Honda Lift Kits & Spacers Explained!

Рет қаралды 22,562

CRV_TOM

4 жыл бұрын

Lifted Honda questions on spacers and lift kits hopefully this helps explain a little bit of how they work.

Пікірлер: 60

@applepoop10 3 жыл бұрын

Everyone slams Honda's, but it only takes a unique special group of people to lift Hondas. :)

@lafunieplays Жыл бұрын

just the right comment i was looking for god tier

@MSWABMS 2 ай бұрын

I want to raise not lower my Honda 😅

@crv_tom 2 ай бұрын

Hey, well, that's what's great there is an avenue for pretty much anything you want to do with your Honda.

@shadwell749 3 жыл бұрын

Seth Rogan knows what he's talking about

@crv_tom 3 жыл бұрын

😂😂😂 you don't know how many times I've been told that man that's funny I need to start getting paid like him LOL

@sylviaortega7180 3 жыл бұрын

Thank you for this! Just bought my 2nd Gen CRV and I’m extremely excited to lift it!

@crv_tom 3 жыл бұрын

Hope you enjoy it!

@tylergiles9717 2 жыл бұрын

This might sound crazy but I want to lift my CRV 3 inches and this is the first video I came across.. we’ll see. Great video!

@justincase1575 Жыл бұрын

I need to lift mine so as to be able to get in it! I’m 70 and getting in and out is the only thing I hate about my accord. 2” lift blocks would make me a happy man!

@crv_tom Жыл бұрын

Depending on your year Accord you may have them you would have to take a look at his website.

@RootSuitMan 2 жыл бұрын

Thanks Seth Rogen! Would lifting a Honda Crosstour with 3 inch spacers require extended control arms or any other additional parts?

@crv_tom Жыл бұрын

That's funnier than hell you're not the first person to say that I've literally accepted it now 😂 but honestly I have not done a Crosstour myself but I can tell you if you can get a hold of hrg they have done one and could definitely help you out

@CaptainTexas92 3 жыл бұрын

Hey, I had a few questions if and when you get some time to answer. 1. I have a FWD 2001 Cr-v do the spacers have any negative effects on the rear without the cv shafts for reinforcement? 2. I’m looking to purchase ASR spacers 1.5/2.0 inch lift. Will I need to modify anything after adding these spacers I see some conflicting information about subframe drops on HRG. The whole idea behind the lift for my Cr-v isn’t for off-road ability it’s more to allow ample room for general grabbers at2 215/75r15 to try and give me some clearance for the yearly mild/moderate flooding that is a part of living in Houston. Not trying to turn it into a flood buggy just trying to add a little “assurance”.

@crv_tom 3 жыл бұрын

With that size spacers you will be completely fine you will not need a supreme drop as long as you don't grow any bigger than that. Having a front-wheel drive will not make a difference and how the spacers will perform so you'll be good to go.

@CaptainTexas92 3 жыл бұрын

@@crv_tom thanks for the answer. Hopefully everything goes smooth with the lift. It’s a good little car it will feel a lot better to relax driving that on rainy days instead of my lowered civic.

@reg1134 3 жыл бұрын

Love the vid, when you lift a civic do u do the same size on front and rear or do you use different sizes?

@crv_tom 3 жыл бұрын

Different size for the front and rear

@WeekendSoftRoading 3 жыл бұрын

Hi, Great Video as always, I asked a question on your other video about a 1-inch lift spacer in the front and a 1.5 lift spacer in the rear for my 04 CRV. However, with the lift spacers does this mean the front will be lifted 1.5 to 2~ inches and the rear will be lifted 2.5 to 3~ inches am I understanding this correctly?

@crv_tom 3 жыл бұрын

Yes that is pretty much how it will work if I am not super efficient at explaining this who is much better at this than me is Ben from hrg or Jake they can explain it very well.

@crv_tom 3 жыл бұрын

Also thanks very much for the compliment on the videos man I appreciate that

@mrcreamy6006 Жыл бұрын

They should make a spacer u can just stack on top of another one so u can lift it as much as u want

@crv_tom Жыл бұрын

You could bolt them together if you wanted to I wouldn't recommend it but you could.

@Chubbydippin 2 жыл бұрын

Any thoughts or guidance regarding a 2017 HRV LX front wheel drive? Looking to put on a hitch for a small trailer and was concerned about the added rear weight. My thoughts were the rear lowering too much and or in turn causing the front end to rise. Since it's a front wheel drive I worry about possibly losing some control and or traction on the front wheels while under load on the rear. Not looking to tow thousands of lbs but wanted to pre compensate the rear for the load. Maybe it'll be ok without, just thought I'd ask. I've considered slightly lifting the front and rear to allow larger, not so low profile, tires as well. Been scouring different sites and really haven't found any lifting advice regarding any of this with my vehicle. Thankyou for doing this segment.

@Chubbydippin 2 жыл бұрын

I don't know if it even matters, but I forgot to mention my 2017 hrv is a 6 speed manual transmission. Thanks again.

@crv_tom 2 жыл бұрын

I honestly think you'll do just fine and you don't have to worry too much as long as you drive responsibly you should have much of an issue but one thing you could look into is a stiffer spring if they offer one for the rear end or possibly a mild lift front and rear and then add a stiffer strut and spring.

@TheJT199 3 жыл бұрын

Can’t seem to find what type of strut is best. Have you ever tried the old man emu stuff?

@crv_tom 3 жыл бұрын

I have never tried their struts but I have tried their Springs and they are good stuff

@rob3071 Жыл бұрын

Question.....What else is needed to lift? Can I do 1.5 inch spacers on a gen1 crv without anything else like adjustable arms, camber bolts?

@crv_tom Жыл бұрын

You should be fine you shouldn't need anything else with that low of a lift with everything stock you should be able to still make the adjustment, of course some camber kits would probably help dial it in a little bit better but you'll be okay with the stock stuff.

@GigaCivic Жыл бұрын

Any chance you could tell me if the Honda rescue garage spacers fit an ef hatch?

@crv_tom Жыл бұрын

They have some take a look at their website at hrgoffroad.com

@dbalta915 2 жыл бұрын

Our streets get flooded when it rains so I would like to lift a civic

@bryceoxbro8536 7 ай бұрын

Can I use a 3in strut lift on a completely stock frame and front end ??

@crv_tom 7 ай бұрын

At that point I would recommend a suffering drop.

@AbandonedExplorationUrbex1979 2 жыл бұрын

You should have the links to these lift spacers in the description in case someone wanted to order it.

@crv_tom 2 жыл бұрын

Hey absolutely sorry about that this is a much older video and I plan on going through my whole KZfaq and doing a revamp soon a lot of things have changed so got a lot of updating to do but it just takes time

@crv_tom 2 жыл бұрын

Hrgengineering.com is where to fine them!

@AbandonedExplorationUrbex1979 2 жыл бұрын

@@crv_tom I looked on there but I didn’t see those metal ones that go on top of the strut .

@TheBnvirulent 10 ай бұрын

HRG has the metal ones but I'm intrested in the alum. Ones, they look much easier to install. Do they had fior front and rear applications?

@blameTheDane 4 жыл бұрын

Wait WHAT? :D i was completely engage in the lesson, and then you just leave me hanging to take a phone call! wtf dude! :D

@crv_tom 4 жыл бұрын

😅 sorry about that my man I probly didn't fully look at the video before I Uploaded it 😂 I will watch it and see if I can go over it and make it better version of it!

@blameTheDane 4 жыл бұрын

@@crv_tom Its all good mate, i learned a lot from what there was in the video, nice explaining, so dont remove it :) im thinking about lifting a smaller car, do you know anything about european brands like Peugeot or VW and which has the better track records of not breaking down?

@pnw6139 Жыл бұрын

Will I need anything else for 2 Inch spacers I’m simply trying to run a 235/75r15 on my 02 crv for clearance

@crv_tom Жыл бұрын

With 2 in you can get away with it but I would recommend still doing a subframe drop if you're going to keep the vehicle and want to get the best longevity out of it.

@pnw6139 Жыл бұрын

I’m a bit new to this what’s a subframe drop going to do for longevity?

@pnw6139 Жыл бұрын

I got the tires on no rubbing but just want a bit more clearance, what do you think a shop will charge to have them install 2 inch lift spacers?

@ishice3749 2 ай бұрын

You explained the front one but how about the rear one for example the 8th generation the rear one isn’t like those

@crv_tom Ай бұрын

As far as the 8th gen I have not been able to get my hands on those or personally work on them so I would not feel comfortable saying much about them.

@MRS.CRV_TOM 4 жыл бұрын

❤❤

@crv_tom 4 жыл бұрын

😘😘

@illmotiv3 2 жыл бұрын

I want to lift my 09 accord

@joehain83 3 жыл бұрын

They make a 5/5.5 lift for a 2012 odyssey exl

@crv_tom 3 жыл бұрын

Who does?

@larryhaywood4105 3 жыл бұрын

Hi r you I have a 2014 Scion xB I have struts in in front of it Iam 4 lift kit & spacer in steel 2 I want to put lift kit all around do no u no makes it

@larryhaywood4105 3 жыл бұрын

I need a 2 inch

@MyIronman8 2 жыл бұрын

Why don't you make Honda fit lifts

@crv_tom 2 жыл бұрын

I do not make the kits it is hrg engineering that makes the kits and as far as I know I believe that is something they are looking to do in the future.

@MyIronman8 2 жыл бұрын

Tema their called

@crv_tom 2 жыл бұрын

???