Honda Jazz (Fit) Mk1 (2002-2008) - Radio/Stereo Bluetooth Speaker Upgrade

Рет қаралды 38,830

5 жыл бұрын

Here's a cheap way to upgrade an old radio/stereo in a Mk1 Honda Jazz (Fit) with Bluetooth so it works like a wireless speaker. The Bluetooth module can be purchased cheaply from places like eBay. Other parts you'll probably have lying around. All in all this cost less than £5 plus a couple hours of work but works a treat!
Here's a link to some forums which have wiring diagrams and more info:
clubjazz.org/forum/index.php?...
h-tune.co.uk/club/guides/wiri...

Пікірлер: 51

@Drzewacz888 4 жыл бұрын

brilliant mod mate! will try this for sure! Getting my Jazz next week :)

@Juhsga 2 жыл бұрын

Good job on your video! You could have made that cleaner by soldering your red/blk wires straight onto the bluetooth module and removed the micro usb jack. Good job on the video though! And for the most part soldering has it's place but whenever you can you should use crimp splices for wires. I've soldered wires before and found they break over time vs splices hold up for much longer time.

@delcotelcomputersupport3897 4 жыл бұрын

good project looks easy

4 жыл бұрын

Wonderful!

@kristjanrobert9220 Жыл бұрын

thanks for the videos👍👍, kristjan from iceland Reykjavík

@eyesblue3123 9 ай бұрын

Do you know the code for factory settings

@jucdaz 2 жыл бұрын

Danke ich hab es auch repariert mit eine Luft Gebläse Einhel

@D3516AN 4 жыл бұрын

Thank you. Mine is working like a dream, however there’s a bit of a hiss when the car engine runs. Any idea to fix this?

@amp9438 4 жыл бұрын

Not sure really. I did have a problem with my audio lead which caused some noise due to a bad connection. Or maybe it could be interference coming from the usb power adaptor?

@mannydahri26 3 жыл бұрын

Deffo wire side connection most likely ground side of 12v or Bluetooth board. I'd had issues as similar hiss. An turned out to be board touch with the inside behind dlcd player metals

@luispatricio6707 2 жыл бұрын

Very nice video! Just wondering.. if you solder another aux cable "in parallel" with the other to the Dupont header will the radio accept both bluetooth and aux? Would it work? Thanks

@amp9438 2 жыл бұрын

Hi. Haven't tried it but think it would probably work

@luispatricio6707 2 жыл бұрын

@@amp9438 thank you for the quick reply, I Will probably try it. If so, I will give feedback

@RosinVFX 2 жыл бұрын

Do you know if you can remove those symbol rings on these jazz’s , the ones showing “off, 1,2,3,4, all the other heating systems etc” wondering if I can get those off

@amp9438 2 жыл бұрын

No idea sorry

@mucahitkahraman4666 4 жыл бұрын

Hey there, thanks for the video. I have just bought jazz 2003 automatic in Netherlands. And was looking for such mod to apply on mine. Just a quick question, is the powering wires should be same for a jazz in Netherlands? I mean the yellow/red one for positive, black for the negative?

@amp9438 4 жыл бұрын

Don't know if they are the same. I'd suggest using a multimeter to find the wire which has +12v and is linked to the ignition

@wayflesscotton7875 4 жыл бұрын

They are man. Sure you've sorted this out already.

@yankodimitrov5246 3 жыл бұрын

There is a readymade module on Aliexpress for like 7 usd.

@mosami9742 11 ай бұрын

@@yankodimitrov5246 can you please tell me what shall i write on ali express to get this 😢

@mosami9742 11 ай бұрын

Hi kahraman, may I know how did you solve this issue ? Did you try it in NL , does it work ? Or you find a solution

@stephenbettles2704 4 жыл бұрын

Did it come out ok without disconnecting the heaters cables? Because getting at the cables is a major ball ache. Radio has stopped working, suspecting a common problem with a voltage reg. cheers

@amp9438 4 жыл бұрын

Yes you should be able to pull it out far enough to access it without disconnecting the heater controls

@javedakhtaralizai1625 4 жыл бұрын

Hi can't get from China while Corona no post coming can I get from uk if you know please

@javedakhtaralizai1625 4 жыл бұрын

And also my radio sound is quite need IC502 I can't get on ebay I tried if you got any contact please

@waschbaers_werkstatt Жыл бұрын

Thanks for the info, i hope you isolated the leads with shrink tube or tape. 🦝🔧

@amp9438 Жыл бұрын

Yes I did :)

@DonTurqo 3 жыл бұрын

5:52 where can i find this cable? I have a Bluetooth board i can fix it with an open usb micro cable for power but i can’t find the cable with the pins...

@amp9438 3 жыл бұрын

Are you talking about the audio/aux cable? You can make it yourself with an audio lead and a 6 pin Dupont connector as per the video/links in description

@bigsasquatch7099 3 жыл бұрын

Is the DC power plug required, or did you just include it so there was still a fuse in the circuit? Could I, in theory, just wire a micro usb to the ignition 12v power lines as showed?

@amp9438 3 жыл бұрын

USB is 5v so you need to drop the voltage

@bigsasquatch7099 3 жыл бұрын

@@amp9438 cheers mate!!

4 жыл бұрын

Hello. Can you write the Aux cable sequence? Which one is right, which one is left and which one is common.

@amp9438 4 жыл бұрын

The links in the description should take you to the Honda forums which have the wiring diagrams

4 жыл бұрын

@@amp9438 Thank you.

@abdulbasit3371 3 жыл бұрын

Hi I've got the Bluetooth module working I was just wondering if it was possible to connect to the ignitions 12v system without soldering

@amp9438 3 жыл бұрын

Hi I think you can use these plastic connectors called scotch lock (or scotchlok) which allow you to tap the existing wiring. I didn't have them so just soldered.

@abdulbasit3371 3 жыл бұрын

@@amp9438 Wow I never knew they existed lol I haven't opened my head unit so I was thinking is there anyway I could trap my wires where the loom goes?

@beingatliberty 2 жыл бұрын

the h-tune website seems to be down and clubjazz doesn't link much - found your video - presumably the usb power board is just a cigarette power to usb adapter broken down to just the pcb to convert 12v safely down to 5 ? your video doesnt show clearly what usb power board you used could you link a suitable one?

@amp9438 2 жыл бұрын

Hi. The video shows what I used @1:45. A usb adapter for the cigarette lighter should work and convert the 12v to 5v. Any will do I think. I just took mine apart and soldered some wires onto the cigarette lighter contacts.

@fishwithivan8562 Жыл бұрын

that part you fitted can that affect the cd player from working ?

@amp9438 Жыл бұрын

No you use the AUX button on the radio to switch to using this.

@dedoguitarman 2 жыл бұрын

hello my friend and congrats for the SUPER HINT :)..i bought the same module, tried at home was clean and perfect, in my honda jazz is very noisy before pairing; after pairing clean but low output, what could be? i used a 12 to 5 car adapter, maybe should try with other models more stabilized...someone suggest to install an isolated converter DC DC 5v to 5v...what do you think?

@dedoguitarman 2 жыл бұрын

Also if i make a call audio comes out from speakers but no voice from built in phone mic...same to you?

@amp9438 2 жыл бұрын

Hi. I would test the audio lead is working ok as I had noise problems with it due to a bad connection. Maybe try a different source via the audio jack to see if there is still the sound problem from the radio? Also I can't make calls with mine as it only works as a wireless speaker.

@dedoguitarman 2 жыл бұрын

@@amp9438 thanks for your answer...i also tried to route the audio to use built in telephone mic but in Android 12 seems to be quite impossible