Hot Foil Stamping Leather with the WT-90AS Hot Foil Machine.

Рет қаралды 92,340

Күн бұрын

In this video I show the use of the WT-90AS Hot Foil Stamping machine on leather. This versatile machine is ideal for the serious leatherworker who wants to increase their revenue by personalising their projects for sale and maximise profits.
𝐐𝐔𝐈𝐂𝐊 𝐋𝐈𝐍𝐊𝐒:
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Hot Foil Stamping Machine.
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐊) 𝐋𝐢𝐧𝐤: amzn.to/2CI1yfB
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐔𝐒𝐀) 𝐋𝐢𝐧𝐤: amzn.to/3xyFzze
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐂𝐚𝐧𝐚𝐝𝐚) 𝐋𝐢𝐧𝐤: amzn.to/34nfh73
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐆𝐞𝐫𝐦𝐚𝐧𝐲) 𝐋𝐢𝐧𝐤: amzn.to/3aFBxtM
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐀𝐮𝐬𝐭𝐫𝐚𝐥𝐢𝐚) 𝐋𝐢𝐧𝐤: amzn.to/3iZgfuc
🌏 𝐀𝐦𝐚𝐳𝐨𝐧 (𝐉𝐚𝐩𝐚𝐧) 𝐋𝐢𝐧𝐤: amzn.to/2Qa8GV4
Also Available (If not in stock on Amazon) from here:
🌏 𝐀𝐥𝐢𝐄𝐱𝐩𝐫𝐞𝐬𝐬 𝐋𝐢𝐧𝐤: ali.ski/amO-Z
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Letter Stamp Set & Holders.
🌏 𝐀𝐥𝐢𝐄𝐱𝐩𝐫𝐞𝐬𝐬 𝐋𝐢𝐧𝐤: ali.ski/CiWshB
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Custom Made Logo Dies (Makers' Mark).
🌏 𝐀𝐥𝐢𝐄𝐱𝐩𝐫𝐞𝐬𝐬 𝐋𝐢𝐧𝐤: ali.ski/X_5jb
𝐏𝐑𝐎𝐃𝐔𝐂𝐓: Foils.
🌏 𝐋𝐢𝐧𝐤: geordiesworkshop.com/product-...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
If you'd like to check out our website, where you’ll find loads more content, head over to:
🌏 geordiesworkshop.com
✅ 𝐋𝐈𝐍𝐊𝐒:
All of the tools and other materials used in this video are listed with links to where you can obtain them in your own country on the page devoted to this video, which you can see here:
🌏 geordiesworkshop.com/31-hot-f...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
❤️❤️❤️ 𝐏𝐋𝐄𝐀𝐒𝐄 𝐁𝐄𝐂𝐎𝐌𝐄 𝐀 𝐏𝐀𝐓𝗥𝐎𝐍 𝐀𝐍𝐃 𝐇𝐄𝐋𝐏 𝐒𝐔𝐏𝐏𝐎𝗥𝐓 𝐓𝐇𝐄 𝐂𝐇𝐀𝐍𝐍𝐄𝐋: ❤️❤️❤️
If you like my videos and you’d like to help support my channel, allowing me to continue to create regular content please consider becoming a Patron. For more information, please visit my brand new Patreon page:
/ geordiesworkshop
As a patron you get lots of extra benefits, including:
✅ You can watch Geordie's videos - Without those annoying Adverts!
✅ You get access to additional ‘Patron-Only’ videos.
✅ You get listed as a Patron in the end credits on every new video.
✅ You’ll be eligible for Give-a-ways of reviewed tools.
✅ You'll get early access to videos before they go on KZfaq.
✅ You'll get Free access to past and future plans, patterns etc.
✅ You can access Geordie's community and ask me questions.
✅ You'll qualify for 5% off all our 'Geordie Tools' brand of products.
✅ You'll get behind-the-scenes videos, blooper reels and extra footage.
✅ You'll get a chance to suggest ideas for videos.
A big 𝐓𝐇𝐀𝐍𝐊 𝐘𝐎𝐔! in advance.
Geordie.
*Benefits differ, depending on the pledge tier you select.
𝐎𝗥, if you would just like to buy me a coffee or make a one-off donation, please use the PayPal link below:
🌏 www.paypal.me/GeordieLeatherUK

Пікірлер: 502

@LMPhotoProductions 3 жыл бұрын

Wonderful work for this tutorial! So glad of this sharing of knowledge! Really useful, thank you, Geordie! God bless!

@HobbyBloxs 3 жыл бұрын

Glad you enjoyed it!

@benjaminnoonan3783 3 жыл бұрын

@@HobbyBloxs you got my subscription

@akameus 3 жыл бұрын

You can never buy these shared best practices on any online leather crafting courses. These best practices were totally based on the artisan's experience, cannot be found on any fundamentals. Much appreciated Geordie! 🙏

@HobbyBloxs 3 жыл бұрын

Thank you for your kind words. I appreciate it.

@bimatvug 2 жыл бұрын

This guy reminds me of Rowan Atkinson, his expressions, his tonation, everything but yet again, he sure is a good teacher, such amazing content and sharing. Wonderful work.

@HobbyBloxs 2 жыл бұрын

Hello Bima TV. Yes, I've been called Mr Bean by many viewers. I just wish I had his income. Thank you for your kind comments. It means a lot!

@giannienunez8780 3 жыл бұрын

Thank you for this amazing tutorial! You've helped me make the decision of actually buying one. You've made it seem so simple and have given some great tips. I can't wait to start playing with mine!

@HobbyBloxs 3 жыл бұрын

Glad I could help!

@CaveLeatherCo 3 жыл бұрын

Thank you!! I was looking all over the place for a demonstration of a good way to align the letters consistently. Your template trick is brilliant! I’ll have to get my hands on some of that mounting board

@HobbyBloxs 3 жыл бұрын

I'm pleased you found it useful.

@juliecook9532 3 жыл бұрын

I am so glad you showed an updated video from a British supplier - that's what I'm going for. You saved me a lot of headaches Geordie! Thank you.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@grannyjclay-joannieholdhus925 3 жыл бұрын

Geordie, you are a wonderful, patient, thorough teacher - thank you! So helpful! I am thankful I found your channel! God bless you, Geordie!

@HobbyBloxs 3 жыл бұрын

Many thanks for your kind words. I do what I do and if people find it useful, it make me happy.

@grannyjclay-joannieholdhus925 3 жыл бұрын

@@HobbyBloxs ❤️

@witchblade015 Жыл бұрын

Thank you for this tutorial. I have watched so many on this machine and not gotten the information out of them for the questions I had about it. Your videos are so informative, by not speaking on it with the machine next to you. You can see you truly want to inform other through demonstrations with a working machine while you’re explaining your own experiences, your own trial’s & error’s to help educate others to test for themselves. I have now subscribed so I can watch more of your videos to learn from your experience. I also have Lupus so my hands go through cycles of not working so well. So your video messages and honesty helps to keep my spirit up that it can be done if you just make a process that works for yourself. Thank you again 😊

@HobbyBloxs Жыл бұрын

Hello. Thank you for your kind words. I'm pleased you found the video helpful and that it answered your questions. I had to look up Lupus, as I hadn't heard of it. That sounds like a challenging condition and I can see how this would affect your hands. Best of luck and keep making the effort - It's better to keep going with your hobbies than to give in to your condition. Geordie.

@magnoliasonsilk3090 3 жыл бұрын

I was thinking of buying a basic hot foil stamping machine and came across your video while looking for recommendations on youtube. This was so helpful. Especially the last part about the stamping templates. Thank you so much!!!

@HobbyBloxs 3 жыл бұрын

You are so welcome!

@wizgha1987 3 жыл бұрын

Thanks so much for this. It helped me immensely to get started with mine! Some additional tips for those getting started: - Ask whoever you're buying your brass set from to drill a threaded M4 (4mm) hole in the centre of the T-slot holder that comes with any new lettering set - Also make sure you have a threaded M4 bar / rod that's 3-4cm long to fix the T-slot holder in place on the machine, as shown in the video. Most I found on eBay were 5cm long and I had to cut off the excess with a hacksaw. An M4 rod (4mm wide) fits perfectly in the U-slot that the machine has in the heating plate. I think an M5 would fit as well, but probably quite snugly. Don't forget to buy a washer and a wing nut to tighten too!

@HobbyBloxs 3 жыл бұрын

Good advice. Thanks for sharing.

@patricialiani9815 3 жыл бұрын

Thank you so much for this tutorial! It helped me so much + I love your personality, you are so calm and a great teacher :)

@HobbyBloxs 3 жыл бұрын

You are so welcome!

@onlyeyeno 3 жыл бұрын

Thank You for taking the time and effort of making and sharing Your knowledge this way. It is in my opinion creators like You (and equally generous souls) that makes KZfaq worth while. Best regards.

@HobbyBloxs 3 жыл бұрын

I appreciate that!

@born2dance21986 2 жыл бұрын

Such a great tutorial. Thank you for taking the time to offer so much detail. I'm new to leatherwork and this information was so very helpful. I can't wait to watch more of your videos!

@HobbyBloxs 2 жыл бұрын

Thanks. I'm pleased you found it useful.

@parkourboyswales 3 жыл бұрын

Beautiful work Geordie, you've got yourself another subscriber to say the least! I can't wait to get started with leather craft and you are the first channel I've found that actually explains every step and makes me feel confident in wanting to try it out

@HobbyBloxs 3 жыл бұрын

Welcome aboard!

@Sod3k 3 жыл бұрын

You made an extraordinary tutorial Georgie. Thank you.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@rubencarrera2225 2 жыл бұрын

Thanks Geordie for the video advice . Your videos on how to use the hot foil stamp made it easy and simple to understand..👍👍👍👍👍👍

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@prakashp3070 3 жыл бұрын

Sir, thank you for this. (And for all your other videos.) You really are a superb teacher.

@HobbyBloxs 3 жыл бұрын

You are very welcome

@delilahdarden473 3 жыл бұрын

I loved the explanations, warnings, what not to do... Very helpful and patient explanations.

@HobbyBloxs 3 жыл бұрын

Thank you for your kind words.

@dozerman53111 3 жыл бұрын

Excellent video. Very good demonstration of foil machine. Glad to see you back on KZfaq

@HobbyBloxs 3 жыл бұрын

More to come!

@robertsimmons6945 3 жыл бұрын

Hi Geordie Nice to see someone talking about there skills and there illnesses, you are great at explaining the tips of your craft, I myself have to self isolate as iam CEV and your videos on leather craft along with the clear tuition keep me on the go. Thanks and keep it up.

@HobbyBloxs 3 жыл бұрын

Hello. Thanks for the positive comment. I too am shielding, so I know where you are coming from. Take care and stay safe and hopefully the long-awaited vaccine will bring us all to the end to this awful situation.

@lenag9120 2 жыл бұрын

Your patent to align the letters is genius! The company should pay you for that. Amazing and super helpful video. Thank you

@HobbyBloxs Жыл бұрын

Thank you for your comment on Geordie's KZfaq channel. Geordie has been away dealing with some health problems but is returning to KZfaq very soon with a brand new series of videos. We are clearing out his overflowing inbox in readiness for his return. If you want to re-ask any questions or re-submit your comment, please do so and Geordie will answer you personally. There is no need to reply to this automated message.

@maritessoliva4047 3 жыл бұрын

Such an informative tutorial. Enjoyed watching it and great tips as well. Thank you so much for creating and sharing with us Geordie!!

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@arisegelitz 3 жыл бұрын

This is so helpful, thank you so much. You explain everything so well, now I actually have the courage to buy one and play around with it. :)

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@normainelegaspi9686 2 жыл бұрын

id like to thank you for this wonderful idea! i almost gave up with stamping but when i saw this video it really helped me a lot. Now i got a wide range of sliding boards for all my patterns. stamping made soo easy!! Thanks to you 🥰

@HobbyBloxs Жыл бұрын

@viscountbiscuit5343 3 жыл бұрын

Really enjoyed this video. You're brilliant at explaining things. Your presenting skills are fantastic, it felt like you are giving a one to one lesson. Thanks very much for sharing your skills and knowledge. 👍🏻

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@vanita1838 3 жыл бұрын

Thank you so much for posting this. I really enjoyed watching. You shared a ton of useful tips that I will definitely be making note of. Hope you've been well during this pandemic, much love from Canada!!

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@mxrclxst Жыл бұрын

Thanks for that in-depth function and usage breakdown

@HobbyBloxs Жыл бұрын

Hi Marc. I'm pleased you found it helpful.

@Suz-anne Жыл бұрын

What a terrific video! I so love your style of presenting. I came here from another video that deals with a hot foil press and I highly appreciate your in-depth explanations. A huge Thank You!

@HobbyBloxs Жыл бұрын

@Munchkineric 3 жыл бұрын

Just stumbled on your page as I was looking for reviews and demos on heat presses for leather. I love the video and the review! Very helpful and informative as well as a few tips I hadn't thought of. Thank you and I look forward to watching more videos!

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@memakattak 2 жыл бұрын

This is such a great video. Beautiful explanations, I was finally able to level my machine out after hours and hours of wasted time trying. Thank you for making this for everyone to see.

@HobbyBloxs 2 жыл бұрын

Hello Siamak. I'm pleased you found my video useful. All the best for 2022.

@maside7165 2 жыл бұрын

Thank you very much for the time and effort to explain the machine and share your tricks. I really enjoyed the way you did it. Much love

@HobbyBloxs Жыл бұрын

@lowspeak 2 жыл бұрын

Thank you for this video! I finally know how to level the plate now. It's still not 100% level but I'm working on it.

@HobbyBloxs 2 жыл бұрын

Glad I could help!

@mandab9740 3 жыл бұрын

Amazing video! SO informative! Thank you for sharing your knowledge

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@darinakalinova2180 2 жыл бұрын

This was one of the best videos I have watched in really long time and I do watch a lot of them. Thank you very much. Except the fact you can explain well. Your personality us amazing.

@HobbyBloxs Жыл бұрын

@rhonareed3217 2 жыл бұрын

You are an incredible help! Thank you so much for your time spent on this video and for showing an inexpensive machine and such invaluable tips on how to line the things up. I will be having dog collars made by my leathersmith but would love to finish them with embossing - with your template tip, I may give it a go, as the collars do lie flat. Thank you!

@HobbyBloxs 2 жыл бұрын

You're very welcome!

@stephanweichers3077 Жыл бұрын

Very helpful and friendly session! Thank you so much Geordie!

@HobbyBloxs Жыл бұрын

Glad you enjoyed it!

@garybarnes3998 2 жыл бұрын

So glad I found this video! Thank you for sharing your jig making process, I bought the stamping machine but had a difficult time lining up the text. I will now be able make a jig using your technique. Thanks again Sir, also subscribing to your channel.

@HobbyBloxs 2 жыл бұрын

Hi Drovers & Gents. Thanks for your feedback. I'm please you found my jig idea beneficial. Good luck with your stamping machine!

@captainscott4891 3 жыл бұрын

Thanks for taking the time to do such a detailed tutorial, it's taught me a lot! I've liked and subscribed!

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@CaptureMyDrift 3 жыл бұрын

Brilliant, well put together video with excellent advice that can only be gained by experience. I really appreciate you taking the time and effort to share your knowledge with us! I've only recently come across your channel while I was looking at how an arbor press can be used in leather work and what a surprise I got when I found you, so many helpful ideas! I'm now looking into getting a Hot Foil Machine and value the information that you have shared with us here, it will be so helpful. Thank you so, so much. I wish you well, Thea

@HobbyBloxs 3 жыл бұрын

Thank you for your kind words. I appreciate you taking the time to leave such a detailed comment.

@rastaricky9584 2 жыл бұрын

Thank you, thank you, thank. I have exactly the same machine and I have struggled and dreaded the stamping process…hardest time getting things lined up. Your jig idea is absolutely genius! Two thumbs up 👍🏾. And a new subscriber. Thank you 🙏🏾

@HobbyBloxs 2 жыл бұрын

You are so welcome!

@littleoven 2 жыл бұрын

Brilliant video! Very helpful. Thank you! 🥰

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@Tally13 3 жыл бұрын

I don't recall if I have commented here before - but I wanted to say THANK YOU - I genuinely appreciate this video. Very helpful.

@HobbyBloxs 3 жыл бұрын

You are so welcome!

@r.j.k.7925 2 жыл бұрын

Aww you seem such a nice chap and at the same time a comedy king - haha laughed my a** off when you were talking about the Chinese temperature accuracy 😂😂. Thanks for the super helpful 40 minutes!!

@HobbyBloxs 2 жыл бұрын

Glad you enjoyed

@davidatipple2692 3 жыл бұрын

Havent got a press yet, so was looking through KZfaq and came across this, First class tutorial, some first class tips like ....ensuring that you get sets from the same manufacture, the gigs i like. i can see i have saved money already my not making mistakes that i most defiantly would have.

@HobbyBloxs 3 жыл бұрын

Glad it helped!

@SP-fy4fx 3 жыл бұрын

Another great video. Very detailed with lots of great tips. Thanks for making.

@HobbyBloxs 3 жыл бұрын

Thanks for watching!

@Itsmarieanne 3 жыл бұрын

Thank you so much for filming this ♥️ I subscribed

@HobbyBloxs 3 жыл бұрын

Thanks for subbing!

@josephjames4302 2 жыл бұрын

Aloha from Hawaii! Really appreciate this video. I just purchased a similar machine(same company), and the instruction manual was lacking in thorough instruction. Your tutorial brought me up to speed. Loved the positioning jig too. Mahalo and God Bless You and Yours.

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@ewaz.sleziona2309 3 жыл бұрын

Thank you so much for your tutorial. It helped me a lot ❤

@HobbyBloxs 3 жыл бұрын

You're welcome 😊

@thuurowitz 3 жыл бұрын

Excellent video, didn't even need the letter part but watched it anyway. Thank you very much and good luck.

@HobbyBloxs 3 жыл бұрын

Glad it helped!

@bobbiejohnson7746 3 жыл бұрын

This was very helpful! I've been struggling with lining up my designs...Geordie! God bless!

@HobbyBloxs 3 жыл бұрын

You are so welcome!

@Azzegrello 3 жыл бұрын

. this is a hi from me from Tripoli, Libya thanks a TON for all the precise information that you gave us, here i am watching your video before i buy the machine. thank you very much you good man.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@nicolassalas6591 3 жыл бұрын

Love the video Geordie, watching it from Chile! I wish you happiness and health

@HobbyBloxs 3 жыл бұрын

Thank you.

@aksay76 2 жыл бұрын

Great idea for the jig! I just purchased the same machine and was figuring out how to make a jig for pencils. Yours is brilliant 😊

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@sleepontheclouds Жыл бұрын

Thank you so much for sharing. Amazingly helpful information and knowledge!

@HobbyBloxs Жыл бұрын

@Coppae 3 жыл бұрын

Wonderful tutorials! Really enjoy them :)

@HobbyBloxs 3 жыл бұрын

Glad you like them!

@sandricabello2608 Жыл бұрын

Great tutorial, Thank you so much...

@HobbyBloxs Жыл бұрын

Glad you enjoyed it!

@hasnainchangi3457 Жыл бұрын

Thank you. That was so informative. God bless you sir

@HobbyBloxs Жыл бұрын

You are very welcome

@TheCigarHolder Жыл бұрын

Great video! Thank you

@HobbyBloxs Жыл бұрын

Glad you liked it!

@czarmainedatiles6282 3 жыл бұрын

Geordie thank you so much! You are brilliant! You've explained it very well! I just ordered mine from Aliexpress and I'm quite intimidated by it. But thanks to you! More power and hope to see more videos from you 👏👏👏

@HobbyBloxs 3 жыл бұрын

You are so welcome!

@dmack1827 3 жыл бұрын

Great content and I love the organization of your shop.

@HobbyBloxs 3 жыл бұрын

Glad you enjoy it!

@stockholmgrapher 2 жыл бұрын

Got one of these yesterday. For 150€ they rock. 🔥

@HobbyBloxs 2 жыл бұрын

Have fun!

@DonHolloway Жыл бұрын

Wonderful job! As soon as I saw the air quotes on "temperature" I realized I had been taking the wrong approach. I also like your use of a small square to align the die. The little sled is brilliant. The only tweak I will make is to use leather as the template material to hold the work.

@HobbyBloxs Жыл бұрын

@alexandrelangle4928 2 жыл бұрын

Really great video, it helped to make up my mind. Thank you for your clear explanations Geordie, cheers from Norway!

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@dawgyv72 3 жыл бұрын

Awesome timing! I literally just got this machine in the mail today!

@HobbyBloxs 3 жыл бұрын

Have fun!

@daveblue4303 3 жыл бұрын

are you still using this machine and how good is it? iv just ordered one so I'm hoping it will last a while.

@dawgyv72 3 жыл бұрын

@@daveblue4303 It gets the job done. Its imprecise but once you figure out your specific settings, you'll be fine

@daveblue4303 3 жыл бұрын

@@dawgyv72 ok cool, thanks for your quick reply 👍🏼

@suebates5267 2 жыл бұрын

Very thorough. Thankyou

@HobbyBloxs 2 жыл бұрын

Glad it was helpful!

@mytube7473 3 жыл бұрын

Brilliant. Answered everything i wanted to know and more.Thank you.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@mytube7473 3 жыл бұрын

@@HobbyBloxs may i ask, do you recommend embossing BEFORE or AFTER applying conditioners like fiebing's 'Aussie leather conditioner' or 'resolene'? Thanks again.

@HobbyBloxs 3 жыл бұрын

I always emboss before. The finish will then get into the folds of the emboss and create nice shadows in the piece.

@louispolo2277 2 жыл бұрын

You are the best!! Thank you

@HobbyBloxs Жыл бұрын

@dianatan6391 3 жыл бұрын

Very good video and explanation was cleared. Thanks for sharing.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@capesidesewing Жыл бұрын

Absolutely amazing tutorial. Thank you for your time, knowledge and kind heart for sharing with us all. Misty, Capeside Sewing LLC

@HobbyBloxs Жыл бұрын

You are so welcome!

@clarehallammcshea987 2 жыл бұрын

Excellent video very easy to understand and informative thank you 😊

@HobbyBloxs Жыл бұрын

@RayClarke72 3 жыл бұрын

Wonderful video Mr Geordie Leather. Many thanks for sharing this. Love the mounting board Jig. Best wishes Sir!

@HobbyBloxs 3 жыл бұрын

Thank you! Cheers!

@AshleyDawnD 2 жыл бұрын

This is such a wonderful video, so many good tips and tricks for the use of this machine. Thank you for taking the time to film this and include your template, that was so helpful! I'll definitely be buying one of these. Your demeanor is also lovely, it really felt like learning from a friend! New subscriber here :)

@HobbyBloxs 2 жыл бұрын

Thank you for your very kind words. It is comments like yours that keep me going.

@stephenstone2606 3 жыл бұрын

great video have been watching all of them to get more experience as only just started crafting with leather keep up the good work

@HobbyBloxs 3 жыл бұрын

Glad you like them!

@annacottonb 3 жыл бұрын

Fantastic video x thank you x

@HobbyBloxs 3 жыл бұрын

Glad you enjoyed it

@phpablo64 3 жыл бұрын

wonderful work, thanks for sharing.

@HobbyBloxs 3 жыл бұрын

Thank you! Cheers!

@kathyokelley9916 2 жыл бұрын

Amazing. So innovative!!

@HobbyBloxs 2 жыл бұрын

Glad you think so!

@Sherazdk 2 жыл бұрын

Very professional great Video, beautifully described 👍😊

@HobbyBloxs 2 жыл бұрын

Glad you liked it!

@dailydadding4583 2 жыл бұрын

Great video. I have been thinking about this machine for a while and this told me all the bits I wanted to know and a few tips I didn't think of. God Bless!

@HobbyBloxs Жыл бұрын

@jacobfehr5863 2 жыл бұрын

Thank you! It’s like watching a tutorial from a character in a Mike Leigh film! I mean that in the best way possible!

@HobbyBloxs Жыл бұрын

@vickicade8380 2 жыл бұрын

Great video. Exactly what I needed and I love the idea of the template.

@HobbyBloxs Жыл бұрын

@emreduru1833 Жыл бұрын

Thank you so much, i was really very helpful. i have the same machine and helped me out a lot

@HobbyBloxs Жыл бұрын

Glad it helped!

@SimonNgYH 3 жыл бұрын

Thank you, Geordie, for sharing this video, I have been considering a similar machine, which is extremely useful for beginners leather crafters like myself.

@Surya_gaming732 3 жыл бұрын

Sir, I am hot stamping foil machine Operater.

@HobbyBloxs 3 жыл бұрын

Glad it was helpful!

@darrenjameswalker9843 3 жыл бұрын

Very very very very informative very I can't stop saying very informative 🙂👍👍👏👏👏👏🤗

@HobbyBloxs 3 жыл бұрын

Glad you liked it

@edwardllorens 2 жыл бұрын

Excellent tips sir. Love your jigs. Can’t wait to design my own.

@HobbyBloxs Жыл бұрын

@maenabumishref5736 3 жыл бұрын

Wowww You’re amazing thank you so much You helped me

@HobbyBloxs 3 жыл бұрын

You’re welcome 😊

@Daniel5.14 2 жыл бұрын

Thank you so very much for this video!

@HobbyBloxs Жыл бұрын

@fredbrown8022 3 жыл бұрын

Good show Thanks

@HobbyBloxs 3 жыл бұрын

Glad you enjoyed it

@mmorales4395 Жыл бұрын

Very informative video, thanks for all the tips.

@HobbyBloxs Жыл бұрын

@earthangel8875 2 жыл бұрын

Great ideas with the template. I recently bought a heat imprinting machine, not this particular model but none the less, I appreciate your video. Angel from The Bay (USA, Sunny California, Bay Area)

@HobbyBloxs Жыл бұрын

@zonesun_technology 2 жыл бұрын

Thank you for your recognition of our brand.😁😘

@HobbyBloxs Жыл бұрын

@travellingplaces3692 3 жыл бұрын

Great tutorial! I pull them all out and spell it first, then put them in backward so I don’t miss any letters. It also “guarantees” I have the letters right side up (thicker part at the bottom) as you explained.

@HobbyBloxs 3 жыл бұрын

Great tip!

@chillgirlshousetrap 2 жыл бұрын

Amazing video .

@HobbyBloxs 2 жыл бұрын

Thank you!

@steveneinfeldt4051 3 жыл бұрын

awesome video

@HobbyBloxs 3 жыл бұрын

Thanks for the visit

@btrbrianthomasrobson514 3 жыл бұрын

Great stuff...

@HobbyBloxs 3 жыл бұрын

Welcome Brian! I'm looking forward to seeing your new channel filled with great content!

@LITTLEsquirrelz 2 жыл бұрын

Thank you so much for your video!! 🌟🌟🌟 Very best & well organized description I’ve found 🌟🌟🌟 Bravo! 🌟🌟🌟 & also appreciate your kind welcoming personality. Well done & you have improved my studio knowledge 🌟🌟🌟 thanks! Yay you! 🌟🌟🌟 (& so sorry to hear of your challenge with finger control…. I take a medication that gives me shaky hands…. Healing and love to us both ❤️)

@HobbyBloxs Жыл бұрын