Honda Rancher 350 Front Brake Cylinder Rebuild

No video

Honda Rancher 350 Front Brake Cylinder Rebuild | Partzilla.com

Рет қаралды 72,582

Күн бұрын

Get the parts for your Honda Rancher brake cylinder rebuild: bit.ly/hhonda-r...
Follow along as John shows you how to replace the brake cylinder on a Honda ATV. He’s using a complete brake cylinder assembly to rebuild the brakes on our 2003 Honda Rancher 350, so he’ll start by disassembling the wheel and removing the brake drum. Then John will show you how to remove the brake shoes and then take off the old brake cylinders. Then, he’ll install the new Honda brake cylinder assemblies and use a sealant to protect the inside of the brake drum.
When you finish the job, be sure to bleed the brakes on your Honda Rancher. Here’s how:
• How to Bleed the Brake...
Read how to do this step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Disassembling the hub - 1:20
Removing the brake shoes - 2:40
Removing the old brake cylinders - 3:05
Installing the new brake cylinders - 5:05
Reinstalling the brake shoes - 7:55
Reassembling the hub - 8:24
Buy Honda ATV parts here: www.partzilla.c...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2003 Honda Rancher TRX350TM, but you will have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Honda Rancher front brake shoe change:
• How to Change the Fron...
Honda Rancher rear brake shoe change:
• How to Change the Rear...

Пікірлер: 43

@kylefrench8944 3 ай бұрын

Easier ways of doing it is to take your main brake line off and then take the four bolts that hold the plate on then just take the whole plate off that way you can reach all Bolt to take the cylinders off, which gives you a lot more room

@tayg9175 6 ай бұрын

Thank you John 👍🏻

@carlgoodson8086 2 ай бұрын

Love the 350 content

@PartzillaParts 2 ай бұрын

One of these days we're gonna get our hands on another one and do more videos.

@casper3130 2 жыл бұрын

The cost to rebuild vs buying new cylinders? A rebuild kit is 15-19 bucks per and a replacement cylinder is 31-40 per and this isn't a cylinder rebuild its a cylinder replacement video

@chrisalister2297 4 жыл бұрын

Awesome videos. Well thought out, good pace, tid-bits of useful information. This is why I bought my parts with your guys.

@Series2tdi 4 жыл бұрын

Excellent video. I bought the brake Union spanner and the nuts are still perfect.

@ringsidejudge4302 3 жыл бұрын

This is a really good channel , oozing professionalism , and great imaging . Many thanks

@traceykays433 4 жыл бұрын

Well u sure made that look easy. Great professional job. I bit mine don't go that smooth. Thank u for sharing ur knowledge.

@kobaltkrimson1868 9 ай бұрын

Did your drum housing come off that easily or did you have to fight it? Mine is a 4x4 and the housing will not come off

@hondaman6918 10 ай бұрын

I learn so much from your vids, thanks!!!

@terryroberts1910 Жыл бұрын

How do you get the air of the breaks

@nate0601 Ай бұрын

Thread pitch on the brake line fitting? Stripped a wheel cylinder and need to tap it

@keeganfoster1792 4 жыл бұрын

I must say I don’t like Honda’s brake designs with drum assembly I really think disc brakes are definitely the way to go on atvs

@joshfinney8821 3 жыл бұрын

i mean most trucks were still using drum brakes at the time

@williammurphy8559 Жыл бұрын

Had a question about the bulk vacum hose on the front left and right wheels that leads to the rear wheel and rear axle. Could you help me out on where the lead to and where the end of hose needs to vent to?

@rafaelespinoza8753 5 ай бұрын

Buendia donde puedo consguirlo le puse unos nuevos ya lo intente mucha veces de purgarlo esta igual no afrena es una trx honda rancher 2006 350

@johnbrakingground 6 жыл бұрын

This was not a rebuild it was a part swap

@RaisedinAlaska 3 жыл бұрын

Very well done video. Thank you.

@K-E-7V-7V-Y93 4 жыл бұрын

i have a 2002 Honda Rancher TRX350FM which wheel cylinders would i need to buy ?? its at my buddys right now so i cant check to see what ones are already on there

@michaelguidry9227 Жыл бұрын

You are AWESOMEEEEEE

@hunterray8210 5 жыл бұрын

Hey john , I have done this same process and even changed out the break cylinder and on my right side one of the wheel cylinders still doesn’t engage when I press the breaks . I have bled them with my pump and can’t figure out why it won’t engage. Do you think it’s something to do with the hard line running break fluid to that wheel cylinder . (Note: that sand wheel cylinder didn’t work before I replaced them all the others functioned .

@curtisparker3107 8 ай бұрын

He left out an important step in his video. He didn't turn the adjusting screws on each cylinder. That's the sprocket-looking thing that he turned with his screwdriver through the little hole in the hub. You have to turn those in the direction of the arrow on the cylinder to push up the brake shoe close to the drum. I had to turn it quite a bit. Turn it until it stops the hub from turning, then back it off a little so it can turn.

@MsWayne2002 5 жыл бұрын

Do u have video breather line change

@PartzillaParts 5 жыл бұрын

Not yet! We'll add it to the to-do list!

@joshslaughter9443 7 жыл бұрын

Can you tell me how to fix a code 3 on a 2010 Polaris sportsman and I've tried the voltage regulator and put the throttle cable to it's position and I will run a few minutes and and as soon as it warms up and you give it gas it starts acting like it has a rev limiter at about 2500 rpm it just started doing it

@PartzillaParts 7 жыл бұрын

Check with your dealer to see if your unit has an update. This situation usually revolves around the ecu.

@joshslaughter9443 7 жыл бұрын

Partzilla ok!! thank you!!!!!