Great news!!!!

Do you know why manual shift paddles dont work?

Thank you!

Thank you! just trying to help others in the same boat!

Thanks for the sub!

Yes it should. just ensure buggy is completely warmed up before starting process

Are you letting. The machine COMPLETELY warm up before starting procedure?

Pioneer 700 is torque converter like a car. No clutch that engages like the 1000.

Kenton, please make sure the buggy is COMPLETELY warmed up before starting the procedure. This seems to be the most common issue with getting to work

@@aeroimagingsolutions8716 yes the fan turns on and goes off - deffinatly warm. the first day i tried for a couple hours and it finally worked. but didnt fix my shifting problem. so i tried to relearn again after i cleaned things up, still trying to get it. honda tech line is no use.

@@kentonprather4832 I would pull the positive on the battery, let completely reset then try again. Took me a few times to get it also

@@aeroimagingsolutions8716 no luckkk... about to light on fire :)

Start the process over. You will want to make sure that the Pioneer is COMPLETELY warmed up before starting the process. (Let idle for a solid 10 minutes before going through relearn procedure)

@@aeroimagingsolutions8716 well I let ‘er run for about 15 minutes and had the same result, I never get the P just the - symbol, the AT MT never go away, thank you so much for the help my man.

@@Kolt45AK49 i have same problem, how did you fix this!

? How did you guys fix it I have the same issue

Me too!!! Plenty warm, now my AT MT lights stay on, no matter what I do. Odd that someone would suggest such a 'relearn' procedure, but not know how to resolve the issues that come with the video explanation. For that... might have to get a thumbs down. No response to those with this issue, other than "start the process over" or "make sure it's warmed up". Yup... real high tech trouble shooter there!!

Plug in the seatbelt behind you before starting this procedure if possible

Same problem did you resolve the problem

gents, make sure the buggy is COMPLETELY warmed up before starting this process. otherwise it won’t take

@@aeroimagingsolutions8716 MY FANS ARE OM SO IT WARM

How did you guys fix the problem

Mine too what did you end up doing?

Sorry this didn’t work for you, JohnnyAirtime! A quick scroll through the comments will show this has worked for a LOT of people. I am not a Honda technician, I have simply put into easy instructions a convoluted process in the Pioneer service manual. I quick internet search shows that if the AT/MT light won’t go out, it can be a voltage issue, cold engine/oil, or a smoked clutch pack. Good Luck.

I did more research and found the issue; ---------------------------------- copied and pasted from a FB group ---------------------------------- This video he didn’t do the sequence properly that is why it didn’t do a relearn. (speaking of this video of yours) You don’t have to wait for seatbelt light to go off. If your sequence isn’t done in order, in a timely manner or not warm enough it won’t go through. Pioneer and talon clutch relearn. ◦ Make sure engine is fully warmed up to normal operating temperature (2 bars) or till you hear the fan run. ◦ Key on engine off ◦ Press the accelerator pedal to the floor 3 times and hold it to the floor on third time. ◦ While holding accelerator down move the shifter from P to L to P to L to P ( making sure to see P,L on dash every time) ◦ Let off the accelerator throttle the display should show a “-“. ◦ Crank up the engine and let Idle till the dash goes blank “-“ to “ “. ( this could take a few minutes) ◦ Turn key off clutch relearn is successful.

Glad you got it worked out! Next time, maybe start with the Facebook group instead of lashing out and calling someone that is trying to help the Pioneer community “LAME”. Move on, Troll.

too funny.... I'm now a troll, for not giving an incorrect re-learn process a thumbs up and calling it LAME that you're not helping those who have the SAME issue I did from your incorrect process. I hope others learn the correct way, and they can eliminate the AT MT lights from my comment (copy and paste method/process). I don't need to be "liked" and "subscribed" to know my worth. Maybe delete the video, and do a correct version of the process?! Good luck.