Honda K Series Fail, What Went Wrong?

Рет қаралды 233,531

3 жыл бұрын

Not long ago I posted a short series of videos replacing the 2.4L K series engine in my, new to me, 2005 Honda Element. Many of you asked about what went wrong with the engine. In this video I tear the K series apart to find out why it didn’t have compression in cylinder #2. I also add useful info on timing chain replacement, as well as some other common issues to look out for on the Honda K series engine.
For those of you that want the engine, sorry, it's already been taken away. Thanks for your interest.
Thanks for watching!
#ETCGVideo #Engine #KSeries
Become a Premium Member of EricTheCarGuy.com: www.ericthecarguy.com/why-bec...
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
EricTheCarGuy FAQ Page: www.ericthecarguy.com/faq/
Check out my ETCG1 channel: kzfaq.info?su...
Tools
Cylinder Head Stands: www.summitracing.com/parts/cc...
Spring Compressor Extension for recessed valves: 07757-PJ1010A: www.hondacarpartsdirect.com/o...
Oil Filter Cutter: www.summitracing.com/parts/su...
Milwaukee 1/2”: milwaukeetool.com/Products/Po...
Brake Cleaner Sprayer: www.jbtoolsales.com/titan-too...
Brake Cleaner: www.amazon.com/gp/product/B00...
Related Videos
Honda Element Engine Replacement and Restoration (Part 1): • Honda Element Engine R...
Honda Element Engine Replacement and Restoration (Part 2): • Honda Element Engine R...
I Just Bought 2 Honda Elements: • I Just Bought 2 Honda ...
Fixing Up My Brothers Rusty Element: • Fixing Up My Brothers ...
Mechanics Special 2000 Honda Civic: • Mechanic Special 2000 ...
1999 Honda Civic Engine Replacement: • 1999 Honda Civic Engin...
What is VTEC and How it Works: • What is VTEC and How D...
iVTEC and How it Works: • iVTEC How it Works -Er...
How To Remove and Replace Valves in a Cylinder Head: • How To Remove and Repl...
How To Remove Valve Springs In the Car: • How To Remove Valve Sp...
Honda K Series Valve Adjustment: • Honda K Series Valve A...
K Swaps Good or Bad?: • K Swaps Good or Bad?
Element Video Playlist: • I Just Bought 2 Honda ...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 723

@is300glenn 2 жыл бұрын

The more I watch this guy, the more I like what he presents. He's unusually smart, articulate, and experienced. The unfortunate part for most of us, however, is there's not many "Eric's" out there for us to work with.

@BiggySeth 3 жыл бұрын

Tip for anyone wanting to take off and REUSE the head of your Kseries engine. (Like a head gasket replacement) DO NOT remove the cam bolt like Eric did by just unbolting them one by one, it WILL warp the assembly. You have to take off the Cam bracket bolts and Head bolt in a specific and slow quarter turn cross pattern in order to prevent warping and having to take everything to a machine shop.

@kirkandkaylaglaser2922 Жыл бұрын

You’re right. Start in middle and work toward outside evenly on each side of middle

@bryanlamb6351 3 жыл бұрын

Hahaha!! “Without these, the VTEC can’t kick in, yo!!” Thanks Eric, great video, and as always - thanks for sharing with us!!

@spaceghostpurpz4744 3 жыл бұрын

Had me dying lmao 😂

@rand723 Жыл бұрын

Just bought a 2003 CRV with same K24A1 engine that supposedly had a bad #2 cylinder. I compression tested it myself and all 4 cylinders were above 180psi. Turns out all it needed was a new ignition coil. I went from thinking I needed to rebuild an engine to just needing a $40 ignition coil. Winning.

@FrankC76 3 жыл бұрын

Watching you take this engine apart was like therapy for me.

@kicknsystm 3 жыл бұрын

My health has declined over the years & the last couple years I have bought a few tools every month adding to my 30+ year collection. Good & appropriate tools allow me to still stay active ( to a point ). Every time you grab certain tools I can't help but see the investment. I've been around for more than a day lol but I learn something new in almost every one of your videos. Thanks for that.

@snazy7777 3 жыл бұрын

Do you find it like a addiction? I always keep buying tools even for projects that are months down the line, Had a moment of reflection a couple days ago and wondered to myself should I try wind it back a little. I love my tools !!

@kicknsystm 3 жыл бұрын

@@snazy7777 Absolutely! I'm all the time seeing tools & supplies in videos & putting the on my must get list. It's never ending & I like it. I often even use my tools to make more tools lol.

@Tuttomenui 3 жыл бұрын

That spring thing I learned from another youtuber is a bypass spring. If the filter element gets clogged the oil pressure can push it in and bypass. I guess the idea is that its better to let dirty oil through rather than starve the engine of oil.

@ArchimedeanEye 3 жыл бұрын

valve seat recession and lack of cam follower clearance leading to low compression and other bad things.. very well explained Eric.

@benh4222 2 жыл бұрын

and like he said a valve adjustment was likely done (incorrectly).

@-DC- 3 жыл бұрын

K Series is one of the best internal combustion engines ever manufactured.

@tiberiusclaudiusnerogermanicis 3 жыл бұрын

Bit like the 1.9tdi pd

@jaybee6477 3 жыл бұрын

The best naturally aspirated that will ever exist possibly

@hunting447 3 жыл бұрын

Volkswagen is superior

@busterscrugs 3 жыл бұрын

@@tiberiusclaudiusnerogermanicis ew, pumpe duse. ALH ftw

@jeffthejinjer 3 жыл бұрын

Yeah clearly not 🙄 Did you watch the same video I just did? Manual valve adjustments go way back to early 20th century! You'd think they'd upgrade by now 😆

@toddblais3060 3 жыл бұрын

The stamped steel spring is what opens the bypass valve when the filter clogs and can’t move oil through the element. It compresses and lets oil pass straight through in case of clogging.

@brandonupchurch7628 3 жыл бұрын

On this filter, it only holds the filter element in place and has a hole in it so oil can get to the bypass valve, the bypass valve is built into the end cap of the filter media on this filter. The stamp spring has nothing to do with the actuation of the bypass valve, the bypass valve has it's own little coil spring that's designed to actuate the valve when the delta between the inlet side of the filter is too high either when the filter plugs or during a cold start when the oil is very thick and causes a very high pressure drop when it's forced through the media.

@heisenberg9739 2 жыл бұрын

@@brandonupchurch7628 ur talking arse

@96kylar 3 жыл бұрын

Had a TSX, (07) with a manual 6 speed, and the K24, ... i adored that thing. Sold it with a smidge under 300k miles. Dude put a new clutch in it and drives it still today. I still miss that thing. Great vid boss,...

@johnsmothermon6856 3 жыл бұрын

Got an 04 TSX last year with the MT6. Got it real cheap off a kid that thought he'd spun a rod bearing. I'd planned on swapping the engine with an 06 K24A2 I had already built and was waiting to go into something. Turned out it was the a.c. compressor. Kid was a knucklehead. I kept the motor in it. 276,000 miles and runs like a champ!!!! Fun fact about the tsx mt6. You can use accord shift cables on them. Just swap the mtwo cables around in the frame mounting bracket that comes with them.

@Michael-fw5ef 3 жыл бұрын

I love videos like this where I see how the cams and valves and spark plugs and cylinders etc, all come together in an engine. It's much better than looking at pictures in a book.

@MrWilliam.Stewart 3 жыл бұрын

Eric, you're really in your element here. I'll show myself out.

@jameswyatt1304 3 жыл бұрын

The usual thorough, well-explained videos I love on this channel, Eric. I learn bits in every one, so thank you once again.

@charlesk9471 3 жыл бұрын

You are such a good teacher for auto problems. Thank you.

@Mishakol1290 3 жыл бұрын

He is but i don't buy that a valve caused him to lose all compression it might of been his piston rings. He didn't test the other cylinders for leakage to see if it was normal for it to leak. Sometimes it IS normal and i had a machinist i knew who said it was fine for the valves to leak in a test because the amount of igniton cycles and speed causes them to seal. Its not accurate to do a test like that is what im saying.

@cristian6766 3 жыл бұрын

Greetings Eric! Cristian here. 😁 I love you Eric! Please never leave us! Love the content!

@fallbrookdave 3 жыл бұрын

Really blessed to have Eric putting out all these videos on Honda Elements. Just happens to be my car.

@jp2246 3 жыл бұрын

Cool that you are going to give the engine away to a viewer, hope the person who gets it does something with it!

@TheShangralaaaa17 2 жыл бұрын

yea like toss it in the scrap pile where it belongs lol

@supersabrosinho 3 жыл бұрын

Excellent teardown! thanks Eric for sharing with the rest of us!

@dominicfong6341 3 жыл бұрын

You are such a wonderful father dear EricTheCarGuy. Your kids are very fortunate to have ya, sir!

@ketoninja 3 жыл бұрын

A post-mortem on my favorite engine ever, the Honda K24. Thanks Eric! I've also never seen a better explanation (show and tell) of why Honda valves require periodic adjustment.

@adobo6905 3 жыл бұрын

Honda is not recommending it. Eric recommending it. Honda wins the argument.

@BigEightiesNewWave 3 жыл бұрын

@@adobo6905 engine burned up from NOT adjusting , Eric wins. Bad Honda design.

@adobo6905 3 жыл бұрын

@@BigEightiesNewWave your logic is unmistakably accurate.

@A_guy840 3 жыл бұрын

@@adobo6905 Honda actually does recommend it too...

@adobo6905 3 жыл бұрын

@@A_guy840 I took my 2006 Odessey to a Honda dealer with 185000km and K24 engine for noisy lifters and I was told adjustment is not a part of scheduled preventive maintenance or nedded.

@olbtube 3 жыл бұрын

I really like the knowledge and work you put into this and share with us! I must confess I switched to electric a year ago, and for a daily driver, not having to think about all these potential issues issues is a bliss. I still would like to have a (proper) gas powered car as a hobby, and that's why I will keep watching your videos.

@ericthecarguy 3 жыл бұрын

Electric is cool, but also has its drawbacks. I believe electric is just another version of the same thing we're dealing with with ICE. If we really want to address the environment, public transport is the way. Thanks for the comment.

@joemamma9642 3 жыл бұрын

i literally just adjusted my valves on my j30 at 184k. all intake valves were loose and chattering, exhausts were nice and tight. back to spec and it sounds like new. thanks eric!

@gregholloway2656 3 жыл бұрын

Great video, Eric. Glad you’re not going to just junk that engine. Even with just a head rebuild, I’d think it’d continue to run for quite a while.

@ryanpearson6765 3 жыл бұрын

Funny that I watch this video today and I went and bought a K24A2 this past Tuesday for $600 (I’m building a AWD Del Sol). Plus the fact I live in Georgia and it is a 10hr trip one way. Thanks for the great talking points Eric. I turn your channel on for background noise while I’m working on my corvette killers.

@AlexM-tx2vr 3 жыл бұрын

Thanks Eric for another great vdeo. I don't know why, but an engine autopsy is always super interesting to me. Also, I always learn something new.

@Porsche996TT 2 жыл бұрын

I have a cheap Renault car and I wanted to watch this just for knowledge and experience, and came out with a good observation that I should take care of in my engine which is valve adjustment. I know my engine repair manual recommends it but I was delaying it for not knowing what might happen. Thanks Eric.

@MrTimstaaa 3 жыл бұрын

Hey Eric. Thank's for another great video. Love the Honda video's. I've got a Honda accord Euro with the K24a3 engine which i purchased brand new in 2005. I had to replace the motor about 5 years ago at about 198,000 kms (engine was faulty from factory. So these video's help alot.

@jamesjamias6796 3 жыл бұрын

I learn so much from watching your videos. Periodic Valve adjustment part of this video was very helpful.

@papapetad Жыл бұрын

Cool of you to offer the engine. I see so many channels throwing stuff away as if it were just a rotten potato or something. This stuff took a LOT of resources to be put together. It's precious regardless of what price sticker is on it...and this engine in particular (k series) is one of the best engineered 4 cylinder motors ever, if not THE best mass produced one...so yeah, kudos for giving it a chance to be mended and live on while making someone's day.

@j.maxwaddell2557 3 жыл бұрын

Fun to watch you take this engine apart with great ease and knowledge. Good video

@MrCuckoobox 3 жыл бұрын

Thanks for Sharing......I always love to see what makes them tick, how they are put together, what happened to them and what needs to be done to repair it.

@WhiskeyDale 3 жыл бұрын

great to see what the issue was on this engine. I do believe it is worthy of a nice economical rebuild and get it back on the road. thanks Eric

@restitutocatipay3972 2 жыл бұрын

Kidding aside, i really learned a lot from you sir erick. My honda crv shock mounting replacement is acheduled next week and my confidence that ie can doitmyself is triggrred by your video tutorial and hopefully i can!, thank you sir!

@craigbartels2021 3 жыл бұрын

I currently have a 2001 crv (b20z) with a dead cylinder as well...this video gives me some confidence and some ideas what to look for after pulling the head.. love the solvent in the upper chamber idea.. thanks so much eric, you have gotten me through six years of keeping the old dog on the road -craig

@craigiefconcert6493 3 жыл бұрын

Oh no.... I just noticed your name is Craig. I’ve got a B20b engine CRV. Engine is good though. Needs a timing belt and valve adjustment. I hope I get the valve lash right.

@craigbartels2021 3 жыл бұрын

@@craigiefconcert6493 i think youll be fine... plenty of information out there.Just take your time and remember its better to leave them a little bit loose than tight. Personally I like to use a box wrench and scewdriver vs. the adjustment tool, cause you can see the position of the slot on the set screw as you tighten down the jam nut...good luck!

@randomrandy1166 3 жыл бұрын

i replaced an exhaust cam when i got my e at 320 000km(worn out lobe) did a valve set after watching your video, i checked my plugs a week later and found one running hot, watched your video again.. did the valve set again, and found i had one exhaust valve a little to snug, i just hit 400 000km and going strong on the original engine. very easy to to over do it lol Thanks for your help and all your info, fun videos to watch

@mpaulk2023 3 жыл бұрын

Good lord, if I didn’t live in OREGON, I would already be at the shop waiting for you!!!! 🤣🤣🤣

@garybaker1634 3 жыл бұрын

After me!!!

@garybaker1634 3 жыл бұрын

Lol

@Chrislk1986 3 жыл бұрын

Hello fellow PNW'er! And same, I'd love to tinker with a K24 but I've got an EP3 with K20a2(?) @ 240k miles that I've been waiting for to die, but it just won't! Heck, even my previous Civic, 98 Hx wouldn't die (D16y8?). My sister ran it low (2qt+) on a 2000mile trip up from Cali (stripped drain bolt), and it burned horribly ever since. Went 2 years/32k miles without changing the oil, just topped it off every week. Figured it wouldn't hurt since it needed to be rebuilt anyway, car was a champ.

@johnsmothermon6856 3 жыл бұрын

@@Chrislk1986 I'd love to have that K20a2 head if you decide to get rid of it.

@Chrislk1986 3 жыл бұрын

@@johnsmothermon6856 My bad. It's actually an K20A3. I'd love an A2 as well.

@semperfi1000 3 жыл бұрын

I wasn't planning on watching the whole video but Eric did it in such an entertaining way I really enjoyed it.

@irvinhoffman1710 3 жыл бұрын

Me too

@vdog4799 3 жыл бұрын

Very nice piece of reasoning Eric. Thank you for another great video. Love the part about the valves

@starbai410 3 жыл бұрын

K Series, Best engine ever made by Honda imo.

@TheRebuilt1 3 жыл бұрын

maybe most powerful and advanced but the D series was their best most reliable design imo.

@etchosts8162 3 жыл бұрын

They’re bullet proof. Valve cover gaskets leak but not a big deal.

@wasabitoburrion4409 3 жыл бұрын

I agree ☝️

@ifgezroxy 3 жыл бұрын

I love B16 and B18 engines, have owned a car with them. But have to agree. They are insanely good value for money, the can be a huge powerhouses or reliable daily driven cars. Not many engines can claim to be so versatile.

@youngb1ood 3 жыл бұрын

@@TheRebuilt1 b series over d series. D series will eventually have head gasket issues. But timing belts are a cinch to change.

@chrisnorton2837 3 жыл бұрын

That was cool, learning about this engine. Thanks Eric. ☺👍

@arvindsingh-qp7rg 3 жыл бұрын

Great video as always , it takes a right touch to get those valves at the right lash . I have a 2000 331000 miles accord with j30al and I'm learning that

@digitalrailroader 3 жыл бұрын

That bottom end looks to still be serviceable; a good honing and fresh rings would do wonders for it! As for the cylinder head, it would make for a good core for a new head. (Whoever owned that element before you, was very likely RELIGIOUS with oil changes which is probably why it’s so clean inside)

@SignalStopper 3 жыл бұрын

yeah and whoever did the valve adjustment (probably some brand new tech at honda) fucked it up and ruined the exhaust valves. that is why doing the work yourself and taking your time at home is better than letting some high school flunkie do it at the honda dealership. lot of the dealerships recruit people from stickers that they put on the oil filter.

@hisheeelijah1482 2 жыл бұрын

@@SignalStopper perfectly daid my friend. You put my thoughts into words perfectly

@pliedtka 2 жыл бұрын

The 2.4L and V6 engines 'tighten' valves clearance with usage, and adjustment is a must on them. But most likely the piston rings are also baked and with the increased temperature caused by burning oil the valves suffered as well - I did a few of these.

@RoyalLineageLLC Жыл бұрын

@@pliedtka Do your maintenance you won’t have an issue.

@probochronicles3991 3 жыл бұрын

I'm happy to see that the guide blades for the timing chain are mostly metal, unlike the GM Ecotech motor I had in my last car, an 04 Cavalier. I did a complete timing chain replacement in that car because the guide broke. Then I had to take the oil pan off to make sure no plastic parts landed in the oil....

@dc5duben96 2 жыл бұрын

lots of great info for us kseries guys, thanks eric!

@bgee461 3 жыл бұрын

Excellent explanation about valve lash adjustment and why it is necessary

@vijayantgovender2045 3 жыл бұрын

Thank you Eric I always love watching your wonderful videos and the educational information I am from South Africa

@ericthecarguy 3 жыл бұрын

Hello South Africa!

@HaythamBuKhadra 3 жыл бұрын

I learned today. Thank you Eric 👍🏼

@ganeshnarayan5505 3 жыл бұрын

Great video Eric. Thanks for sharing

@EvilGeniusGaming84 3 жыл бұрын

Awesome video as always Eric 🤙😉

@MrAtomBee 4 ай бұрын

Just changed the plugs on my crv 2005 and saw that plug 3 was pretty carbonized , car has 210k and never had a valve adjustment so Im going to surmise that might be exactly what a no valve adjustment issue may look like. Love your channel!!

@marciaz31 2 жыл бұрын

You have a great speaking voice .... Thank you for the education on this engine ...

@ricklakes9405 3 жыл бұрын

A very good and interesting video. Thank You Eric

@IBenZik 3 жыл бұрын

This rebuild would be great to watch. Pt. 1, Pt. 2 etc. Don't need it all at once but I would love to watch rebuild. Thanks for your info.

@darthvirgin7157 3 жыл бұрын

strange for a honda engine, i’ve had to do a valve adjustment on this same engine (K24A1, for a CR-V) at only ~60k miles. i essentially got an error code related to idling. and when the engine was cold, i would have problems with the engine dying when at a stop light. i was proud of myself when i managed to fixed the problem myself.

@ka-tengboyz5473 3 жыл бұрын

“Without these the vtec can’t kick in Yo.”😂☠️ Awesome video. Learned so much from you over the years

@TheShangralaaaa17 2 жыл бұрын

vtec doesnt kick in anyways on an A1 lol

@frankrivera4479 2 жыл бұрын

Fantastic information sir you are the man when it comes to knowing honda k24 engine great!!!!!!!

@TheOldMansPicks 4 ай бұрын

Excellent breakdown. Thanks.

@kevinlai9720 Жыл бұрын

Great teardown video with explanation! That's why I love watching your videos. However I do believe you can still use the block as a performance engine, as long as you bore it out with oversized pistons and do a built bottom end. The head would probably need to be sourced from like an RSX-S for better flow.

@neilhossack8106 3 жыл бұрын

Exact same thing on my Element - cylinder #2 burnt exhaust valve. Previous owner never adjusted valves. So, a new valve, relapped all the others, new head gasket and head bolts and so far 40k kms later it runs great. Timing chain next...should have done it the first time..

@1keykneedeep 2 жыл бұрын

Great video Eric. Great upclose camera work. Goos stuff brother

@Acme-Logistics Жыл бұрын

Fantastic video Eric, once again... The Honda Master,King . 🔥💯💫

@doctorjohn-burgtekie 3 жыл бұрын

Another awesome informative video.

@lonwillis783 3 жыл бұрын

Eric my 2003 honda element went 249000 miles. No problem I though these engines were bulletproof. And no I wasn't always light on the pedal. Yes I had the valves adjusted every 70 to 100 k. 😊👍

@audioworkshop1 Жыл бұрын

I've had 4 elements, all still running like new and I have never seen or heard of a K series engine going bad under 200k [unless regular oil changes and maintenance were neglected] but even then it's rare... I would have just changed the valve out and run it for the next 100k... the K series are almost indestructible as we all know, that said I really enjoyed this series on the engine swap and learned a lot about my trusty ride... Cheers!

@brmelectric 3 жыл бұрын

What a great, informative and enjoyable video.

@Uaekabayanautomaster 3 жыл бұрын

My idol Eric the car guy.. He knows what he explain.. Smart and cool guy.

@ballsdeep420x 3 жыл бұрын

Great video. One more option to find the leaking valve would.have been to perform a smoke test.

@JimNichols 3 жыл бұрын

I enjoyed the video sir, nice topic, nice clear concise way of thinking and explanation. Very good. I retired, sold all my stuff and moved to Thailand and I do miss turning wrenches. I been doing it somewhere for 52 years (lol first Briggs rebuild when I was 8) so I have seen a thing or two and I know a thing or two. No argument the engine needs loving, but I didn't see the cause of 0 compression on #2 I see falling compression from the condition of the valve and seat. But hey mark one eyeballs are better than video for that call..... great vid, great editing and best of all no music... Got a subscriber out of this one! Thanks.

@richardploeser4267 2 жыл бұрын

GOOD Diagnosis! Great job!

@frankrivera4479 2 жыл бұрын

Great video thank you for the information.

@davidroyston6550 3 жыл бұрын

Very good of you to give that motor to someone who needs it. Kudos.

@blairguinea6811 3 жыл бұрын

Hey Eric.........as long as been on you tube, your vids are great, this one is exception, thank you Sir...............and no I cannot get your engine in NZ but thanks for the offer

@oldtimefarmboy617 3 жыл бұрын

When it comes to bolts and screws, when I worked as a mechanic decades ago, I built a container with partitioned to create pockets (with labels) to put bolts and stuff from different parts of the engine or transmission I was working on into as I took them out. That prevented someone or something from accidentally hitting the bolt groups and mixing them up. That enabled me or anyone who took over for me to know what was what and where it went. Putting it on the back of the bench lessened the possibility of the container accidentally being knocked off as well. When it comes to work on the interior of a vehicle, I do the same thing but with one of those compartmentalized containers they sell for fishing lures, weights, etcetera. Taking something out of the dash or removing a seat, just put the screws and bolts for each different part into its own compartment then shut and snap the lid so that everything stays secure in its own compartment. Makes reassembly much easier when different dash screws are similar but still different enough they do no work in each others place as well.

@JoeBakerOutsideTheBox 3 жыл бұрын

Element related video...awesome!

@prometheus160 3 жыл бұрын

as always great video And most important he has some nice tegs in the back there. thanks Eric

@billtanguay8905 3 жыл бұрын

Eric! I'm sending this video to both of my kids in the hope they watch the machine that is under their hood and have a better appreciation of what keeps working perfectly for them day after day, season after season, year after year - and why their dad is such a maniac about oil changes and filters! 2004 CRV and 2007 Element!

@ericthecarguy 3 жыл бұрын

You might throw this one in as well: kzfaq.info/get/bejne/qceAerteltenZIE.html Thanks for the comment.

@markanderson769 2 жыл бұрын

Great video and information

@ecschindelbeck 3 жыл бұрын

Very informative. Although it is about an Element engine, this video teaches me a lot about the K24 in my own 2015 Accord Sport. Thanks ETCG!

@josephagibinik6995 3 жыл бұрын

OK thanks Eric learning new things bout k 24 if I can come get it would be awsome

@waiting4aliens 3 жыл бұрын

Good video. Good decision on the K engine as well. Parts and machine work will be very close on almost any Honda engine. You only have so much time so spend it well on a more rewarding engine.

@stevepeters3032 3 жыл бұрын

Very interesting. Learned a lot.

@1978Rolla 2 жыл бұрын

Invaluable and selfless information sharing. Thanks for all the sweat equity you put into your videos, both turning wrenches and editing. I am currently rebuilding a Toyota 3tc and I intend to replace the valve guides and seals since I am already there. Is it a MUST that the aluminum cylinder head be heated before replacing the guides? The manual calls for it but I wanted to hear from an experienced perspective. Thanks in advance.

@roy18m 3 жыл бұрын

I love yours videos I have a acura tsx with 270000 miles still working like champ

@jamesterrill1938 3 жыл бұрын

A great video Thanks for the lesson..

@jillclark8190 Жыл бұрын

Another great Vid Eric. IMHO it is Honda that destroys these engines. The service 'advisor' will echo what it says in the owners manual "check/adjust valves ONLY if noisy" TIGHT valves aren't gonna get noisy! Many first gen crvs died prematurely because of receding and burned exhaust valves and as I begin the search for a replacement for our 410 Megametre 04 accord that suddenly lost compression in one cylinder I see several others right in my area for sale with "no compression in one cylinder". My guru, longtime head Honda mechanic at the local stealership, discouraged me from having him check/adjust. Wish I hadn't listened! Due to the ridiculous cost of a replacement right now this one may get a shadetree (no shade at 20 below) partial valve job!

@izmirrahman 2 жыл бұрын

Thanks so much for doing this …. I have this exact engine

@forrestcarroll9350 3 жыл бұрын

If only you weren't so far, I'd pick this up to rebuild to replace the K24 in my CRV that's having similar oil consumption issues. Hopefully someone does something more interesting with it than what I would have!

@yassersaad757 3 жыл бұрын

I wish I could take it. Amazing work.

@shootr04 3 жыл бұрын

It’s a shame that such a clean engine had issues. Also the burning oil is a bummer. My 04 Accord 2.4 with 227k ran smooth as butter but drank oil like it was going out of style. My 05 I currently have with 127k, however, doesn’t burn a drop. It’s interesting how some just seem to develop those issues while others do not.