Honda Jazz Radio IC502 replacement for no radio sound fault

Рет қаралды 70,336

Күн бұрын

Replacing the surface mount IC502 in a faulty Honda Jazz radio. This is the fix for no radio audio (well, perhaps a bit of low static) with the CD player working fine

Пікірлер: 63

@bigpopasmurf 3 жыл бұрын

I can't believe it actually bloody worked!!! Thankyou very much, my jazz will never die!!!

@the_equalizor 3 жыл бұрын

You’re very welcome. Glad it all works now.

@9525FHY 2 жыл бұрын

Great man! That’s just what happens to the car of my sons! Thanks a lot. Great job!!!

@jeromeparis-antonini9326 Жыл бұрын

It worked for me. But I used a regular soldering iron and that was such a pain. I do recommend using whatever is used in the video, it's way more effective. Thank you sir.

@the_equalizor Жыл бұрын

Yeah hot air makes this job a lot easier. I use the Quick 861DW station for this kind of rework. Thank you for your comment 🙂

@peterkovacs6787 3 жыл бұрын

Thank you Sire! Very Very thanks! 👍

@petergazdag3020 Жыл бұрын

It was a great video and explanation! Than you!

@tesscalderon5848 3 жыл бұрын

Hello! Thanks for the video. You only use heat to fix the new one?

@tesscalderon5848 3 жыл бұрын

Hello, thank you it worked fine! But now the CD button is not working, as well as some others, do you know to what it can be due? Thanks!!

@MAK16012 2 жыл бұрын

So I'm giving the repair a go... First time for me with a circuit board so pardon my french, when unsoldering the piece one of the four metallic things came off the board (the one closest to what looks like a small battery) is this very bad? Or can I just replace it in its spot and carry on? Thank you for your wisdom!

@alexanderfrederiks8481 4 жыл бұрын

Thanks, I am going to try this as soon as the spare (ROHM BA08CC0WFP-E2) arrives.

@the_equalizor 4 жыл бұрын

Alexander Frederiks Excellent! It’s not a difficult repair and saves it going into landfill and you having to buy another one.

@alexanderfrederiks8481 4 жыл бұрын

@@the_equalizor Replaced it today, radio works great again ! Its actually a easy fix if you can handle a soldering iron. Thanks for the vid.

@the_equalizor 4 жыл бұрын

@@alexanderfrederiks8481 Brilliant. Yup, its an easy enough job. I think the only thing I'd say is for anyone doing this to make sure that the metal tab is soldered down properly to the PCB as thats how it dissipates heat. Thats why I like using hot air for that kind of thing, it melts the solder evenly right onto the Tab and the Copper PCB pad. But a decent soldering iron and flux will do a good job too. Glad you fixed it and stoked you found my video useful.

@menyar4444 3 жыл бұрын

The same radio that I have, it turns on all of a sudden and all of a sudden it doesn't work, possible solution, please

@mitkoivanov5586 2 жыл бұрын

Hello my radio and cd not working ? Did I have to change the some circuit board ? My number of the circuit is different from your / BA00AS/1A 80 ! It is important. It is Honda jazz 2002

@BattiBallero Жыл бұрын

Thanks very much great video

@George_Argirakis 3 жыл бұрын

Congratulations for your video, I have one question, why you replaced the BA00AS (low drop-out variable output voltage regulator) with the 08CCOW (low drop-out fixed 8 volts output voltage regulator)? If Ι am not wrong the BA00AS is adjusted through the smd resistors 133( = 13KΩ) and 222 (2.2KΩ) for about 8,625 Volts and is also available from internet shops. Thank you in advance.

@the_equalizor 3 жыл бұрын

IIRC I had difficulty sourcing the Variable Output version, so I replaced it with the 8v fixed output. The package type, specs and pinout are identical except pin 5 which on the 00 is used to for voltage adjustment and on the 08 is left unconnected. This means that the voltage set resistors on the PCB are ignored by the fixed output regulator.

@jayon8316 3 жыл бұрын

Thankyou for this video! What kind of liquids are you using?

@robscott6794 3 жыл бұрын

Just Kingbo RMA-218 flux to assist with soldering/hot air work, and isopropyl alcohol for cleanup.

@petervanwijk2639 2 жыл бұрын

I have a Jazz of 2002, and radio stopped first, now the CD plagerig as well. The only ring wicht still works is cd eject and lading. It shows the track and without actualky storting the screens goes blank. Samen problem? What do you think?

@petervanwijk2639 2 жыл бұрын

Sorry for autocorrect..

@aleksandrzinkevics1253 4 жыл бұрын

looking to buy soldering station. which one you use please?

@the_equalizor 4 жыл бұрын

For this job I used a JBC CD-2SE station. This has the T210 handpiece and comes with a couple of tips. I have linked it below : kaisertech.co.uk/jbc-cd-2se-precision-soldering-station

@hillelberg6398 3 жыл бұрын

I just ordered the piece. Wish me luck.

@the_equalizor 3 жыл бұрын

Good luck! It’s a nice easy repair though so I’m sure you’ll do just fine.

@SiaD777 3 жыл бұрын

My radio doesn't work but the cd player does, however there's no static noise even at maximum volume and it's stuck on one radio station and it's impossible to change station. Do you think it could be the same problem?

@the_equalizor 3 жыл бұрын

Sia D Yes, that’s exactly how the issue presents, CD player works fine, radio doesn’t.

@SiaD777 3 жыл бұрын

Ok will give it a go then, thanks. 👍🏻

@dedoguitarman Жыл бұрын

Hello, i did the regulator replacement, and worked like a charm! After a while the car stereo is randomly rebooting with a sort of choke and 20 seconds of apparent death, the other sympthom is display backlight dimming half/weak/zero/full again in a random way. I don't think is correlated with the IC502 fix, it happens in all modes (CD,AUX)...do you have any clue? Thanks in advance

@trikstamanq Жыл бұрын

I have this issue too, screen goes very dark flickers and currently it's just really dark.

@dedoguitarman Жыл бұрын

@@trikstamanq may be faulty regulator or some issue in pcb?

@trikstamanq Жыл бұрын

@@dedoguitarman possibly, gonna take it out and get it scanned to see if there's a short anywhere on the PCB

@dedoguitarman Жыл бұрын

@@trikstamanq did you buy it on AliExpress?

@richardbicknell935 2 жыл бұрын

Hi, I have the same radio. Mine works but as the interior of the car get hotter the buttons stop working. For some reason button number 1 is the last to go. They progressively stop working from right to left across the dash. Have you heard of this fault?

@the_equalizor 2 жыл бұрын

This could easily be the regulator overheating, so for the cost of doing it, I'd recommend just replacing it anyway.

@omerkaraca9083 3 жыл бұрын

Hi thank you for video. My radio is no sound. İ have a New BA00AS. Why you use 08CC0W. İ should use BA00AS or not should use

@the_equalizor 3 жыл бұрын

I used the 08 as it was what was easiest to get hold of at the time. Either regulator will work just as well.

@theeternalrest9789 Жыл бұрын

Ti ringrazio tanto per questo video, grazie a te sono salvo, era da circa 3 anni che l'autoradio di mia moglie era rotta, grazie al tuo aiuto e con pochi euro l'ho finalmente sistemata, e mia moglie non mi stresserà più... Per ora😂🤣😜

@swarz987 6 ай бұрын

Quindi praticamente che pezzo bisogna acquistare e di quali strumenti servirsi? Sono ignorante in materia, cosa devo cercare su google per eseguire la riparazione? Grazie

@doomanygf3017 2 жыл бұрын

thanks , but was is the serial number of this regulator? or how can i buy it?

@the_equalizor 2 жыл бұрын

It’s a Rohm BA00AS LDO variable voltage version, or you can also use the fixed 8v out version too. It has the same pin out and footprint.

@menyar4444 3 жыл бұрын

I have a radio the same as once it works and once it is not working it can fix the problem

@jurajsmutny8171 Жыл бұрын

Hello , pls does it still works with your replacement ? Because one guy replaced it with BA00S and it worked only for half year

@the_equalizor Жыл бұрын

The radio is still working great for my sister. The part I used is electrically identical to the original part except that it I think it was adjustable instead of fixed voltage.

@jurajsmutny8171 Жыл бұрын

@@the_equalizor ok than I am glad :) Maybye that guy has also othrr issue or wrong repaired when worsk only half year ;)

@the_equalizor Жыл бұрын

@@jurajsmutny8171 It could be it was overheated when fitted maybe. No one else has reported this issue on this video's comments so sounds like its an unusual occurrence.

@miteshgohil521 2 жыл бұрын

The same just happened to my car, where you based?

@simonrawle7885 2 жыл бұрын

hi wot temp did you have the air set to . thanks in advanced

@the_equalizor 2 жыл бұрын

My temp is pretty much always set to 350c.

@simonrawle7885 2 жыл бұрын

@@the_equalizor ta . managed to do it with a flux and a normal soldering iron

@will_doherty Жыл бұрын

Next things to fail will be the electrolytic capacitors around that component - they don't take being heated very well, it's fortunate that none of them popped whilst you were heating them. Should have either shielded them, or else heated from the underside of the board if there was nothing in the way...

@will_doherty Жыл бұрын

Just done mine - I can confirm there're no components/plastics underneath the board in that area, so I used hot air from underneath. Worked nicely... Thanks for your video, saved me some head scratching and time 🙂

@the_equalizor Жыл бұрын

Thank you for your comment, that will definitely help other people doing this repair. I did keep an eye on the caps (i looking for signs of the plastic wrapper on them burning and they seemed okay and weren’t bulging by the end so so all good, radio still working.

@will_doherty Жыл бұрын

@@the_equalizor Thanks for your reply - happy to say mine too, so all good :-)