PITA. Pure coincidence, I literally just recorded removing a 2000 Maxima clutch, last night. I (tried) to remove as little as possible, on the ground, in a driveway, passenger side up against a tree ..........ugh. Much more fun to watch someone else doing it!

@supersabrosinho 3 жыл бұрын

How long did it take you

@yafois988 3 жыл бұрын

the league of shadetree mechanics.

@HouseCallAutoRepair 3 жыл бұрын

@@supersabrosinho 2 days. First day was removal and OCD cleanup. Day two was reinstalling, torquing, refilling, and reassembly of intake and all the plastics, and the battery. Can be done in one day, but it's not worth rushing. Also, it's almost impossible to record and get all of the camera angles in such a short time... (and then there's the editing time...)

@removeableskull7446 3 жыл бұрын

Hey eric I’m a long time subscriber to your channel because of the knowledge you share so thank you for that. I have a issue with my own project truck and the question I have is can a 2003 clutch master cylinder from a base s10 work a clutch slave from a 1990 c1500 enough to allow the trans to go in gear. I have been try to bleed it for two days and I don’t have any leaks so I’m wondering if the master is able to move the slave

@SaycoPworrell 10 ай бұрын

Good video, probably same issue as mjne.

@FredTheLutinoCocatiel 3 жыл бұрын

It would be nice to have a new subframe from the junkyard that wasn't Rusty other than that well lot of work good job Eric

@ericthecarguy 3 жыл бұрын

As long as there aren't any holes, it's fine. They aren't that difficult to replace if need be. Thanks for the comment.

@NTromb 3 жыл бұрын

That’s awesome Eric unfortunately I am battling a different gremlin in my CRV which is a four-wheel-drive and a five speed auto tragic what happens is when I slow down to turn the corner sometimes when I go back on the gas it slips a bit it appears that when the transmission is hot turned off in park it is sitting just below the top of the crosshatches... I really hope that there’s nothing wrong with the transmission but nonetheless it is what it is by the way it has new fluids and a new filter

@ericthecarguy 3 жыл бұрын

www.ericthecarguy.com/solving-transmission-problems/

@htownblue11 3 жыл бұрын

Yikes Eric. That’s a fairly big job. Hope that thing runs for 200K with no clutch slip after that battle.

@ttproject5425 2 жыл бұрын

Fantastic video! Questions..... I need to replace the clutch in my 08 Element. Is it necessary to change out the rear main seal as well? I go on a lot of camping and climbing trips and in doing so I haul a few hundred pounds of gear over rutted out forest roads and snow. Needless to say I encounter moments where I have to stress the clutch more than most would. I have seen where folks have upgraded the clutch to the Acura RSX Type S clutch and flywheel. Would this be a worthwhile upgrade or would it be best to stick with Element OEM?

@AntonioClaudioMichael 3 жыл бұрын

Nice find on it being the clutch just not the springs in the friction disc interesting 🤔🤔 @EricTheCarGuy

@ericthecarguy 3 жыл бұрын

I think it was the wrong clutch from the start, or the pressure plate was bad. The only thing I changed was the clutch, pressure plate, and throwout bearing. Now it works. 🤷‍♂️

@AntonioClaudioMichael 3 жыл бұрын

@@ericthecarguy yeah very interesting problem wrong clutch makes sense each clutch works under different Pressure and spring tension

@dennisparent7660 3 жыл бұрын

What a tough job, lots of work.

@ericthecarguy 3 жыл бұрын

I didn't feel it was too bad, but I have a lift and a transmission jack. Those help a great deal. Thanks for the comment.

@pirihern9329 3 жыл бұрын

Mucho work

@sirdigalot1978 3 жыл бұрын

Everytime I have had bolt like that subframe one, I end up with a bolt head in the wrench and the rest still in the car, that horrible feeling of a bolt shearing off as you add pressure.

@DiabolicaTrix 3 жыл бұрын

nightmare fuel

@canuckfixit7722 3 жыл бұрын

My fears exactly. All four of these bolts on my '05 E needed over 180 ft lbs to remove and the first 6 full turns were each a series of cracks! Turns out that some moisture gets into the top four threads inside the chassis and rusts up.

@danhendershot8511 3 жыл бұрын

I hate that. One second it feels like it's coming out the next it's broken trash that takes up a whole lot of time.

@zx8401ztv 3 жыл бұрын

Smashing repair, it's back to honda spec now :-D Maybe the friction disk materal was thicker than normal, that could change the finger leveridge angle and require the bearing to push firther than normal.

@ericthecarguy 3 жыл бұрын

Actually, I think the wrong clutch was installed from the beginning. If there was an issue, I'd say it was the pressure plate and not the clutch because it simply wasn't releasing. I hope you have a great weekend.

@DashCamSerbia 3 жыл бұрын

This is why you always use the same manufactorer's clutch as the factory one was. It was designed to work with that, and even small differences can make it not work. Especially tru with the dual mass flywheels. If you install a different manufactorer's one, you can even break the transmission.

@garyanello3881 3 жыл бұрын

Just awesome!! I don't know how you do it Eric... So many pieces/parts removed including bolts, brackets and connections. How do you remember where everything goes and in what order????

@ericthecarguy 3 жыл бұрын

Like I did in this video, I often leave the fasteners in the same location as removal to help keep track. It cuts down on what I need to remember.

@Info-Tech- 2 жыл бұрын

Good

@mikekain773 2 жыл бұрын

I have a 2006 element that the clutch engages fine car stop's when clutch is in ,but sometimes but not all the time has trouble getting in first second gear, if you try to engage first it goes in third an can't get it in second gear. But then it'll work just fine got any ideas on what might be wrong with it thanks for any advice love your you tube videos been big help in the past

@timzauto 3 жыл бұрын

Yup,wrong clutch,good job,got to watch that on the Honda's.

@alienweed6396 2 жыл бұрын

Eric, when adjusting clutch pedal. Do you follow the specs. Or do you adjust it to how you feel it working as it should?

@JOEGGGJOE 3 жыл бұрын

When you don’t take your gloves off & go in the car or drive it, 😬. Another great video. 👍

@ryancurtis5988 Ай бұрын

Having the exact same symptoms replaced master and slave.bled the system and wheels won't stop spinning when the clutch is pressed in in gear

@millcitychris4303 9 ай бұрын

Just wondering do you know how much transmission oil it needs after you swap out the transmission from a 2006 Honda CRV. The mechanic says I need Seven Courts but I thought I needed three and a half quarts

@calholli 3 жыл бұрын

"Removing the ground here...... that I just installed" ---- lol. oohh the salt of doing things the second time. I hate it too.

@spunkmire2664 3 жыл бұрын

Dat breaker flex lol 9:16

@rope_bunney7927 Жыл бұрын

hey eric, my fathers having the same issue of the element not wanting to come out of gear/ still partially engaged with the clutch depressed. new master and slave, adjusted the pedal a couple times to ssee if i could get it to shift proper, bled it multiple times, and the throw out bearing is making some rotational noise. the engine i swapped into this shell was from a 2wd and we used the old clutch from that engine and swapped it into a 4wd tranny and setup. is the clutch different from 2wd to 4wd on the element?

@HotRod-wv4vm 3 жыл бұрын

Thanks for the video. Did you spray the undercarriage and other parts with rust oleum or POR while you had it in the air?

@ericthecarguy 3 жыл бұрын

Yes, I used Krown.

@scratchmyjunk9931 2 жыл бұрын

Hi, did you check the pressure plate for normal operation? If the pressure plate fingers are worn, you will see this symptom? Idiots holding the clutch in at the lights etc. wear out the strength in the fingers.

@jemtec1 3 жыл бұрын

Time to get a hockey stick my man!

@christopherhammond3664 10 ай бұрын

Is that black Teg in the background a factory ITR? Peeped the red VC, But can't tell what wheels it has or if it had 5 lug or factory front lip 😎

@ryulee458 3 жыл бұрын

Eric you should do a full transmission video of a Honda Element disassembly and assembly with new parts

@ericthecarguy 3 жыл бұрын

This is linked in the description. The only difference is the PTO on the back of the trans on the Element AWD applications. kzfaq.info/get/bejne/r7iCjbiY1Lnelmg.html

@giselleplantbasedvegan9174 2 жыл бұрын

Hi Eric, came to find a clutch video to help me diagnose the problem with my 2003 MT Element. I was driving the vehicle and when I put it in first or second gear, can’t remember, I thought I felt like a snap and s ping in the clutch pedal. I drove home and didn’t really notice any issues. The next day I started the vehicle but can not put it into gear. Before I take it to a mechanic K was hoping to get an idea of what it could be. Also not sure if I would need to take it to Honda or any mechanic would be sufficient to repair. Of course I’m hoping to have a better idea of the problem so I can have more sense when they talk with me, also perhaps be able to ask some questions. Thanks in advance for your help.

@Aleks_Mechanics 3 жыл бұрын

Notification squad!👍🏻

@adventureoflinkmk2 3 жыл бұрын

🙋‍♂️

@Aleks_Mechanics 3 жыл бұрын

@@adventureoflinkmk2 Awsome dude!👍🏻

@randomugliness1238 3 жыл бұрын

holy shit the amount of bending on that breaker bar when you were doing that subframe bolt.. scary

@canuckfixit7722 3 жыл бұрын

When inserting the input shaft through the clutch hub, how do you get the splines to line up? The clutch cant move because it's attached to the engine and you can't turn the input shaft by hand because it's concealed by the bellhousing. Is there a trick to this? Thanks.

@shawnmrfixitlee6478 3 жыл бұрын

I bet the guy that put that old clutch in never compared the parts he was installing ! And so the parts house sold him the wrong clutch . It worked for a while till it stopped releasing .. Great Job Eric !! ENJOYED, Happy Brother to ..

@thenexthobby 3 жыл бұрын

Interesting. I wouldn't have guessed something about the thickness or whatever could be that close to cause this issue. I still think the clutch on my Accord V6 has to come out since replacing the hydraulics didn't fix this similar issue for me.

@ericthecarguy 3 жыл бұрын

Make sure it's adjusted properly. Video in the description.

@WouterB76 3 жыл бұрын

The timelapse music was a joy to listen too :-) Good move to save the 'old' clutch from your element, i also always save parts that are good enough to reuse at some point. And i'm glad my new LUK clutch works as it should.

@ericthecarguy 3 жыл бұрын

I actually think this clutch was the wrong part for this application. I don't think it was an issue with the clutch itself.