Holosun EPS (full size) vs 509T

Рет қаралды 123,344

Жыл бұрын

The Holosun EPS full size is arguably the best pistol red dot in Holosun's catalog, if you've got a slide that's actually cut for it. Like the EPS Carry, the EPS full size direct mounts to the Holosun K optics cut, despite being much larger. There are vanishingly few full size handguns that are factory cut with the Holosun K cut, at least so far.
Support this channel on SubscribeStar:
www.subscribestar.com/hoplopf...
Sponsor, affiliate, and social media links:
linktr.ee/hoplopfheil

Пікірлер: 392

@possumpatrol45 Жыл бұрын

The best part of having a red dot sight on your pistol is pointing it at the sky next to the sunset and pretending the dot is a second sun and you are Luke Skywalker on Tatooine.

@Senator-Wary Жыл бұрын

Nerd

@sidneyhuckabee3598 Жыл бұрын

Can confirm I do this too 😅

@gleamtarrest6310 Жыл бұрын

Winner Winner Chicken Dinner!

@jake9705 Жыл бұрын

Go to bed, James Reeves, you're drunk.

@404DecadeNotAvailable Жыл бұрын

I mean, you’re not *wrong* just very odd

@nurse-dude Жыл бұрын

Im convinced that Hops hatred of solar cells is solely based on his fear of the sun considering he lives in the PNW

@huntersam4028 3 ай бұрын

Vampire confirmed?

@VincitOmniaVeritas7 Жыл бұрын

Those micro red dots work great with 1911/2011s and their narrow slides. The Platypus has the option for a factory RMSc/Holosun K slide cut.

@eugenechurch6135 Жыл бұрын

Bingo

@jay-firstofhisname Жыл бұрын

Would work good and any gun with a single stack magazine.

@shinobi-no-bueno Жыл бұрын

My dream gun

@MSSynsyterGates Жыл бұрын

Yep, I have one of these on my Platypus. I'd love to see Hop try one of them out.

@MSSynsyterGates Жыл бұрын

@@shinobi-no-bueno You should absolutely get one. I love mine.

@Buck762 Жыл бұрын

The EPS is my first pistol mounted dot. I feel like I made the right decision.

@workingguy6666 Жыл бұрын

The Vulcan ACSS reticle is the right decision. Anything else is an old-school red dot... even if they're green.

@shinobi-no-bueno Жыл бұрын

@@workingguy6666ok doomer

@lililililililili8667 Жыл бұрын

@@workingguy6666 I just like the vulcan because I really like chevrons. You grow out of the ring thing super quick if you do some dry fires after work. Wish it was a second reticle you could aim with like a 2moa dot.

@Aperson156 Жыл бұрын

@@workingguy6666I wish they made an EPS with that reticle but they said they don't have plans to, unfortunately

@americanviking4601 9 ай бұрын

@@workingguy6666the Vulcan reticle has so much emitting to make that ring, that it interferes in many types of lighting conditions, just like the 32 moa ring does. And it’s for noobs

@dutch4260 Жыл бұрын

I love my EPS. It's miles easier to clean than a closed emitter when carrying concealed. Lint builds up much easier when I carry an open emitter. It's survived my M&P 10MM 4" so far with no issues. The Eotech EFLX did not survive on that gun. It lost zero after a couple of range trips and when I dropped the slide by mistake the emitter broke and lost zero forever. Got a replacement from Eotech, sold it, bought the EPS and never looked back.

@thorshammer5134 Жыл бұрын

I put the 407k on my 4.6 2.0 10mm and it’s doing great. Plus it doesn’t stick out at all when carrying it. Sometimes the bigger optics push your shirt out. I don’t find it any hard to draw and find the dot.

@EDVERSiTY Жыл бұрын

It's insane how trash those EFLXs seem to be, from what you've posted to glass literally falling out of the housing.

@dutch4260 Жыл бұрын

@@EDVERSiTY Yeah.... Sage Dynamic's testing on the EFLX showed me it wasn't an isolated issue. One of the staff at the gun range I frequent talked about having the EXACT same issues as I did with one on his Staccato.

@dutch4260 Жыл бұрын

@@EDVERSiTY Sage Dynamic's review substantiated everything I just said too. America still cannot make a good red dot. I love everything about the EFLX (exept for the buttons) it just does not work and will break if it's on anything other than a safe queen.

@justinkase1360 8 ай бұрын

Good to hear, Just bought one for my fk BRNO.

@show8809 Жыл бұрын

For anyone wondering the eps will fit on a staccato c2 with there Dawson Eps carry plate and screws from calculated kinetics which are longer.

@vwtyty Жыл бұрын

I think using the same K footprint on both the EPS and EPS Carry means we could be one step closer to a universal optic footprint. Standardization takes some time, but once all red dots mount using the same footprint, all handguns come with K cut slides and everyone will run a red dot on their pistol.

@That_Guy5575 Жыл бұрын

The Canik METE SFx and SFT both are full sized pistols with the RMSCC footprint

@BrassFacts Жыл бұрын

the only purpose for the 509t seems to be that there's more adapters for it to mount to rifles than the k cut. I suspect that will change fairly soon.

@Senator-Wary Жыл бұрын

Brass boi

@shaggnar2014 Жыл бұрын

It's also a titanium housing which should be more durable. Unless they make an EPS-T then it'll certainly be obsolete

@bradenmchenry995 Жыл бұрын

You shouldn’t be mounting pistol red dots to rifles anyways with the insane parallax problems

@HariboStarman Жыл бұрын

If they’re virtually the same, why not just stick with the RMR pattern 509t?

@HotelBravo556 Жыл бұрын

@@HariboStarman The 509T is not RMR pattern. It includes a heavy, thick, RMR pattern adapter plate for the 509T to clamp to.

@andersalbertsson215 Жыл бұрын

I just had one mounted to the top of a LPVO as a passive dot, via welding the included plate to the top of a scope ring. Works well so far

@MirageTactics Жыл бұрын

509T on my razor, EPS on my duty pistol 👍

@sikaaaa Жыл бұрын

Welding the plate to a scope ring is smart as hell lmao. Sure beats expensive proprietary shit

@andersalbertsson215 Жыл бұрын

@@sikaaaa just have to know a good aluminum welding guy lol

@sikaaaa Жыл бұрын

@@andersalbertsson215 Meet my friend J.B.

@vanya5019 Жыл бұрын

Holosun please release an RMR cut enclosed optic (preferably with the vulcan reticle)

@lobstereleven4610 Жыл бұрын

3:15 omg you two are wearing matching shirts! how cute! lol

@RedEyePergo Жыл бұрын

Canik is direct cut for the K pattern . Screws straight into the slide just uses a polymer spacer . I run an EPS on my Canik Mete SF . The window is the same size as the 407C and 507C but with the benefits of a lower deck height , enclosed emmiter and smaller footprint .

@boom_911 5 ай бұрын

Where do you get the polymer spacer?

@Windowlick_ Жыл бұрын

Why he eepy S

@SludgeManCometh Жыл бұрын

Him a growin' boy

@tonywentoutside Жыл бұрын

How is this comment a week old when the video came out 10 mins ago??

@voquocan7381 Жыл бұрын

@@tonywentoutsideearly access

@grifdenton5224 Жыл бұрын

the holosun is very tired. he is eepy. the holosun has had a very long day of plinking targets and wants to take just a small sleep. he eeby and neebies to sleebie. holosun sleepy and need bed by time. the holosun is currently experiencing critical levels of being a sleehjy little guy and needs to go to beb. he is vertired and needs to slep. just a little sleejing time as a treat. holosub neebs to slek for twired boyo. just a lil guy. holosupaleebeelee needs his beaty sleep. look at him go! he yawn bib cause he skeegy. neebs to falafel asleep. ni ni time. goodnight, mr holosun.

@bakedandsteaked Жыл бұрын

Bruh

@shooteveryday1841 Жыл бұрын

I really like the EPS carry Mrs. It makes my M&p 5.7 perfect for IWB carry. The circle is training wheels for finding your dot on a fast draw

@limasierraone7107 3 ай бұрын

I was an early adopter of the 509-T and I like it but when I finally got around to getting the EPS green 6 MOA mounted on my Shadow Systems MR920 with the SS shim plate I fell in love with it! It is a major step in the right direction.

@thegreenberetlife0191 Жыл бұрын

I run a full size EPS on a Shadow 2, USPSA Carry Optics gun and have a dovetailed Glock rear suppressor sight that co-witnesses with the stock Dawson Precision front sight. This setup is an absolutely a perfect match... I would run this optic on all of my pistols if I could...

@RP-ks6ly Жыл бұрын

Glad to see you went with the Shadow Systems MR920. That has been one of the best pistols I have ever owned/shot/carried.

@cornfedchris58 Жыл бұрын

Same I love mine and also have an eps on it. Great combo

@Osprey1994 Жыл бұрын

He has had it for a bit.

@kilroy5166 Жыл бұрын

@@ladder81capt79 He literally says in the video

@BeatsPatron17 8 ай бұрын

@@cornfedchris58 does it fit without a plate?

@EOTechN9ne Жыл бұрын

The EPS and EPS Carry screw holes line up perfectly with a Delta Point Pro cut. Similar to what you mentioned near the end. All you need is a filler plate. I run a EPS carry on my Sig P320 that was cut for a deltapoint pro. Been running 507k on it for a year before I upgraded. No issues.

@ArduousPun 11 ай бұрын

What plate did you end up going with? I can only find the CHPWS slide plate, and they're out of stock everywhere!

@dillionclayton2152 11 ай бұрын

@@ArduousPunyep, I'm having the same problem. Out of stock.... but if your p320 is like mine, where the rear sight comes off with the slide cover plate. You can get the chps plate with integrated rear sight. Those are in stock but they are like 125 bucks. But that's my only option since the filler plates are NEVER in stock...

@AEtrane 8 ай бұрын

Now this is some news I can use! How much of a gap is there and what did you use to fill it?

@djp279 4 ай бұрын

What company makes these filler plates?

@EOTechN9ne 4 ай бұрын

@@djp279 CHPWS

@Murphy82nd Жыл бұрын

The EPS optics also works out well for Staccatos as they only need an adapter plate and use the existing holes. If you’re going to mount a full-size EPS to a Staccato you will need to source the screws separately as the full-size EPS doesn’t come with the correct screws (407k/507k screws will work, or Calculated Kinetics sells screws that work).

@MiseryDuke69 Жыл бұрын

The EPS is a great step forward for Enclosed pistol dots. I look forward to seeing what other companies can do following in Holosuns footsteps (if they even try that is)

@RealSaltygrease Жыл бұрын

I actually chose to put the full size eps on my 365xl. Without the raised irons and without the backup irons on the optic, you can see the top half of the irons through it. The bigger window is nice, and the overhang lines up with where my holster covers it.

@calangel Жыл бұрын

Ive got one on a 5.74" Mete SFX Pro, and the sight is perfect for a full size gun. Absolutely perfect. It sits on the plastic spacer that comes with the gun. Does not obscure the irons in any way or fashion.

@Lucas12v Жыл бұрын

Why did you need the spacer? I thought the mete could mount k cut optics directly. Am i mistaken? I ask because i was considering an eps full-size for my mete pro as well. I'm currently running a 407c with adapter plate and I'd like to eliminate the plate.

@Tslamable Жыл бұрын

@@Lucas12v the screws go down through the spacer and into the slide but the spacer provides the locating studs

@Lucas12v Жыл бұрын

@@Tslamable makes sense. Thanks

@calangel Жыл бұрын

@@Lucas12v the spacer is for the front and back of the shorter K style sights. There's a second spacer that lets a different footprint with a longer sight front to back mount as well. The spacer is thin polymer, and the iron sights sit well above even the 407K I had in it before. They mill the slide pretty low, so most screws would be too long. With the right screws you can mount it without the spacer, but you'd have like 80 thou of empty space between the front and back of the sight.

@prototype3a Жыл бұрын

FWIW, a 509T wacked onto Glock MOS actually sits VERY low because the plate is quite thin as a result of where the MOS screws are located. The same is NOT true when putting a 509T onto a RMR cut with an adapter.

@protectpersevere2030 Жыл бұрын

Been eyeballing putting an EPS on my mr920 as well and also glad there’s already a cheap shim kit for it.

@kurtismeinhardt68 Жыл бұрын

Got a G45 milled for the EPS, really like it so far. Got them both for a great deal.

@Murphy82nd Жыл бұрын

I have a full-size EPS mounted to both a Walther PDP and a Glock 19 MOS using CHPWS plates. I haven’t had issues with either and I have carried both.

@FL-Kman Жыл бұрын

Hop is like the Datto of the gun world

@Razor-gx2dq Жыл бұрын

Ah a Destiny 2 player, have you completed this week's GM?

@murph9935 2 ай бұрын

rare blue quality glocks

@3oneThrid Жыл бұрын

I love the solar panels, it’s a nice backup providing there’s daylight but also the auto adjustment. But that’s me. Nice vid Hop 🤘🏻

@bunnyoperator Жыл бұрын

100% agreed on everything stated. I'm going to try this as a piggyback alternative also.

@drstevenbrule4406 Жыл бұрын

I just got a EPS full size for my G45 and frikin love it

@SupergiantgeckosLLC 8 ай бұрын

Thanks Hop for the comparisons 👍

@InexorWoW Жыл бұрын

I've got one on my PSA Rock and its great. Its the only full sized gun I'm aware of that has a direct cut for the K series.

@davidfrye7713 5 ай бұрын

Shadow Systems are cut for the K & RMR.

@mavrikmavrik3032 Жыл бұрын

Nice pistol, got to shoot one a while ago and it was the best shooting "glock" pistol I had ever shot. Smooth recoil and slide, very easy to keep on target.

@Dave-wy4so Жыл бұрын

Stellar optics mounting design

@argonzificationd.1531 Жыл бұрын

I'd be very interested in a Primary Arms Version of this with the ACSS reticle. If the 509t was good with it, this should be even better.

@workingguy6666 Жыл бұрын

The choice is: Vulcan ACSS, or optics from the stone-age; I agree.

@awokeone7997 Жыл бұрын

If you dry fire enough, practice on your draw and presenting the gun right, the dot will always be there

@WaterZer0 Жыл бұрын

@@workingguy6666 They need to do the segmented circle on a full size optic. It's just an upgrade.

@argonzificationd.1531 Жыл бұрын

@@awokeone7997 In a life or death situation, you may not always be able to have perfect presentation. The wide circle makes you better prepared for contingencies like awkward shooting positions or even weak hand shooting.

@awokeone7997 Жыл бұрын

@argonzificationd.1531 honestly, if you're in a life and death situation, either one might not help if you don't train or have LEO/Military experience where you have been in shoot outs. Benefits of it, is if you compete in the tactical/sporting shooting games

@juncho1977 Жыл бұрын

When is the ACSS Vulcan version coming out? 😉

@eugenechurch6135 Жыл бұрын

I only like acss Vulcan dots now

@bannedbycommieyoutube5time920 Жыл бұрын

EPS works great on a shadow 2, 1,000 rounds so far (direct mount - Cajun gun works optic cut). I also have two EPS carry optics on shield plus pistols with around 5,000 rounds through them. All have worked flawlessly. Need the adapter plate on the Shield plus pistol but you can still see the top half of your back up iron sights. The only issue I had with the EPS carry is the battery died quickly. I went ahead and replaced it for $10, no issues since and I’ve left it on for months.

@lililililililili8667 Жыл бұрын

I used my last p permit to get a dagger for no reason and the day after palmetto had a dank sale on shadow 2

@bannedbycommieyoutube5time920 Жыл бұрын

@@lililililililili8667 it’s my favorite pistol, immediately. Such a value to at $900 in your hands if you shop around. Plus $150 for the optics cut, cheaper than their optics ready one. It cut my groups in half at 25 yards, easily. I’m spoiled now. Other than some $3000+ guns I’ve shot that friends have that are more temperamental (2011’s), it’s the easiest gun to shoot. I own many handguns and I couldn’t recommend the shadow 2 more.

@tamisthewizard3199 Жыл бұрын

I'm a big fan of the solar panel in combo with a smaller battery I hope they start doing that on other optics

@michaeljnewton Жыл бұрын

I modified my 43x MOS to allow the EPS Carry to direct mount. It’s pretty damn awesome

@brookford1206 Жыл бұрын

Have both the eps and eps carry since they released. Had both slides cut for the k pattern for direct mount goodness. They have been outstanding. Wouldn't consider another pistol RDS at this point.

@michaels5210 Жыл бұрын

I agree. At this point the only RDS I would get over it for a pistol would be the RMR if for some reason I wanted an option that was proven to be bomb proof. That being said…. I haven’t seen anyone do drop tests for the EPS so I can’t say they won’t do well in those too.

@seanoneil277 Жыл бұрын

I've got several Holosun 507 C models, a 507k, and an EPS. The glass clarity and dot crispness on the EPS are much better than the other models. All my 507 sights are side-load battery, not early versions. At this point I think the 507 sights better for secondary sights on scoped carbines, but I'm not going to spend the $$ to swap them all over.

@michaels5210 Жыл бұрын

@@seanoneil277 yea that sounds about normal. Like if you already have other decent Red dot sights it’s not really worth switching em all over. But every pistol red dot I get from now on will be probably the EPS unless I need another dot for any specific reason

@488Magnum Жыл бұрын

I run an EPS on an M&P 2.0 compact. Great edc setup

@gregorysloan3619 Жыл бұрын

The guys at Shadow Systems and Mossberg owe you lunch. In part to your reviews I picked up a Foundation Series MR920 and DR920, both running the EPS 2 MOA, and a MC2SC with the EPS Carry 2 MOA. QVO Tactical has recently released a decent AIWB holster for the MC2SC. Solid 6/10.

@gulkash1188 Жыл бұрын

I am running a 407k on my Arex Delta M, this thought process makes a lot of sense honestly

@DanJLeh Жыл бұрын

I went from an RMR06 to an EPS MRS on my staccato P. Effective window size is better and closed emitter. No complaints.

@shaneciccarelli-palmer2962 Жыл бұрын

Glock 45, slide was cut for EXPS Carry. ≈300rds with it, ≈50 while using Nods. The four NV settings are different enough to work in most conditions ie outsode low light, to inside with a surefire X300V illuminator

@GldenRetriever Жыл бұрын

Since the EPS shares the same front boss and screw pattern of the DPP, it can be easily mounted to anything with a DPP cut (and if it has the rear post(s), you can just cut it down like the G43x/48). It can direct fit to the FN509 pattern, but the suppressor height sights make it not really worth doing. Especially with the SCS-320 coming out supposedly in the next couple weeks (according to a holosun employee).

@injuredoutdoorsman9011 Жыл бұрын

The Mossberg 940 is cut for a RMSC/Holosun k and would pair perfectly with an EPS

@calholli Жыл бұрын

The 509T doesn't need an adapter plate if you just get a dedicated slide; which makes it bomb proof also. I have one and it's great. I have a 508T also on a G35 RMR cut.. but if I get another one --- it will definitely be the 509T again, with another dedicated slide. I love it. (if not the EPS; I'm sold on it too).

@shroey20 7 ай бұрын

I just sent my Glock slide to Wager for a 509T cut. I can't wait to see how it turned out.

@calholli 7 ай бұрын

@@shroey20 I think it's the best duty setup out there now. No small screws stripping out or coming loose.

@TheMsdos25 Жыл бұрын

All this time I thought the full size EPS was a direct RMR mount. Edit: Sig has moved the optics cut farther forward on the 365x and XL models now, allowing the rear sight to stay in place. They also have suppressor heigh sights available, but only with the craptacular RomeoZero Elite pre-installed.

@tylerrodriguez9233 Жыл бұрын

I have a PDP Pro SD and the Walther specific Holosun SCS coming in this week. Should be awesome!

@Quality_Guru Жыл бұрын

It's worth noting that S&W latest pistol, the M&P 5.7, has an optic ready slide that will direct connect to the Holosun K or EPS series red dots. The irony is that they don't provide the correct screws for the Holosun optics. Looks like Holosun is becoming the most popular red dot option considering their value proposition of delivering performance over price.

@Akaban_94 Жыл бұрын

Same case with the PSA Rock 5.7. But the screws that came with my EPS carry worked for direct mounting it.

@lon242 Жыл бұрын

The Canik Mete SFT/SFX are full size pistols with micro footprints. The EPS looks good on them.

@shooteveryday1841 Жыл бұрын

This video is very information dense. Nice work

@jakethemistake19 Жыл бұрын

Got this on my G26, love it

@BigBigBigJeff Жыл бұрын

Love how I watch these videos with great interest knowing I will never see or use a gun let alone a pistol optic xd

@The_kookclub Жыл бұрын

Dude this is wild. Just got MY Mr920 k-cut

@dtfrankel79 2 ай бұрын

I have an EPS full on my PDP Pro Compact & ABSOLUTELY LOVE IT!!! I got the 6 MOA green dot due to my astigmatism & its worked out PERFECTLY.

@brazzy1467 Жыл бұрын

I just had a Holosun EPS carry put on my Glock 43x MOS because it was at my FFL gun store. I'm gonna put it through a reliability test this weekend. I put 3 to 5 hundred rounds through my conceal carry handguns before I start to carry it. I figure if something is gonna 💩 the bed it'll be at the range. Better there than a real situation.

@xXSpeedyTacoXx Жыл бұрын

Love me EPS so far 😀

@InfernoPhilM Жыл бұрын

I love Holosun optics.

@uilim60 Жыл бұрын

the PSA Rock 5.7 direct mounts the Holosun K sights. I have a EPS Carry installed on mine.

@shidandfard9976 Жыл бұрын

the SW mp57 uses the same footprint if I remember right, it's got a full size slide and a g19 esque frame

@Russianmafia10 Жыл бұрын

They have full size pistols with this pattern, it's the same pattern for the shield RMS series optics. May just need slight modification on the lugs

@SpenserHartman Жыл бұрын

Glock 19 slide is the same width as eps carry. I had jagerwerks cut my oem slide. I love the combo.

@EpsteinNooseSolutions781 Жыл бұрын

Review the C&H precision duty red dot. It looks like an ACRO and uses the ACRO footprint but has the reticle options and shake awake of a Holosun for like $320 or something.

@Libertarian_Neighbor Жыл бұрын

I use the full size EPS on a Glock 48. I like the extra window size on a carry gun.

@CorkScrewDood Жыл бұрын

Its been on my G3 Taurus for a long ass time, partly because my Glock 45 came with a zev slide, but partly because it goes hard on it

@CorkScrewDood 8 ай бұрын

Nevermind, Staccato stole it

@searchBLOC941 Жыл бұрын

The Sig X Full has a footprint from the factory that fits a "K" cut without a plate.

@JeremyRyanFit Ай бұрын

Great comparison!

@billstevens5277 Жыл бұрын

Nice, I have an MR920. But I also have a P365, which is more suited for carry. It should fit on that, right?

@stevedo18able Жыл бұрын

Sold all my 509T's for the EPS series. MY CZ's that were milled for rmr footprint and lost the rear irons gets the carry model for the notches. The adapter plate for the 509 is only a bit more than 1oz but feels like a brick when you hold it side by side to an EPS. EPS comes with RMR to RMRcc adapter plate and cowitnesses with suppressor height sights (same height as a 507c when used with the plate). The EPS carry model DOES NOT come with RMR to RMRcc plate and comes with only a RMRCC plate.

@Taylorc52 Жыл бұрын

I like the circle dots. It’s a bigger target on these tiny windows.

@CatholicKit Жыл бұрын

Just crank the brightness till it looks big like a chad

@DanDannyDanielleBob Жыл бұрын

Watching a giraffe run is the part of the nature documentary where my brain goes quiet and my eyes barely believe nature made it somehow work.

@jk3jk35 Жыл бұрын

I don't own a gun but I just wanted to comment and say I'm glad I found your channel(s) twice - first for Mechwarrior and again for gun stuff

@onpsxmember Жыл бұрын

I like the circle dot and always like when I can have a circle by itself as well. Maybe that comes from being used to the AUG donut.

@MrConceito Жыл бұрын

I’m just bad with finding the dot because I suck, so the murder circle helps

@lililililililili8667 Жыл бұрын

EPS carry is great none of the other enclosed options seem as nice. My 507 comp just came and I'm going to put it on my p365 baby edition just to be a silly goose with an optic that is almost 2x wider than the slide.

@DevonReclaimed Жыл бұрын

Just ordered a EPS carry Green 6moa from optics planet during their red dot sale. 12% off and free shipping. This will be my first pistol dot and it's going on my daily driver SIG P365XL Spectre Comp

@GBGuns Жыл бұрын

I'm curious why you think solar powered is bullshit. Because I only use red dots for range toys, not carry I haven't seen a drawback to solar, in fact even Oregon's sometimes not-so-bright daylight I've run one of those solar optics without a battery in it at all.

@calvins4084 Жыл бұрын

I love the clarity of the eps...theres no fish eye compared to the RMR/507

@SolidSnake_1776 Жыл бұрын

Gotta love shadow Systems!

@KrishnaMusicc Жыл бұрын

It just makes me happy seeing other lefties shooting. There's like...6 of us total in the world LOL. Also I've dropped my EPS carry mounted on a 365 XL on driveaway asphalt once with no issues besides the paint slightly chipping on the holosun logo from the top, for anyone wondering about the durability.

@bannedbycommieyoutube5time920 Жыл бұрын

Left handed people are an absolute abomination 😁

@stevesweeney7892 5 ай бұрын

Thank you you answered all my quickly!

@Blankford777 10 ай бұрын

"I'm not at the point where I would run out and get my Glock 19 slide milled for the Holosun K, just so I could use an EPS" Haha, I just bought a stripped Glock 19 slide and sent it to Wager Machine for exactly this purpose.

@andrewcowie6436 11 ай бұрын

Thank you for the video! MY MAN! :)

@jonn8163 Жыл бұрын

I got brave and had my Archon Type b cut for the ESP carry

@TheMsdos25 Жыл бұрын

Looked at the full size in the shop recently. Saw a ton of distortion with the ring reticle in the upper 1/3 of the glass, to the point id probbaly switch to dot only. That being said the auto-brigthness was actually perfectly usable under artificial light, unlike my 507c that becomes unusably dim.

@PinkShirtTactical 11 ай бұрын

The ring distortion is common in the EPS line due to emitter placement in the housing and the glass angle...just use the 2moa dot

@TheMsdos25 11 ай бұрын

@@PinkShirtTactical Damnit, I paid for the whole reticle, I wanna use the whole reticle. Jokes aside, the Carry model doesn't appear to distort quite as badly due to the smaller window. Did have a defunctive accelerometer in my first unit though.

@justins2407 Жыл бұрын

Just swapped my 507k out with the EPS on xmacro I carry everywhere and couldn’t be happier with the change. Sure I have some overhang of the optic on either side of the gun due to the larger optic but I honestly couldn’t care less. Larger window, closed emitter so it checked all the boxes on what I didn’t care for on the 507k. Great optic so far, time will determine if my opinion changes.

@freedomfalcon 11 ай бұрын

Did you have to get a different mounting plate from the 507k or did the screws line up?

@justins2407 11 ай бұрын

No plate, they both work on the 507k footprint.

@BrandensOutdoorChannel Жыл бұрын

I got my EPS and EPS Carry in Oct 2022. Just been too busy to make videos on them.

@calholli Жыл бұрын

Pretty sure Canik's first dot ready tp9 was the RMS too. I could be remembering wrong. Maybe it was proprietary. I remember it NOT being the RMR though.

@taprackmiss4613 Жыл бұрын

I got the full size by accident, it fits decently on my Canik elite sc because the slide is a bit thick and has the rms shield cut.

@twoonisx Жыл бұрын

How has you Shadow Systems pistol been holding up? have you been using it a lot?

@Draggoon12 Жыл бұрын

The Girsan MC P35 Ops Optic has a RMSc/K optics cut

@S1deshowRob Жыл бұрын

Pretty sure the factory cut on the canik mete pistols is for the holosun K footprint because the canik optic uses the same footprint so the EPS should work on those. They’re also awesome pistols I recommend anyone try out

@MrCarCrazy Жыл бұрын

Yep, have an EPS carry on my mete MC9

@michaelbernier7703 Жыл бұрын

Yes I have the EPS mounted on my Canik Mete SFX and I love it.

@S1deshowRob Жыл бұрын

@@michaelbernier7703 nice, I wanna get the 6MOA version for my rival

@oskar6661 Жыл бұрын

The Canik Mete series is all small-footprint optics ready - even the larger versions.

@jaimemiranda2131 11 ай бұрын

So I run an MR920 & have been looking at both the EPS & EPS carry. I guess what I’m looking to ask is which of the 2 has a more flush/natural-looking fitment onto my particular model as far as width is concerned? I prefer to not have my optic hanging over the sides of my slide, simply because of run into hang up issues in the past. Any & all recommendations, advice, and opinions greatly appreciated.

@jakezone1 6 ай бұрын

well pretty good for you and lots of nice shooting footage. But the solar panel feature is pretty nice. I have it set for very low for indoor use and when I go outside to the range I've never had to change it. It is exactly where it needs to be brightness level when I go outside so I think it's a great feature.

@lucasblanchard47 Жыл бұрын

So which size dot on the EPS Carry would make the most sense for a micro compact carry pistol? 2 or 6 MOA? Always enjoy your content, much love from Texas.

@ronnguyen8287 10 ай бұрын

6 moa. Tried the 2. Both the 2 Noa dot and window are too small