Honda Elite 80 - Carburetor Disassembly / Cleaning / Assembly

Honda Elite 80 - Carburetor Disassembly / Cleaning / Assembly | Mitch's Scooter Stuff

Рет қаралды 26,048

3 жыл бұрын

In this video I am going to show you how to remove the carburetor on Honda Elite 80cc scooter to to take apart to clean and replace parts then put everything back together to get scooter running again!
*** Tools I used in this video:
Phillips #2 screwdriver - amzn.to/2fgdZDL
Flathead screwdriver - amzn.to/2jN7lpE
10mm wrench - amzn.to/2hqqYDW
Carburetor spray cleaner - amzn.to/2Xy8Fiy
Magnet bowl (3 sets)- amzn.to/31EnP7O
Goggles - amzn.to/3dEj6FA
Nitrile gloves - amzn.to/3i6Ad6B
Nose pliers - amzn.to/2yetDDj
Sock / rag
Empty bottle
warm water + soap in bowl
Old toothbrush
Want more free Scooter Tip / Tutorial videos - Help support this channel!
Paypal donation: bit.ly/PayPalMitchsScooterStuff
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsScooterStuffSHOP
** Help translate my videos to your language HERE **
bit.ly/ADDYOURLANGUAGE
Follow Mitch's Scooter Stuff:
Website - bit.ly/Scooteronly
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other KZfaq channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#HondaElitecarburetor #HondaElite80 #MitchsScooterStuff
Like the music? Check out this great library for KZfaq videos here:
bit.ly/MICTUNES (try it for FREE!)
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Honda Elite 80 - Carburetor Disassembly / Cleaning / Assembly | Mitch's Scooter Stuff
• Honda Elite 80 - Carbu...
Mitch's Scooter Stuff
/ mitchsscooterstuff

Пікірлер: 60

@MitchsScooterStuff 3 жыл бұрын

*** Tools I used in this video: Phillips #2 screwdriver - amzn.to/2fgdZDL Flathead screwdriver - amzn.to/2jN7lpE 10mm wrench - amzn.to/2hqqYDW Carburetor spray cleaner - amzn.to/2Xy8Fiy Magnet bowl (3 sets)- amzn.to/31EnP7O Goggles - amzn.to/3dEj6FA Nitrile gloves - amzn.to/3i6Ad6B Nose pliers - amzn.to/2yetDDj Sock / rag Empty bottle warm water + soap in bowl Old toothbrush

@alieid6453 3 жыл бұрын

Hey mitch, i have a question about the piaggio fly older model 50cc. My forefork leaked oil and now my scooter bumps like a trampoline. I want to fix my forefork but the problem is that i have no idea how much oil i have to put in the forefork. Do you know how much? I would really appreciate an answer. Thanks

@27sport86 3 жыл бұрын

Mitch, consider getting a #2 phillips JIS screwdriver for your scooters. Amazon sells them.

@JohanGavieres 3 жыл бұрын

Really wanted to see how to adjust the idle to stock setting. 😭

@sideshow101101 3 жыл бұрын

I will probably never own a bike with a carb, but its relaxing to watch Mitch's videos and learn these things in an everyday manner. Thank you Mitch.

@amatureskater15 2 жыл бұрын

You should, it teaches you a lot. plus all the cheap little bikes have carbs ;)

@roybibby2351 3 жыл бұрын

I’ve loved watching a lot I’ve your videos lately. I’m a new subscriber and as just bought a little Honda PCX scooter and seen one of your videos pop up on my timeline and been hooked since. Keep up the good work 😁🛵

@superdukedad Жыл бұрын

Just picked up a 2002 Elite 80 for dirt cheap, so I'll be scouring your videos here for input! Thanks for all the content and resources

@MitchsScooterStuff Жыл бұрын

Right on! 😄👍🏼👍🏼

@nithinraj7351 3 жыл бұрын

Good job mitchy.....Man... it require lots of patience to clean and restore that stuff.....Good work brother....

@MemoBar100 3 жыл бұрын

Excellent!!! Thank you for sharing.

@anthonyserrano672 3 жыл бұрын

Another job well done😎👍🏼

@THRITCHIE76 Жыл бұрын

I kept my '86 Honda Elite 80 and have taken the carburetor apart. I have a plastic (nylon?) part that goes between the carburetor and the manifold. I can't seem to find that part anywhere in the manual but it does have gaskets inside it.

@barneykennett9282 3 жыл бұрын

Nice one Mitch...👍.

@rezjrprod 2 жыл бұрын

Not sure how you access the rear nut without taking the wheel off, mud guard and exhaust..I think you missed showing some steps in that area..I can't access it

@burstcasino 3 жыл бұрын

Hey Mitch really enjoying your Ch80 videos. It's really helping with the Ch80 that someone abandoned on my property. It's in about the same shape as your $99 Ch80. Still won't start and I've been checking things bit by bit. I need an exhaust pipe and also some carb parts. Where did you get that carb rebuild kit. The ole skip across the garage has swallowed up my needle seat. The part at 7:37 of this video. I have not stopped looking for that part but It might be lost and I'll need to replace it. I'm having problems finding a rebuild kit that has all the carb parts. I've learned a lot from your restoration video and keep going back as I dig into the Ch80. Also need a center battery box cover and knob. Thanks

@stevefletcher2334 2 жыл бұрын

love the videos!...but to be accurate, you should use a JIS screwdriver, not a Philips, for those carb screws. You can identify a JIS screw by the little dimple on the head. A JIS driver works fine with Philips screws, a Philips screwdriver has a greater chance of stripping out a JIS screw head. The old Japanese bikes had JIS fasteners all over.

@simongray9306 3 ай бұрын

Great video

@eduardodearkos476 2 жыл бұрын

Thanks,good job!!!

@cwelliver1985 3 жыл бұрын

Is your air mixture screw all the way to the left or right?

@TadhgConnick-Stokeld Ай бұрын

Make sure to crimp or remove and plug the gas line before draining the carb if you have good gas in the tank.

@MitchsScooterStuff Ай бұрын

👍🏼

@crazyadventures9720 3 жыл бұрын

What's the top speed you have done on the 80

@robertpal4294 Жыл бұрын

What do you set the air fuel mixture screw too tho

@briancorbeille2390 2 жыл бұрын

At 10:55, does that spring have to sit right on top of the plastic piece?

@albertcampos959 2 жыл бұрын

Question, the main jet has a an additional piece/sleeve inside, I saw you pull that out but I didn't see the orientation was it goes back in. I took mine apart to clean it and didn't pay attention i lined up the wide part touching the main jet because they appear to mate that way, and so I threw it all back together and the bike runs mostly ok, but seems rich (I just bought it so dont know how it ran previously) anyway once I left the airbox cover off it's running better. Any chance that little sleeve might have gone in backwards and is the culprit? Great vid, thx!

@newenglandpats59 3 жыл бұрын

I have a Helix. Have you worked on one? I like your videos!!

@budgetbuilt8838 Жыл бұрын

You pulled that metal thingy out of the main jet but never put it back in? Having trouble with this exactly and cant get the main jet to thread back in

@McGuinness89 2 ай бұрын

Hey do you have link to rebuild kit?

@RamonaSegovia-mj7wb 13 күн бұрын

My Honda elite ch 80 doesn't have a throttle how do I install one is there a video for me

@KedbI4 3 жыл бұрын

14:15 worst air filter) does it filter anything?)

@johnmcgrath3296 3 жыл бұрын

Awesome video! I am struggling to get my 98 ch80 going after sitting all winter. Bought a new battery and put fresh fuel in. It turns over but will not fire. Any help would be great! Thinking it’s a bad spark plug?

@Alan-tn6de 3 жыл бұрын

51mph!

@johnmartin7985 4 ай бұрын

Mitch I'm having trouble with my ch80. It's bogging down after 1/4 throttle. I changed the carb, petcock, spark plug, oil and still having same issue. can you give me any advice

@TURKEYMAN60185 3 ай бұрын

Did you figure it out ????

@1bdtahoe 3 жыл бұрын

Any ideas on how to get a higher top speed out of one of these?

@Millermacs Ай бұрын

Buy a bigger bike

@lukeb1173 3 жыл бұрын

Thank you, Mitch! Your videos have been a godsend for working on my Elite 80. My scooter is having an issue, and I'm hoping someone can provide some pointers - right now it bogs down and the engine stops running once I get above 25 mph. To give some background, I took the scooter to the Alvord Desert in Oregon, which is a large flat playa, and after two whole days of riding it around out there, it quit starting. Now it starts no problem, but it bogs down. The engine and all components were completely caked in dirt/dust, so I have cleaned that the best I could and also done the following: Changed oil Changed spark plug Changed air filter (which was caked in dust/oil) None of this fixed it, and now I've cleaned the carburetor, but it looked fine, so I have a feeling this won't fix it. Does anyone have other ideas? I'm wondering if some tube somewhere on the scooter is clogged with dirt. Another thing I see is that the oil separator is caked in oil, and some oil made its way from there to the air filter. Could this have something to do with it?

@robertknowles2699 11 ай бұрын

I wouldn’t start CH-80 in extreme dust or sandstorm. Further, Mitch’s patient, expert disassembly, without Elite Manual ? , might lead to intake manifold dust after these Carburettor steps are followed.

@foadrightnow5725 3 жыл бұрын

Why no footage of it running after the rebuild?

@90Notchlx 2 жыл бұрын

What rebuild kit did you use. I am looking at some but they don't have everything.

@TowfiqAli-li3lk Жыл бұрын

did you end up finding a rebuild kit. cant find any solid ones.

@pinkylieder5878 2 жыл бұрын

do a valve lash video for ch80

@fighter-yo3di Жыл бұрын

Where to get a new gasket?

@eddievargas3882 3 жыл бұрын

What do you think about a Bintelli Breeze 49cc?

@eddievargas3882 3 жыл бұрын

Also what size engine should I upgrade to that is an easy DIY?

@user-xd6yp9xr9z 5 ай бұрын

Will it mess it up to run it without a air box I have a filter on it but when it gets wet it don't work but it runs great with out it

@MitchsScooterStuff 5 ай бұрын

Yes, always run with filter, run with dry filter. Does it get wet after running?

@user-kq8gx3wk1h 3 жыл бұрын

👍👍👍👍👍👍👍

@alessandropezzella4505 3 жыл бұрын

Wow

@fivethreeone 3 жыл бұрын

all the screws on my carb are too tight :(

@joeb6137 2 жыл бұрын

Have you worked on a Honda aero 80cc?

@MitchsScooterStuff 2 жыл бұрын

Yes years ago before KZfaq exist... I would love to work on one again if I see one available

@joeb6137 2 жыл бұрын

@@MitchsScooterStuff I am getting into one right now, if you were close I would pay a scooter guru to check it out. She ran good and then the kick start won't start it (electric start is out) but it kinda groans, especially when I twist on the throttle, like (blub blub blub) so the fly wheel is engaging I think When I go to kick it the light turns on. So I think it's a fuel issue. I'm sorry you don't have to answer my questions, I just know you are the guy. But could be old gas. I tried putting wd40 through the intake but it still won't fire. Could be spark

@GoogleGoogle-rh2rs 3 жыл бұрын

Just found you today your a g.

@user-gp2bk1qm6u 3 жыл бұрын

Мопеду лет 40.

@strikermaximus365 3 жыл бұрын

A blacknDecker works wonders.

@strikermaximus365 3 жыл бұрын

Get a power drill to remove screws faster.

@stevenmandziuk4014 3 жыл бұрын

Another great video Mitch! I think it is super important to remove the intake from the bike too when you remove carb (to make sure that there are no cracks in it, plus it gives the opportunity to replace the oring that is between cylinder head and intake). Also, whoever reads this, don't use power tools to remove the screws, you will most likely strip them out. They actually sell a phillips style screwdriver for these specialty Japanese screws.